Getting A MEM_BAD_POINTER Error While Opening The Application?Nov 16, 2012
i m getting a MEM_BAD_POINTER error while opening the application what should i do?
i m getting a MEM_BAD_POINTER error while opening the application what should i do?
I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
I have a problem with OpenAL. If I start an application using OAL, the CPU-usage rises to 100% and the application crashes. Even the "OpenAL Audiodevice Enumeration" have got this problem.View 9 Replies View Related
When I try to open window defender in control panel. It gives a message "application not found". What shall I do?View 1 Replies View Related
Recently whenever I've used an .exe installer I'll get an error as soon as I click start after choosing the directory, in the picture example I include below, it's of SA-MP, but it happens with any installer I try and use. Installers have worked previously, it's only recently it's stopped working.The error is;Error opening files for writing?
What I've tried;
-Full system scan with Comodo AV.
-Revealed hidden files and folders.
-Run the installer in both compatability (Even though it does work on Windows 7, and as an Administrator).
-Also done the scan on CMD (can't remember exact command).
OS: Windows 7 Home Premium 64bit.
I have a Dell Inspiron 560 and Windows 7; previously I had a Dell 5 years old and Windows XP. I am trying to access a website I have used previously with success but now am receiving error msg: Server Error in '/' Application, Runtime Error. I was able to access this website on my old system.View 1 Replies View Related
I've been receiving a runtime error for over a week (see below) in IE8 when atempting to go to a specific webpage. At first glance, it looked like a server issue (mine) or a website "down" problem. After searching the web, I could not find a solution for this specific runtime error. There was a bunch of misinformation posted in other forums! The solution was so simple.... I cleaned out all cookies with CCleaner and the page was available.....This error does not show on a "pop-up" like the Microsoft samples. Thus, Microsoft was no help to me in this instance.
Server Error in '/' Application.
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
I have been having an issue with Windows 7 and a program called 'Jetcam' These errors appear to occur randomly and can happen 15 to 20 times in one day, others days it's fine.View 9 Replies View Related
I have start my pc with windows 7 then appication error found i click on ok button but its not close.View 3 Replies View Related
I recently had a virus (windows 7 antivirus 2012) and I removed it safely. Now I am having problems opening programs on my system all around and I suspect it is a registry problem. I could open the programs via "Run as administrator" but that is a huge hassle (my user account has administrator privileges.) Another thing is when I try to open the program and it has the "select from one of the following to open" window, usually when i select a program to open it with there's a bottom check box for "always use selected..." but that is grayed out... not sure what is happening.I tried to create a new user and that new user can open programs fine.View 5 Replies View Related
I just started getting this message when I open Itunes - "The folder "itunes" is on a locked disk or you do not have wriet permission for this folder"View 2 Replies View Related
I hooked another internal hard drive up to my computer. I already had two drives installed one SSD that has Windows 7 installed and one 1TB standard drive. I use the SD drive to install programs and keep files. After I installed the 3rd drive it changed my SD drive letter to letter E: and gave 3rd drive letter D: which is what the SD drive was before. Now when trying to do anything on the computer it pops up and says C:whatever the specified path doesn't exist.
When trying to do a diskpart from CMD I get the same error: C:WindowsSystem32diskpart.exe.
The specified program doesn't exist. Even though the programs is there. When I try and download a program it does the same thing. I don't have a disk I can use to change the storage drive back to letter D: I would have never thought this would happen since Windows is installed on letter C: and that is still there.
When Try to open (double click on mouse) any file/folder/icon deleting error comes. Error Says:- Are you sure you want to Delete the icon/file/folder from your desktop/folder/driveView 2 Replies View Related
This is my first time on the forums, so I hope I don't screw this up. I have searched the forums and not found an answer to this problem, so I hope I'm not re-asking an old question...
I am running Windows Seven Professional 64-bit and Windows Update isn't showing any more possible updates.
My computer is a Dell Precision M90 laptop with a Intel Core2 Duo 2.0GHz processor.
When I use Windows Explorer to open files that are associated with the program SolidWorks I receive the message: "There was a problem sending the command to the program."
I am running SolidWorks 2010 Professional SP0 which is a 3D modeling program for mechanical engineering. The program ran under XP without this issue.
I only receive this message if there is not an instance of SolidWorks running. Even after I receive this message, SolidWorks still loads and opens the file I selected through Windows Explorer.
