Just purchased Windows 7 oem, when I insert the CD the system doesn't see the disk in the CD drive.I've just installed a fresh install of Windows XP without any issue. Everything is operating correctly on my system.AMD Athlon 1.11 GHz Processor150 GB RAM 32 bit System board
View 5 RepliesI've just had a new mother board installed in my tower, now it's a Pent 4 3.4g. I used to have my two external HDD's connected to the old system configuration but now at startup, when it gets to Auto-Detecting External HDD's it takes for ever to do anything. I have to unplug them, then do a reboot and all is fine, but then have to plug them back in again.
I know from reading some post's that it's in the BIOS startup sequence but I'm not quite sure where and what to change in the startup.
In the BIOS Boot Device Priority I have: 1st - Floppy Drive, 2nd - [3M-ST3200800AS], 3rd - [ATAPI CD-ROM], 4th - [Disabbled].
I'm installing a fresh copy of Windows 7 Ultimate on an Asus UL80J. When asking where I want to install windows, I get "No drives were found. Click to load a driver". The drive is new, has no problems, and is detected in the BIOS fine. Also, my Windows XP CD detects the drive just fine. I've tried both options in the BIOS for setting SATA to IDE and AHCI. I assume I'm missing a SATA driver needed at installation time, but I can't find one online or from the manufacturer.
View 8 Replies View RelatedI purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
View 5 Replies View RelatedI'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened. Now however I cannot get it to detect any CDs. It will not load anything.Now I looked and I realized that my CD/DVD drive was not listed on my computer.
View 3 Replies View RelatedOkay, so I'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened.
Now however I cannot get it to detect any CDs. It will not load anything. Now I looked and I realized that my CD/DVD drive was not listed on my computer. I am trying to figure out what driver I had, so I can try re-installing it. I run a Dell Inspiron M5010 64 bit.
have two hard disks in my PC one is IDE(120GB) and the other is IDE(60GB). My PC is not detecting my IDE(120GB) hard disk. I have been replaced my jumper cable but it still not recognizing
View 1 Replies View RelatedLogitech usb hub is not detecting external hard disk seagate 320 gb fr. i have windows 7 ultimate 64 bit while connecting external hard disk directly to usb port its working but when i connecting this hard disk using logitech 4 port usb hub on the same usb port its not detecting but my pen drive is working through usb hub.
View 2 Replies View RelatedSo recently my desktop PC has been freezing at random times, and then sometimes restarting after not responding for a couple of minutes (no BSOD, just restarts as far as I've seen). It sometime freezes as soon as I turn the computer on, while Windows is loading, and sometimes it will start freezing after an hour it's been on. Most of the time it will just freeze for around a minute, and then unfreeze, but sometimes it does freeze and then restart. By freeze I mean everything, mouse included, and ctrl+alt+delete doesn't work.Also at bootup sometimes, it will fail to detect my SATA hard-drive and hang at Detecting SATA drives at the bios screen. This will be following by a disk read error.This problem started occuring a couple of weeks a go, so I reinstalled Windows 7 and it worked fine after that.
Running Windows 7
Bios: Phoenix - AwardBios v6.00PG
Processor: Intel Core2 Duo CPU E6550 @2.33GHz
2GB RAM
Graphics Card: Nvidia GeForce 8600 GS
How to make the installation DVD (Windows 7) with autologon (Administrator) but not with Unattended (Autounattend.xml)
View 3 Replies View RelatedI tried to reformat my dads hard drive to reinstall windows 7. It was in 2 partitions, so I ran the windows 7 disc and it ran through the motions, I formatted the c to re-install windows and it wouldn't let me. I went into dos under diskpart to try and format it that way, still no luck. I connected it to my computer then under disk management deleted the 2 partitions so there was only 1 now which had the size i.e, 600GB Unallocated. I connected it back into my dads computer and ran the set-up again. Now the computer wont even detect the drive. I need to re-format the drive to like factory default, is this possible, also do I have to do it in dos.
