Assigning A Different User?
Feb 28, 2011
I have a Acer Aspire One that crashed and blew smoke out the power plug hole a few weeks ago. I had Windows 7 installed on it. Sent it to the factory. They replaced the motherboard, keyboard, LCD cable and HARD DRIVE........ S'ok didn't loose any data. Knew I'd just re-install all of the programs I had before. When I turned it on, found that they had installed VISTA with an "User owner" of ACER. After reading found out that it was better to upgrade to Windows 7 than do a clean install, so that's what I did. Works good, except it still has an "user owner" (don't know what else to call it) of ACER. I'm the administrator, but when I install some software it says it's registered to ACER. Is there someway to change that over to me or do I have to do a clean install?
View 4 Replies
ADVERTISEMENT
Dec 17, 2009
I'd like to assign a few select "domain users" to be local admin over their test machines which log into a domain. The test machines are Windows 7 64bit and the domain is Win2k8 R2.
View 8 Replies
View Related
Dec 28, 2011
I do not use virtual xp at all so I am kinda lost here. I have a customer that wants to run his IP based printer from this VM using a software that is not Windows 7 supported. The software loaded perfectly. I just need to get a NIC to work so I can ping the printer at a static IP. I see a (Generic) Intel NIC in the Network Connections window on the VM, I can even ping the card when I set it up as static. But I cannot ping the IP printer from the VM. They are connected with a crossover cable and all works perfectly from 7 (i.e. pinging the printer) but on the VM I get timeouts. There are 2 NIC's on the physical 7 OS and both are functioning perfectly. Why do I not see a physical card on the VM? What do I have to do to get one of the two cards to talk to my IP printer from the VM?
View 1 Replies
View Related
Aug 5, 2012
i have a WD Mybooklive and i have assigned a static ip address and net mask to it. After doing this i cannot access it on my computer which has a DHCP ip address.
i can however access it's web page by typing it's ip address into a browser i cannot access it by typing \mybooklive{share name} after assigning a static ip
here's my current set up -
NAS and computer both connected to router via ethernet cables
View 1 Replies
View Related
Aug 3, 2009
I wonder, can I assign some of the RAM to the graphics card, so the graphics card will think its its own memory, and will use that along its own memory.
I am asking because I need like 70 MB more memory on the graphics card for GTA IV, so the textures will stop disappearing. I know this would most likely cause slowdown, but I wonder if its possible.
View 9 Replies
View Related
Aug 1, 2012
My desktop computers OS is Windows 7 Home Premium 64 bit with 4gig of RAMinstalledI recently installed VMware Player and then installed Windows XP Professional 32 bit.When I installed XP I assigned 1 gig of RAM. If Im not mistaken, when I shutdown my virtual machine it will release the RAM that I assigned to it so that when Im back on my host machine it still has the 4 gig of RAM.
View 4 Replies
View Related
Jun 24, 2012
the letter m has gone on my my keyboard.. How do I assign m to a different key combination, such as alt+N? Using word 2007 on windows 7.
View 1 Replies
View Related
Jul 1, 2012
I have a strange networking situation. Let me start by saying this situation is on a Domain, and that I am using Windows 2011 SBS and Windows 7 clients.My server has a DHCP range of 192.x.x.150 to 192.x.x.199 - and all other I.P. addresses are static.On a workstation located at I.P. 192.x.x.13 I am seeing an address conflict.When I perform an "nbtstat -a 192.x.x.13" command from the server I am given the logical computer name of a staff members personal laptop.Investigation of the laptop reveals that it is set to DHCP, and clearly the address of 192.x.x.13 is outside of my servers DHCP scope, so this I.P. should never be assigned, let alone in duplicate.I Googled this topic before posting, and it was suggested that IPv6 could be having an adverse affect. I determined this because I performed a ping on the laptop and only got a MAC address back rather than an I.P. address.
View 1 Replies
View Related
Dec 7, 2010
I kind of miss the XP OS setup where it makes you assign the admin password during setup. Am I missing the place to do that in a Windows 7 setup or is it just done after the install?
View 3 Replies
View Related
Jul 6, 2012
On an Asus p8z77-v mobo I can set each individual sata port as removeable or not. I am in AHCI mode. My rig has a dock for an ssd drive that I will use as a backup image. when I initialize the ssd It asks "If" I would like to assign a path and drive letter. If I assign X or Z is win 7 gonna have hissy fits if that drive is not present at boot or if I put a different ssd in that dock ?