This problem occurs no matter where the file is located (network or local).
This problem doesn't keep me from getting my work accomplished, but it is a bit of nuisance. Any help that anyone could offer would be much appreciated. I'm including a screen capture of the message.
popup error loading dll when opening IE 8 or 9 the comp is a hp 64bit win 7View 2 Replies View Related
I keep getting this bex error for explorer.exe, but that is only when I open a certain folder. It contains no special file formats, just mp4 videos, like all other season folder of that series. So far all other folders, including those that contain same file formats have opened without encountering problems. [code]View 2 Replies View Related
I just got a brand new Touchsmart 300z running Windows 7 x64 Home Premium. I set up Windows Media Center, and added Mediabrowser for better TV show support.
Mediabrowser sometimes behaves normally, other times it gives me an INVALID APPLICATION unable to launch Mediabrowser error. I usually don't get the error when I first launch Mediabrowser. I usually get it (only sometimes) when entering one of the media collections, trying to play a video (again, only *sometimes*), trying to save settings, etc. The crazy thing is, sometimes it works.
It does seem to consistently give me the error for some video files. For others it might give me the error *sometimes*. Sometimes I can play the file without problem, other times I get the error.
All files play correctly in native Media Center, in the Touchsmart software (which also doesn't support TV series collections very well), and WMP.
Thinking this might be a video-related problem, I also installed Heatwave, GameEx, and mcShoutcast. Heatwave also gives me this error -- SOMETIMES. mcShoutcast and GameEx seem to always give the error. For kicks I also tried TunerFreeMCE - always gives the error.
I have tried various things like manually deleting caches, changing permissions for the ProgramData folder for the plugin to allow everything from the user profile that I log in with to run Media Center... Nothing has worked.
Yet I can use the native Media Center capability for videos, music, Internet TV, etc.
Basically, the upshot is that NO PLUGINS WORK CORRECTLY. I suspect that it is at least partially due to x64, based on the fact that when others have had the same errors that could not be resolved using the normal fixes, they were x64 also. Seems like the 7RC had less trouble from what I have been reading...
I'm very frustrated, and am thinking of returning the s****y Touchsmart and building a Windows 7 32bit or Vista 32-bit box... Maybe using XBMC or something and skipping the tuner all together, though the husband would really like to watch live sports OTA.
When I run a certain application, I get the error that Flash.OCX is missing.. Where do I get flash.ocx, or how do I fix this?View 4 Replies View Related
I recently had a virus-esque program on my computer called win 7 home security 2011. It was a fake anti-virus program that was telling me I had viruses in an attempt to get me to buy their fake product. Anyway, the program is now history but I am encountering more problems that may or may not be a side effect of the virus. When I try to open an application I get an error giving the file location of the application followed by the message "Application not found". I can get around this and open the application by following the file location given by the error message and opening it. It then forces me to choose which program to open it with, in which case I need to tell it to open it with itself...
This is very irritating and in many cases makes opening applications close to impossible. When I'm choosing the program to open it with, it won't allow me to check the box telling it to set the program as the default. Is there any way to solve this issue short of completely re-installing windows 7?
exe failed in windows7 why?View 2 Replies View Related
I cnnot open my Power Point files because of the application error 0xc0000005???View 1 Replies View Related
my powerpoint presentation at 2010 is not opening due to 0xc0000005. what should i do?View 2 Replies View Related
trying to open my ATX 2012 Tax program and get the following error message Sfs.Max.Shell.Loader has stopped working, A problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available.i have been trying for over a weekView 1 Replies View Related
I am trying to open a ftp address using windows explorer. This is for my school work. I have Windows 7. I entered the ftp address and received an error 550 system cannot find file. I tried changing files and folders settings to show hidden folders. I did everything I know how to do. I am hoping the instructor entered my info correctly to allow me access.View 4 Replies View Related
Trying to decide who to use for my Medicare Drug Plan, I'm getting this error message from this site (SilverScript). The error (on Firefox 17) occurs after I enter a drug and click enter.
as I need to make a decision before the end of the week.
