Finding Code For Upgrade Of Vista 64bit To Windows 7 Home Premium
Oct 10, 2011
I bought a dell XPS 420 64bit two years ago and a year later upgraded to windows 7 64bit (upgrade) . The last two years my hard drive has frozen and this summer required an additional hard drive. With some difficulty, I was able to reinstall the windows 7 upgrade witch had come in a box with no code numbers). I now have received on my computer notices from Microsoft that my use of windows will be discontinued in 30 days if I can not provide my code numbers! What do I do?
while installing 7 H.P. it gets to completing installation then freezes up after computer reboots a warning message appears stating windows 7 has failed to install and resume after reboot, and then the same warning message appears.
I tried the roll back installation option and a message flashes on and off to quickly to read. and Vista will not come up to start over.
I have a laptop with vista home premium 32 bit.. (OEM)..No install disk But can make one.I was going to install it on pc. I have ordered an upgrade disk for windows 7 x64 professional.. I was wanting to put it on my pc. It is running Windows 7600-16384 at the moment. From what I see it seems I won't be able to upgrade because:
1. Vista home premium to Windows professional won't work.
2. You can't upgrade with windows 7600-16384 to RTM
3. Not sure about going from 32 bit to 64 bit.
I am correct in my thinking??? If so I may have to cancel my upgrade buy from Newegg..Or change it somehow.
Would I be able to do clean install (RTM) on the pc with 7600-16384 on there????
I've been researching online that there is ONLY one way of going to from version to version when upgrade from Windows Vista to Windows 7. For example, Vista Home Premium to 7 Home Premium. You technically (In Microsoft's eyes) can't go from Windows Vista Home Premium to Windows 7 Professional. People bought the $30 Student 7 Professional from DR when it was available, and had Vista Home Premium on their laptop.
Mistake? I don't think so. We are also assuming that you have a legitimate copy of Windows Vista Home Premium and Windows 7 Professional Upgrade. We also assume no liability for any damages or data loss this may occur from doing my tutorial..
First off we need things done before we can do the upgrades. (Yes Upgrades).
1. Backup everything you need saved (Make an image with Acronis or any backup program)
2. Have a copy of Windows 7 (Any edition works, I'll tell you why later)
3. Have a quite some time to do this (Upgrades took a total of probably half a day)
Assuming you did the first 3 steps continue....
So you have a DVD copy or image of Windows 7. Extract the image or copy the disc to a folder on the HD of the computer you are upgrading. We are going to be going from Vista Home Premium to Windows 7 Home Premium as this is the only way we can do it (THANKS MICROSOFT).
View the extracted dvd/image on your HD. You will see a Sources folder, and you will see a ei.cfg. This can be edited with Wordpad or notepad, either one will do fine. Read more at the forum...
Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data--> Validation Code: 50 Cached Online Validation Code: N/A, hr = 0xc004f012 Windows Product Key: *****-*****-73CQT-WMF7J-3Q6C9 Windows Product Key Hash: KaFG+RmurcM3ZxzWyfEP9WtPUJw=
[code]....
I downloaded a ISo file to flashDrive used JellyBean key finder and wrote the key down and then booted and reinstalled Windows 7 64Bit from flashDrive and now it gives me that error code saying The Software Liscensing Service reported tha the computer BIOS is missing a required License.
My wife has a toshiba laptop with legal copy Vista Business OEM on it, And would like to get Windows 7 home premium.If she gets the upgrade version can we just do a clean install or am i going to get in all sorts of problems? On my Desktop i just installed the upgrade on a clean hdd and had no problems but i did have the number for vista home premium.Can someone say on this forum just buy the upgrade and you have no problems or do i have get the professional or ultimate upgrade?
I'm installing this for a friend and she bought a Windows 7 Pro from digital river. She's using Vista 32bit home premium, and it won't let me do an in-place upgrade. She has a lot of programs and I don't wish to re-install one by one, especially when they're programs in Japanese.
