Install Sp1 64bit Error Code 800f081?
May 22, 2012
i have Windows 7 64bit home premium and i try to install sp1 but i cant.after 45 minute this massage is shown: windows encounter a system file error(code: 800f081)and i try to download and install system update readiness tool but a cant cause this error when i try to run .msu installer :"intaller encountered an error 8007065edata of this type is not supported"in the download page of microsoft, the system update readiness tool reguirement is win 7 sp1 and i dont have sp1
View 6 Replies
ADVERTISEMENT
Jan 27, 2011
I have been encountering this same error code in one of my machines. I get the Error Code: 0x8007050 during installation of Win 7 Ultimate 64 Bit. It occurs during the expansion of files phase, during instalation, with the message "Windows cannot install the required files. Make sure the required files are available..."
Machine Specs:
Intel DP43TF MB
Intel Quad Core 8300 CPU
4GB OCZ ATI DDR2 RAM
Antec 500 Watt PSU
Hitachi HDS725050 KLA360 HD
and later a Seagate ST3640323AS HD.
In previous installations of Win 7, I've observed that about 29MB are copied to the System Reserved partition. In this scenario, only 11MB are copied. I've performed the following trouble shooting in order:
- Changed out the DVD drive. Tried installation again without success.
- Performed factory system restore on the hard drive. Tried installation again without success.
- Replaced the hard drive with a new one. Tried installation again without success.
- Removed all PCI cards, and tried again with just the PCI-E video card. Tried installation again without success.
- Replaced the PCI-E video card with a PCI card. Tried installation again without success.
- Cloned the "System Reserved" partition from another PC with a functioning install of the same OS. Tried installation again without success.
It should be noted that this specific machine was previously running Win 7 Ultimate 64 Bit. I was simply attempting to upgrade the hard drive. I've also tried to install Win 7 Home and Win 7 Pro, all with the exact same error code, which occurs during the same phase of installation. I also tried to perform an Upgrade install. The machine accepted a complete install of Win Vista Ultimate 64 bit (twice), but had the same error codes appear during the Upgrade install to Win 7 Ultimate 64 Bit. I reformatted and reinstalled same Vista 64 bit OS. I tried to install Win 7 Pro 64 Bit, and again encountered the same error codes. Incidentally, I have used 3 different Retail Win 7 install media. The machine passes all MemTest and CPU diagnostics.
View 3 Replies
View Related
Sep 11, 2012
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-73CQT-WMF7J-3Q6C9
Windows Product Key Hash: KaFG+RmurcM3ZxzWyfEP9WtPUJw=
[code]....
I downloaded a ISo file to flashDrive used JellyBean key finder and wrote the key down and then booted and reinstalled Windows 7 64Bit from flashDrive and now it gives me that error code saying The Software Liscensing Service reported tha the computer BIOS is missing a required License.
View 1 Replies
View Related
Aug 9, 2012
This error started right after installed 64 bit.I tried to install sound drivers but problem is still there , it cant detect my speakers i plugged in.
My Motherboard : ASUS P5KPL-AM SE
View 1 Replies
View Related
Oct 24, 2009
I'm having probleam installing the is UG version of Windows 7 Pro for students. I followed the directions here, and converted the iso into usb bootable disk, and everytime i run the disk it keeps getting me an error.
"Windows was unable to locate required installation file [boot.wim]. Verify that the installation source is valid. and restart the installation."
Error code: 0x80070002
I am trying to do a dual boot, keeping my current xp into Asus eee box b202.
Am I missing something here?
View 2 Replies
View Related
Jun 16, 2012
i have some problem can't install driver usb data link cable laptop toshiba stateleite L745 windows 7 text box : show error code 28 can not install driver .but this cable can in stall in win xp other laptop
View 1 Replies
View Related
Feb 13, 2013
System Info Utility version 1.0.0.2
OS Version:
Processor:
Processor Count:
RAM:
Graphics Card:
Hard Drives:
Motherboard:
Antivirus: None
I cannot install important updates not sure about much about my laptop apart from its a toshiba satellite pro on windows 7 an when i tryed to install them this code came up code: 80240016.
