monitor not showing anything after the first boot , but my computer runs and i can hear the windows startup sound but after restarting my computer it works fine , also sometimes my monitor shows everthing but on my desktop icons are big.
View 4 Replies
I'm using 64 bit win 7. Monitor not showing up in device manager. My monitor is samsung 2232bw.
View 4 Replies View Relatedi have a Sapphire hd 7850 graphics card and two monitors connected to it one hdmi one dvi-d. both screens are showing the same image and when i go into screen resolution it shows only one "generic PnP montitor". this was a fresh install of windows seven and it did work before that. the driver for the graphics card is saying "standard VGA adaptor" is this normal
View 1 Replies View Relatedi have just finished a remote assist with Microsoft to try to resolve a problem i am having with my win 7 os. It appears from my trolling the forums that it is not an uncommon scenario. As i use my machine i see the memory monitor gadget showing more and more usaage of ram until finally i get a "not enough resources to run application" prompt.
The guy from microsoft cleared my cookies, my prefetch files, google toolbar etc without effect. He suggested that some of my optimising utilities could be the problem until i explained that i had installed the to try to CURE the problem. He finally cleared off without saying anymore and i was left a link if i wanted to resume the chat support. This link didn't work. Any comments would be great.
I have a home built Rig. Running Windows 7 RC 7100. Very happy with it. I just had a DVI/HDMI adapter, 15ft HDMI 1.3 cable and a 20ft coax cable delivered. MONOprice.com for the win on those(less than $20 delivered in less than a week)
Anywayz, I set up the cables and all to my Toshiba 37" LCD 37HL67 and the coax to my reciever. audio is working. And even the dual monitor set-up thru Windows 7 works great. However, I am having a "desktop fitting the FULL screen" problem.
It is showing black barz top, bottom, left, and right. Not fitting the complete screen. My TV res is 1366x768. which i have win 7 set to. it seems to be the fullest on the entire screen. But not completely. It does not matter if i make it the main mont or not. Wont change. My GPU is a ASUS 4830 from Newegg(another winner ).
I do have the latest drivers and even tried to play with the CCC and started seeing problems becasue i was doing a trial and error sesh and i stopped quickly. I am not PC inept but I am not the most savy creature either. This one is beyond me at this point.
I open a program and it opens on the monitor. I think restore the size, rather than having in maximum size.
The program disappears, but is still in the task bar. I click on the program icon in the task bar to make it appear in the monitor, but the program shows to open on a non-existent monitor on the left of my monitor.
I have checked Display adapters in Device Manager and they are working ok. I have checked Control PanelDisplayChange Display Settings and all looks ok.
Everything has worked find until recently. No real changes, however I suspect Microsoft Windows 7 is doing some dirty tricks after I have made multiple complaints about their poor customer support on the phones.
[URL]
i am using Windows 7 ultimate with lg 32' tv as monitor, but since yesterday it has started showing black handles on the the sides.
I have tried changing the resolution but its not helping. i use Windows 7 ultimate.
Right, when the monitor (rather old 16" Sharp LCD monitor) is showing the colour white (such as a Google search results page, GMail inbox etc.) I can hear a rather audible high pitched buzzing sound, no matter what brightness the screen is on. Any ideas as to why? I'm sure there is a scientific/electronic reason as to why, it's just I'm not sure what that reason is
View 4 Replies View Relatedmonitor is showing a message "control menu is lock" all time.
View 1 Replies View Relatedwhy my pc is not showing boot from cd option in boot time
View 1 Replies View Relatedwindows 7 boot screen isn't showing ,its still showing the vista green bars . ive heard if youre resolution is too low it doesnt show my current res is 1280*720 but even if i switch it the res to 1920*1080 it still doesnt show ..im using HDMI cable and using my tv as a moniter ..why you think its not showing?
View 9 Replies View Relatedmy system is dual boot window 7 and window xp . win 7 is running good but when i open win xp in screen showing out of range 90.50kHz/50 . i want to hide thIS.
View 3 Replies View Relatedi am having some problems with my PC. First off, I'm having a problem with the new ATI catalyst drivers and games. I get a lot of artifacts in the games such as MW3 and I've tried everything from uninstalling to searching the registry for entries about ATI and AMD.Thats not why I'm here though. I want to try a factory restore. I've backed up all my important information so I'm ready. The problem is when I press F8 at boot, I get no options. My PC - a Dell Inspiron One 2305 did not come with any disc.If it helps I had to do a factory restore before when I had a bad virus. I had to use a program called EasyBCD?
