I have a simple Dell Photo Printer 720 wich has worked fine with Windos XP. I now understand that there is no driver available to make this printer work with windows 7. Does anyone know how to work around this problem or do I have to junk my printer and chalk it up to "progress"
View 8 RepliesI recently built a new computer and everything i try to install besides video and motherboard drivers say they aren't compatible. I've never seen anything like this before. Whenever I try to install winrar, it says its not compatible and tells me to check whether my os is 32 or 64 bit, when it clearly says it is 64 in my "my computer" properties..
View 10 Replies View Relatedincompatible ink or log? How do I go on?
View 1 Replies View RelatedUpgrading to windows 7 has been both a blessing and a frustration. A good number of my programs are deemed not compatible and I have to go through a curious procedure every time I boot up one of these programs. Particularly, I use an ocr program, and a graphics program quite regularly. But every time I have to put up with the same process before I can run them. On the other hand, the manufacturers claim that their program is compatible with windows 7. Has anybody else been having this problem, or is it my ignorance that is at play here.
View 1 Replies View RelatedI have a new laptop running Win7 Home Premium. I also have another (older) laptop running the same. The problem is that although both are 64bit, the older one loaded and runs Office 2000 quite happily, but the newer one says it's incompatible!
1, Why does one comp run it and not the other?
2. How can I make it compatible?
I am upgrading my vista 32 install to Win 7. During the setup, the compatibilty report originally told me that Trend Micro Internet Security 2009 and Trend Micro Internet Security 2008 are preventing the upgrade.
I uninstalled Trend Micro 2009, as it's the only program I have on my computer and I've deleted all (I believe) references to it, yet the upgrade won't continue, because Trend Micro 2008 is preventing it.
Is there a reference somewhere that I could check?
I got a second hand computer with a mother board good enough to run windows 7. The sound card (do you still call it a sound card if it is on the motherboard?) gives out a very faint distorted sound. I thought this was a duff sound card so accepted it.Recently I got a window telling me the sound card wasn't set up properly, did I want it set up ? I pressed FIx and after a short while got a box up saying there was no driver for this card on windows 7.Is there any way I can get round this and perhaps use a driver for another version of windows?I have tried various helps including Microsoft and been told to click on the driver I have put on the desktop and do various things with it (or something like that, I can't find the window again) I havn't got a driver ?I can't afford another computer.I managed to download a piece of software advised elsewhere on this site and got the info that the sound card is realtek ac'97 for via(r) is this a type of sound card?
update II I managed to download and run a driver from an internet site (download cnet) for the realtek ac97 for windows 7 but it has made no difference. I have restarted the computer but the sound from the speakers is the same. Could it still be a software problem or do I have a hardware problem with the sound output?
my hard disk is 500Gb but 33.82Gb left 465Gb is hidden how to do ...secondary slave is bad back up and replace ...incompatible atapi ...
View 1 Replies View RelatedI have recently upgraded my laptop from XP to 7, only to find that my Linksys Instant wireless card is incompatible with this version of windows.I have tried to trouble shoot the problem using the instructions windows gave me, which included running the setup under windows xp compatibility, but the setup doesn't even run. An ethernet suffices for now but soon i'll be traveling and I'll need the wireless.
View 5 Replies View RelatedI've got a gateway model computer I want to upgrade, but I need a 400W power supply for the card I'm buying, should I be worried about a new power supply being incompatible for any reasons with my computer?
View 3 Replies View RelatedMy Dell Windows 7 now cannot print or add a new printer. When I try I receive a message" Windows can not add printer the local spooer service is not running. Please restart the spooler or restart the machine." Been on services and trying other things with out a printer.
View 14 Replies View RelatedPrinter not working. I tried additional dell drivers. OneNote print is activated but will not permit other documents to be instead.
View 1 Replies View RelatedHow can I get my dell AIO printer 924 to work with HP windows 8 computer?
View 1 Replies View RelatedI'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?
View 1 Replies View RelatedIs there a driver for Dell Photo AIO Printer 922 that works in Windows 7?
View 2 Replies View Relatedi cant load the drvers (dell printer all in one 962) on my windows 7 laptp. dells web site dont have them'
View 2 Replies View RelatedI am having a problem installing a dell 924 AIO printer on my ASUS running windows 7 64bit.
View 3 Replies View RelatedI have a brand new Windows 7 64bit build with a clean install from an Upgrade CD and noticed in BIOS that my 1st boot device must be "Windows Boot Manager" or it asks for the CD. I only have 1 storage device (SSD) in the system and when I look under Disk Management in windows, it shows a 100MB "EFI System Partition" in addition to the primary partition (which is labeled "Boot, Crash Dump, and Primary Partition" - so it seems to have the boot files on it).
