For last couple of days I can't use iternet without being connected with a cable.It seems like the wireless connection button is switched off but have no idea where it is to switch it back on
View 2 RepliesIn XP, if one is playing something over the network on a wireless connection, there are usually (always?) little dropouts every so often caused by Wireless Zero Configuration service. So once its connected, simply disabling the service causes those dropouts to go away and playback is smooth and steady.Well, in Windows 7 I have those same dropouts over wireless but, no Wireless Zero Configuration service to disable. So what is the equivalent or what needs to be done to make it quite checking the connection so that playback will be as smooth as it is with XP?I've tried disabling a couple of sevices that were associated to wireless (WLAN Autoconfig) but so far I've only managed to completely bonk the connection.
View 4 Replies View RelatedI was wondering if there are anything like the Wireless Zero configuration on windows 7. The thing that scans for wireless networks constantly.
View 4 Replies View RelatedI can't even connect to my router with windows 7 now, but my ipod works fine. Is there a BETTER alternative to the built in windows connection manager? I'm on windows 7 ultimate 64 bit
View 3 Replies View RelatedI installed Registry Booster on my mom's laptop. I used a video to slightly hack the registry to get it for free (don't interrogate me, she needed a cleanup badly). If it helps, here's the video I used: < piracy advice removed> Now everytime her computer boots up, a pop-up comes up saying that the wireless configuration notification.dll has not been registered about two minutes after it boots up completely.it is a Dell Inspiron 1764 with Windows 7 Home Premium 64-bit.
View 1 Replies View RelatedI can't get wireless for some reason and get the msg: "Wireless doesn't have a valid IP configuration", with "unidentified network, no network access". In the past, I could just plug in to the wired connection and theIn suddenly, it would recognize the wireless. I can't seem to get it to work after reboot, turning off the router, etc. I've looked through other posts and tried various things and I don't have bonjour anywhere either that i can tell. [code]
View 5 Replies View RelatedI've had this problem since I bought a new desktop PC with windows 7 installed. Every once in a while my internet stops working (router+modem) and a yellow exclamation mark appears. When I use the windows solution utility I get two different messages:
a)either my wireless network connection does not have a valid IP
b) the default gateway is not available
I am using d-link dwa-127 wireless adapter since my computer does not have an integrated wifi card, and I have already removed norton, which could possibly be blocking my conncection. I have tried setting my IP manually, but it does not work.
At the beginning it all functioned normally, and even now it works, but it did not before. I also noticed that when it does not work it says 'Unidentified network', and when it does it says 'Smuc' (the ssid of our network). The internet as such is working this whole time, I always check it on my laptop with windows XP and an integrated WiFi card.
The computer which has the problem is an Acer Aspire X3400, 64-bit operating system. I get the unidentified network no internet access thing come up when i click on the little symbol at the bottom which has the yellow warning triangle infront of it. I have tried disabling the connection and restoring it. Releasing the ip and renewing it. I have tried to update the driver (ethernet cable) but it says it is up to date. In the driver management there is a yellow triangle next to the USB network interface.
View 1 Replies View Relatedi have an HP touchsmart computer running windows 7 home premium 64bit and im in the army living in the barracks so my only internet source is a hotspot that they have set up for us in the barracks my problem is that when i try to connect to it it says "Wireless Network Connection dosnt have a valid ip configuration".i have went through the cmd and did the ipconfig/all, ipconfig/release, ipconfig/renew with no luck iv reinstalled my drivers for my wireless card this is what i got with my ipconfig/all. [code]
View 5 Replies View RelatedIs what i get when i run the internet trouble shooter. I try to find a wireless network on my laptop and i connect to one but it sometimes it says (when i go to network sharing place) that it is an unidentified network. i try connecting to others but i don't know the security key.
View 4 Replies View RelatedI've been through mostly all topics and ways to make my internet work in your forums but I still can't find a solution. I installed windows 7 on my laptop and when I try to connect to the internet wireless, all I get is this message: wireless network connection doesn't have a valid ip configuration[CODE]
View 1 Replies View Relatedi im trying to connect two laptops but i get this (Wireless Network Connection Doesn't Have Valid IP Configuration) on the other laptop, and the yellow triangle shows on both laptops but i have access.
Heres the ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMohenned M. Kadir>ipconfig /all
[Code].....
I need to configure my Wireless Router N150 2-Port NETGEAR. It does not come with a CD and the installation guide has not been successful so far.
View 1 Replies View RelatedMy computer crashed and i have no internet for one of my three computers it says Wireless Network Connection doesn't have Valid IP Configuration?
View 1 Replies View RelatedI'm running Windows 7 professional on an HP 4320s probook. I recently uninstalled some of the HP programs because I never used them (sorry can't remember which) and now I cant connect to the internet. I get the error message in the thread's title.I've tried ipconfig/release and the fix that has netsh ip textlog in it and i've also disabled the IP helper. None of these have worked. I looked for webroot in services.msc but couldnt find it so i don't think that's the problem either.
View 5 Replies View RelatedI frequently bring my laptop to work where the is a public wireless signal. I work at a hospital. There is a secure network but I don't have the password for it, so I use the public one. Up until recently I used an old asus with vista, and while the signal was pretty low I had no problem connecting to it and staying connected. Just meant slow internet for me. However, that computer has sadly died and I bought a samsung NP700Z5B-S01UB. And while it's a very nice machine, I cant seem to connect to the network here. It shows that there is a low wireless signal, but it still wont let me connect. The error it gives me is "wireless network connection" doesn't have a valid IP configuration. since I cannot do anything to the wireless network at all (as it is a network associated with the hospital).
