I've got Windows 7 Ultimate x64 and when I'm installing driver and tuning utility for this mouse it says that everything is OK,please restart but then - I don't see icon in the right down corner of the screen that I can use to access tuning tool - for applying new button settings.. In Task Manager I see the process.
the print icon that previously was located at the upper left hand corner is no longer their or anywhere that I can locate. Yesterday I was getting messages that my wireless was not connected. that may be ok noq..I printed a statement..however no print icon?
My daughter was using my MSI laptop and when she tried to start the computer all that came up was a black screen with the cursor in the upper left corner. She selected the restore option which came up because the other options would not do anything. Is there any possible way to recover my files, pics, etc. or is it just gone now?
I have a dell pc with windows 7. The computer loads the dell logo, the screen is black with the blinking line in the corner. I have tried all solutions that I have come across, the fixboot, replacing config files and last resort, I did a fresh install of windows. After the fresh install of windows, it worked for a few days and now it is doing it again. What is my next option?
I've searched around for several weeks for a solution to this problem and have not yet found a solution that works for me...
I am running Windows 7 RC (Build 7100) on an extremely capable PC, but now, every time I start the machine up I get a completely black screen with cursor, and in the bottom right hand corner is the watermark,
"Windows 7100
This copy of Windows is not genuine."
I believe I know what caused this. When I first got the RC, I downloaded one of those patches that removes the watermark (Yes, I know I was stupid and shouldn't have ) and for awhile, everything worked fine. Then I found the above watermark sitting regularly on my desktop, as well as some "This copy of windows not genuine" Pop-ups from MS, so I clicked on resolve, and the MS website just said something to the tune of "This Windows OS is not yet supported" or something like that.
So I didn't pursue the problem any further. Now, every once in a blue moon it will let me access the desktop. When it does, everything is extremely slow, I can't use command prompt, and when I open control panel to look at my CD Key or to check that it is activated, in the spot where my CD Key should be, instead there is just this: ---
Sooo, I need to know how to re-activate Windows so I can actually use the computer again. Also, I can give any information you guys need. I really hope I can get this resolved soon, it has just been such a hassle.
have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected
What is the purpose of the buttons in the bottom left corner of the live TV screen?I would have thought MS would have taken the effort to put bubble popups on all of the controls or at least to publish a guide; I can't find a definitive guide anywhere !Secondly, does the Media Centre capture use of the remote control to itself? My remote does not work in WinTV-7 since I activated live TV in Media Centre.
Blank screen with underline in upper left hand corner. nothing else. the only response I get is ctrl +alt+ delete, the red compaq logo comes on,then back to the underscore.nothing is responsive. If I hold down ctrl +alt+ delete an dhit any key I get a morse code bing.
Blank screen with underline in upper left hand corner. nothing else. nada. the only response I get is ctrl +alt+ delete, the red Compaq logo comes on, then back to the underscore. nothing is responsive. If I hold down ctrl +alt+ delete an dhit any key I get a morse code bing.
My dell inspiron 537 decided to completely stop working it has a blank screen with a blinking cursor in the left corner Alls I wanna do is get into the start up menu only options I get are f2 and f12 which are useless.
i just got windows 7 and when i first turned on my new computer there was a icon box at the very top with a media icon, security icon, internet icon, and i believe an email icon(and a couple of others). so anyway the box is gone now and i want it backdoes anyone know what it is called so i can read up on it or even better does anyone know how to turn it back on.
I wasnt quite sure where to post this but when i start my machine and the "starting windows" screen comes up there is no Windows 7 icon on the screen or anything. I just get a black screen with "starting windows" written at the bottom. Ideas? I'm not dual booting by the way.
HP, win. 7, IE 9, 1 1/2 T. Every time I update windows, the network icon appears. Windows won't allow it to be removed. I usually restore to former day, but am tired of dealing with it. How does it come off the screen?
No big deal, but would like to understand what might be happening.
Have "ClipTrak", a cliboard extender on my PC, and an icon to open it up was placed automatically in the area on the bottom of the screen, extreme right.
Not sure of what this area of the bottom taskbar bar is called; start-up, perhaps ?
It stays there for hours, works as it should, then totally disappears until the next PC
I restored my computer successfully but I still got the blinking cd icon next to my mouse pointer. After I restarted my computer I got Windows 7 with a clock and "2 min" under it and then it went to a black screen with blinking cd icon. I don't understand what is going on. I can get into task manager and type in explorer.exe but that doesn't do anything. I also tried the Regedit fix, but that didnt do anything too. I need help on how to fix this. My CD Rom won't even open for some reason.
I used the tutorial to change what the default logon screen is, which is super awesome that it was so easy to change... but I was wondering if its easy to move the size/position of the user icon? Any info would be great!
When I used to boot my computer it went to the Windows 7 screen with my username, large icon above it, and a spot to enter password below. Recently it started going to the same screen upon bootup, only now my username and icon are smaller than before and I must now click the small icon before it turns big, and then I can enter my password. how to go back to bypassing this annoying extra click before entering my password?
I've just recently started using my new Thinkpad with Windows 7 installed. Since late this morning a strange icon has appeared on the right side of the screen, whatever program I am running. It looks to be about 10% of the vertical size of the screen, is fixed, is a black rounded square and contains an arrow head pointing up standing on a narrow base outlined in white. The arrow head contains a capital A with a backward slash over it, and the slash extends out of the arrow head at the top. What this might mean, and how I can remove it?
Upon starting the laptop it goes through the standard Starting Windows screen and then i get a black screen with the mouse icon visible and movable however the logon prompt never appears. The same happens when starting in safe mode however an error is displayed stating:Logonui.exe : The Application was unable to start correctly 0x000006 I have performed a chkdsk on the drive and also run windows repair performing startup repair that found no issues. No restore points have been created so cant try that either.t command prompt i have tried:bootrec /fixbootbootrec /fixmbrall to no avail.Other than recovering the users data and re installing the machine from scratch is there any trickery i can perform?
I have just bought a new ssd for my desktop and have winodws running on my old 500GB hard disk.I installed windws 7 home 64 bit on my new ssd and have winodws ultimate on my old HDD.I the booted it from my ssd and it ran fine then I formatted my HDD with the old winodws using mini-tool Partion and had to restart to format. The HDD did have a system restore Partion but my ssd did not, now when I boot from my ssd a white line just shows up In the top left corner.I have Tryed windows startuP repair but no luck.
I have in my WPM 12 library where if an album has songs with two different file types they get there own album with the file type on the icon (for example I have Circus Animals by Cold Chisel shown twice one being m4a file type and the other mp3 file type). I have before fixed it so the file type is removed and all songs go in the one album but have forgotten how to do. How to change it?