why sometimes my hp laserjet 1100 sometimes shows as being installed on the devices and printers then when i shut down and restart my new windows 7 computer it does not recognise the printer straight away and i have to restart the computer several times before it does
View 6 Repliesfriend uninstalled windows xp from my pc and installed a version of windows 7.now my pc wont recognise my printer,scanner,or phone .i only gave it to him to do a general clean up of the pc,as i was happy with windows xp should i just get windows 7 uninstalled and put xp back on?.i have the xp installation disk.if i put the installation disk into pc the installation wizard offers an option to save data from "old" computer.will i be able to use this option to save my photos,favorites etc?
View 9 Replies View RelatedI have been running Windows 7 on my pc for 3 months with great satisfaction (I upgraded/clean installed from Vista). However, tonight my pc wouldn't recognise any USB hardware (some of which I can only assume are internal, as my keyboard and mouse are PS2). Having looked online for possible fixes, it seems that running an upgrade from my installation disk would resolve the matter.My pc is stuck on the 'Starting Windows' page and won't proceed any further. I have rebooted - but although the bios page and boot setup page can have the cursor moved by the arrow keys, hitting the 'enter' key then freezes those pages. I have tried to select 'Windows 7' as the operating system rather than 'Starting Windows' but this also freezes the pc.I now have what seems to be a rather large paper weight with a fan inside it on my desk...can anyone offer a solution around this issue?
View 4 Replies View RelatedI'd like to have the Software for the settings of my keyboard & mouse under Windows 7 - The Keyboard & Mouse Center under Windows 7 don't Recognise this hardware.
View 1 Replies View RelatedI have two large USB (1Tb and 2 Tb) external drives running on my Windows 7 Ultimate 64 bts. But when I get my old 40 Gb ext hdd or my mate's similar unit but 60 Gb (both are generic) I can't see them. Yet if I plug them on my XP laptop, or Window 7 starter notebook they install automatically with no problem! I can see my own device in Management but it requires to initial...and it won't, as for my mate's nothing at all happens when I plug it on the usb port, but the unit's green light is on!.
View 4 Replies View RelatedI don't have much knowledge in these things so I have to rely on what people tell me so I hope I am not wasting your time.I have a Sony VPCZ21 with an embedded fingerprint reader. I want to use my preferred encryption software DigitalPersona 4.1 (sadly they don't update this anymore) and under devices is listed Touchstrip Fingerprint Sensor (WBF Advanced Mode).I am told the problem is that I am not using W7Home and that W7Professional doesn't recognise the software and so I should change my operating system to W7Home. Before undertaking such a task I would be grateful if you would confirm that I am not being told nonsense and that this would be a sensible thing to do.I have already removed the original encryption software and have the latest driver uploaded.The DigitalPersonal software works perfectly with an external fingerprint reader but not with the embedded one.
View 1 Replies View RelatedWhen i plug my WD passport portable hard drive into my computer, the hd will start up (the little LED will eliminate) and windows will make the "usb connection" sound and down the bottom right of the screen i have the option to safely remove my passport 0740. So windows picks up my hd but it just wont show up in my computer, it works on my other computer just not this one. i have tried changing the drive letters and that doesnt seem to help. Any ideas? using windows 7 ultimate
View 1 Replies View Relatedafter trying everything to get my old computer to work I eventually gave up and dusted off my wallet and bought a new one, I bought a new Lenova i3, with win7 64bt, my old computer was win7 32bt, all my important files were on the old hdd so I removed that and put it into an external case, but when I plugged it into the new comp it says drive not formatted do you want to format, which I obviously dont, I then tried my other external hdds and they are all the same, I know there are recovery programs that will recover the data, but I am reluctant to use these as there are a lot of home movies of my family on these drives and everytime I have used a recovery program before, the recovered video files will no longer play is there a way around this
View 2 Replies View RelatedI've been using this USB since February, and it's only today I've come across this problem. I tried it on the computers in the local library, my laptop and another home desktop with no luck at all.I have a lot of work on there. There is no brand for the USB as I was given it by a medicine company (my father is a doctor so he receives free items from these companies from time to time).
View 9 Replies View RelatedI am currently running Windows XP 32-bit with 3GB of RAM installed 2x 1GB + 2x 512MB.
I am thinking of buying another 2x 1GB sticks of RAM to bring my total RAM up to 4GB. As Windows XP only recognizes 3-3.5GB of RAM will Windows 7 32-bit recognize and utilize the full 4GB? So basically is it worth getting an extra 1GB of RAM for Windows 7?
