Windows 7 Fail To Boot After Windows Update?
Jul 9, 2011
I restarted my windows 7 Compaq NX 7400 laptop yesterday after an automatic windows update and since that time I have been unable to reboot my laptop. I have tried all recovery/repair options on the windows installation disc but to date now have worked.The message shown is "Windows failed to start. A recent hardware or software change might be the cause". I having exhausted all the repair options and now worked, I opted to to do another installation on the same partition;after all files were copied and the machine rebooted I ran into the same problem; only this time the error was "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: File: windowssystem32winload.exe status:
View 9 Replies
ADVERTISEMENT
Oct 25, 2011
I recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies
View Related
Jul 9, 2011
I am running windows 7 32-bit and a few days ago I installed a windows update. When my computer restarted it entered the loading screen, but then the screen went black and after failing to load windows, gave me the option to start system repair. I did, and was subsequently able to run system restore, which took me back to before the update and my computer started normally again. I turned off automatic updating, but today when I restarted my pc the update installed again. Tried running startup repair, but there is no more option to enter system restore. When startup repair finishes, it says it can't automatically fix the problem. Upon entering advance restore options and selecting system restore, it indicates that the specified action could not be located and in any other instance says that system restore is offline.
View 2 Replies
View Related
Mar 8, 2011
I've recently been directed here from the Malware forum . I am having corrupted files which now are malware-free and I tried to do a upgrade reinstall to my system . However , at the final stage where my files are being transferred back, the updates fail and my windows is rolled back .Could someone please help me on how to solve this? I would like to reinstall windows 7 without losing my data .I am holding the Windows 7 Ultimate 32bit Upgrade CD which I've got from the Dell Upgrade program.I've uploaded the windows compatibility report ( it was the report i found on the desktop after the failed install)
View 14 Replies
View Related
Jan 12, 2012
Lastnight upon shut down, my laptop had updates to deal with so I went to sleep. I fired it up this morn and it did what ever it does with those updates... Since then I have nad no touch pad. I tried the Fn/F9 and that was not it... so I checked in control panel etc... Got to the screen where I check/uncheck "disable for external device" or similar wording... Couldn't check/uncheck as it was not highlighted/activated... windo in that box was blank not showing a device at all...
View 2 Replies
View Related
Sep 16, 2012
Since early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies
View Related
Sep 24, 2012
FYI: On last shut down of system on 9-24-2012(win7 ultimate) windows update installed KB2538243. When starting system back up several hours later, window's would not start. Started in safe mode, used system restore, all ok for now! Checked recent updates and found that the above update "failed to install" and was the only update listed.
View 3 Replies
View Related
Jun 29, 2011
I'm using Windows 7 64bit Professional and failed to update x64-based KB2552343. Reported error is Code 800B0100. I strictly followed the solution mentioned What is the System Update Readiness Tool? But nothing changed, still the same error.
View 2 Replies
View Related
Jan 26, 2012
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever. I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
View 9 Replies
View Related
Jan 26, 2012
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever.
I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having. I have searched google and NO solution helps me.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
View 9 Replies
View Related
Dec 15, 2012
Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.
View 3 Replies
View Related
Mar 14, 2012
I got a BSOD during a windows update (I think it was something related to .net 4).Since then when I start windows it gets to the loading bar with windows logo over it but then I get a black screen, same thing for safe mode. I have tried to repair with a win 7 installation disk but it fails, I tried to do a systeme restore after that but it failed too.I have access to an old working partition (which I cloned onto my SSD a couple month ago)
View 1 Replies
View Related
Sep 9, 2012
Over last week i had problem in my Windows7 to boot I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)despite my config :
Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go
View 9 Replies
View Related
Nov 13, 2011
I'll try to make sense of this to you. My computer has been working great until last night. Today, it bricked on me.Last night and until a out noon today, I was seeing occasional corruption of the image on screen (strange blocking/pixellation like a bad hd tv picture). I started getting locking-up freezes, which I could sort of unfreeze with ctrl-alt-del. This happened frequently while browsing the net las night (oddly games worked fine).Today at one point the whole image started flickering/fluctuating up and down and then the image scrambled totally and was locked-up, so I hard reset.Upon restart, bootup fails. Chkdsk, memory scan (from startup repAir and the installation disk), image and system recovery fail. When I read the detailed results from start up recovery, it tells me that no drive is present.So, did the drive fail, or maybe it came unplugged inside the tower (unlikely bc the tower hasnt moved). Or, did intel smart response technology screw up and the cache is screwed and it's messing up the primary drive it accelerates? Windows 7 64-bit OS on z68 mobo with 64gb SSd accelerating 500gb primary.