I successfully bought the upgrade version of Windows 7 Home Premium N, downloaded and extracted it and now I want to install it.
When I choose UPDATE in the intallation dialog it tells me that I cannot upgrade from Vista Home Premium to Windows 7 Home Premium ???
Every website from Windows and other people tells me that it IS possible and even the Windows 7 Update Advisor told me that I should not encounter any problems upgrading.
Has anyone of you yet encountered upgrading problems of compatible Vista/7 versions?
Or any other idea what I can do to solve the problem?!
I know that I can make a clean intall of 7, but this would be a pain..
I am running Windows Vista Home Premium on my Dell Inspiron 1721. Can I upgrade to windows 7 Ultimate 64 bit software. I have purchased Windows 7 Ultimate and received both 32 and 64 bit software discs.
It said it couldn't upgrade from my Vista Home Premium and had to do a custom install clean on top of Vista. I have not gone any farther than to see the installation finished and I see that it saved my Vista files in Windows.old.
I sure thought Win & would upgrade from Vista. Now I have to reinstall all my apps again. And if I'm going to do that anyway I might just as well install the 64 bit version instead of the 32 bit I installed.
Is this best?
I have MS Office 2007 as well to reinstall. Does it work under 64 bit Win 7?
I downloaded the 64bit release candidate yesterday and tried the upgrade from Vista Home Premium SP1 64bit. Everything checked out fine and the upgrade started... when the last stage is around 66% complete I get the message:
Werfault.exe application error, the instruction at 0x76B93892 reference memory at 0x00000000, the memory could not be read.
The installation program rolled back, which was very nice! I made a few changes and tried it another couple of times with the same result.
My system has an Asus M2N32-SLI Deluxe motherboard, AMD 9850 X4 cpu, 4GB memory, EVGA GTX 295, two Maxtor hard drives - 300GB and 500GB, 2 DVD drives, etc.
Anyone have any suggestions other than a clean install? I had tried the Win 7 beta version with a clean install and that had installed but that was all I did with it.
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
I had a fully activated and legal copy of Windows Vista running on my computer 3 months ago. I formatted my disk to install Windows 7, thinking I will activate with the upgrade key I bought.
How do I upgrade now?
Please tell me there is way to do it from within Windows 7. I have installed all the programs I want and have it running exactly the way I want it.
Don't tell me I need to clean install Win 7 again?
Having read some threads I am under the impression I won't have to purchase another copy of windows but I was wondering what I will have to do in order to continue using the same copy of windows.
Some people have indicated that I will need to contact Microsoft but I couldn't determine if they meant the automated phone number used to activate Windows or if was another number?
I am currently using Vista Business and want to install Windows 7 Home Premium.
Upgrade Advisor does not show Home Premium as an upgrade but I don't need anything more than that and don't want to pay the full price for what is basically a downgrade.
It doesn't make sense that I would have to pay for a full version of Home Premium when I already have a Vista Business version.
For now i think i will try to upgrade from my Vista 64 bits home premium (working well) to Windows 7 home premium 64 bits because i don't want to reinstall all my softs
But if after it seems to have problem with upgrade can i use the same Dvd and try an clean install on my first installation??
Yesterday I was messing around on my brand-new laptop, and I was stupid enough to try a keygen to get Ultimate (I had HP). Surprising. It worked but the copy wasn't genuine obviously. So then I rebooted, pressed F8 at boot. An ran Toshibas recovery to try to get the computer to its out of box state. I got stuck at initializomg (either that or I was impaptient) so I turned off the laptop. Then when I truer to boot I got bootmgr is missing. I have an old vista Hp disk so I installed that for the time being. So my question is, how do I get it back to the original state? I do t have any important data or anything.