View 2 Replies
View Related
Jan 24, 2012
i had to reinstall my windows 7 64x dell inspiron 1750 laptop using my windws 7 home premium disc that came with my laptop when i bought it because it was in a constant starup repair loop. the disc worked find until i got to the part where it said "expanding windows files." it was stuck at 0% after a whilr and then a message popped up that said error code:0x8007045D. during the time when it was expanding windows files i could hear my disc running, but after a while it stops.when i tried running the disc again, the error code message didn't pop up, but the expanding windows files was stuck at 0% forever. when i tried turning on my computer without using the disc, it goes directly from the "finding window files" screen to startup repair. it tells me that it can't fix the problem and i click on a link that tells me that the problem is that my boot configuration is corrupt. i have also ried cleaning my disc and it doesn't look like there's any stratches on it.
View 8 Replies
View Related
Aug 10, 2011
Get an error code 8007371B when attempting to install this update. Tried the Microsoft FIXIT in both Simple and Advanced Mode. No luck! Also tried downloading the update and installing manually with no success!
View 9 Replies
View Related
May 7, 2012
emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.
View 9 Replies
View Related
Nov 2, 2009
If you just want the solution page down .. it's in this blue
New shiny windows 7 disk arrives. ...... doesn't want to install ...
keep getting error message 0x80070570 when Windows 7 is expanding files:
Quote: Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation. Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...
Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.
So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.
Always the same thing:
Quote: Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation. So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).
EASY SOLUTION:
I don't wait weekends for answers (nor do I usually need to call tech support). One thing we had noticed is that the repair console refused to lauch because it said there was an install in progress. But the support didn't pick up on this and it wasn't until Saturday morning I tried what turned out to be the easiest solution ever.
When you see the error "0x80070570 can't access files" on install click --> Cancel ---> you will be returned to the "Install Now" startup screen and - WITHOUT REBOOTING - just re-start the install.
Second time round it went smooth as clockwork and installed fine. I have not tried to reproduce this error as I just want a working system:
Be interested to know if this easy solution works for anyone else. I informed Microsoft of it when their engineer called today and they are going to look into it. They are aware of the install issue but never heard of this fix before.
View 8 Replies
View Related
Jan 4, 2013
I'm havin' a bit of trouble installing Service Pack 1. Either that or Windows Update wants to make an excuse and stop the installation halfway and then spit out a random error code. Failed - Error Code 8024200DWould downloading the MSU file help resolve what's halting the update process?
View 2 Replies
View Related
Mar 19, 2009
there people ive just done a fresh install of windows 7 7000 x64 and went to set up my tv tuner and on install got to playready part and it said it cant install this which means i wont be able to watch television anyone help please.
View 4 Replies
View Related
Sep 9, 2010
savvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
View 2 Replies
View Related
May 17, 2011
When I try to install W7SP1, I get an error message after it tries to install after restarting after having downloaded it in Windows Update. It's error code 0x800f0826. IT used to be 0x80071a9, but I fixed that I think.
Note: My laptop does not have a built in disc reader, because of its design, nor did it come with any W7 CD's.
View 5 Replies
View Related
Apr 25, 2009
ive got a Problem installing build 7100 on my pc. if i boot from dvd, iam going well until the wallpaper and the mouse appears. after 5mins of waiting here iam getting a BSOD with an 0x0000007F Error Code.
If i try to install b7100 into a VM (with the DVD) it works!
And if i try to install/update the pc via the booted windows 2008, it also works!
Only if i boot from the dvd and try to install, it failse.
Iam allready tryed various options (remove USB,remove NIC, burn again(slow), vertify md5/sha1,removed raid) but always the same story.
View 2 Replies
View Related
Jan 12, 2013
I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem[CODE]
View 5 Replies
View Related
Apr 15, 2012
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
View 1 Replies
View Related
May 7, 2012
I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies
View Related
Dec 24, 2011
I have Dell Inspiron N5010. I was using windows 7 home basic 32 bit os. I wanted to change it to windows 7 ultimate. So I have inserted windows 7 Installation disk into CD drive. Then I went to through the installation and I chose the Custom as the installation type.When the partition page appeared, I have formatted all the disks including C which contains windows files. Then I got 298 GB unallocated space. Then I split them in to 4 partitions. Then I have selected one partition to install the windows. Then installation started .
