Windows 7 Is Making Sound Of An Untuned Guitar
Aug 11, 2012
instead of the normal sound when you click a program and get an update that shows up in the bottom right hand corner of your desktop, mine is making an instrumental noise and i really dont like it, this happens everytime im supposed to hear the normal noise
View 1 Replies
ADVERTISEMENT
Aug 29, 2011
I want to know about the hardware and software. Will the Guitar Hero run on 7 64 Bit? Also will the devices from Guitar Hero and Rock Band work?
View 2 Replies
View Related
Jan 30, 2012
The problem is my laptop/notebook always making the "click" sound (the sound that like you open a folder in windows) although I am not doing anything. When I turn off my laptop today, then I opened my laptop for the next day it making the same problem. I don't know how it's happened. I am using windows 7.
View 7 Replies
View Related
May 21, 2012
It just won't do anything except get stuck. I have the actual disk and i have used this on a 64 bit system before, so what's different now?
Also, my Xbox 360 Wireless Gaming Receiver isn't working on here. So far i HATE 64 bit to the MAX!
View 6 Replies
View Related
Aug 24, 2012
I recently purchased a Lenovo Thinkpad Edge E520 Laptop with 8GB RAM & Windows 7 Home Premium on 20th August 2012..For the whole time I have the laptop turned on at the top left side of the laptop I can hear repetative scratching / clicking sounds, Can someone please help me with this as i'm worried if I should get it fixed as soon as possible!
View 13 Replies
View Related
Aug 7, 2011
When I change a file and then close it I get no sound when the pop up ask if i want to make changes. I tried different things in control panel under "sounds" but was unable to fix this? I assigned a sound to "menu-pop up" and "close program" but when, for instance, I open a note pad document, change a letter and close it a window opens asking me if I want to save changes but I still don't here a sound like I do in XP?
View 2 Replies
View Related
Oct 8, 2012
Computer freezes suddenly making a beep sound (loop),none of the keyboards or mouse commands work.Sometimes it doesn't even freeze and suddenly shut off.Its two years i have been using my computer, until now no such problem had occured. In between there was BSOD but it went automatically. After shutdown when i start the computer,it doesnt start in a single attempt,the cpu light goes on and off ,then i have to again switch it on and maybe it will start
View 3 Replies
View Related
Jan 10, 2012
I had audio lagg in battlefield 3 so some guy told me to update my realtek HD audio driver and it will be fine So i did and after installation my speakers started making this weird anoying sound i can't stop it and in my realtek HD audio menager started saying that i've plugged in audio device and after that it says that i have unplugged my audio device but the point is i didn't plugged in anything and goes again and again.
View 5 Replies
View Related
Oct 3, 2012
my packard bell easynote lj65 will keep making beep sound until it gets to window environment, when i trouble shoot, i found out that the keyboard is actually the problem, then i disconnect the internal keyboard and attached external USB keyboard and it works perfectly. then, when i couple it back and power it on, the power indication light will be on but nothing will be displayed on the screen.
View 1 Replies
View Related
Mar 31, 2012
I've recently switched to Digital Audio (S/PDIF) (High Definition Audio Device) using one Toslink cable instead of all the analog wires going from my PC to my receiver.The digital sound is amazing, CD quality from my PC is great.However, I now also receive the digitized sound of pages being loaded as I surf the web. All sound comes out digitized when loading a new page.Is there a way to stop this from happening while listening to music or course material without gong back to analog?Can I have my digital CD quality and enjoy it too!
View 1 Replies
View Related
Jan 15, 2013
Now, I actually have the exact same OEM disk of Windows 7 Home Premium installed. I have a sister that seems to think she owns my laptop. I have considered splitting my HDD partition into 2 so that I can have my own installation and part of the drive. The problem is that if I screw something up, my sister will have a cow (it's the only place where she stores her iTunes, etc. and she's stubborn to use anything else, she wouldn't even accept it on backup). Can I also have 2 of the same OEM copies on each partition? If not, I'm Out of luck.