View 4 Replies View RelatedI get a triangle and exclamation point on the wireless signal icon in my task bar after about an hour after being connected to the internet. When I hover over the icon it displays "Limited Access". Connection is lost at this point.I then right click the icon and click "Troubleshoot Network Problems" and windows seems to restart the network card and I regain internet access for another hour or so. It says the error was "Wireless network connection doesn't have a valid IP configuration". This is hard for me to troubleshoot because everyone else that has this error cannot connect to the internet in the first place. I am (strangely) connected just fine then all of a sudden I get "Limited Access" with full wireless bars caused by an "invalid IP configuration".I have unchecked the power saving feature for the network card and tried disabling the firewall, but I'm not sure what else to do.
View 9 Replies View RelatedI recently switched to a new internet provider and now my Windows 7 Laptop will no longer connect to the internet.The error message says: "Wireless Network Connection" doesn't have a valid IP configuration if someone can help to explain why this is it would be great, there is also another computer in the house running Windows XP which works fine.The router is a: Quote: NetComm NB6PLUS4W Wireless ADSL2+ Router The IP configuration for the working XP laptop is: Quote: Windows IP Configuration
Host Name . . . . . . . . . . . . : Familycomputer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
In a few days time I will be changing my ISP in the UK from Sky to BT.
BT are providing me with their newest wireless router free of charge as part of the deal and I'll be using that to set up my wireless network, which will consist of an HP Pavilion desktop, a Toshiba laptop, a Sony Vaio laptop, an HP wireless printer and a Samsung HDTV.
This means my Sky wireless router is surplus to requirements, so I was wondering if I could convert it to a wireless access point to improve the range of my BT wireless network.
I've read a couple of supposedly easy-to-understand articles on Google and have to say they left me more confused than ever.
My computer fail to connect wireless after changing window. When I troubleshoot it tales wireless capability is switched off. I tray to click key fn F8 but no respond.
View 2 Replies View Relatedhow to configure my wireless router WNR500 to my existing wireless network
View 1 Replies View RelatedIs there a way to setup your computer to connect only to a specific wireless router in your area? I live in a college dorm and there are a lot of wireless connects available so I'm thinking that there might be complications with my computer with all the information in the air.
View 3 Replies View RelatedI have had this problem not being able to turn on the wireless radio for months. I have to get it turned on now. When I press <fn> F5 I can see the wireless radio is off. I see the power on button. When I select the power on button nothing happens. I expect the wireless radio to power on.I have tried fixing the winsock. I have run this MS fix at: How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista And I have run this bat file
** Start of bat file called renew-ip-reset-winsock.bat
ipconfig /release
pause
ipconfig /renew
[code]...
my new laptop will not recognise telstra broadband usb wireless! i have gone into device manager and then network adaptorsand it has an explanation mark on sierra wireless!!
View 1 Replies View RelatedF2 configuration for window7?
View 1 Replies View RelatedMy Windows 7 tells me that " IP address has an invalid configuration" How can I reset it?
View 1 Replies View Relatedi want to install win7 64 bit, but um confused about my PC configuration i hav
intel Core i 3 3.06Ghz
Gigabite H55 mobo
2 gb Samsung ddr 3 ram
500 gb Samsung sata hdd
and liteon 24x dvd writer.
i have a hp pavilion all in one and my cd drive is not reading any of the discs that i put in. when i check the system it tells me thst the drive is running properly. what should i do?
View 3 Replies View Relatedwhat is the best way to combine two SSDs and an HHD in a i5 system? P8Z77-v Deluxe, 16 GB 2100 Ram, i5 3.4, Seagate Barracuda 500GB, Windows 7 Ultimate. Want to buy either 2 Samsung 840 120 GB or 2 Samsung 840 240 GB.
View 14 Replies View RelatedI have a Dell Inspiron 1520 Laptop and stuck windows 7 RTM 32 bit on it. All was well but now connecting wirelessly is slow. Like slower then 56k modem slow. I have a Dell 802.11n wireless mini card installed that works PERFECTLY under windows XP. I was getting 80 % signal strength under Win 7 and getting 1 mbps where as in XP I was getting 78 to 100 mbps with the same signal strength. Oh and ethernet works perfectly fine.
For a time I was able to download the corresponding vista driver from dell and then replace the driver that win 7 automatically installs for it, then flipped the card switch off and on and it would work like it should for a while, but then reverted to the same slow network speeds once the laptop was reset or turned off and on. Now flipping the switch or re-installing doesn't work either. I've tried resetting the router, no go and none of my other computers or products have a problem with it. I've tried doing a few things suggested in other posts, like assigning a static ip, disabling ipv6, etc... Nothing has worked.
I'd love someone who knows what it may be or has heard of this precise problem, although I think I may be stuck waiting until Win 7 makes it debut in Oct and until Dell releases a proper 7 driver for it.
Laptop: Dell Inspiron 1520
Wireless Card: Dell brand mini draft 802.11n card
Router: DLink DGL-4500 draft 802.11n
Windows 7 32bit RTM