I tried to install windows7 to my computer. It didnt work. So we turn off the cd,rom.And now it doesnt do anything... like, when i try to turn it on there is no bios and nothing. I tried my computer with an otherscreen but nothing. Its just simple dark.And the turn on/off button of the internet and the screen is flashing..I have no idea what can be the porblem.
View 1 RepliesI've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedI have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedMy Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedWhat are the types of BIOS over years up to present BIOS types ? What make each BIOS unique and better then the previous ?
View 3 Replies View RelatedI start the computer ( equipped with Windows 7 Pro ) and try to access BIOS.I do this by pressing and holding the DEL key but Windows starts without accessing BIOS !Is there another way to do get BIOS setup ?
View 4 Replies View RelatedThis is an old HP PC I have recently upgraded from XP to Windows 7 and I have to say it has never run betterI have an ASUSTek A7N8X-LA motherboard with ver. 3.05 BIOS and an AMD Athlon™ 2600+ processorI want to upgrade to the latest BIOS that supports SSE2 instructions (for game playing purposes), however, I have run into a snag that the most recent BIOS ver 3.21 is still only XP compatible. Neither ASUS or HP are willing to provide any free support.This is somewhat frustrating as the BIOS in situ appears to be the original 2003 version. I could have easily updated this to the latest version before I upgraded the OS to Windows 7, but now it is to late.
View 1 Replies View Relatedi wanted to know i can update my win 7 and also my bios
View 7 Replies View Relatedwell I had windows XP, and I updated it on windows 7,during installation I did not formatted C disk. and installed win 7 on C disk. windows created (windows old) folder on c disk. The installation process ended succesfully. but the crach come after it. when i tried to turn on my computer, on screen, there appeared such massage: The bios could not installed, please press "g" . it seems i have no bios.
View 2 Replies View RelatedI know there are motherboards coming out now that include inbuilt software allowing you to modify your bios from within windows, but is there a way of doing this that isnt specific to the motherboard? Some universal method?
View 4 Replies View RelatedI am able to get into the BIOS with both USB and PS/2 devices (Keyboards, etc.) but one I boot into Windows I am completely unable to log on. Keyboard does not work, and neither does the mouse. They both light up, but I am unable to get other things to activate (caps lock key, etc.) and key presses do not work. This is with either USB keyboards and mice, PS/2 keyboards and mice, or a mix of the two (or all four attached at once!). Going into safe mode does not work -- once again, anything USB-based or PS/2-based ceases to function once windows boots, and therefore I am unable to log on in order to diagnose the issue.
I have re-set my BIOS to the default settings, and have removed anything which may provide my system with additional IRQ's -- including both serial ports and my LPT port (yes, this is an older machine). I have gone into the recovery console, and things *DO* work there, strangely enough. I do have mouse and keyboard support, but bringing the machine back to a previous state (system restore) does nothing to correct the issue. As well, the first few attempts provided me with an 0x800700B7 error message (very strange!) when the restore attempt failed. I got past this issue by choosing a restore point a few days in the past.
Once in the recovery console, I notice that it seems to be strangely deficient in tools that I would actually like to use. I am unable to bring up the MMC (and thereby the hardware devices applet), nor am I able to employ gpedit.msc in order to disable the login (boot straight into Windows). Essentially, it seems that my only tools are the command line, and about the only thing that I have found that can be launched from the command line - regedit. I am running a personal copy of Windows 7 Professional, with all of the latest updates and patches. I have MSE (the newer version) installed and have also installed malwarebytes anti-malware. Nothing found to date.
I'm building a new computer without a CD drive, because I realized I have no use for it. I know that you can install W7 from a USB into a PC with an existing OS, but obviously as I am building the computer, I will have to install the OS into the BIOS. I am getting a Biostar A880G+, but I'm not sure what BIOS it uses. Note: when I asked this question on Yahoo! Answers, many people thought that I was trying to update the BIOS with a USB, which is already a feature of the A880G+, but that's not what I am doing!
View 6 Replies View Relatedmy windows 7 machine is not going to bios
View 3 Replies View RelatedOk so I just finished my first gaming build and it all came together nicely, however I can't figure out how to download windows 7 pro 64-bit form BIOS?
And the windows disk is a copy so that might be the reason why I can't boot into windows idk for sure though any advice would be awesome!!