View 6 Replies View RelatedI accidentally recently over wrote my windows C: hard drive by trying to dual install linux on my laptop. I downloaded and burned a windows 7 64 bit repair disk but I have no point to repair it from! So I think I need a clean installation, is there anyway I can also burn an installation disk.
View 2 Replies View RelatedI was having problems with my laptop being very slow and was trying to do a full system restore. I didnt have the battery in when i tried to do the restore and unfortunately half way through the charger came out and switched the laptop off. i turned it back on and it says i had to insert my windows disc which i dont have. it wont let me do anything else now. ive tried downloading windows to disc but when it gets back to the restore page it says i need to have the windows installation disc and wont let me restore from an earlier time as these have all been erased. its a dell inspiron n5030, with windows 7.
View 1 Replies View RelatedYesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
I own a Dell xps M1530 with a: 2.0 ghz dual core processor, 3gb of RAM, and (currently) a 360gb 7200rpm hard drive. I have purchased Windows 7 professorial 32bit to upgrade from Vista. Not shortly afterwards my hard drive started to go so I bought a new one(better on of coarse) I want to upgrade the RAM in my laptop to 8gb and I need a 64bit os to do so. I now am using Ubuntu 64bit on my laptop until I install windows. I have legally got the installers for the 64bit version of Windows 7 professional. I am planning on using the same key for the 64bit version which after research I believe will work. Right now I am having problems installing 7. I would really like to not have to waste a DVD to install it. I used some Microsoft utility to extract the ISO to a thumb drive which, I believe is bootable in the purpose of installing 7. Every time I try loading the os from the Thumb drive I get this error message:
Error: Unknown file system
Grub Rescue
Also, the Setup.exe file for installing windows doesn't seem to run under a linux operating system even with wine.
My friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
My computer has been unable to boot to the Windows 7 installer for the past two days. My boot order is correct I have confirmed that the drive works (It runs a live CD of Ubuntu just fine). I have checked that the disk works (it boots fine in another machine). I have used this same disk on this computer before several times before with successful outcomes.
My diagnostics come back successful as well. I'm on a Dell Studio 1735 (from 2008). I'm really at a lost as to why it's not booting to the DVD. I'm currently typing this from my Ubuntu partition; I don't have convenient access to a Windows machine at this point.
my computer crashed and is trying to reinstall windows 7, all the files that were on my computer have been backed up and saved on th hard drive insider a specific file that the computer chose. The problem I am having is when I power the computer on the windows startup screen appears then a error message appears stating that the computer turned off or unexpectedly restarted click OK to restart computer to re-install windows 7. My computer was purchased brand new with all the software preinstalled, no disks were included or provided with the purchase. How can I or do I reinstall windows 7 when I do not hve the installation disk. Apperantly all software files/programs r an can be located within the hard drive of the computer I don't know where or how to even try to locate them.
View 2 Replies View RelatedI have a Lenovo Y560p 64-bit i7 machine sold without a recovery or re-installation Win 7 disk. It has a so-called OneKey Recovery button which will in theory recover or re-install Windows 7 from the O/S info stored on a special HD partition. But I would like a DVD-Rom that boots the computer and does a re-installation of Win 7 should Windows break down. How do I create such a disk?
View 5 Replies View RelatedThis issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies View RelatedI had a retail version of the genuine edition of Windows 7 Ultimate edition, but I threw away the disk upon moving. However I do still have the CD key for it.I'm wondering how I can do a reformat of the hard drive without a CD/DVD. If there's an official ISO file out there anywhere, I could just enter my CD key again.I have no way of getting to the desktop right now because of BSOD on boot.