View 7 Replies
View Related
Oct 5, 2009
I am trying to get Windows 7 up-and-running on my Toshiba M200 tablet with an SSD.
The problem is that I do not have an external DVD and these machines don't allow booting from USB.
I've managed to get a fresh install onto the drive by installing it onto a partition of the old disk based drive and then copying this over using Norton Ghost. Unfortunately I cannot get this to boot, which I assume is a problem with the MBR.
I have a second machine running Windows 7, and If I mount the SSD using a USB caddy it all seems healthy and is marked as an active partition. Is there any way to get this drive booting without being able to load up the repair functions on the DVD?
View 8 Replies
View Related
Oct 25, 2011
I bought a computer that had Windows 7 on it, but didn't have an installation DVD. Well, I am unlucky or something, but twice over the years my Windows installation got corrupted or somesuch, now I would like to make a backup of it in case, without having to purchase a license of course. How would I do that? Do I have to download files? Insert a DVD and run a special program or something?
View 3 Replies
View Related
Jan 19, 2013
I have a other internal hard drive, I wanna use to copy my windows image and make it bootable if someone happens to my main drive
I already created window image Back Up & Restore > Create a system image > Put it on my internal hard drive Remove my main drive And it doesn't boot from the backup hard drive?
View 6 Replies
View Related
Jul 5, 2011
I downloaded the Win 7 Home Premium Upgrade ISO file from MS and am using MagicISO trying to make it bootable. Magic tells me the file is bootable ( and it will now open in the DVD tray) but the computer will not boot to it.I want to do a clean install, but feel as though I've hit the wall. For the time/money I've already spent I could have bought the full version at Walmart.
View 5 Replies
View Related
Dec 29, 2011
I'm helping a friend with her windows 7 emachine (64 bit) and when its all back in working order, I'd like to make her a set of recovery discs but I have a few questions before proceeding. I read that you only get the option of doing it once - so it better be right the first time.I've found instructions for making a repair disc, also instructions for creating recovery discs - would those be the same? The computer did not come with any os disc at all, so I'm wondering if making repair/recovery disc is possible without an os disc?
View 14 Replies
View Related
Mar 28, 2012
I bought a refurbished dell laptop with windows 7 on it the other day but I'm normally a linux user. I am trying to make a disc image but it is behaving a bit weirdly. I follow the steps but after it made the first disc, it tells me to insert another disc and also label it newuser pc with the date and the number 1. Not long ago, I made back up discs for a friends windows 7 desktop and it did not behave this way, it instructed to use 2, 3, etc for the next discs. I'm not sure if this thing is making any progress or not.
View 5 Replies
View Related
Dec 9, 2012
I intend to load Ubuntu 10.04 onto my home desktop machine while retaining Win XP as well. I'll be creating a dual boot system, in other words, and then using XP only to run Photoshop. The rest of the stuff I need to do gets done just fine with Firefox, Open Office and Thunderbird.
The discussions about how to do this indicate a "restore disc" for XP should be created prior to starting, unless you still have the disc that came with the system.
I have the original Dell OS "re-installation" disc, still in the envelope with the key printed on the back.
My question: is the "re-installation" disc that came with the computer the same as a "recovery disc"? If not, what is the difference? And how do I go about creating a "recovery" disc.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 13
[Code].....
View 2 Replies
View Related
Aug 11, 2010
I bought a new laptop with OS- DOS so what i did i bought the Windows 7 dvd and installed it. Everything was working fine then i decided to make partitions pf my HD. As i had 3 partitions c,d,e. Where i installed Windows 7 on 'c' i decided to leave it and shrink my d and e drives.Now when i first shrink my 'd' drive a message poped up regarding os with an option yes or no...... i dont know wht hapend to me as i did not read the message and hit yes since pressing no would have led to no partitions at all. now after that i made several partions that message didnt pop up again.Now when i restarted my windows it got stuck at the black screen with a blinking cursor.
