ive been using my Roccat Kone for like 1 month. Then the other day ive rebooted my computer, and it just stopped working. Ive been reinstalling the driver and so on but didnt help. I installed everything again, and when im gonna update the FirmWare, it says "Update Fails"
View 2 RepliesI havent got roccat kone drivers to work, anyone else had problem with mouse? Should i install first drivers then connect usb cable ?
View 9 Replies View RelatedEverytime I try to update my BIOS on my laptop I get this error: BIOS update failed!New Bios is not compatible with the current system BIOS. New BIOS part number doesn't match system BIOS part number. Error Code: -120See the for troubleshooting
View 5 Replies View RelatedI am running windows 7 32-bit and a few days ago I installed a windows update. When my computer restarted it entered the loading screen, but then the screen went black and after failing to load windows, gave me the option to start system repair. I did, and was subsequently able to run system restore, which took me back to before the update and my computer started normally again. I turned off automatic updating, but today when I restarted my pc the update installed again. Tried running startup repair, but there is no more option to enter system restore. When startup repair finishes, it says it can't automatically fix the problem. Upon entering advance restore options and selecting system restore, it indicates that the specified action could not be located and in any other instance says that system restore is offline.
View 2 Replies View RelatedI've recently been directed here from the Malware forum . I am having corrupted files which now are malware-free and I tried to do a upgrade reinstall to my system . However , at the final stage where my files are being transferred back, the updates fail and my windows is rolled back .Could someone please help me on how to solve this? I would like to reinstall windows 7 without losing my data .I am holding the Windows 7 Ultimate 32bit Upgrade CD which I've got from the Dell Upgrade program.I've uploaded the windows compatibility report ( it was the report i found on the desktop after the failed install)
View 14 Replies View RelatedLastnight upon shut down, my laptop had updates to deal with so I went to sleep. I fired it up this morn and it did what ever it does with those updates... Since then I have nad no touch pad. I tried the Fn/F9 and that was not it... so I checked in control panel etc... Got to the screen where I check/uncheck "disable for external device" or similar wording... Couldn't check/uncheck as it was not highlighted/activated... windo in that box was blank not showing a device at all...
View 2 Replies View RelatedFYI: On last shut down of system on 9-24-2012(win7 ultimate) windows update installed KB2538243. When starting system back up several hours later, window's would not start. Started in safe mode, used system restore, all ok for now! Checked recent updates and found that the above update "failed to install" and was the only update listed.
View 3 Replies View RelatedI'm using Windows 7 64bit Professional and failed to update x64-based KB2552343. Reported error is Code 800B0100. I strictly followed the solution mentioned What is the System Update Readiness Tool? But nothing changed, still the same error.
View 2 Replies View RelatedI am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever. I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
I am running Windows 7 64bit. I have 15 updates that continue to fail. YES, I KNOW THE IMAGE SHOWS "1" - that's because I wanted to see if could actually perform one SMALL update. They're just a bunch of Security Updates for MS Office programs. DO NOT tell me to download these updates manually. THAT IS NOT A SOLUTION to a problem that will continue on forever.
I clicked "Get help with this error" which brought me to the window's help as seen in the second half of the image. These errors have NOTHING to do with the problem I am having. I have searched google and NO solution helps me.
YES, I have disabled my antivirus program already and they still fail.
YES, I am logged in as the administrator and I have all the necessary privileges.
YES, I have used Windows' crappy troubleshooter.
YES, I used Window's crappy automatic "fixer" or whatever that junk is called.
About a week ago my computer was running EXTREMELY slowly and opening just about any program that was part of office was EXTREMELY laggy. I ran disk defrag, disk clean up, and I went through a bunch of services and start up programs that I didn't need and disabled them. This increased my computer's performance and MS Office no longer lags.
Ran Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.
View 3 Replies View RelatedI recently built a new rig and I had a problem with one stick of memory. The other stick worked alright, but I've been getting random failures. Can bad memory be inconsistent? Right now, I can't start my OS up at all. It goes straight to the Windows Repair Launcher, which fails. When it gets there, I can either find a restore point or let it 'attempt to fix' for as long as I can endure. The restore point option results in 'instruction xxx failed. memory reference xxx failed.'This leads me to believe there is a problem with the memory. But, could it be the motherboard? I played a video game for hours last night, as well as surfed the web and ran other applications. Everything was fine, until I shut down. This isn't the first time this happened. Last time, I 'fixed' it by switching the 'good' memory stick with the bad. The bad resulted in getting the OS up, but lots of BSOD's
View 7 Replies View RelatedSince early August all my Security updates have been failing. It adds time to each boot up period as it goes through the updates and then at the end will say it's failed and is reverting all the changes. I have already done some research on this issue and ran "sfc/scannow" as well as "chkdsk/f/r." Both seemed to go through with no problems. After that I did a Windows update and 12 updates seemed to go through with no problem until the required reboot where we're back to the same issue of failing and reverting.
