i use window 7 home premium Gateway laptop NV52. yesterday, i opened file location on an icon on destop and on that interface, i tampered with the "open with" and my entire applications and files on windows changed. any of the "open with" options like window media, paint, picture viewer, adobe etc entirely changes my applications and files. even window files were affected. if i try opening a file, it will show me adobe reader or any few mentioned above cannot open this file. i tried using system restore and program access default on control panel but to no avail. so folders on my control panel attempts opening with any of the choosen file above. my exe. files cant open.
I cannot open many applications in Windows 7 including Firefox, MS Word, and Excel. Some that do open will freeze during use. I suspect that a virus or malware could be causing these problems. The applications open in Windows Safe Mode okay. Here's the Hijackthis and DDS log:
Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 11:38:51 AM, on 08/01/11 Platform: Windows 7 SP1 (WinNT 6.00.3505) MSIE: Internet Explorer v9.00 (9.00.8112.16421) Boot mode: Safe mode with network support
It seems all my applications are acting up so I have to use a separate computer. I know its not a virus since I never accessed the internet but all my applications went hay-wire, if I double click for example: notepad, it tries to open up internet explorer then shuts that down and asks me to run or save the file application, either choice I make causes the screen requesting those two options to reappear over and over. It all started when I made my falloutnewvegas.exe try to open with the falloutnewvegaslauncher which was the only one allowing the game to launch. so after that every application has a internet explorer icon in the middle of it with a blank page.
I prefer to have my browser button on the far left of the taskbar. This is why I have the browser pinned here and I use grouping. Now I was wondering if it was possible to NOT have it pinned here but still have the button in the same place if I open it.
Like for example, nothing pinned in the taskbar and I have explorer/taskmanager opened and I open my browser and have the button automatically placed at the far left instead of the 3d position in this example.
Testing a windows 7 setup and have problems with the default save as/ open location not defaulting to the users home area. It goes to the desktop insteadI have done thefollowinn group policy go to User Configuration AdministrativeTemplatesWindowsComponentsWindows ExplorerCommon Open File DialogClck ontems displayed in Places Bardd your Save Location. for example \myserverusers est\%USERNAME%i have put the setting in number 1 and i does not work, i have put it in all 5 and still does not work, i have tried just
I have Googled this without success. Does anyone know of a script (or is able to write one?) which will batch convert a folder (+ subfolders) full of shortcuts so that they all open the application they link to (in the case, Microsoft Flight Simulator) in a maximized, not 'normal' window?
I have over a thousand of these shortcuts and opening each one's properties window and changing 'normal' to 'maximized' is not really an option!
Not really a 'Windows 7' question specifically of course, but maybe someone here will know anyway?
I am having the weirdest problem with my computer. randomly my mouse will just stop opening programs/applications, i cannot click on anything in the taskbar etc. I have also tried a different mouse... & reformatted my computer back to the bare basics, reinstalled all the drivers to no avail. one minute i am playing BF3 fine or doing something else and down it goes... the only thing i can then do is reboot my system and go again.
computer, as I am not familiar with Windows 7. When he attempts to open an application (any application) it opens an "Open With" window with only IE 8 and Word Pad as the only recommended programs.He's figured a PITA work around by right clicking the application icon and selecting "Run as Administrator" and then it opens after clicking through the security window. My initial thought was that his account was somehow changed from an Administrator account to a standard account, but that proved incorrect.I'm thinking it's some virus or malware that's causing this, but I see no other apparent signs of infection (i.e. degradation in performance) and he is protected by a current Antivirus (Eset), so I'm also thinking there may be some corruption of his system files, but like I said, I'm a novice where Windows 7 is concerned.
My Win7 won't let me run certain applications or .exe files, mainly games. Some it does and some it doesn't for no apparent reason. I've got 3 HDDs (2 int, 1 ext) and I've tried running it from all three and still nothing. The same thing happens everytime, I try to run it, the loading icon appears and then nothing. No error message and no apparent cause. My hardware can take it, I've got the correct DX and nothing.I've tried running it as an admin to no avail and I've tried running it in safe mode. When this happened the application loaded but said I needed to get DX 9.0 (Which I have) and enable hardware acceleration (which it is).
My wife has Windows 7 home premium x64 on her laptop and is using Word 2007. The problem she is having is she will open a word file, change it up, save it, then re-open it later and its the old file not the new one. Where as I can open the edited file on my desktop running the same OS but with Word 2010 and the file that opens for me is the newest version.
Im having a problem with opening files I use to open with two programs. One is mkv, vob and divx files with homecinema. And snes roms with an emulator. Basically win 7 would let me select the program and it would show up on the list of programs to use. I would select always use and I'm done. But I moved the folders containing the files to a different folder and now my two programs I use will not show up in the open with list. I now have to go to the program itself and search for the files. Its a pain because I could click on the files and get right to them.
for an online course in adobe photoshop i am doing,i had to download the course files which consisted of a heap of files with .jpeg which i have no trouble opening and viewing,and other files with .pds where i ijust get an error message saying unable to open these files
im having quite similar problem in restoring windows. my pc have been attacked by virus which all my files been transfer to .exe file. i cannot open any files. i wanted to restore my windows however the cd was missing. can i install or restore windows without cd or how could i use my windows using the product key attached at the casing of my pc.
when a file comes up to open and I click on it , it goes to Microsoft office , then a screen comes up saying put in your key . I have no clue as to what is happening here. I cant open files or PDF's.
