I once used Auto Super Grub to try to fix a boot problem of mine. But it didn't work, so I just reformatted my computer. however, Auto Super Grub still shows up on my boot screen, so I have to choose between Windows 7 and Auto Super Grub even though Auto Super Grub was uninstalled a long time ago.Here are some pics of what I see.Through msconfig, I see one OSHowever, 7's default OS menu shows me bothThen bsdedit shows me 7 as a option, but also shows Auto Super Grub
my problem is that now i have two operating systems:
1)XP Sp2
2)Linux Fedora
now my boot loader is GRUB and with that i select which of them start,the default is windows Xp, now i want to delete linux and just have windows xp and then install windows 7.
so i think i shoud first change bootloader and then install windows7,but i don't know how to do this this.can u plz help me?
another thing where can i see windows7 requirements,and the file system for installing it shoud be NTFS is it right?
at least how many GBs shoud i have for installing it?
I just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
Ok so I have Windows 7 and Ubuntu desktop installed on my HDD. I used gparted and deleted my ubuntu partition and set it NTFS. But I forgot about the GRUB loader. Now when I boot up, I get the "error 22".
Anyways, how do I set it so I can just boot Windows 7?
Also! I'm on a netbook so it has to be a USB method.
I currently have a hard drive set as a backup drive but am getting the message that there's no room left on the drive to write the new backups. I have to go in and manually delete the old backups. Is there anyway Windows 7 can automatically do this to so that it can write the new ones? I couldn't find any and after searching Google it doesn't look like it's possible. Is there any way through Task Scheduler maybe?
I have a 2TB drive and I'm doing bi-daily backups to it of my build server I have (Its just a standard Win 7 Home PC).Problem I'm having is, instead of backing up and if the space is limited deleting the oldest one and keeping the newest its just failing?And I can't for the life of me see in the back & restore settings to tell it to do this?
there's a folder that users scan things into. however this folder needs to be cleaned up on a regular basis. to do this, I have created a .bat file that will clear up all of the documents in that folder. there is also an auto answer of yes so that when it prompts, it automatically replies yes. however, I'd like this to delete items say 2 weeks old and older. is there a way to do this?
How can I make windows auto boot to a program, withoutthe need of using the user interface, etcI heard of something like c:/autoboot.iniAlso is their a possibility I can easily make itskip Windows logo loadup sign, and go straight to the program?
I have a 64 bit system on my main drive and a 32 bit system on my secondary hard drive. When I start my computer it asks me which operation system I want to start windows in and I choose 64 bit. My hard drive with the 32 bit system is corrupted and I haven't used it in months so I want to remove it from asking me which system to run. I want the 64 system to automatically start without me needing to choose it.
PC boots normally, though somehow slowly � you can really hear the HD is working hard! Wireless is connected as it should, as one of the last tasks in the entire start up process. Good signal with 4-5 pins in the internet access icon down in the right corner of the lower menu bar, and no problems with connection to the internet. However, after 1 minute or so, I can hear the HD start working intensively again, and then it disconnects the internet access, shown by a red cross over the internet access icon. Just before that, the screen flashes a bit, and the color of the lower menu bar becomes slightly more pale, as if some booting is still going on. Going into the Services.msc, the WLAN Auto Config says that it is started, but opening it in �General�, it says Stop. When I click on Start, it reconnects and works fine again. If I do nothing, after yet another 2-3 minutes it tries to reconnect, and eventually after 5-8 minutes after reboot it is reconnected, and work fine again. I off course use Antivirus program (Microsoft Essentials) and have installed all the latest Windows 7 updates, including SP1.
I usually consider myself having some idea about computers but this things is out of my league. [code] My computer has been getting BSOD'S for several days after installing java 7 update 8.I somehow managed to get system back on it's track for few times with cd/usb booting but now, when i start it i just get a black screen no beeps at all and back, gpu and cpu fans are working on max.Tried reseting bios with clr cmos button and taking the bios battery out but nothing helps.I thought it could be hardware error and as there was black screen i suspected the gpu which was making problems before the fan came off so I replaced it with accelero l2 pro.I don't think it's the mobo problem because when i remove both ram sticks i get like 8 beeps until it restarts and everything repeats.But on the other hand how could it be hardware problem if comp autorecovered bios.I also thought about flashing the bios but the boot is set to floppy so i am not sure how would that work out.
so i came home from work and my pc was showing on the screen "BOOTMGR is missing" to restart pres ctrl+alt+delete. i have no idea what to do. i have beenrunning an ocz agility 3 60gb ssd as my boot drive for about 3 weeks and it has been working flawlessly. nothing in the system has changed.
I've just had a new mother board installed in my tower, now it's a Pent 4 3.4g. I used to have my two external HDD's connected to the old system configuration but now at startup, when it gets to Auto-Detecting External HDD's it takes for ever to do anything. I have to unplug them, then do a reboot and all is fine, but then have to plug them back in again.