My components are:
Intel i5 3570K
Gigabyte Z77-DS3H mainboard
16GB Crucial Ballistix
Intel 520 180GB SSD
LG BD optical drive
GTX 560ti
As I only have the one non-optical storage device I did not set any partition parameters at install. I Attempted to do a Startup Repair with the windows disc to maybe try and delete the EFI partition and got the "... System Recovery Options is incompatible with the version you are trying to repair" error. Not sure what that is. If Disk Management shows a healthy partition with "Boot" listed as being contained, why can I not select the SSD as boot device #1? I can boot perfectly fine with the Windows Boot Manager listed as boot device #1 and the SSD as #2, however it's not ideal.
I'm unable to find a driver on my new Dell windows 7 computer to run my Lexmark X1180 printer..
View 1 Replies View RelatedHow to use a dell 720 printer with windows 7 home
View 1 Replies View RelatedI have installed win 7 on my new HP desktop, now it does not accept my dell 950 printer.
View 3 Replies View Relatedwindows 7 will not recognise either of my printers no matter what I do.
I have reinstalled the drivers and clicked the XP service pack 2 in compatability as I was advised on one site but it does not work - I am very frustrated with the amount of things causing trouble with Windows 7!
Has anyone been able to get their Dell 922 printer to communicate with Windows 7? It appears that Dell will not write the drivers to make this communication possible. If there is a workaround, please provide the detailed steps.
View 1 Replies View RelatedI have recently downloaded Dell AIO 946 printer driver - successfully - but when I request Windows 7 pc to print a document it cannot as it can't find the printer port. Being new to this I need guidance as to how to ascertain which port is correct. Printer has USB cable connected and from port tab is using LPT1 port is this the correct one? Please help - I am totally confused????
View 5 Replies View RelatedI have done all that everyone everywhere seems to think would fix this issue.
My Dell 964 printer will not print after installing W 7 x64.
I tried compatibility mode to Vista service pack 2, tried unplugging, deleting and reinstalling drivers, it just will not take.
I am at a loss here and why can't this just be a simple fix??
Everything else seemed to adapt itself from the upgrade from V x64 to W7 x64.
Sure a few glitches, but all updated fine.
Any ideas??
After finally getting the internet to work on this little guy (needed to flip a switch is all) I now find myself completely unable to get the printer to work. looks like i'm not the only one.
I've tried everything - the dell forums are no-help-whatsoever (though this guy does appear to have gotten an older driver version to work)
is it possible I installed the drivers in the wrong order and screwed the pooch so to speak?
Could my logitech usb wireless mouse be creating a conflict?
No printer = me creating a vista partition
I need help getting my Dell Photo AIO printer 926 to work w/ Windows 7. I only plan on using it for a couple months until I get a new printer (once Windows 7 comes out that I know should work hassle free), but i DO need it now because school is starting and I don't want to have to convert all documents to word 2003 and then email them to my old computer...
All the drivers are installed, and it IS running in vista compatability mode. It just WONT print. When I try printing I usually don't get any errors. In word I do get an error though which says that the printer is not set up correctly. If I try to do a test page it just says cannot print. Windows 7 does not say anything is wrong.
Now I normally try printing from random websites, heres what happens. The first time that I send a document to print from a website it flashes in the document queue for about a second and then disappears. Afterwords if I try to send a document it won't even appear in the queue. From MS word I cannot even send the document... it won't work.
Now i DID get it to work once but that was after I had installed like 3 copies of the driver and the same printer was registered multiple times... I just couldn't have that. Oh and for some reason it had stopped the print spooler so I couldn't print anyways. So I went to removed all the drivers (and I think I removed all the copies, not sure how to really check...) and reinstalled the printer. Now the printer isn't working even though Windows 7 says it's ok...
Any ideas?
EDIT: oh, and any non-computer related functions work such as copying, whereas stuff like scanning/printing will not. So I figure it's something with the drivers =(
EDIT 2: working now... I reinstalled about another 3-4 times with different install settings each time, and I changed the service pack that it was in compatibility mode for; not sure which worked but atleast it's working now.
This happened before though before it turned off the print spooler, so I will mark as solved for now but It may break again. I'll update this again with info soon.
I have a Dell 2135cn MFP printer setup on my established network at home and all computers connect to it with no problems except 1
My win 7 64bit system will not connect to the printer when I try to add it, I get the error that states that the printer is not connected to the network. I can browse to the printer on 192.168.1.8 and see the print configure page so i know its visable through port 80.
I then installed windows xp pro on a vmware on my win 7 64 bit system and then installed the printer on the vm OS with no problems so I know the problem is with the win 7 64bit installation.
I have the latest drivers from dell and regardless of trying the setup the printer I cannot get the win7 64bit to see the printer during setup.
Dell 720 printer driver does not work on HP window 7 64 bits..
where can i find one that works?
I wish to install my printer a Dell photo A10 962 on my PC I upgraded to HP windows 7 and it will not accept the printer
View 1 Replies View RelatedI have a new Dell Inspirion 5110 running Windows 7 Home Premium 64 bit and want to install my old Pp Deskjet 710C.
View 3 Replies View Related