I've been recently getting the BSOD when I open almost any program, when I try to open it my display stops and I get the BSOD error STOP: 0x0000001E. The latest thing I would have downloaded with suspicion would be a game torrent. I've gotten a BSOD error STOP: 0x00000050 and error STOP: 0x0000001a, but mainly error STOP: 0x0000001E. I'm thinking that my RAM is corrupted, looks like its a memory problem. I'm currently in Safe Mode with Networking. Anyways, sorry for using Winrar, I didn't have 7-ZIP installed.View 9 Replies View Related
I install directcom program for com emulator, here is software web, Code: SPIRIX Electronics Company / DirectCOM page When I open it, It open very slowly and after that It show this error, Quote: UFSx Direct Communicator has stopped working. error details,
Quote: Problem Event Name:APPCRASH
Fault Module Name:StackHash_ddf7
My computer has somehow change when running Windows Explorer. I used to be able to open Folders by Double-clicking on them. Now I get and error window that reads; "This file does not have a program associated with it for performing this action."
In order to open a folder, I have to Right-click on it and select the "Open" option instead of the default "Explore" option.
how to change the default back to the "Open" option?
Hey everyone, I am having an issue with my computer right now. When I boot it up, I get an error message reading " Applaunch.exe - Application Error" and then under it, it reads: "The application was unable to start correctly (0xc0000005). Click OK to close the application. Okay, so I click OK. After I click it, and around 5-30 seconds it pops back up again.View 1 Replies View Related
I get this error message in windows 7 and no one seems to know how to correct it. It specifically says it is a Windows application error so I contacted Microsoft and they say it is a software error. RoboForm says no, it is a Windows issue.View 3 Replies View Related
I have a new notebook with Win 7 Ultimate and added the xp mode so I could run my older programs. I am experiencing an application error �General Protection Default in Module WIN87EM.DLL". I researched the problem online and downloaded a file WIN87EM.DLL and added to the software directory. I also performed the compatibility option. The problem continues. My software is a horse handicapping system that processes past performance data files. I am able to start the software with no problem and even model one race file with no problem. Whenever I try to bulk model say 30 race files to build my database is when the error comes up. The software runs great on my old computer with Win XP..View 3 Replies View Related
I tried to un-hibernate my laptop this morning (I tend to only hibernate it overnight if I know I'm going to be using it immediately the following morning) and it won't let me log in.
By this I mean that it takes at least 15 minutes of the cursor in the middle of a black screen before it gets to the Login screen. The first time this happened, I was able to Login, but after that, none of the icons loaded up, only the taskbar. After which, a message popped up saying "WinLogin.exe - Bad Login". At which point I manually restarted the computer (as the Start button wasn't working) and chose "Start Windows normally." Now I am at the point that whenever it gets to the Login screen, it immediately restarts, and thus goes into a loop. I stopped this loop by manually restarting again, and selecting safe mode, at which point I got the following error message:
"WerFault.exe Application Error The instruction at 0x000007FEFD6C283C referenced memory at 0x000007FEFD6C283C. The required data was not placed into memory because of an I/O error status of 0xc0000185. Click on OK to terminate the program." This was the only action I could take, so I did so. This immediately followed by an identical error message except with a different code, which began 0x000077....I was unable to see the rest because at that point the computer restarted.
Upon the next restart, I received a Blue Stop error message, which displayed for a few seconds before shutting down again. Key words I managed to see include: "There is an error with the program. The system was shut down to prevent damage to your computer. ...crucial thread issue...."
I literally have no idea what to do. If booting in Safe Mode has no effect, what can be done? I have also tried pressing F8 at the Dell startup screen (where it says to press F2 or F12 etc) but this just froze the machine!
I am running a 64 bit version of Windows 7 on a Dell Studio 1555 laptop.