Any time I try to open an .exe file, or a shortcut to an .exe file, I get an error message saying that Windows cannot find the file.I've tried moving files to different locations, but nothing works. When I restart in Safe Mode everything opens fine, so I'm worried it's some kind of virus or malware causing the problem.
I recently was perusing some unsavory websites (I'm sure you can guess) today and all of a sudden I got these messages which I started to ignore. Then it said that my flash player could not be run, or something like that. The main thing was that something has hijacked my computer, preventing me from running ANY exe file, including my Trend Micro Maximum Security; HijackThis; System Restore; etc. I called Trend Micro and they could not help me either. I think I had glimpsed something that looked like it said "worm32" which leads me to believe that it is a worm that is infecting my computer. I keep getting the same message whenever I open any exe file: "This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the default programs panel." I went into the default programs panel and found about 108 extensions that the current default is "unknown application". Some of these extensions include .386, .asp, .bat, .chk, and .cmd to name a few.
I'm really at my wit's end with this current issue I'm having. I recently got some spyware "pw.exe" which posed as "Win 7 Internet Security". I do not recall what I did to get rid of this issue, but the rogue anti-virus software is no longer posting imaginary warning messages. Avast shows no threats + Malwarebytes removed all the remaining threats.As a workaround, I created a 2nd Administrator account and was able to connect and open up Firefox to browse for some fixes. This was before Malwarebytes removed the threats (LOG AT END OF POST)I previously used to not be able to open any .exe files on the 1st admin account due to some permission issue related to the spyware. After the spyware/trojan removal - I have messed up .exe file associations and cannot access "regedit.exe" either through "run" or "cmd". I keep getting a "Cannot find C:Windowsegedit.exe" despite the file still being there. The only way to get cmd is through task manager by CTRL + clicking "Open new Process". Only problem is, I don't where to go from there.[CODE]
Here is a rundown of what happened. I was on the computer, not doing anything online and suddenly the computer shuts down and restarts. Upon restarting, windows (I'm running Windows 64 bit Home Premium) appears to not be able to open. It promptly displayed a new loading bar with "Loading Windows Files" or something like that. I attempted to reboot in safe mode, lastest working config, etc but nothing worked. I ran hardware checks including memory checks and nothing appeared to be wrong. When trying to run the repair utility, there was a startuprepairoffline error and the issue could not be fixed. I attempted a system restore but it said the restore failed. However, upon restarting my computer, it loaded to Windows and said restore was successful. Now that I somehow have Windows up, I am unable to use any programs of any kind besides cmd, regedit, etc. I have attempted to download the exe_fix_w7 file however it will not merge with the existing registry as it says that some are in use. I have tried both in safe mode as well as normal but to no use. I attempted to manually edit the lines which seems possible however I'm unsure if I did it correctly. So basically I'm stuck at not being able to open any files at the moment. I'm still not entirely sure there isn't something wrong with the hardware as on start up the computer now makes a sound on the Dell splash screen as if something is shutting down internally, however the BIOS diagnostic had everything passing so it may be nothing.
have been setting up all the *.wma files on my music web site to stream as directed by *.wax files. everything was fine in XP Pro...but now I've gone over to Windows 7; & noticed that when I click on one of the *.wma's at my site...it doesn't stream...Windows 7 instead asks me if I want to open or save the file. no matter which option I choose...it treats it as a text file (opening the *.wax in 'Notepad').
I have just downloaded files for sewing patterns BUT they cannot be opened because they are not JPegs. They have extension names like ART CST DST EXP HUS JEF PES SHV VIP and XXX.What can I do? Do I need to buy expensive software for each of these file types. I found something that said it would open them and charge only 29 American dollars but when I went to pay it wanted over 50 Euros which is MUCH MUCH mor
It seems to me that I cant seem to open 7z files. When ever I try it gives me a error saying "The archive is either in unknown format or damaged" This is every 7z file
Can't access exe files. "This file does not have a program associated with it fr performing this action. Please installa program or, if one is already installed, create an association in the Default Programs control panel." I found "fixes" online, but nothing helped. I can't acess regedit files, ths has dropped my acess to "open as admin" as well. The latest fix didnt work either. I changed the files to Adobe, to try to gain acess. Still a no go. I've tried in safe mode as well. IndyWolf has chosen the best answer to his/her question.Click here to view the answer that was selected.
I cannot open my PDF files on Adobe Reader because I receive a message telling me that BIB.dll is missing and needs to be installed. Been probing with no direction.