Copying windows files succeeded. Expanding Windows files(0%) is still be like that for 20 minutes. Then I got the error message like: "Windows cannot install required files. Error code 0x80070017". And I thought it would be the installation disk problem. But it works fine in other systems. I tried several disks. No use. Also I got another problem. When system boots I tried to enter into BIOS using F2 and F12 which was mentioned in screen. But it did not enter into the BIOS, Instead it goes to the installation.
View 7 Replies
View Related
Aug 20, 2009
I am attemtpting to install the win 64bit 7 RC on a brand new build. I am using a USB stick as my install media. The install boots, although it takes a VERY long time to get from when windows begins to load the setup files to the place where I have issues (about 15 - 20 minutes). Where the install crashes, is instantly after I choose "custom Install" and kicks back a 0xE000100 error, which is a general media error code.If I use the exact same USB thumbdrive on my 2+ year old Dell Optiplex 320 (which is a piece) not only does it get past the error point, but it gets there in about 2-5 minutes versus 15-20. It looks like the issue above crashed in the step directly before choosing the install partition - It never gets to the point were I can choose what drive or partition I want to use, but on the optiplex it does, and this is right after clicking "custom install" were my new unit crashes.
My Specs:
ASUS M4A79T Deluxe with Newest BIOS flashed
ATI Phenom II x4 955 Deneb 3.2 AM3 Black Box Edition
MSI R4890-T2D1G OC Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16
OZC Gold DDR3 1600 Dual Channel 2GBx2
250 GB Western Digital SATA HDD
40GB Samsung SATA HDDx2
80 GB Western Digital SATA HDD
View 3 Replies
View Related
Jan 7, 2012
I encountered an error that stated:windows can not be installed to this disk the selected disk has an MBR partition table on EFI systems, windows can only be installed to GPT disks."
Windows 7 Ultimate 64bit
INTEL 3930K
2 x GIGABYTE HD6970
CORSAIR Dmntr 4X8/32gb DDR3/1600
WD 2TB CAVIAR BLACK 64MB/7200PRM
CORSAIR FORCE 3 120GB SSD
ASUS P9X79 DELUXE MB
CORSAIR H100 COOLER
CORSAIR HX1050W
clean install to mechanical not SSD so you can use ASUS software once WIN 7 installed to merge them with the "Marvell 9128 6GB port"...Regarding BIOS funnily enough I have seen images of the UEFI BIOS in forums with all 8 ports on the deluxe in SATA configuration in advanced settings however mine only shows six (and no duplicate for UEFI like other images of UEFI i've seen"?and I have updated the UEFI BIOS to the latest version..
View 8 Replies
View Related
Sep 19, 2012
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies
View Related
Mar 7, 2012
All of my computer updates have worked like a charm for me, except for Service Pack 1. It says it's always "downloaded", but it never actually succeeds on the installation process. The error code "800B0100" is something I have stuck in my memory, . So, I've tried ALL of Windows's fixes, with no result yet. Windows Readiness Tool doesn't work. I even had to do a factory reset once, due to a problem guess what? Still SP1 problems. All other updates download and get installed ASAP, but this Service Pack 1 is really making me think something's wrong with my laptop.
I've scanned my laptop several times, full scans, high heuristics, scanning PUP's, and even scans before boot, and a healthy laptop. No problem with anything, except no SP1.
View 4 Replies
View Related
Jan 19, 2010
In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
View 1 Replies
View Related
Jun 13, 2012
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies
View Related
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Sep 9, 2011
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
View 1 Replies
View Related
Jul 31, 2012
i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
View 1 Replies
View Related
Oct 10, 2011
I bought a dell XPS 420 64bit two years ago and a year later upgraded to windows 7 64bit (upgrade) . The last two years my hard drive has frozen and this summer required an additional hard drive. With some difficulty, I was able to reinstall the windows 7 upgrade witch had come in a box with no code numbers). I now have received on my computer notices from Microsoft that my use of windows will be discontinued in 30 days if I can not provide my code numbers! What do I do?
View 2 Replies
View Related