I tried to open ViewNX2 software and got the message "The application was unable to start correctly (0xc000007b). I have searched trying to resolve the problem but have been unsuccessful.View 6 Replies View Related
My computer has recently had this problem where it cannot continue to run normally for more that 5 minutes or so before it slows down then BSODs. It seems to start up normally and everything works just fine for a short amount of time until applications stop responding. Sometimes the taskbar disappears and there's an error message with the title of "jusched.exe - Application Error" without the quotes. When I click ok to terminate the program I just see my wallpaper for a few seconds before it BSODs. Other times it just BSODs after applications stop responding.The part after STOP always seems to be 0x000000F4, but I'm not sure about the rest.I'd also like to know if I need to wait a certain amount of time before I can shut down my computer during the BSOD. It seems to say something like "initializing the disk for dumping" for quite some time.View 8 Replies View Related
Every single time I run the installer for Gears of war PC a few seconds in the install I get this message:Error applying transforms. Verify that the specified transform paths are valid.E:hex(2):40,00,31,00,30,00,33,00,33,00View 4 Replies View Related
Since installing the latest Windows Update (Critical Update) I am unable to re-boot.The computer posts and gets to the windows screen and when about to load up into explorer I get the following error message in a Box. "The application was unable to start correctly (0xc0000022). Click OK to close the applciation. The actual application is explorer.exe. Application error. If I click on OK the screen goes blank. (Black screen) Hitting CTR ALT Del gives me the options but when hitting on Start Task Manager I receive the same error this time the applciaton being Task Manager with the same error code as above. I am able to start up in Safe Mode and have tried to both use the built in Startup Repair (which is unable to fix the problem) and also have tried to go back to a previous version via System Restore without any luck. The same errors appear each time.View 2 Replies View Related
I am running windows 7 ultimate 64 bit. Whenever I try open outlook or anything in office 2010 I receive the following error message: please wait while windows configures microsoft office single image 2010.View 1 Replies View Related
We are running an exchange 2003 server, with windows 7 machines (not ideal I know).
That aside, I am getting a scripting error when opening emails from a single user. This error ONLY appears on one users computer.So to clarify, this issue only pops up on one users computer, and only occurs when opening an email (even in preview) from another single user.
I have so far:
- Run a repair of office 2010 on the computer that displays the scripting error.
- Removed email signature from the senders computer, in case of problematic fonts (Even though to other users on the domain, this error does not occur when opening emails from this same sender.)
I am running windows 7 Home Premium 64 bit. Whenever I try open outlook or anything in office 2003 I receive the following error message: please wait while windows configures microsoft office single image 2003. The above error message is an identical message sent to this Forum by "drumstik59" but was for Office 2010 instead of Office 2003. This was solved by the reply given by "Irene" which is. paste the following commands one at a time and press ENTER.View 1 Replies View Related
Error: There was a problem sending the command to the program.
Windows 7 x64, Office 2007,
I have tried all options found on the web, and noe have worked!
check/uncheck DDE request
check/uncheck Run as adminstrator
In the event log Event log:The following boot-start or system-start driver(s) failed to load: PBADRV Process **mcshield.exe pid (2736) contains signed but untrusted code, but was allowed to perform a privileged operation with a McAfee driver.Process **VsTskMgr.exe pid (2472) contains signed but untrusted code, but was allowed to perform a privileged operation with a McAfee driver.are there any registry settings to change??are there any other top secret options to tweak?
I keep getting the following errors on startup and then after awhile they will pop up again and again.
Werfault.exe - Application Error
The instruction at 0x73f61320 referenced mamory at 0x73f61320. The memory could not be written.Click OK to terminate the program
(Same message and memory location)
Here is the TSG SysInfo log:
Tech Support Guy System Info Utility version 184.108.40.206
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 5610 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 595354 MB, Free - 401604 MB; D: Total - 14820 MB, Free - 1647 MB; F: Total - 99 MB, Free - 89 MB; G: Total - 953867 MB, Free - 877240 MB;
Motherboard: Hewlett-Packard, 358B
Antivirus: Norton Internet Security, Updated and Enabled
I am getting a Login Error on a Laptop. This is the error "The Application was unable to start correctly error(0x000005) click ok to close the application".View 3 Replies View Related
On windows 7 start up I get an application error: Exception 'EOleStsError' in odule DUMeter.exe at 000A3A1D. Then it says Catastrophic failure, Class1D. Can I resolve this Catastrophic failure!!!View 1 Replies View Related
Lately whenever I attempt to install a new application I get the "application has stopped working" error message. Has happened now with several different applications. Sometimes I get an installation error 1001. Does anyone know why this occurs? Do I have a corrupt system file or registry? I have tried several different registry cleaners to no avail.View 5 Replies View Related
I can reproduce it randomly, when I try to copy and paste files in some folderThis is a Windows 7 x64 Ultimate restored with a repair installCopying and pasting a new comctl32.dll from my Windows 7 disk in the path indicated below doesn't this issue[CODE]View 3 Replies View Related