The daughters laptop which runs Windows 7 and when she tries to boot up the computer it gets as far as the desktop and then a blue screen appears. This blue screen appears even if i try and boot the machine up in safe mode? I am unable to tell you what is on the bluescreen because it only appears for a few seconds and then the machine shuts down?
View 5 RepliesYesterday when I turned on my laptop windows wouldn't start and launched its error recovery. When I launched the startup recovery it gave me a black screen for 5 minutes, then an Acer desktop screen with nothing on it. The loading light will stay lit up for 5 minutes and turn off without the computer doing anything at all and stay at that screen for hours on end.
View 3 Replies View RelatedI've just tried to upgrade my PC's memory from 8GB to 16GB and have hit a rather worrying problem in that the PC now refuses to boot. Initially, once I'd replaced the old memory modules with the new ones, I got three beeps on power-up, which I quickly established was the result of my not properly seating the modules. Once I'd made sure they were firmly inserted I tried again, and this time all I get is the computer powering up - so all the lights come on and the fans kick into life - but then it powers down again without even attempting to boot: I don't even get to the BIOS. After a few tries I decided that it might be an issue with one or more of the new modules, so I swapped them back to the original 8GB kit and I still get the same problem. My PC is essentially DOA. Whilst I was inserting/re-inserting modules I did try to avoid and issues with static discharge. I wonder if perhaps I've disturbed a connector somewhere, although I couldn't see any signs of this when I re-opened the case to check.
The new modules are a 16GB Corsair Vengence DDR3 dual-channel 4-module kit (4x4GB). They were replacing a 4 module 8GB DDR3 dual-channel kit (4x2GB), so in both cases all four slots were in use. Motherboard is an Intel DP55WG, which is listed by Corsair as being compatable (16GB is the max for this motherboard). I've been running this system for two years prior to my upgrade attempt this evening, and it's been rock solid with no issues.
Maybe I should reset the CMOS for instance? Note that I'm not a hardware guy, and messing around inside the case isn't something I normally even consider trying... But I thought that this would be a very simple, trouble-free upgrade!
My friend just dropped off her computer saying that its not turning on.I plugged it in, and powered it up, and a black screen came on saying a few things, including the name of the HDD, the name of the computer, etc, but three of the lines it showed caught my eye, so i felt like i should share them with you:
-System BIOS shadowed
-Video BIOS shadowed
-Error: 0211 Keyboard Error
it said press any key to continue, so i did, and it booted to the login screen, but after that, it just went to a black screen with a mouse that was incapable of movement.I force rebooted, and now, just like she had described, it refuses to turn on. The HDD light is blinking, and the fans are going, but the screen doesn't show anything.Apart from that, I haven't had much time to look at it, so i apologize for not being able to give you all more to go off of.
just got a new motherboard and wanted to reinstall windows 7 64bit but the installer just keeps freezing on me , not crashing ,just after windows loads the files and then the windows 7 wallpaper comes but then nothing happens after that i can still move the mouse so is not crashed like i said.i tried installing the other way from inside windows but once it copys all the files then reboot it freezes again, but this time with the words "windows is being installed" or something along those lines
View 9 Replies View RelatedI have a problem that makes me want to destroy my laptop. I use sleep mode a LOT. Until today, it used to actually enter sleep mode. Now, it turns of the screen, and HDD activity seems to stop (At least the light turns off). But it never actually sleeps. In fact, it seems to use MORE power somehow. I usually get ~5 hours on battery. My new awesome sleep mode is so good it consumes the battery in just 3 hours.
ASUS U46E
i7 2620M
8GB RAM
512GB SSD (Crucial M4)
Win7 Ultimate x64, up to date according to WU
[code]....
I have a laptop, Acer aspire 7001, and it runs on Windows 7. It ran fine for a year, but a couple weeks ago I dared to install windows updates. There were a lot of them, including SP1. I restarted, but suddenly windows wouldn't open. I managed to start in safe mode and found SP1 wasn't installed correctly. I removed it, ran a couple scans (antivirus, malware, register) and restarted. Still windows won't start in normal mode. A memory scan found nothing wrong. CHKSDK finds nothing. Startup Repair sometimes says "restart to finish", and sometimes "cannot repair". I have written down every startup repair error report.