I just got a new mobo (Gigabyte 990FXA-UB3) and a new CPU (AMD FX-6100). Gigabyte has been telling everyone that in order to use these components together, one must update the BIOS with your old processor (for me, a Phenom II x4) for the new processor to work. I don't understand how you update the BIOS for one processor to work with another.
View 10 Replies View RelatedI have a Lenovo ThinkPad X60 laptop with Win7 32-bit Ultimate and an SSD (I know, I know, just go with it. I'm building a desktop soon). I could list the specs, but that's useless for this problem (I'd think).
At times (not always), when either resuming from hibernate or booting up from a shut down, the computer generally freezes at the point right after the BIOS screen. So it's just a black screen. This is before the window that says "starting up" (literally a window... the Windows logo). Whenever it freezes, it NEVER goes to the boot screen of Windows. I'm assuming this is an error with the hard drive, since the OS is on the SSD and the boot screen is from the mobo. However, this only started happening after a rather heavy fall to the ground that cracked many parts of the plastic shell on the computer. It still works occasionally when I can get it to boot up (nothing different when it boots up... same settings and everything. Spontaneous).
I have tried:
1) Cold reboot
2) Removing battery
3) Going off only battery
4) Unplugging EVERYTHING from the computer
I have not tried chkdsk yet. Is it necessary? Also, would there be a log somewhere of what happened? It never booted into Windows.
We just build a new system to play around with the Intel Rapid Matrix RAID
Asus P8P67 MB + 8GB RAM+ I5 2500K + 2xWD BLUE HD SATA 6 IN SATA 0 and SATA 1 ( SETUP AS RAID Mirror)We install the Window Ultimate 64 Bit in the RAID Drive .... No problem after all the drive install We also allocate 50GB for doing a image backup (Drive F) We restart the system and goto BIOS to set the HD from RAID to AHCI ( This is the situation happen when the BIOS reset)
Supprise me the system can boot form the Drive ...... (In Device Manager .... I see two WD 1TB HD instead of one 1TB RAID Drive) But when I use Disk Manager it takes really long time to run... I can't wait for that long and shut down) On My computer I only see one HD with 4 Partitation ...
I restart the system and Goto the BIOS to reset back to RAID...and it give error..
I but the W7 Ultimate Boot disk to repair but no success.. Try to load the Backup Image .... cannot find it...
From the old time .... if the BIOS reset it will set to IDE Mode ... Then I am'not able to login to window it will come up blue screen and I just reset to RAID it will fine.... But nowadays... the New MB set Default AS AHCI...then I encounter this issue.... Lucky ... we just testing the new system now..
If I have a cooperate customer want to setup a RAID drive and suddenly Power Cut Down.... BIOS reset..
I am having quite some trouble to install windows 7 on my new SSD drive. When I reboot without the old HDD the windows cd doesn't start up. So I tried to run the CD while under windows on the old HDD, which did work, but now I only have 8gig install on the SSD and its only a boot drive not a system one. Could it be that my motherboard is to old? I did have some issues to run the SSD alone, bios didn't recognise it quite often.
CPU - Core Duo E6500
Motherboard - Asus P5VD2-VM
RAM - 2 gig
old HDD - Samsung IDE 250 gig ( about 10y old )
new HDD - SSD Onyx 32gig + Samsung 1T both SATA
My computer crashed several months ago. I have 2 hard drives so I reinstalled windows 7 on my D drive. I also reverted back to an earlier version of the OS which corrected the problem on the C drive. How can I remove the OS from the D drive now that I don't need it. Whenever I boot up it asked me which OS I want to use. I actually reformatted the D drive but it is still asking me which OS I want to use. How do I correct this problem so it only sees the OS on the C drive. I couldnt find anything in the Bios to correct it. I have a Dell Inspiron 570.
View 3 Replies View RelatedAt my company I setup and deploy many windows 7 machines. I use a start-up batch file to do most of the work and a few other files in the start-up folder, this is all imaged to the hard drive with a hard drive duplicator. The batch file runs once and deletes it self. Anyways, that is the general idea of what is going on. the only thing left that I have to do manually is change the BIOS settings, USB enabled/disabled, behavior on power up, BIOS password, ect... Is there any way I could automate this process, preferably a command line?