View 9 Replies View RelatedI got a BSOD during a windows update (I think it was something related to .net 4).Since then when I start windows it gets to the loading bar with windows logo over it but then I get a black screen, same thing for safe mode. I have tried to repair with a win 7 installation disk but it fails, I tried to do a systeme restore after that but it failed too.I have access to an old working partition (which I cloned onto my SSD a couple month ago)
View 1 Replies View RelatedI restarted my windows 7 Compaq NX 7400 laptop yesterday after an automatic windows update and since that time I have been unable to reboot my laptop. I have tried all recovery/repair options on the windows installation disc but to date now have worked.The message shown is "Windows failed to start. A recent hardware or software change might be the cause". I having exhausted all the repair options and now worked, I opted to to do another installation on the same partition;after all files were copied and the machine rebooted I ran into the same problem; only this time the error was "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: File: windowssystem32winload.exe status:
View 9 Replies View Relatedi'm having problem when opening inbox from my ymail .this message come out "an add on for this website fail tO run.check the security setting in internet option for potential conflicts".
View 9 Replies View RelatedI've got a new BenQ G2420HD series LCD monitor and an HD enabled, windows seven ultimate, 64bit pc. However, when I connect my monitor to my PC using HDMI, my PC detects it (I've checked with a second monitor), it knows the name of it and can change the resolution etc. quite happily but no display shows on the monitor. The monitor just says 'no cables connected'. It works fine if I connect it with a DVI cable (haven't bothered trying VGA) but I want HD!
View 3 Replies View RelatedI just recently bought an Acer Aspire 5532 from a friend of mine. Everything was working fine for days, until I powered down using the power button rather than the shut down button on-screen. Ever since then, when I turn on the computer it reads "Windows failed to start. A recent hardware or software change might be the cause." I have the options to either 1. launch startup repair (which freezes the computer) or 2. Start windows normally (which takes me back to the start). I have no installation disk, I've tried safe mode (freezes) along with last good configuration?
View 2 Replies View RelatedI recently downloaded and installed a set of Windows Updates that came out on 4/26. I had about 8 of them. 4 of them installed successfully but 4 of them were downloaded and installed(on shutdown) but fail to configure on startup. The four I'm having issues with are:
KB2492386
KB2515325
KB2522422
KB982018
Each of these are updates for Windows 64-bit. I was wondering if anyone else was having issues with these as well. I plan on waiting a day or two and try again. I've tried twice today with no success.For future reference, what can cause an update to fail to configure?
Our laptop prompted a download and installation of SP1 Win7 and we pressed ok. The installation became stuck and warned do not shut down computer but it stayed in this state for over four hours. We had to "hard" boot the computer and on reboot it tried to install the new update. The system became stuck on " Fatal error C0000034 applying update operation 236 of 80331 (_000000...) " Then we started normally but the system identifies improper shutdown and runs system recovery (Lenovo) We choose "go to system recovery point" and after some time the system reboots and goes back to " Fatal error C0000034 applying update operation 236 of 80331 (_000000...).
View 3 Replies View RelatedI had a new external HDD WD My Book Essential USB 3.0 (2TB) 6 month ago. All was good until two days ago. I rebooted my computer and I won't boot up. After disconnecting WD HDD it work perfectly But after I turned my PC off, and tried to turn it on, again it won't boot up with the HDD connected AND some weird ticking noise started in HDD itself. I sounds like it's trying to boot but failing and trying again. So I disconnected, boot up the system and then plugged it in. Nothing Not in explorer, not in disk management not in Acronis program, nothing.I rebooted and it showed and Local Disk R, but I can't even start disk management or open it with explorer, or even open any program to be able to see/fix it. In the end, HDD wasn't even turning on.So the next day I called tech support of WD. They told me standard stuff, like "Disconnect, Reconnect Try another port, etc ". Nothing. By warranty they can replace it, BUT I don't care about the drive itself, I need data. In this case they can't help me. All they told me is to contact special company for that, and it's gonna cost me up to 1000$.After that call, I noticed a burning smell from HDD. It was connected to power and USB. I disconnected and I opened the case of my HDD. SATA HDD itself seams to be fine, but the connection board (with USB and power) burned.So, I connected directly via SATA to my PC. And that's when the fun starts: BIOS did not recognized it. I switched the SATA port. BIOS showed the model and everything but it gives me "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed." Reboot.In different software... NOTHING. Reboot again: and again "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed". Reboot. S.M.A.R.T. Command Failed... Reboot 5 times, all good. Started LiveBoot CD by Wondershare. It found my HDD and UNKNOWN. Was trying to recover data from it, program freeze. Reboot again. Was trying to fix mbr with Win 7 Boot Cd, nothing cuz it can't see were to fix mbr. Reboot. Started HDAT2. Nothing. Reboot 10 times, and HDAT2 finally can see my HDD. Before I start any test I shows me read error from UNKNOWN DEVICE. Started "hdat2 most powerful test". Nothing. No errors was found. O_o. Also I try Read MBR with the same HDAT2. Everything 0/0/0/0. So what else I can possibly try?? Oh yeah, when I connected my HDD via SATA, that "boot or not to boot" sound was still there.
