Computer Says Ati Catalyst Is Not Responding
Nov 24, 2011my computer says my ati catalyst is not responding what do i do
View 2 Repliesmy computer says my ati catalyst is not responding what do i do
View 2 Repliesabout 2-5 minutes after logging in (fully loaded, I'm assuming) the computer seems to stop responding. If there's a scan, it will freeze, whatever I choose to do, it will ignore it, but the computer isn't frozen completely since I can still access the start menu. Computer works fine in safe mode. (I'm in safe-mode right now)
[code]...
I am having a number of issues of this computer being slow, outlook not repsonding, once screensave goes on, then programs cannot re-open, have to use task manager to close and relaunch.
View 1 Replies View Relatedfor awhile I was constantly getting a message from windows saying my USB bandwidth was exceeded when I had my usb devices hooked up. So being the idiot I am I disabled the USB reserve or whatever that windows has in its USB devices section. Now when I plug any USB device in my computer windows doesnt notice it or do anythingIm not the most tech savy person ever, but does anyone know how to fix it?
View 3 Replies View Relatedcomputer doesnt respond when i insert a dvd or cd. is my driver is still working or not?
View 1 Replies View Relatedmy window7 OS does not work whenever i right click any of the files or folders. it stops working and displays "windows explorer is not responding".
View 1 Replies View RelatedMy laptop screen was broken by being steped on over a year ago. It worked through my tv though with HDMI connection. Out of no where it stopped projecting image to my tv even though when I unpluged or pluged in the cable it would make noise and the screen would flash. This was in august. So I stopped using it and let the battery completely die and sit there dead as this corrected other problems in the past (such as a nasty pop up virus. So I found and RGB-PC cable and have hooked it up to my TV that way.Well now that I can see the screen I have tried to use it and it is constantly freezing every program it uses and will last for a long time including task manager. It has rendered the computer un-usable. I have run a virus scan, disk clean and defrag and it still won't work. I also checked the event viewer and the system log wouldn't open. So I saved and cleared it as per advice on this site. Still the same.
NOTE: When HDMI crashed the computer was turned off using the power button a few times as I could not see anything. Also on one of the boot ups when this problem started to occur and instead of the regular safe mode screen option coming up the other screen came up (something about doing a scan and fixing it) and I guess it timed out or I hit no or something but windows just booted up and haven't been able to use the laptop properlky since. Not sure if its related but figured it was worth mentioning
My Asus computer will not allow me to access any Internet based programs once windows has loaded
Everything comes up as Not responding Cannot even get on the Internet to trya nd fix problem
MY dvd disc used to respond when I clicked on the d drive. Now all I get is windows is not responding?
View 2 Replies View RelatedMy Internet Explorer and Real Player programs stop responding on almost a daily basis.I'm wondering if these problems are hurting my computer because i just got it fixed and how to stop them from happening again.
View 1 Replies View RelatedThe remote computer isnt responding to connections on port 80 possibly due to firewall or security policy settings, or because it might be temporarily unavailable. Windows couldnt find any problems with the firewall on your computer.
View 2 Replies View RelatedI bought a new computer. This is the first time I have used Windows 7 OS. I am wondering if I am having issues connecting to the internet bc of Windows 7. Another computer in the house uses Vista and has no problems. My computer is constantly "not responding". What do I need to do? Should I download a different OS.
View 3 Replies View RelatedMy computer was working fine until I downloaded the windows service pack 1. First it was every now & then but soon my computer was freezing up ( not responding ) and it was impossible to even complete a document. This happens in all applications. I noticed with each new window update the worse my computer got. Still under warranty I spent hours on the phone with DELL twice, finally I did a fresh re-install of windows 7 professional. After the fresh install everything was fine. UNTIL I downloaded the windows updates, it started to 'not respond' again. I uninstalled the updates. The not responding issue is gone but I am concerned about windows security updates. Do I need them? I have contacted windows about this issue many times over the past several months with no response.