View 3 Replies View RelatedThe only way I could get rid of it was totally wiping my 2TB WDigital drive SATA. Now after I used KillDisk, I boot up the Installation disk and after the 'Starting Windows' screen, it goes to a black screen with a blinking cursor. Now, I know it's not the disk because I have a laptop that I was able to boot it up on and install perfectly fine. I know it's not the CD/DVD drive because I was able to boot other disks such as KillDisk with no problem. I'm not sure if there was still something I needed to do after wiping it with KillDisk to make the drive usable again. Also, I tried using another hard drive I had laying around which was a 320GB SATA. That one had some different problem booting up the Windows that was already installed on it. So.. again I used Killdisk and it does the same thing after wiping it.
View 9 Replies View RelatedI have a Z77 mobo with a new SDD and a HDD from the old PC. At first I installed Windows 7 to the SDD and I could only boot into it when I disconnected the HDD. When I started PC, the logo was shown for a second or so, and then it went into repair mode, the "preparing installation files" progress bar ran twice and the system booted into GRUB that was left on the HDD. I've tinkered in BIOS a lot trying to fix this, but to no avail.Now I've decided to also install Linux (OpenSUSE 12.2) to the SDD, and hoped that GRUB2 would solve my problems. Nope, it didn't detect my Windows 7 at all! (however, it did detect the two(?) old Windows 7 mount points from the HDD). I couldn't even get to boot it by forcing "Windows Boot Manager" from BIOS. I tried to fix this with DVD repair, at first I couldn't get it to work by launching the DVD in UEFI mode, the other one worked, but it only messed up my GRUB2 and I couldn't boot to either system. After some unsuccesful tinkering with bootrec, I found this thread and followed what OP and the best answer guy did, which sums up roughly to this:
Code: C:> bootsect /nt60 C: /force
C:> diskpart
DISKPART> select disk 1
DISKPART> select partition 3
DISKPART> active
DISKPART> extend filesystem
DISKPART> exit
C:> bootrec /rebuildbcd
Then, Windows Repair detected my installation and said it fixed the problem. Now I still can't boot into my system normally (again, it reboots after "Windows is loading files"), however, I can get it to boot after the timeout ("Press any key to boot from DVD") from Windows 7 installation disk! I have no idea what's going on.Here is a screenshot from diskmgmt: The strange thing is the 128MB partition - I suppose this could have been MSR partition, while gparted shows it's a Linux partition! Is this possible, that OpenSUSE installer messed it up?
Also: Code: C:Windowssystem32>bcdedit /v
Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
path ootmgr
[code]....
So i burned an .ISO Windows 7 ultimate ( 64 bit ) right now im running on ( 32 bit ) I can't install directly trought dekstop because i get this error "this installation disc isin't comaptible with your version of windows.." So i tried to boot with installation disc, after "setup is loading files" or something, i just get a windows 7 start up screen no letters or anything it just stays there. Only the cursor blue wheel thingy spins for few seconds. I tried different installation files.
View 7 Replies View RelatedI have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card. I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. However, During installation, my hard disk is not being detected (There is no drive on screen which I can format or set up on.) Can anyone help? Do I need to update my BIOS?Also, I recently changed my hard disk (upgraded it) and XP has been installed and is running fine.
View 3 Replies View RelatedDVD drive can read MS Office and XP installation disk but not Windows 7 DVD.
View 4 Replies View RelatedI am trying to reinstall windows 7 on my desktop without a installation disk I have powered it on an pressed the alt & f10 then pressed enter. The computer has backed up and restored settings completely upon completion I selected finish, computer then restarted windows logo appeared and then a black screen with "setup is starting services" appeared. The screen has not changed at all and it has been several hours. Is this normal?
View 2 Replies View RelatedI experience a problem whenever l install a recovery disk for windows 7. The error message is I / O drivers not found.
View 1 Replies View RelatedNo install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
View 5 Replies View RelatedI wasn't to create a Windows 7 installation disk that does not have ANY of my old files on it. I'm going to install Windows 7 on another computer other than mine. (And yes I have another license key) Is there any part on my hard drive that contains just the installation files?
View 3 Replies View RelatedI'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.