View 14 Replies
View Related
Jul 19, 2009
Recently I just tried starting my computer on and it wouldn't boot. I left my computer in locked mode then it eventually went to sleep. I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or keyboard weren't powering on though neither was my monitor showing anything I didn't hear any beeps. So I kept disconnecting the power outlet from the wall since that's the only way I could restart it.
View 9 Replies
View Related
Oct 10, 2011
So what happened was yesterday AVG detected a virus on my computer and asked if I wanted to get rid of it. I clicked remove or whatever it was and forgot about it. However, every 2-3 minutes it mentioned another virus needed removal on my computer. I ran a scan twice and said it was clean.
So I thought about trying to use a different antivirus program. I downloaded MSE and ran a scan. It detected some kind of trojan virus so I removed it and was glad thinking that this was the hidden problem. MSE told me to restart the computer to finish the clean up or whatnot, so I restarted the computer.
However, now when my computer is loading, I'll reach the first Windows 7 screen showing the symbol, then my computer will automatically restart. As if I clicked the reset button. I tried using the startup repair but it could not fix the problem. I also tried the restore windows at a earlier point, but the computer still faills to reach the desktop. I read somewhere that I should try to access the desktop in safemode, but the same "reset" problem occurs when I try to make it to safemode.
Please if anyone could help me fix this problem I would greatly appreciate it. I did not delete AVG so I had 2 antivirus programs (AVG and MSE), and someone told me that could be the problem and to delete 1 of the antivirus programs, but I cant even get to the desktop to do so. I have windows 7 64-bit. Prior to this, the computer was working fine. I was thinking of reformatting the computer but I rather not lose everything I have on the computer unless its the only option left.
View 4 Replies
View Related
Apr 8, 2011
Everytime I try to update my BIOS on my laptop I get this error: BIOS update failed!New Bios is not compatible with the current system BIOS. New BIOS part number doesn't match system BIOS part number. Error Code: -120See the for troubleshooting
View 5 Replies
View Related
Feb 16, 2012
I've installed Ubuntu 11.04 on my notebook ASUS U36SD. It worked perfectly fine for 4 months. Recently, I decided to install the last version of Ubuntu, 11.11. From now, Windows 7 doen't want to boot: It freezes at the boot screen. I tried to use the repair mode, but it failed. I also tried the safe mode. It still does't boot and freeze when loading CLASSPNP.SYS.
View 3 Replies
View Related
Jun 14, 2011
My friend has had this laptop for the past year or so, March 2010; and just recently her laptop decided to stop booting. Every time I try to boot windows it gives me a BSOD. All I have is the boot/repair disk from 2010; however it isn't working properly when I try to repair the OS or boot from the disk. It's a toshiba and it came with a repair program, but it also removes data on the HDD. Is there a link to a proper boot disk that I can maybe download to a flash drive and boot from there and repair? Or is there at least an easy way to pull the information off of her HDD before using the Toshiba program? Is it possible to just plug in the laptop to my computer, turn it on and access it from my personal computer? I also have an OEM version of Windows 7 from when I built my own computer, can I use that to repair her OS or will it recognize that it's not the same computer and fail? I know, lots of questions, you don't have to answer them in sequence, just tell me what would work best .
Note: She does NOT have a restore point on her laptop, I was able to get that far on my own before I decided to ask on this forum.
View 4 Replies
View Related
Feb 4, 2011
ive been using my Roccat Kone for like 1 month. Then the other day ive rebooted my computer, and it just stopped working. Ive been reinstalling the driver and so on but didnt help. I installed everything again, and when im gonna update the FirmWare, it says "Update Fails"
View 2 Replies
View Related
May 23, 2012
I have a Sony Vaio VGN-NW270F 15" laptop with Windows 7 (64 bit) Home Premium. 320 gb. Oh i'm also out of warranty.Computer always freezes at the point where it says "starting windows" and stays frozen. I even left it for alone for 24 hrs and it stayed on that screen.
Things I've tried:
1. I used safe mode to repair windows = just restarted in normal mode and froze at "windows is starting"
2. Used safe mode to restore to earlier point = could not to restore message
3. Created repair disc from another Vaio win 64 = froze at "windows is starting"
4. Used registry clean and malware bytes in safe mode = malware bytes found nothing & reg clean did nothing
5. Fresh install of windows 7 = windows bar loaded then froze at "windows is starting"
6. Reformatted hard drive & performed fresh install = windows bar loaded 7 froze at same point
7. Bought new Western digital 320 gb SATA Hard drive & tried install of win 7= same results
View 1 Replies
View Related
Feb 21, 2013
Ran FRST64.exe as found on the forum and need assistance creating the fixlist.txt file.
View 12 Replies
View Related
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode..what to do from Safe Mode to return my boot up back to normal?