I know from reading some post's that it's in the BIOS startup sequence but I'm not quite sure where and what to change in the startup.
In the BIOS Boot Device Priority I have: 1st - Floppy Drive, 2nd - [3M-ST3200800AS], 3rd - [ATAPI CD-ROM], 4th - [Disabbled].
I bought a Asus U36J laptop back in April of last year and ever since then I have been beating around an issue that I dont seem to be able to resolve one way or the other. When ever the laptop is on battery and in battery saving mode it has my taskbar on autohide. If I turn that off, then it stays off right until it is put back into battery saving mode at which point it is "magically" ticked on again.
Is there no way to simply disable that feature, as its annoying me greatly. I know its tied into the battery saving desktop, and I want to keep the battery saving desktop but want a full taskbar all the time. I found a supposed fix to make that happen, and while it actually makes the taskbar appear all the time, it still is a bad hack as any windows I have open wont "attach" to the taskbar but attaches to the buttom of the screen.
So for the love of god is there no sane way for me to keep the battery saving desktop but get rid of the autohiding taskbar. Otherwise I know Asus most likely wont be my laptop of choice next time aroumd.
monitor not showing anything after the first boot , but my computer runs and i can hear the windows startup sound but after restarting my computer it works fine , also sometimes my monitor shows everthing but on my desktop icons are big.
So I am having a problem and I am hoping that someone can help. On my desktop I recently installed Win7 on a 1TB internal drive. I installed it on separate drive then I had my original WinXP32 installed. So I could test out Win7 before fully transferring over. Well it worked just fine for that last 2 months and I finally decided to get ride on my older WinXP32 OS and run Ubuntu 9.10 on that drive.
After installing Ubuntu on my old WinXP drive (that was the original drive on my PC) I no longer can run Win7 I just get this Error (Grub Error 17) when I try to boot my system, but I can still run Ubuntu. If there is anyone out there that could give me some advice on how to get my Win7 OS to run again I would love some advice.
windows 7 boot screen isn't showing ,its still showing the vista green bars . ive heard if youre resolution is too low it doesnt show my current res is 1280*720 but even if i switch it the res to 1920*1080 it still doesnt show ..im using HDMI cable and using my tv as a moniter ..why you think its not showing?
my system is dual boot window 7 and window xp . win 7 is running good but when i open win xp in screen showing out of range 90.50kHz/50 . i want to hide thIS.
i am having some problems with my PC. First off, I'm having a problem with the new ATI catalyst drivers and games. I get a lot of artifacts in the games such as MW3 and I've tried everything from uninstalling to searching the registry for entries about ATI and AMD.Thats not why I'm here though. I want to try a factory restore. I've backed up all my important information so I'm ready. The problem is when I press F8 at boot, I get no options. My PC - a Dell Inspiron One 2305 did not come with any disc.If it helps I had to do a factory restore before when I had a bad virus. I had to use a program called EasyBCD?
I have ASUS PC (model: P5MG-ZX). I want to install windows 7. How to make a proper boot setup. I tried many times but failed to set my boot setup. I tried to install windows through USB but pc starts normally. It's not showing me the option "press any key to boot from CD/DVD".
I had windows 7 and i installed red hat linux by creating a partition.When ever i boot the linux is the default OS which will come up unless i dont select the windows 7 manually.Now i wanted to remove the Linux so i removed the partition from windows.After reboot i see GRUB.Can you let me know how to go ahead and boot the windows now.
I'm currently downloading it & spent the weekend creating a dual boot XP/Ubuntu. I don't want to mess up my system, so can I install 7 into a flash drive (usb)?
Other than that, if I created a new partition through gparted and booted from the 7 iso disk, would my GRUB notice this & respond?
i got a netbook recently with windows 7 installed, and found this free software "ubuntu" now am stuck with the "Grub" bootloader.
Does anyone know how i can remove this and return the netbook back to it's original state i've tried doing the Acer Recovery and it doesn't get rid of the Grub bootloader. Has anyone got any ideas??
I tried doing some things off the Linux website but i have no knowledge of linux at all it totally baffled me.
I'm trying to install windows 7 home premium on my hubbys laptop. He had Linux Ubuntu on it, which he wanted wiped. I tried just installing windows7 over the top of it but it wouldn't work...so silly me thought I'd have a go at wiping it myself!
Now I can't do anything and all I get is the following error...
Nothing else comes up at all and I can't boot any disc at all
I've already installed windows7 ultimate on my own computer but I had my pc partitioned with ubuntu and windows and (with some help) was able to install over the top of everything with no problems. Don't know what on earth has gone wrong this time.
evertyime i load windows the boot manager pops up showing 6 different windows installations. I have been troublshooting of late so have been installing/reinstalling windows. The thing is, i have formated each prior installation before installing a new one yet boot manager keeps popping up during OS loading showing me several different options. All of them except for the most recent have no data showing the formating worked. How do i prevent boot manager from showing all these old installations?