I tried to use Windows Recovery, but found all restore points had been removed! Furthermore, I tried to use the windows 7 cd, but the laptop refuses to read the CD. It's not just with the windows cd (which works on other computers). The BIOS recognizes the CD reader, but it seems unable to read cd's. So I'm guessing there's a hardware problem there.
[code]...
I recently upgraded my computer by adding a pair of kingston 64GB SSDs in raid 0 and reinstalled win7. This worked fine and the computer was working without any issues.I then upgraded the ram going from 4 to 8GB and initially windows refused to boot. I discovered I'd reset the bios and lost the raid settings. Having reset the raid I tried to see if the machine would boot into windows and win 7 said it had to do a system repair as the data was corrupted.I tried this and from thern on the real problems started.What happens now is that when booting from the Cd (so I can reinstall win7),the system starts fine, runs the post and then says windows is loading files. Once the starting windows appears in the middle of screen and the animation is just about to start running, the screen changes, the computer crashes and a thick red line appears across the top of the monitor.
Current system config:
Asus P5N-E Sli motherboard
Intel Q6600 CPU (not overclocked) 2.4GHz
8GB Kingston HyperX dual channel 800MHz CL 4-4-4-12
Nvidia 8800GT graphics card
Creative Audigy 2 sound card
Vantec PCi-E Sata card
Asus/ViXS TV tuner card
2x Kingston 64GB SSD
1x 500GB Seagate
1x 2TB Seagate
2x DVD burners
When i put a Windows 7 installation Cd in my Hp laptop,the notice i get is Hard drive not found
View 1 Replies View RelatedI have a brand new printer Canon IP4850. The driver installed like a dream on an old desktop win XP, on my laptop which is Win 7 32bit. Only on the Acer Desktop Win 7 home edition 64bit it refuses. Windows claim it encountered a "catastrophical error" (????) and error 0x080000FFFF. I tried the driver on the cd which came with the printer, I tried the download from the Canon site: nothing. Microsoft claims it is a Canon problem and Canon states it is a Microsoft problem. I tried to rename the softwaredistribution folder (result: 0). As to me there is something in the setup of Windows (Acer only delivers image dvd's, not original Windows dvd's) which stops drivers from installing. As this desktop is the printerserver of the house, I would like to get it to work!
View 12 Replies View RelatedMy Windows 7 Home Premium x64-based system will not prompt me for a password after the system resumes from standby or from the screen saver. I have both settings in place - I have the screensaver's "On resume, display logon screen" check box selected, AND I have the Power settings option set to "require a password on wakeup". However, neither setting works. I even set the "ScreenSaverIsSecure"="1" registry entry, but it had no effect. After the system resumes from standby or when the screen saver closes, the desktop is available with no password prompt.If I manually log off, or reboot the system, I am prompted to select a user and type the password, so the passwords are correctly in place.
View 2 Replies View RelatedI have tried to configure some notification icons to display and others to be hidden. Win7 respects my settings during the session but after a reboot they are back to whatever they were before. Its a real productivity killer for me. I am running inside a standard account. I thought about trying to change the settings in the Admin account but the icons I need to customise don't appear there.
View 1 Replies View RelatedI have a HP Pavilion laptop which came with Windows 7 Home Preinstalled. On the back of the laptop is a coa product key. Recently the hard drive failed. I was told that I could easily get a new drive which I have done and I have run the system test and the new drive passes. However although I have a HP system recovery cd, i do not have any installation cd's for windows as HP don't give you any.
I've tried using the recovery cd but as the new hard drive has never had windows 7 on it, it refuses to work.
What do i do now? Why don't HP give away the software with their computers. It seems fairly logical that maybe one day in the future you might need to install a new hard drive. I'm not exactly enthused about paying for the software when I clearly have a legal key on the back of the laptop.