View 3 Replies
View Related
Jul 20, 2010
my Windows 7 recently quit assigning drive letters automatically. I frequently plug in new hard drives to the system using various USB to IDE or SATA adapters and now when I plug in a new hard drive with any of these USB adapters, it does not get a drive letter assigned to the volumes on the drive. If I go to Disk Management, the drives show up, and so do their partitions, and I can manually assign a drive letter to it, but this gets rather tedious. Any idea why it quit doing it automatically and how to get it to automatically assign drive letters once again?? I figured maybe it ran out of letters, so I went in the registry to HKEY_LOCAL_MACHINESYSTEMMountedDevices and deleted all the remembered drive letter assignments in there, but that didn't help any.
View 7 Replies
View Related
Jul 17, 2012
I'm looking for really good network tools software, that can completely manage my LAN - monitor network activity on all PC's on the LAN (upload/download activity), port scanning, wireless management, assigning IP addresses and just all the general network tasks.
View 3 Replies
View Related
Aug 14, 2011
I use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
View 1 Replies
View Related
Jan 17, 2012
So a new box recently built, when booted, defaults to the local administrator account.This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift. So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?
View 1 Replies
View Related
Jan 17, 2013
Earlier today I turned on my Toshiba laptop (Satellite P855-S5200) and got some sort of error screen, and then it brought me to a screen asking if I wanted to do a system repair or start windows normally. I chose system repair, but then it seemed to get stuck in that process (It was taking forever and nothing was happening), so I turned off the laptop (I know, big no no), booted in safe mode, and did a system restore to a restore point from about a week ago. The "starting Windows" screen came and went, no problem. Everything seemed fine till I got to the User Selection screen (the default blue one with the little hummingbird or whatever). Then it just sat there on that screen. I could see the hummingbird and the little squiggly lines, but there were no buttons to click my user. I just let it sit there, and after about 5 minutes, the user names popped up, and I was able to continue using the computer without any problems, no other speed issues whatsoever. It now makes me wait every time, always about 5 minutes, before the user names pop up. It does this when I restart the machine and when I try to switch users.
It is a Pentium Core i7
2.3 Ghz
8 GB RAM
Windows 7 Home Premium 64 bit
View 1 Replies
View Related
Apr 22, 2011
I changed the values in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList in order to move the default user locations to my second partition. I then created a new user profile but when I try to login I get the message 'The User Profile Service failed the login'. When I set these values back to normal, new accounts work fine but I really want my user accounts on the second partition.
View 1 Replies
View Related
Oct 31, 2012
I changed a user from admin to standard after creating a new admin account. When I boot into the standard user, I am prompted by UAC for the admin password for 4 programs to start. All the programs are ASUS utilities that came with mymotherboard.I have checked the permissions of the programs and the User group has full control.Also, these programs do not show up in the MSCONFIG startup tab. I want the utilities to run but do not want to have to authenticate every time I boot
View 10 Replies
View Related
Feb 17, 2012
I am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts and there are SID keys for each of these users in the registry.
Now when we create a new user, the account is created without any problems. The user shows up on the logon page and after running the net user command, it shows up there as well. When I try to logon with the new user, I get a message: The User Profile Service failed the logon. User profile cannot be loaded.
None of the new user accounts show up in the registry. The other anomaly that I see is that the Default User folder is missing in each of the Users subdirectory for the three accounts where I have no problems.
I have read the Microsoft Knowledge Base Article 947215 and none of the methods apply to my problem. I also checked Local Group Policies and the Do not logon users with temporary profiles setting is not configured.
View 4 Replies
View Related
Jan 2, 2011
How do I map existing User Folders to a newly created User Account?I had existing User Folders on drive D. I added a new drive C and installed the OS on C but changed default location of User Folders to D. Now my existing User Folders are in the Users folder on D but there is no User Account associated with them. If I create a user account with the same name will it map to the existing folder within Users?I did a test of this. I created a folder called Test within Users then created a User account called Test and logged in. It created another folder within Users called Test.Computername.