1. Re-install windows i reinstalled it and when the final restart takes place b4 win launch same problem.
2. Deleting all partitions. Leting only one partition remaining.Unable to do that .... if i try to do it while installing win options.... the delete option is in active for new drives as it says " win cannot be installed in this drive".Now i am also unable to some how get into dos prompt to delete them from there...
View 8 Replies
View Related
Jan 18, 2013
(Long story below, feel free to scroll to the bottom paragraph just to see what the problems are I am trying to fix).I've been trying to get help on this issue all day and I am at the point in being lost that I am close to just finding out how to wipe the drives clean entirely and not use my SSD for my boot drive. So heres my issue.Yesterday I built a new computer. It has a M4 Crucial 128GB SSD and accompanying it is a Seagate 1TB HDD. My plan was to make my SSD the boot drive (which was easy enough) and then use the HDD for mass amounts of storage and just put a few of my most used programs/applications on the SSD to improve the speed of them. Well turns out that it wasn't that easy because I didn't think before hand to make changes or anything and all of the things I have been downloading/putting on the new PC have been saving on the SSD, a few things that were selectable for installation I manually put into the HDD (another problem with that coming up.Essentially when trying to delete a few files from the HDD I didn't need, I was told I wasn't able to due to not being the owner of the file (the folder is owned by SYSTEM) and all of the google-able solutions I tried didn't work such as changing permissions and setting my user account as owner.So essentially I am REALLY hoping, for the sake of my sanity and frustration level with building a new pc () that you guys can help me figure out why it won't delete these folders (nothing in the folders themselves are being used) and help me setup my HDD to be my primary drive where files/programs/folders save and being able to transfer files from my SSD over to my HDD. I am new to the whole SSD thing and already am regretting it despite how amazing its performance is.Edit: Also just to give you a bit more information, I am using a Windows 7 Home Premium 64Bit disk (OEM) to install windows.
View 4 Replies
View Related
Sep 17, 2011
Keyboard shortcuts are very important to my computer use, which brings up a small but annoying problem I've been having in Windows 7. In XP I was able to place a shortcut to a program or even to a particular file on my Start Menu. If I then renamed the shortcut on the start menu with a unique initial character, I could start a program or access a particular file simply by hitting the Start key and then an initial. For example, for my most common Microsoft Word file, I need only hit Start and then the letter x, and up pops my most commonly used file. In Windows 7 when I try this I am delayed while Windows performs some sort of search for items starting with an x.
In a moment or two, it discovers there is only one such item, and it offers me this item in a list and I must hit enter to get the item to come up. The negative effect of this is still more pronounced when I start a new session and I know how want to open say three separate files/applications. In XP I can do this very quickly if the names I gave the shortcuts are unique. (And even if I have multiple items, say starting with the letter m, the Start men lets me essentially choose which m item I want by repeatedly hitting m. Very quickly, I learn that such and such file is: Start>mm>enter.) Is there a way to tell the Windows 7 Start Menu to behave like the XP Start Menu, at least in this regard?
View 5 Replies
View Related
Sep 26, 2011
I only moved from XP to windows 7 because of BF3,but so far ive encounter many problems
-Delay in typing on Firefox and Chrome
-Slow web browsing
-Itunes Freezing
-Mouse double Clicking when i single click
None of this happend when i was using XP and i have gotten any new hardware.There is no viruses either
View 1 Replies
View Related
Oct 2, 2012
I want to make dual boot because of battlefield 3 does not support XP. So, I have the disc with partitions C and D. There is Windows XP installed on D. I dont want to lose my data from D so my question is if i can format the C partition and install Windows 7 there without losing the data on D.