View 5 Replies View RelatedI have ASUS PC (model: P5MG-ZX). I want to install windows 7. How to make a proper boot setup. I tried many times but failed to set my boot setup. I tried to install windows through USB but pc starts normally. It's not showing me the option "press any key to boot from CD/DVD".
View 8 Replies View Relatedevertyime i load windows the boot manager pops up showing 6 different windows installations. I have been troublshooting of late so have been installing/reinstalling windows. The thing is, i have formated each prior installation before installing a new one yet boot manager keeps popping up during OS loading showing me several different options. All of them except for the most recent have no data showing the formating worked. How do i prevent boot manager from showing all these old installations?
View 4 Replies View RelatedI once used Auto Super Grub to try to fix a boot problem of mine. But it didn't work, so I just reformatted my computer. however, Auto Super Grub still shows up on my boot screen, so I have to choose between Windows 7 and Auto Super Grub even though Auto Super Grub was uninstalled a long time ago.Here are some pics of what I see.Through msconfig, I see one OSHowever, 7's default OS menu shows me bothThen bsdedit shows me 7 as a option, but also shows Auto Super Grub
View 2 Replies View RelatedFor some reason, recently, my computer has become very slow after I login. I type my password and start to login and it takes like 30 seconds to see the desktop.Is there a program out there that you would recommend that monitors all processes and applications that start (after login, not necessarily at bootup, if there is a difference)?
View 1 Replies View RelatedI have a new toshiba laptop that the O/S failed to load after shutting down. It hangs at the bootup level when showing the windows logo.
View 1 Replies View RelatedI built a new PC about a month ago. BioStar A880GU3 and an AMD Athlon II X3 455 CPU. Also running Windows 7.
I set up two monitors and have them set to extend. Everything has been great up until about a few days ago. One morning I turned the PC on and my 2nd display was totally black. It was turned on and Windows was detecting it but I couldn't see anything. I drug a tab from Firefox over to the monitor and dropped it and the screen started flickering and eventually came on. Everything was cool for the next two days.
A few days later, it happened again. This time, I could faintly see that the screen was on just very dark because I could see the outlines of the Firefox window I drug over there. Now it happens every time I turn the PC on. It eventually stats flickering and comes on on it's own and stays on until I shut the PC off again.
I also can't even see the monitor's menu when I press the menu button on it. Does this sound like an issue somewhere in Windows, or just a failing monitor? It's a bunch of years old and was sitting in my basement for over a year until I built this new PC. I'm just curious because it worked fine for weeks after I started using it again.
i just recently built a new gaming rig and am running an SSD for boot up.
Everything turns out just fine except when after the windows logo appears, I can hear a little crackle noise from my headphone then the monitor loses signal and my g15 keyboard LCD turns off, then a few moments later my monitor and keyboard comes back to normal and i am a the login screen. It is not a big deal but am just puzzled at why it would do this.
It does slow down my boot speed by a lot especially for an SSD. Anyone know how i can speed this up? Someone told me disable USB 3.0 to speed things up. Any problems with Asrock MOBO drivers that could affect this?
OS: Windows 7 Home Premium x64
i7-2600K CPU @ 3.40 Ghz
OEM
8Gb RAM
Asus P8P67Pro
Harware & software build around 6 months old
BIOS, Windows updates and Driver updates applied regularly.
A couple of weeks ago i had a BSOD. Since, when trying to boot, most of the time my monitor turns ON, OFF, ON, OFF, etc...for some time, very rarely leading to a successful boot. No problem accessing Recovery options or BIOS.sometimes (very rarely), it does boot up normally.I have tried everything i can think of (with my limited knowledge).
So I just got a new gateway dx4860-ub32p tower. The problem I am having is that when trying to use a second monitor for extended desktop the hdmi is not recognized. When I start the computer both monitors have the boot screen and starting windows screen. Past that only my monitor plugged in by vga cable is recognized. When I go to graphics options there is only one screen option shown. I am using windows seven the second monitor is a flat screen tv.
View 1 Replies View RelatedI have a toolbar on my taskbar titled "Programs". It has about eight folders in it. I made another toolbar, and placed it directly adjacent to the Programs toolbar, to obscure the eight folders and force it to be a dropdown menu.Trouble is, as soon as I lock my taskbar, right next to the arrow that displays the eight items of my Programs toolbar in menu-form, one of the eight items is showing up as an icon, as if the other toolbar isn't close enough to the Programs toolbar in order to completely obscure the eight items.
View 2 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View Relatedi protected password for my pendrive it is kingston 4gb then it showing 3.75b, but in properties it has been showing 576 kb how to get my original size (3.75gb)
View 1 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
