Black Screen With Cursor And Watermark In Right Hand Corner
Aug 3, 2009
I've searched around for several weeks for a solution to this problem and have not yet found a solution that works for me...
I am running Windows 7 RC (Build 7100) on an extremely capable PC, but now, every time I start the machine up I get a completely black screen with cursor, and in the bottom right hand corner is the watermark,
"Windows 7100
This copy of Windows is not genuine."
I believe I know what caused this. When I first got the RC, I downloaded one of those patches that removes the watermark (Yes, I know I was stupid and shouldn't have ) and for awhile, everything worked fine. Then I found the above watermark sitting regularly on my desktop, as well as some "This copy of windows not genuine" Pop-ups from MS, so I clicked on resolve, and the MS website just said something to the tune of "This Windows OS is not yet supported" or something like that.
So I didn't pursue the problem any further. Now, every once in a blue moon it will let me access the desktop. When it does, everything is extremely slow, I can't use command prompt, and when I open control panel to look at my CD Key or to check that it is activated, in the spot where my CD Key should be, instead there is just this: ---
Sooo, I need to know how to re-activate Windows so I can actually use the computer again. Also, I can give any information you guys need. I really hope I can get this resolved soon, it has just been such a hassle.
View 6 Replies
ADVERTISEMENT
Jun 30, 2011
My daughter was using my MSI laptop and when she tried to start the computer all that came up was a black screen with the cursor in the upper left corner. She selected the restore option which came up because the other options would not do anything. Is there any possible way to recover my files, pics, etc. or is it just gone now?
View 4 Replies
View Related
Oct 22, 2011
My dell inspiron 537 decided to completely stop working it has a blank screen with a blinking cursor in the left corner Alls I wanna do is get into the start up menu only options I get are f2 and f12 which are useless.
View 2 Replies
View Related
May 11, 2012
Blank screen with underline in upper left hand corner. nothing else. the only response I get is ctrl +alt+ delete, the red compaq logo comes on,then back to the underscore.nothing is responsive. If I hold down ctrl +alt+ delete an dhit any key I get a morse code bing.
View 2 Replies
View Related
May 11, 2012
Blank screen with underline in upper left hand corner. nothing else. nada. the only response I get is ctrl +alt+ delete, the red Compaq logo comes on, then back to the underscore. nothing is responsive. If I hold down ctrl +alt+ delete an dhit any key I get a morse code bing.
View 6 Replies
View Related
May 29, 2012
Blank screen with underline in upper left hand corner
View 2 Replies
View Related
May 6, 2009
Using a booting USB and selecting clean install, the install completes mostly, it reboots a few times like normal. When it should be time to enter the key, the screen is completely black *except* for the Windows 7 watermark.
Are there any known issues with this board and the on-board graphics chip?
Can anybody recommend a HDMI card to drive my Plasma Display that has good 7 support?
View 3 Replies
View Related
Mar 19, 2012
have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected
View 1 Replies
View Related
Jan 12, 2013
I cont see the tamil icon in my lap top.
View 1 Replies
View Related
Jul 7, 2012
I have in my WPM 12 library where if an album has songs with two different file types they get there own album with the file type on the icon (for example I have Circus Animals by Cold Chisel shown twice one being m4a file type and the other mp3 file type). I have before fixed it so the file type is removed and all songs go in the one album but have forgotten how to do. How to change it?
View 4 Replies
View Related
Jan 28, 2013
the print icon that previously was located at the upper left hand corner is no longer their or anywhere that I can locate. Yesterday I was getting messages that my wireless was not connected. that may be ok noq..I printed a statement..however no print icon?
View 2 Replies
View Related
Oct 7, 2012
When I turn on the screen of my PC I get weird shapes all over the screen. Some of them are coloured, some are grey but they appear on all programmes, including a Word blank page and the desktop page. Some of them flash, some of them change shape, ut they are all pixel shaped within the boxes. There are also some strange 'squiggly' marks on the screen. When I opened Windows mail, the left hand side of the screen was completely black and it didn't show any of my messages. As I'm typing this message, I've got grey boxes which change shape as I type and it's covering some of the text.
View 13 Replies
View Related
Dec 5, 2011
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Apr 29, 2012
I'm having black screen with cursor only on my laptop! I just restarted my computer because there was a message prompt from my antivirus (AVG) to restart to finish the update. When it restarted all I got was a black screen with cursor only. Same thing happens when I boot to safe mode. Start up repair and system restore cannot fix it automatically. I even tried the crtl+alt+delete. doesn't work either. I'm using dell n4010, windows 7.
View 2 Replies
View Related
May 8, 2011
I have Sony Vaio which is just 1 yr old. About a week before, I installed the latest updates windows 7. When I started the windows, I was able to log into the windows. But then, the system was very slow. So, I turned down the laptop. After that, a message appeared "A disk error occurred. Press Alt+Ctrl+Del". When I press it, the same message appeared. I tried to go from the safe mode and there is a blank scree with a cursor. I cannot do anything with the cursor. No right click. No task bar and even tried pressing shift 5 times. Every step leads me to the same screen. I even tried to get to the vaio recovery for setting it into the default factory settings.