View 2 Replies
View Related
Jun 18, 2012
I tried to boot in safe mode, it got stuck in mid boot. I tried to boot it with system repair, it said it was loading files and then it got stuck on a screen that said copyright Microsoft Corporation and had a green loading bar. My husband's laptop is exactly the same as mine, so I used it to create a system repair cd. I set the laptop up to boot from cd and tried it, but I got the same thing with it sticking on the green loading bar. I ran a diagnostics on my computer and everything passed except a hard drive test in which I got the error 2000-0146. I checked that error on the dell support website and it told me to take the hard drive out and plug it back in. I have not done this yet as the instructions to do so required me to disassemble the whole computer just to get at the hard drive. After some online research, I created a Knoppix (Linux based os) 6.7 boot cd and booted from the cd drive. This worked beautifully and I am now in the process of transferring all my important data from the hard drive to an external hard drive.
So here are my questions. Everything I read about error 2000-0146 says it's a hard drive failure but if that were the case, why does the hard drive seem to work fine when accessed from a Linux OS? Also, how would disconnecting and reconnecting the hard drive fix the problem? I really don't want to take it apart if I don't have too. Could the windows boot files somehow be corrupted causing it not to boot, and if so could I access them with Knoppix and replace them with good files
View 1 Replies
View Related
Jun 10, 2009
I have very recently installed Windows 7 7100 64bit with little success. I can use the M1330 for about 20 minutes and then bam..... the lappy will turn off and when I try to turn it back on I get nothing but a weird white screen. Not even the dell boot screen will appear.
When I first installed Windows 7 it found all drivers but due to this issue I have sought to change a few key drivers. Such as, the nVidia 8400 drivers and I have updated the SATA drivers to R154198
My specs are:
- 4 GB of RAM
- 2.4 CPU
- 200GB HD; 7200RPM
- nVidia 8400 Video card
I have heavily searched the net with no joy. please help.
View 9 Replies
View Related
Feb 11, 2012
i had an issue with a PC after trying to change the memory on an Windows Vista PC..however the PC was not booting up so i put back the original RAM and when i booted i got the Blue screen of death error. after booting into safe mode and running diagnostics on the PC i rebooted again but still same error. i then when into the BIOS and rebooted in failsafe mode. this then caused the PC to not boot up at all, and the HDD light is not blinking
View 2 Replies
View Related
Apr 29, 2012
basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
View 1 Replies
View Related
Sep 17, 2011
i just went out buy a brand new gaming computer. Take about 2 hours to hook the thing up and press the power button and expect the greatest, but to my dismay I receive the error "Interactive Login Process Initialization failed". I clicked OK and the box closed, the display (1920x1080) flashes and then the same error appears. I will eventually receive a blue screen then the computer will reboot. Startup Repair yields no results, so I was wondering what are my options. I am going to go back to micro-center tomorrow, but wanted to know if the internet had
View 9 Replies
View Related
Apr 30, 2011
My computer is a frankenstein, its got a bunch of different parts in it. My computer will not load windows. Every time I turn it on it automatically goes into system recovery. System recovery says it cannot find any problems (after it has already restarted itself 10 times). The first time this happened I did a system restore to an earlier point and it worked just fine. Two days later while I was at work windows did an automatic update, and the problem happened again. Unfortunately, this time the only restore point was the one the system created before it did the most recent update. So now I can't restore the system, the recovery tool isn't working. I've tried opening the bios and changing the boot order to boot by cd first and used the install disk, the same thing happens. I'm almost ready to buy a brand new hard drive and start from scratch.
View 2 Replies
View Related
Apr 14, 2012
that's what I think. When I start the pc, windows will boot to the splash screen, hang hang for a minute and then reboot. Just before it does, I can hear the hdd spinning down.Safe mode won't work, system restore won't work, loading last know configuration and system restore won't work.I think this happend after a windows update. After I tried "repair you computer" I got a number of errors, the first 2 are 6.1.7600.16385.
View 9 Replies
View Related
Jan 23, 2013
A few days ago, my computer stopped booting up. The splash screen for the mobo showed up, and then I would get a black screen w/ a white flashing cursor and nothing else. I put in my Win7 install disc to try to do a repair, and eventually figured out that if I change my boot sequence in the BIOS so that it goes to the DVD drive 1st and the boot hard drive last, it boots up just fine. I reset to the last recovery point, changed the BIOS back so it would boot from the hard drive 1st, and everything thing worked fine... until it installed the latest Win7 updates. After that, I had the exact same problems. So I changed the BIOS again as a temporary solution, and then I noticed that the computer wasn't sleeping properly. It used to turn off the display, the hard drives, the case fans, etc. Now, it turns off everything EXCEPT the case fans... which pretty much defeats the purpose of putting it in sleep mode.
View 12 Replies
View Related