So I'm trying to install Windows 7 via XP SP2 but every time I try it gets to the expanding files part(27%) and cancels the whole installation saying Windows could not prepare the computer too boot into the next phase. I ran a chkdsk scan on the drive and unplugged all USB devices and some people said that Windows couldn't find the HDD Controllers so I installed my chipset drivers too but still nothing.I can't really format these partitions(especially C: since I need the XP installation on it to install Win 7)What could be cause of this? Can a damaged or missing bootsector(or bootmgr) be to blame?
View 2 Replies View RelatedI have Windows 7 Home Preimium and use a Logitech g35 headset. I use the headset as default for audio and speakers, and actually broadcast a Internet Radio Show with it weekly for the past number of years, as well as using it for other high end audio recording and voice overs. I have gone through the Wizard for the voice recognition and it refuses to register or see the microphone when it comes to reading the script. I have tested the microphone on Audacity and it records properly. Sound is working properly, just not being accepted by voice recognition.
View 1 Replies View Relatedwhy does this PC refuse to take Norton this is fumb it has been this way since I got it but mylease is now done from easyhome Norton tryed to install it manually still no darn go so anyhow now got MicroSoft securrity essentials.
View 1 Replies View RelatedI have 3 corrupt installations of the same OS (Windows 7 U. 64 bit) in the same hard drive. I can't install any OS(es), and my original (working installation) no longer works. These corrupt installations are corrupt because windows installed incorrectly twice they left old windows instead of creating a windows.old file.When I try to start up any of these three installations, I get the same error: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation."This also happens upon completion of reinstalling windows.I have tried to wipe the drive:most programs I see need windows to operate...I've tried a few programs that can be booted, DBAN boots, but I get the same error every time: That DBAN has encountered a non-fatal error and that the error is usually caused by damaged disks.
View 2 Replies View RelatedWhen I try to run a java applet on Firefox or chrome or IE it just freezes and it ends up going to not responding and I have to force shut my browser. I uploaded a screen shot of what I get when I try to click on control panel -> Java(32-bit). I need to figure this out because I need to start school in Jan. and I need to be able to run Java apps. Please help me. I have tried uninstalling and reinstalling Java over and over. I end up getting this problem when I go to java.com and click on do I have Java then it says something about a plug-in and do I allow it, when I click yes it starts to check then it stops and freezes. I am also using Windows 7 Ultimate 64-bit. Service Pack 1
Description: A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangXProcB1
Application Name: chrome.exe
Application Version: 15.0.874.121
Application Timestamp: 4ec1cf8b
Hang Signature: c8e4
[code]....
Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
recently, my open notepad window seemed to have disappeared from my screen. couldn't bring it back, so "unpinned" from the application task bar.but now - it refused to open at all - when i try open it from the start menu, or trying to open it with the actual exe file in windows32 folder, and even doing right-click and Run as Admin
View 12 Replies View Relatedam i alone in the fact that flash refuses to play nice with Windows 7. and no browser is immune to it's deadly ilk, that Windows 7 is starting to emanate. no sou gesly folks, it doesn't matter what browser i try to get flash installed on, it jus will not happen.
unless one of you geniuses figured out a way..... eh?
A program I use frequently (VuePrint) refuses to let me change the .ini file to a particular opening directory. There is a line in the .ini "Directory=C:" I have attempted to change it to "Directory=C:User1UserDownloads" to no avail. I have changed the file logged in as "Administrator" and as the only "User" of the system. Once or twice the change worked, but at next log on, the .ini file had changed back to the original setting. I have searched the registry and no .ini file reference is there. Yes, I have saved the file using both "Save" and "Save as."
View 5 Replies View RelatedHave removed Adobe Flash and Reader plus all the Java stuff (after the warnings) and have tried a fresh reinstall of the Flash player and was going to redo the Reader which was throwing up update issues.