View 3 Replies View RelatedFor the past couple of days my computer has been freezing every time I open a new program or go to click on something. Using itunes is especially problematic because i will be listening to music and every thirty seconds the music will stop and continue, etc. I use Avast! free for protection and I have done every scan without them finding a virus, however they do get a couple of files they cannot scan and each time they are different files. I am not very tech savvy so I have no clue how to go about searching for the fix, however while searching through google i did find a lot of people had this problem with windows xp.
I own a Sony Vaio VPCEG32FX/W and have 142 GB used memory.
Programs i have installed are Photoshop CS5, Finale Notepad, Itunes, Last.fm, Firefox, Windows Live Messenger, The Sims 3, Avast!, Avidemux 2.5, Rollercoaster Tycoon, Winrar, and VLC mediaplayer
My Windows 7 Home Prem 64bit machine is only stable in Safe Mode.
If I boot normally, I can do anything for about 10 minutes and then the system stops responding. I can still move the mouse, click icons, things even highlight when I hover over them, but nothing happens. Pages say loading forever and never complete. If I try to open task manager, or Ctrl-Alt-Del, or double click anything, nothing happens. The only way to "recover" is to power off an power back on.
Chkdsk reports no problems. MS Security Essentials is up-to-date and has scanned w/o finding anything. Kaspersky rescue disc running in it's native linux found nothing. Combofix found nothing. Malwarebytes found nothing. SFC.exe /scannow doesn't find anything wrong either.
I can't get any sort of event viewer info because I don't think anything is failing that is being caught and registering there.
I'm at my whits' end here. I have a new HDD that I bought some time ago but have never installed. My last resort is to just do a clean install on that new drive and consider the old (current) drive faulty after 4 years. I don't want to do that though if I can just figure out what's causing the behavior and take care of it.
Apps were not responding and computer is hanging up... Now computer will now complete startup process (even in safe modes). Windows and norton antivirus suspect Oem-drv86.exe is a threat, but, neither offer a fix.
View 1 Replies View Related"Computer appears to be configured properly but the device or resource [URL] is not responding". It's not the DNS cause that's all properly set and I've double checked, restarted computer and did a virus scan with security essentials.. came up with nothing. I'm connected to the router, just not the internet and when I go into my router and disable firewall it gets rid of the yellow triangle caution symbol and says internet access.. but I can't do anything..
View 6 Replies View RelatedI have a Toshiba Satellite C650-17Z laptop running Windows 7 Ultimate 64-bit. I came across a problem today with the computer taking 2-3 minutes on the "Starting Windows" boot screen alone, but since it has finally gotten past that process applications are taking absolutely ages to load up, and stop responding when they finally do load up.
I attempted a Startup Repair and Memory Diagnostic - the Memory Diagnostic came out fine, but the Startup Repair explained that this could be a problem with a recently installed driver.
I recently uninstalled some MSXML and SQL Server bits and bobs which I thought were unnecessary
your computer appears to be correctly cofigured but the device or resource (DNSserver)is not responding
View 2 Replies View Relatedyour computer appears to be correctly configured but the device or resource (www.facebook.com) is not responding.. this is the message I keep getting.. I can connect to facebook on my kindle but my laptop just wont do it.. I can connect to any other site on my laptop just not facebook..
View 1 Replies View RelatedI click ie and cant open it. when I do a diagnostic it says "computer appears to be correctly configured but the device or resource (web proxy) is not responding.
View 1 Replies View RelatedI click update now, and install. When i look back at the update pannel it says i have 12.3. After the download it says "warnings occured during installation."
I've uninstalled it, ran a sweeper to "clean and anaylze" Amd-Vision(in safe mode).
ATI has released its Catalyst v9.10 drivers.