View 3 Replies
View Related
May 18, 2012
i have a hp pavilion dv6z-6c00 running windows 7 home premium 64-bit and it's messed up. a week ago i let the battery run out and when starting it up again, i noticed the windows logo page was in a version close to safe mode. right after, instead of going to the log-in page, all i got was a black screen. left it like that for a while and no change. i then proceeded to restart the laptop numerous times and i still got the same thing. sometimes with a cursor but more so without. i have looked online for solutions and have read multiple incidents where it could be a problem with the start-up with my processes. yet i have not found one closely resembling my situation. some solutions recommended doing some diagnostics and memory tests to find out more info. i would try that with the built-in windows version and it would get hung up at 99%. the bios version to test memory only allowed the short version. some mentioned to go into safe mode, yet i do not even have access to the f8 menu. it just goes through the loading and keeps beeping until i let go of the key. some say to start a system recovery but when i try that, it actually loads with the regular windows logo screen but thats about it; it stays there without doing anything else. i really need help on this because i seriously don't know what else to do. i just got the laptop a couple months ago and to run into this really sucks.
View 14 Replies
View Related
Mar 9, 2012
I have a Sony Vaio VPCSC laptop that I have owned for about four months. In these four months, I have experienced boot issues once before that was resolved by a lucky guess on my part. I have had the blue screen of death about four times before as well. This problem occurred when I was installing a game on my laptop. I had just agreed to the EULA when I went to go turn off my bittorrent. Just then, my computer froze, giving the familiar white-transparent screen with the circular loading cursor. I waited for it to load, and when it didn't, I went off for about thirty minute to do other things to pass the time. When I came back and it was still frozen, I manually shut off the computer. When I booted up again, the Windows Error Recovery screen appeared, after which I selected Start Windows Normally. The Starting Windows animation ran and then afterwards my screen shut off for about three seconds, came back on with solely the black screen and the cursor. After a second the brightness dimmed. I am left with the black screen and the cursor, which occasionally will be the cursor accompanied by the circular loading cursor, much akin to this [URL] but with the Windows 7 cursor. The entire time, my hard drive indicator is lit. Last night I just left the black screen running, and when I woke up, it was the BSOD.
I restarted and then tried every boot option in the advanced boot options menu. The only one that brings me something besides the black screen is system recovery. In system recovery, Startup Repair runs its course and does nothing, System Restore does nothing because I have no restore points (I know, I know, my bad), System Image Recovery cannot find any system images, Windows Memory Diagnostic simply restarts the computer, and Command Prompt works, seeing as when I click it, it opens.
So, from my own assumptions, I think my hard drive is shot, which is frustrating since I have only had this laptop for four months. I've already had two prior laptops that had hard drive crashes within the first year. I have looked at the other threads about this, yet none of them have helped me, because I do not own a Windows 7 disc, or any disc of that sort.
View 3 Replies
View Related
Dec 23, 2011
I havn't booted up my computer in about 4 months. It was working fine before. Anyways the motherboard screen will come up and after that it will go to a black screen with a blinking cursor on the screen "most of the time" sometimes it's just a black screen. I can't boot into safe mode. I have made sure in the bios that the boot order is correct. I can't boot from CDrom. Is my harddrive bad and if my hard drive is bad shouldn't it still be able to boot from CDrom? that's what doesn't make sense to me.
View 9 Replies
View Related
Nov 22, 2012
i have install software yeshield from http://yesshield.com/ ...after i restart it....my laptop have black screen with cursor only after 'welcome' screen....how to fix it....,.i recently do restore point and this is not solved my problem.
View 2 Replies
View Related
Jul 18, 2012
I am getting the black screen with just the cursor. I have tried to boot up in safe mode and I still get nothing. I have tried to put in my windows 7 disk and do a repair and that does not work either.
View 5 Replies
View Related
Feb 28, 2011
I installed Windows 7 Service Pack 1 a few days ago, and it's been running since then without any problems. However, just yesterday I fell victim to the "Black Screen of Death". I was about to pop out for a few hours, so I exited the game I was playing to turn my machine off. Despite the game being in Windowed mode, where I could happily see the taskbar, once the program closed my entire screen went black. The cursor was present, but I couldn't do anything - not even Ctrl Alt Del.
I reset the computer with the reset switch on the tower, and it loaded back into Windows without issue. Everything looked OK, so I shut it down normally. When I came back a few hours later and turned on the machine, the real problems began. Everything boots fine, including the "Welcome" screen you get from W7 just before hitting the desktop. But instead of the desktop, I get a black screen and a mouse cursor.
Fortunately, safe mode still worked, so I went straight online to search for a solution. One of the articles I read blamed SP1, and said that uninstalling it had fixed the problem for them. So, in safe mode, I uninstalled SP1. SP1 uninstalled successfully, and my desktop returned! But once everything started loading, my Avast alerted me to a possible rootkit. I opted to delete the file, and was asked to perform a boot-time scan, which I agreed to.