The original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
I have done a Google search and been the the Microsoft site. I have tried every suggestion: clean boot, MS Update Readiness Program, MS Fix-it Program, Update Reset, disabling my AV and Firewall, Manual and Automatic Update but nothing allows me to update KB2484033, KB2511250, or KB2522422. I have tried 3rd party programs to include: HijackThis, MT RUbot, ComboFix, and FixCleaner and they haven't helped. I have Spybot, McAffee, MS Defender, and I use Windows Firewall. All of these are current and update with no problem.
Having used the Microsoft upgrade advisor, I bought a download of Windows 7 Ultimate 32-bit. I created the ISO disk as advised and started the installation. The installation seems to go fine until the end when I get the message that upgrade was unsuccessful and Vista is being restored. No other message is given. Antivirus (Kaspersky) is turned off for the install. Its starting to drive me mad...
Admittedly I feel a little late to the party with Windows 7 (what with 8 being on the horizon) but after several years (!) of plugging away with Vista Home Premium on my laptop (used every day for work), I'm at the point where I need to update it.Don't have the money to replace it outright, and it's also recently had a new HDD and RAM upgrade, so I'm exploring the possibility of finally upgrading to Win 7 (particularly seeing as mainstream support of Vista has now finished).From what I understand, a clean install of Win 7 is probably better than an update over Vista (and I am happy to do a clean install as I have all programs and everything backed up), but the one thing I am unsure of is whether I can jump to 64-bit Win 7 Professional with the hardware specs of my machine.The laptop is an Acer 5103WLMi with the following spec (from System Information): [code] The Windows 7 Upgrade Advisor report seems to indicate that upgrading to 64-bit is possible on a custom install, but the IT tech I spoke to at work says that because System Information lists the System Type as 'X86-based PC' that it can only use a 32-bit version of Windows.
Intel DP55WB mobo with Intel i5 750 CPU. I tried to upgrade from Vista Hme Premium to Win 7 Pro using Win 7 Pro Upgrade disc; received an error msg saying that upgrade procedure was not allowed. I fell back to upgrading using a Win 7 Home Premium disc. Because the Win 7 Pro upgrade disc cost more than the Win 7 Hme Prem upgrade disc, I do not understand MS's refusal to allow this upgrade to a more costly product. I know I may pay an additional fee to upgrade from Win 7 Home Prem to Win 7 Pro; and/or use the Win 7 Pro upgrade disc to achieve the same step-up, but that burns two Win 7 upgrade Keys to upgrade one machine.
my old vista laptop died but i had been doing regular backups via my wireless network (using the windows backup/restore function..) to another pc in my loft.now my NEW laptop is win 7 home premium 64bit edition.My problem is i cant restore my files from the vista backups to the new win 7 laptop.the Windows 7 laptop can see the remote machine and all the directory structure and can see the "backup sets" but when i click on the set all i get back is "no backups found) and yet all the zip files and the catalogs ARE in the remote location.
I have this HP dv5-1110ee laptop which has an OEM licensed vista homepre and I wanted to upgrade it to win7 ultimate. I know I'll need the drivers for the laptop, just checking if I missed something?
I had an old HP laptop running Vista and the the video died but, the hard disk was still good. The computer itself was not worth repairing. I replaced it with a new Dell XPS running Windows 7. I took the old hard disk and installed it into an external USB enclosure. I can plug it into the new computer and transfer the data easily.But what about the applications, application data, user settings, etc.
I have set up a VPN in windows 7 and from my computer i am able to connect to it. I also tried connecting on a virtual machine and it connected fine(the virtual machine is Windows 7 as well)I have already opened ports in my router and both computers connect to the internet on the same connection.I also enabled ports on the firewall but with no success, i also disabled the firewall on both machines.the credentials im using are correct also as well as the name and i get the common 800 error?
just purchased Gadmei computer tuner USB 302E, it gets installed but m unable to run the application., I have windows vista home premium OS. do i have to install some additional drivers?
Windows 7 Home Premium 64bit: VPN connects and allows access to network's Unix Server, data entry, etc. However, Outlook 2007 receives but does not send messages, error 8x800ccc78. When the VPN is not connected, messages can be sent (and received).