Download Link:-
http://game.amd.com/us-en/drivers_catalyst.aspx
the following section provides a summary of open issues that may be experienced under the windows 7 operating system in the latest version of catalyst™. these include:on some configurations ubisoft wheelman may stop responding during gameplay catalyst control center: enabling lcd overdrive may cause magnification of the mouse cursor when moved overtop of the calibration preview adobe flash player 10.1 pre‐release: dropped frames and browser lag may be noticed when playing multiple instances of Internet clips with hardware acceleration enabled a perfromance drop does occur durring resident evil 5 cinematics no sound output on hdmi.
when playing back some blu‐ray content in power dvd 9 catalyst control center: newly added custom modes may fail to be displayed in desktop tree view loss of hdmi signal may occus on some hdmi tvs, on rescan of the hdmi signal it may apear in the wrong screen location. cyberling power dvd 9: dts truehd option may not be visible in the hdmi tab on some systems. city of heros: with certain graphics adapters some screen flashing might be observed during game play.
My graphics drivers appear to be stuck on this version - every time I try to update, it goes through the whole process and looks like it exits successfully, but every time a new update is released it says my version is 12.4. <_<
View 4 Replies View RelatedI keeping getting this message: Catalyst Control Center: Host stopped working. The tech that is assisting me, provided me with a link to Drivesweeper, however, the site says that the drivesweeper has been discontinued. I need another link for a "driversweeper" or the like
View 5 Replies View RelatedATI Catalyst Windows 7 preview driver package - includes the Windows 7 driver, and the ATI Catalyst Control Center (with limited feature support). AMD Customer Care
I'd get mine, but, I don't have Windows Seven public beta - where is it.. (Remember they may upgrade drivers before 7 beta officially released.)
Note: This driver is provided as is and is not supported by AMD. It has not completed full AMD testing.
PS. I left the tags out because of errors - '7' too short must be 3 char. and 'seven' is too common a word! So, no 7 seven windows tags for you ...
I installed CCC recently. When I restarted my computer it started becoming unresponsive and locked up alot.
View 9 Replies View Relatedi just installed win 7 rtm. i only installed avira and then tried to install catalyst, but i get bsod during installation.
i have an ati 3300 (integrated) + 3400.
any idea?
Im running a 6870 with windows 7 64-bit for the most part i have had no problems with catalyst or the card, apart from a random occurence where the screen rolls over, so the left side goes into the right and it just moves to the left so it still covers the screen, HOWEVER thats not my current issue, i recently used 'Driver sweeper' to clear all AMD drivers and do a fresh install of the frivers/catalyst to see if i could stop the occasional "this driver has stoped responding but has been seccesfully recovered" rerroes, or this screen spiltting issue, because i presumed it was a software issue, and then i re-installed with the 11.12 version, which at teh end came up with a message that there were erros and to read the log, which i did and thety all said sucess with nothing down the bottom saying anything about an error, but it all still worked althoguh i still had hte not responding error however i recently installed the 12.2 preview drivers, 9aswell as the 12.1 drivers), both of these version after i install them catalyst wont open, on both right clicking the desktop and running ccc.exe after i installed it i havnt had any not responding or BSOD errors, however i cant acces catalyst, and on some occasions when i installed hte 11.12 drivers random things like not being able to acces catalyst via right-clicking the desktop happened, i have had a look at many posts about it not worknig or opening up ,but they all come back with a fixx where they just removed and installed it fresh, well i have triyed the amd uninstalled aswell as driver sweeper, both to no avail, and i have hte lates .net framwork to support catalyst, i just dont understand why it wont work and now when im trying to acces catalyst explorer comes up with the not responding error, and i can see catalyst in the task manager pop up for a second but then it goes away, i will check msconfig and services to make sure its all working but i cant think of any reason why it wont work at all.
View 1 Replies View RelatedI just upgraded my AMD catalyst software to 12.4 on my HTPC. Been noticing that when I am viewing via my Sharp 19"LED TV I get signal cut out after about 20 minutes. I notice this when my screen save comes on in WMC. It eventually craps out and I get "no signal" messages on my screen. It comes back if I simply click on the mouse.This never used to happen before. I could leave the HTPC on over night and simply turn the TV monitor off. When I would turn the monitor on in the morning, the Desktop would be visible.Are there new settings in 12.4 that could be causing signal cut out (i.e. like an energy saver option)?
View 4 Replies View Related