I restarted the machine, and Avast's boot-time scan kicked in. It found nothing. Once the scan had finished, Windows restarted and the problem returned. Black screen, mouse cursor. This seems to be a common symptom of a variety of problems, so I have tried:
- The Prevx tool released in 2009 when this problem cropped up. No joy.
- Checking that Windows isn't looking for multiple monitor displays. It isn't.
- Uninstalling the video drivers, disabling the card, and using a different card with different drivers.
- HKLM regedit to ensure there wasn't a Localhost where there shouldn't be, and that explorer.exe was correctly listed. Everything was fine.
- I've run a Malware Bytes, Spybot, and Avast scan (full, thorough) all of which found nothing.
- I've simply sat and waiting at the black screen, for 15 - 20 minutes with no activity.
Ctrl Alt Del doesn't work, neither does Ctrl Shift Esc. The only thing I can do is reset the machine to prompt a "Windows didn't load properly" screen and go into safe mode. I have one last suspicion to try when I get home from work, and that's disabling / uninstalling the audio drivers. But if that fails, I'm out of ideas.
Windows 7 Professional 64-bit
Intel i7 920
6GB RAM
Radeon 5850 HD
View 1 Replies
View Related
Feb 19, 2012
Win7 (64 bit) will not boot into regular or safe mode, after log in I get a black screen w / cursor, and that is it. I believe the registry is corrupted. I attempted a repair with the win7 disk, that did not help.
View 4 Replies
View Related
May 14, 2012
I have a sony vaio vpceb11fm laptop. the moment i turn it on i get the vaio sign and then a black screen with a flashing cursor on the top left hand corner i tried f10 to recover the system but come across the same problem.
View 2 Replies
View Related
Oct 16, 2012
When I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. One major problem is that there are files that I really need for a school project on this computer. So, is there anything I can do to recover the files and fix my computer?
View 3 Replies
View Related
Jul 17, 2011
I get only black screen with mouse cursor. As mentioned in some blog I went the registry through ctrl+alt+Del key. went to winlogin and had not found on other key on shell excepting explorer.exe. Hence did not delete any keys.
View 1 Replies
View Related
Jul 5, 2011
I have a laptop that came into my shop last week, an HP G62 with Windows 7 Home Premium 64-bit. The user needed immediate file recovery which was done without a problem, and then I went to town on fixing the issue.The customer reported a "memory error" popping up before they shut the computer down. Upon restart, Windows would only load to a black screen with the mouse cursor. I've encountered this in the past and through various methods, such as CTRL+ALT+DEL or Startup Repair, but this one has eluded me for some time.No matter what I do, I can not get anything to launch on this computer. Windows from the hard drive, Windows from the install CD, built in Startup Repair, and Windows in every single startup mode all returns a black screen with the cursor. No shortcut keys seem to do anything.
I have also connected it to an external monitor to see if that was an issue, and it wasn't. I have tried UBCD to no avail, it just doesn't start. I have tried BartPE with a Window XP Pro install and received a blue screen.I have connected the hard drive as an external and run virus and malware scans with no issues found. I have tried to run CHKDSK, but the drive hangs about halfway through. The files, however, are all accessible and able to be moved/removed, but it does not allow me to change permissions. I have heard about this being a permission error, but I have had no luck in that department.The cd-rom drive works as I have just tried Paragon Partition Manager to use the boot corrector, however, it seems to be to no avail either.MemTest turned up no errors. Just to be sure I ran it with each memory stick going solo, same results.
View 5 Replies
View Related
Apr 23, 2012
So I've read through what seems like 100s of threads about the black screen with cursor. No task manager access, same problem in safe mode and even repair mode. I have not been able to fix this and I need it fixed desperately.
This is an Asus notebook running 7 Home, 64 bit. 2 days ago I reformatted and restored the pc using the discs I made. Everything went great. I took out the HD and plugged it directly into my desktop to transfer all my files back onto it. Got everything done except music. Put the HD back in the note book and used it for 2 days. Worked fine. Took the HD back out and plugged it into my desktop again. Transferred 25gb of music into the my music folder. Put the HD back in the notebook. It started up but wouldn't open iTunes. I thought maybe I should restart it. So I restarted it and it went crazy going through what seemed like every file on the machine. Invalid security id, deleting security id, replacing security id, and so on. I left it alone for a good hour or 2. Can back to the black screen with while cursor no matter what I do. I need this computer for work.
View 4 Replies
View Related
Oct 12, 2012
I'm trying to load a system recovery disk, however I'm getting a black screen with a cursor.
I've selected the CD/DVD to be first in the BIOS. I'm having to format my HD, because the laptop would load to a black screen with a cursor.
View 1 Replies
View Related
Oct 16, 2012
When I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. Also I was able to recover some files on the hard drive using a Ubuntu Live CD. I have an ASUS A53S laptop running Windows 7 Premium.
View 4 Replies
View Related
Oct 30, 2012
When I booted up my PC all I got was black screen with white cursor I tried pressing Alt Ctrl Delete but it didn't work I restarted the computer manually a few times and it got back to normal, this happened to me few times already, anything I should do to prevent such thing from happening?
View 1 Replies
View Related