View 2 Replies
View Related
Jan 2, 2012
From my husband's Admin account, I deleted my own User Account, but the account is still there (with a lock icon on it) and I am unable to delete it (gives me the message that the folder is open or in use by another program). I changed the owner to my husband (checked the box "Replace owner on subcontainers and objects") as suggested on this thread and I still can't delete it.istory:- My user profile was corrupted, got the message that a temporary user profile was created.- Rather than going the route of going into the registry as suggested here, I deleted the account but kept the files (was this my mistake)?- When I went to create a new account, it appended HOME.DESKTOP to the end of my name
View 5 Replies
View Related
Apr 3, 2012
Windows XP Remote Desktop Behaviour is desireable. that is, when one account is logged in, if another account is tried to use to log in remotely from another computer, then the 2nd user cannot connect and it is indicated who is currently logged in.
Windows 7 Default behaviour is to allow the second user to try to disconnect the first user through a query message which has an idle timer.
Is there any way to change the behaviour back to windows xp, where 1) disconnection of the 1st user session is not possible, and 2) it is indicated which user is signed on?
View 9 Replies
View Related
Mar 30, 2010
With the power user group gone in Windows 7, has the standard User now gotten the permissions that the Power User had?
View 5 Replies
View Related
Jul 26, 2011
I have had my clean install of windows for about a fortnight now. I just recently found that the account I actually want to use though is the hidden "ultimate administrator"kind of user. Is there a quick easy way to migrate my settings and user data from the normal administrator user "tom" to the super administrator user?
View 9 Replies
View Related
Jan 24, 2012
My father replaced his Windows 98 machine with a new computer running Windows 7.He's currently on 32-bit ultimate, but we could change versions if needed.He's really hoping there's some way to force Windows 7 into a single user mode, primarily so C:usersAll Users, Default User, Public, and his own user are merged into one. It's absolutely driving him nuts the way it is.
View 2 Replies
View Related
Feb 18, 2012
A twist on the creation of user folders on a drive other than C: in Win 7 Ultimate. Does anyone know if one could designate a user folder location such as E:Data instead of using the users name and being a subdirectory of "Users". I am the ONLY one on my computer - and it would seem much easier to look to the top folder in the E drive than clicking thru E:, users, name, documents, project. I fully realize that I can set up shortcuts, but when you are in an application that wants to place a file somewhere else and presents you with an explorer windows it is a pain. The only method I thought of is using redirection with symbolic links.
View 1 Replies
View Related
Dec 29, 2012
i start my pc up (from being off) and get logged into a temp user profile. It tells me that i cannot acess my user profile and all information will be deleted on logging out. I've looked online for a soloution but none work for me ,I really dont know how to resolve this problem,I have limited knowledge and computer skills. i really dont want to scrap this drive and start over.
View 15 Replies
View Related
Jul 5, 2012
What is the easiest way to move multiple user files on a pc to a new user file on the same pc? Windows 7 home premium.
View 12 Replies
View Related
Nov 17, 2012
when i try to create a new user profile ~ with or without a password, it shows up on the main login page, but when i click on it to open, the message "UserProfileService_service failed the logon_user profile cannot be loaded". i have searched microsoft support with little solutions listed. and the ones that are listed seem too technical for me to be trying on my own. there are many posts there with this problem, but they all seem to be several years old.
i am using windows 7. i have never been able to create any accounts other than my administrator account & the one account i use for all my general computer use. i have been using norton 360 with no problems. i have resorted to just using any "log in/log out' links on all the sites my husband wants to use.i am really not all that confident doing anything super technical to fix this, since i don't have a real understanding of different extensions or types of files. i am afraid i could really mess everything up really bad. but, it would just be SO MUCH EASIER & FASTER if i had my account & my husband had his own account.
View 10 Replies
View Related
Jul 13, 2011
My wife's Dell desktop (after a nighttime thunderstorm) will not permit her to log on. When she enters the password she gets the following message: "The User Profile Service service failed the logon. User profile cannot be loaded". Has anyone encountered this issue and is there a user fix, or should we take the computer back to where it was bought for service?
View 5 Replies
View Related
Dec 2, 2009
How to Run a Program as a Different User in Windows 7 ?
View 0 Replies
View Related
Dec 12, 2010
My New Laptop doesn't have two users only one..and that user is me.. I don't have administrative rights so therefore I can't create an administrator..to do simple tasks such as delete a program,, or open up msconfig.. These functions need administrative rights. How do I get these?
View 9 Replies
View Related