View 11 Replies
View Related
Oct 15, 2012
i just copy windows 7 data from win 7 dvd and corupted my win 7 dvd how to make windows 7 bootable dvd from data on my hard drive
View 2 Replies
View Related
Dec 24, 2012
In a new build I'm trying to create a RAID 1 array with two 1TB drives. The drive mode is set to RAID on the Motherboard, and I was able to successfully create the RAID within the Intel Rapid Storage BIOS. Once booted into windows, in the Intel Rapid Storage Technology Window it says recognizes that the RAID is there and says the status is normal. It has been initialized through this program also (although i have read that there is no need to initialize for a RAID 1). In Disk Manager I can see my SSD that windows boots from, and 1 WD 1TB drive (There is 2 there though, but this makes me think that it sees that its a RAID) and it shows it as unallocated space. In "My Computer" the only drive i can see is my SSD. So i guess my question is what do i need to do to make Windows see the RAID in "My Computer"? This is my first RAID build so im new the the RAIDing world.
System Specs:
Gigabyte GA-Z77X-UD3H
Intel 335 (OS Boot Drive)
2X WD Caviar Black 1TB HDD (For RAID)
View 1 Replies
View Related
Sep 5, 2009
is there anyway of making every email in windows mail viewable. When i say this i mean can i see everything in there all the images videos etc without allowing the content and sender in each one?
View 4 Replies
View Related
Feb 8, 2012
Just got my new Windows 7 64-Bit Pro desktop last month, but I noticed that its hibernation feature doesn't function like my laptop!
tech support tells me that given my hardware (apparently, it's a motherboard issue), it's actually impossible to configure my desktop's hibernation to behave like it does on my laptop!
1. How can I get my desktop to hibernate like my laptop? That is, have it save my session to disk and shut off completely, resuming only when I power it on again (IOW, I do not want "hybrid sleep")??
2. Why did Microsoft think to do things this way?? Why take away such behavior for desktops -- it's obviously something programmed into Windows 7 already; why have hibernate disabled for desktops, replaced with hybrid sleep??
note that I am not interested in turning off my mouse and keyboard -- I do like using "sleep" when I'm on the computer all day! It's just that when I expect to not use my machine for another whole day I'd like to save my session but have the desktop off, drawing absolutely no power (and, more to the point, not have vibrations wake up the computer)...
View 4 Replies
View Related
Oct 13, 2012
I am going to be reformatting all the laptops before resale. Now downloading all the updates is very frustrating, but I have been advised to use a piece of software called Macrium Reflect, which basically copies the complete hard drive, so you have a perfect back up.So my plan is to make a fresh install of windows, update Windows fully, and them make an exact image of that hard drive. What I then plan to do, is install this copy onto all the laptops (Using the unique windows key), which basically saves me wasting hours per laptop updating.My problem is, when you format a laptop, some drivers are already installed, where others are not. I do not know exactly what determines why some drivers are already installed and some are not, but anyway, if I took the complete image of the hard drive, of lets say a Toshiba laptop, then put all that data on to an Acer laptop for example, would I get conflict between already installed drivers?
By this, I would not install any manually downloaded drivers onto the Toshiba until after the image is taken, meaning the only drivers moved between laptops are the pre-installed ones.
View 9 Replies
View Related
Oct 16, 2011
I was wondering if anyone knew how to make a shortcut to windows security screen. Not to the lock screen but the CTRL+ALT+DEL screen that has the five options (lock this computer, switch user, log off, change a password, and start task manager
View 3 Replies
View Related
Mar 29, 2012
I have an HP desktop computer that I just bought an SSD for. I made the "recovery media" disks, I'm assuming that's the OS backed up? I want to make the SSD my boot drive. I put in the disks and unplugged the HDD and plugged in the SSD and I'm at a screen called "Recovery Manager". Do I do the "factory reset" to install the OS on this SSD?
View 4 Replies
View Related
Feb 4, 2013
That's basicly it. Running Windos 7 Home Premium on a newer Toshiba computer. Startup will act all fine and dandy until it reaches he part where the Windows sysmbol shows up is says Starting Windows. From there... well, that's it. I've left it there for 20 minutes and nothing happened. It does launch in safe mode.
View 2 Replies
View Related