Now i did see something about JavaScript in trouble shooting with the Adobe download
when I close the lid and open it again the screen doesn't turn on and still closed and I have to shut down from the button. also I edited the power options to do nothing when closing the lid.
View 4 Replies View RelatedI'm running into a problem with an uncle's custom desktop where the wireless network is refusing to enable, even after enabling the connection.Here is a brief history;
1) Buy and install a Belkin wireless USB adapter. Wireless networks is enabled, but not picking up any SSID. Insure WLAN auto-config is enabled and no 3rd party wireless managers are installed.
2) My Uncle returns the Belkin and gets a Linksys by Cisco USB wireless adapter. Wireless network connection is disabled. Attempted to run the installation utility for the USB adapter, however it errors out stating the windows wireless manager isn't managing the wireless network. I went into services.msc, disabled WLAN auto-config, and re-enabled with the same issue. I thought something with Belkin may have hi-jacked the wireless management so I ran revo-uninstaller against the Belkin to remove the application and any related registry keys. Unfortunately the issue persists.
3) Even after telling him that it isn't an issue with with the USB adapters, he returned it for a NETGEAR PCI adapter. Again same issue, wireless networks show disabled, enabling the connection says it is successful, but the connection never enabled.
One thing I didn't mention is that the devices are seen in device manager, so its not an issue with the devices not being detected.I'm currently doing a System restore(taking a little while) to make sure there was nothing missed between the Belkin where Wireless network connection was enabled. I'll of course be updating with my results when it is done.I know this has to be something stupid that is causing it(When isn't it something stupid). The only thing that I can conclude at this time is either the 32 bit OS running on 64 bit capable equipment or something is really screwed with the OS; luckily my uncle is willing to format and reinstall if all else fails
I use a Gateway HD monitor, it's currently set to 59 hz, I need to get it up otherwise the monitor will just shut down while I'm playing games. I've tried everything, I tried to change it in the nvidia control panel but it just default back to 59 hz. I've tried the advanced settings in screen resolutions and the result is the same.
View 4 Replies View Relatedwhich is why some programs trigger the screen saver not to activate ?
View 2 Replies View RelatedI recently formatted, and since, my pc refuses to remain in Sleep/Hibernation mode. When I select the option in the start menu, my pc does its thing, once it enters sleep/hibernation, it instantly powers back up. I have changed nothing to my pc's hardware since the format, and this issue never occurred before hand.
Some of the things I have tried are making sure the power management setting were correct. I also hard reset my motherboards cmos to manufacturer settings.
The above seemed to make no difference.
windows live mail cannot send ,receive, send through, answer messages,neither works viewing providers web mail, java indicates only 63%, cannot debug Line 2670 of Live Mail id eroor Ox8ccc0002, Windows 7 Home Premium, 64 b, IE 8,,AMB Athlon X4 Quad Core,2,8 GHZ,4GB memory,1 TB HD
View 1 Replies View RelatedMy taskbar comes and goes. It refuses to stay pinned to the bottom of my screen.
View 1 Replies View RelatedI have an Oki B4350 printer that doesn't like to work under Windows 7, either 32 bit or 64 bit, but it works perfectly under Vista. Everything I try to print something, the printer just says "invalid data" And refuses to print anything. I've tried looking but the official site has no drivers that I can use, as it says that the drivers come with the OS.
View 7 Replies View RelatedIt loads fine on my tablet, it loads fine on my phone, and it loads fine on my old PC sitting right next to this one. But on this one it hangs and I eventually get this error: "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset."So the things I have done so far to try and fix it are;Virus scanSpyware scanMalware scanipconfig /release /flushdns /renewCC CleanerManual change to Google's open dhcp serverMultiple router resest/PC restarts3 different web browserschecked my "hosts" file to make sure it didn't somehow get redirected in thereIf I use a proxy site it works fine, but I cannot get it to come up any other way. And the website will not allow connecting directly by IP address as I tried that also and it doesn't work even on systems that will load it properly.
View 5 Replies View Related