View 4 Replies View RelatedWindows 7 ultimate 32 bit suddenly switched off, reboot does not show on screen which reads "HDMI CHECK SIGNAL CABLE". Using ATI HD4350 fanless with heatsink connected via HDMI lead. tried another monitor using white dvi cable monitor stays blank then shows power saving mode. So that eliminates the monitor & hdmi lead. Could a duff graphics card show this error? No on board graphics. Unable to get into bios no bleeps, Windows 7 dvd no good either, all fans come on and motherboard MSI X58 on board indicator light goes from amber to green when pc turn on so m/b must be ok.
View 7 Replies View RelatedIn the chaos of moving to a new house yesterday, a box my friend was moving ripped and a bottle of beer smashed onto my open and powered on laptop, scattering both liquid and glass everywhere. We immediately powered down and removed the battery, and placed the laptop upside down and mopped up the excess liquid from the outside as much as possible, and set it to dry upside down on a towel.My laptop is a Lenovo U330, I had my brother install Windows 7 on it for me last year, but he kept the disks so I don't have any of them.Several hours & some blowdrying later, we attempted to start up the laptop (I would have preferred to wait longer, but I needed to know if mine would work in case I needed to borrow my friend's for the week). The laptop will load the lenovo startup screen, and then flash the windows loadings screen (with the option to press f2 or f12) for a few seconds before recommending that I run startup repair. Which if I select it, will freeze after a few seconds. Usually my laptop's pretty noisy, but while the battery light flashes as if there is activity going on, there's no noise coming from it at all.
View 7 Replies View RelatedI updated my bios on my windows 7 computer. now its telling me i have one day to actvate windows 7. I try to actvate it online but it doesnt work. and the phone busy.
I have a full copy of windows 7 so it should actvate. this is very depressing 1 more day and i wont have a dvr, gaming system and computer. i wont even be able watch cable without ceton card working.
First off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first. I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
Sometime when i turn on the PC , all fans are running but nothing boot up no beep sound either. I have to push and hold on power butt to utrn it off then turn it on again couple time to get it to boot up but then it freez up in few min!I have try to boot in bios mode but get same problem it freez!!! when i try to do memories test it tell me i have hardware problem and again it ran memories test for 2 min then free
View 6 Replies View RelatedI plugged it into my pc, but I cannot see it either in Windows or in the BIOS. I want to run a diagnostic of it to see what is wrong with it, but since I can't access it I can't do anything with it.
View 1 Replies View RelatedI installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.
Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.
I want to say that this computer has the Windows 8 beta on it as its only OS. It's very clunky and full of bugs and whatnot and I want it off so I'm putting windows 7 on it and erasing everything on it. This shouldn't be a problem for these forums since everything I"m having problems with has nothing to do with the OS. Besides installing. now, basically this computers main parts are better than my own (it's not that great anyway) It's motherboard is x65 bit, it had 2 gb 800 mhz ram (my computer had the same amount but only 667mhz) it's processor is 3.00 GHz (mine is 2.3 GHz)So basically it's a better computer for the main parts. I've not looked at the PSU but I'm sure it's better aswell. The only thing that isn't better is the graphics card. It's a 7 series while mine is a 9. So, basically I want to put the best of my computer to this better one. Mine feels newer (since I keep it dusted so it sounds really smooth, while this one sounds a bit old. But either way I want to install windows on it. The only problem is that the BIOS is inoperable. When loading into the BIOS the keyboard no longer seems to work. Its light go off. But every once in a while on trying, I can get it into the boot menu so I can move it to put from CD rom. But at this point, no matter what, it won't let me scroll through the options.So naturally I went to google and came with some results that it could be the BIAS needing an update OR taking the CMOS battery out and allowing it to load default values. I tried the latter first, overnight actually. This brought it to default settings, but no luck. It didn't help the keyboard. Now, I'm on the "update BIAS" part. But I can't even seem to find the right update for this motherboard. I tried installing CPU-z but this Windows 8 needs framework to run the software since it's not made for W8. So I just look around on the MB myself and find the Model Number. It's D33C98. I googled it and mostly game up with Gigabyte results but I can't find BIOS updates for this model anywhere. I see manuels but I can't find much of anything for this MB.I thought about just putting the HD in my current computer and loading windows 7 on to it and putting back in the other one so I could just use my computers BIOS, but I've heard this isn't the best thing to do.
View 9 Replies View RelatedIt's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!
View 9 Replies View RelatedI am using Win 7 for a while (came pre-installed with laptop). Now it's time to have Win 7 (x64) installed on personal desktop as well.I just a have a specific question related to BIOS. Hope to avoid unnecessary delays/problems this way.
View 2 Replies View Related