View 5 Replies View RelatedYesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 1 Replies View RelatedMy laptop has been working fine for two or three months now, until today when I restarted it and suddenly could no longer use my USB mouse. Then I realized I had no WiFi signal, so I plugged into ethernet, and still had no internet connection. Most of my drivers seem to be broken, with my laptop functioning only as it would after freshly installing Windows, before actually installing any drivers.I managed to eventually find a way to install the WiFi drivers, and then the rest of the missing drivers, and restarted my computer to make sure everything was fine. The exact same thing happened again. Any idea what is wrong and how I can fix it without doing a fresh install? I don't currently have access to my backup drives so I'd lose a lot of stuff if I had to reinstall Windows.
View 2 Replies View RelatedI'll try to make sense of this to you. My computer has been working great until last night. Today, it bricked on me.Last night and until a out noon today, I was seeing occasional corruption of the image on screen (strange blocking/pixellation like a bad hd tv picture). I started getting locking-up freezes, which I could sort of unfreeze with ctrl-alt-del. This happened frequently while browsing the net las night (oddly games worked fine).Today at one point the whole image started flickering/fluctuating up and down and then the image scrambled totally and was locked-up, so I hard reset.Upon restart, bootup fails. Chkdsk, memory scan (from startup repAir and the installation disk), image and system recovery fail. When I read the detailed results from start up recovery, it tells me that no drive is present.So, did the drive fail, or maybe it came unplugged inside the tower (unlikely bc the tower hasnt moved). Or, did intel smart response technology screw up and the cache is screwed and it's messing up the primary drive it accelerates? Windows 7 64-bit OS on z68 mobo with 64gb SSd accelerating 500gb primary.
View 14 Replies View RelatedAfter reboot I get BSOD with 0x0000003B; 0xC0000000C0000005; 0xFFFFF8801893FA1; 0x0000000000000000; and TCPIP errors. Using system retore in safe mode has broken Net Framework 2 with error message unable to load sorttbls.nip or one of its dependancies. ATI Catalyst Control Centre and windows troubleshooter no longer work.
View 1 Replies View RelatedI'm working with an Acer 9920 Laptop, with win 7 u installed. Until quite recently everything worked well. But now I have problems. For instance I want to install some software by doubleclicking on the msi file I see in Windows Explorer. After entering Admin credentials I get a message that the file I'm just seeing in WE cannot be found.Similarly, when I want to edit extended system properties, C: Windows system 32systempropertiesadvanced.exe cannot be found.Something apparently related is that when I want to start Eclipse which is a Java app the system fails telling me that no client JVM at xxx can be found.When I log in as an admin everything seems to work right.
View 1 Replies View RelatedRecently I just tried starting my computer on and it wouldn't boot. I left my computer in locked mode then it eventually went to sleep. I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or keyboard weren't powering on though neither was my monitor showing anything I didn't hear any beeps. So I kept disconnecting the power outlet from the wall since that's the only way I could restart it.
View 9 Replies View RelatedYesterday i was listening music and my Windows Ultimate 32bit crashed, music started lagging. Then i restarted my computer and hes won't load the windows. Tryied do 3 times system restore but nothing helped. Tryied to install windows xp and then windows 7 again, but then i installed winXP i don't have internet connection, don't know why. then tryied install windows 7 but it's fails at middle of Completing installation progress then computer restart and i get hieroglif in the screen (picture above) and nothing happens. And then my computer is loading always in hieroglif. Maybe it's BIOS crashed?
View 3 Replies View RelatedFor some reason the network from point A to B keeps failing. Going to explain the set up I have right now. DSL and modem are in room 1 then that plugs into the wall to the switch in room 2. Many things are connected to the switch, roku player, dish network receiver and other Ethernet connections for other rooms and a router so we can get wifi. Now for some reason the connection from the switch to the modem keeps going out. The internet works just fine because i can plug the ethernet cable from the modem directly to a computer in the office. However from a computer in another room I cannot cmd ping the modem says 0%. What would cause this to fail, it works for hours then i have to unplug/re-plug the cables to get it working again.
View 9 Replies View RelatedI have a new desktop touchscreen, sony. It has windows home premium installed. However, in the course of trying customization of my new computer, I can't get FULL ADMINISTRATOR privileges. the only way I know is when I try to use my spybot search&destroy shredding program, it says I don't have administrator privileges. I have searched, retried settings, and just when I thought I had the settings right--- I get a message: "you need administrator privileges for access.
View 1 Replies View RelatedI tried Win 8 but had problems with Flight Simulator so returned to Win 7. Since doing a clean re-install of 7 I've had issues with programs failing to start for one reason or another. Live Mail for example will run fine for a few days and then suddenly will not run giving the message "the version of this file is not compatible with the version of windows you are running......etc"
View 4 Replies View Related