I recently purchased a usb 3.0 enclosure from silverstone model ts07b and a new 2 tb drive from seagate model ST2000DM001; the usb 3.0 card is from syba model SD-PEX20093. The problem I am having is that when I plug the enclosure into the usb 3.0 slot with the seagate hdd the computer does not recognize it, but when I plug in another 2tb drive from WD (caviar green wd20ears) the computer recognizes it. I know the seagate is not dead because when I plug the enclosure into a usb 2.0 slot the computer recognizes it. Now I need to know what I should replace, should I get a new enclosure or pci card?
View 1 Replies View RelatedI am using a SAMSUNG NP-S3510-A03 laptop. The problems I have had with this laptop are unreal, I wouldn't recommend anyone to buy itAnyway, my current problem is that the laptop will not read my external HD that it was previsouly reading fine before.I recently got a whole bunch of important files on the external HD to transfer to the laptop. While it was transferring the files, the transfer window crashed. I ended the task and went to try again but the external HD would no longer show up in My Computer. I tried restarting, no joy. I then tried plugging the external HD into all 3 USB ports, still no joy.It won't even show up in Disk Management.
When I plug the external HD in, the light comes on so seems to be working fine. But I get no noise in Windows to say the device has been connected, no autorun, nothing.I really need the files that are on it ASAP and cannot get the files from the original source anymore. I have not tried it on anyone elses PC/laptop yet and won't be able to for some time.
I'm running a Dell inspiron 580, and a Dell ST 2310 analog monitor with 1920 x1080 resolution (recommended). The TV is a LG 37LD450. I had no trouble with it as I watched movies from the PC to TV for over 2 months. When connecting to an external display both the PC and TV would prompt me to choose either one. But now all that it shows is the PC monitor and no TV.
View 1 Replies View RelatedI have a problem which I can't seem to fix. I have 2 laptops, both dvd drives are not working. I have an external Usb drive that won't work under boot up. Laptops don't recognise it until drivers are loaded.Hp pavilion dv6500 won't boot. Mbr is damaged. Can't use repair disk as won't recognize Usb drive.So I put hdd into my other laptops 2nd hdd port " Hp pavilion Dv9800 and repaired boot sector that way. Tested it on dv9800 and boots fine.Put hdd back into dv6500 and get same mbr fail message.
View 2 Replies View Relatedi am not saving this code in .bat format i'm saving it in .txt format still my antivirus bitdefender recognizing that it is a virus. saying that it is behaving like BAT.gen virus. How is it possible? How antivirus is recognizing the highlevel language in txt format? please explain me deeply, so then i can modify my code.
View 5 Replies View Relatedhp g42 laptop cannot recognise Transcend 8GB Pen drive
View 1 Replies View RelatedMedia Player12 is not working properly. All drivers are up to date and windows says all should be working. Have 32 bit Dell Home Premium desktop. Seems the E drive is unable to read any disc I put in. I get pop-up saying insert media. I have tried store bought CDS and DVDS and still won't play them! It will Only Play the songs showing in the library. Seems it's unable to READ THE DISC!!!! Also tried to burn and tried different types of CD-ROM blank discs and won't burn either.Also tried the Microsoft FIX IT. ybe something with setting but unsure, as all worked fine till other day had the Motherboard and Main power source replaced.
View 2 Replies View Relatedmy brother used a mac lap top and i think he formated it to beable to copy movies to my terabite. it now does not recognise it on computer ore dvd which it did before
View 1 Replies View RelatedI have recently been bereft of the ability to write to standard CD/DVD drive or BluRay drive with any type of blank disc. I always use windows drag-and-drop. All automatic updates are installed.Every system tool test or troubleshooter says that the two devices are working properly.They can play pre-recorded material but I simply cannot get them to recognise blank media.
View 4 Replies View RelatedI have a generic mp3 player which charges from my laptop, but the laptop doesn't recognise it as a mass storage device! A local phone shop (Cambodia) told me they use software from (url)... to download music to phones and mp3 players, but I can find it on the net!
View 6 Replies View Relatedmy AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
View 1 Replies View Relatedhaving moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies View RelatedI bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies View Relateddownload in my computer hp laserjet driver P1007
View 1 Replies View RelatedWhy did my computer stop recognizing my printer. I cannot find my printer desk.
View 2 Replies View RelatedI use Windows 7 Professional 64 bit. My problem is: Whenever I try to print something (word, pdf, or any other file); printer spooler stops working and when I check the Devices and Printers all the printer drivers seem to be disappeared. I checked the Print Spooler" in the Services tool; and set the "Recovery after subsequent failures" option to Restart the Serviceā. Therefore all the printer drives coma back after 1 minute. However the spooler stops immediately again when the uncompleted printing job starts; hence I can not print anything more than a page. Earlier in this forum, someone posted that Microsoft issued a hotfix for this problem ( hotfix 2388142) which can be downloaded from article: [URL]. I downloaded this hotfix and tried to install, however it gives an error message of: The update is not applicable to your computer and quits installation. I did uninstall and reinstall all the printer drives, but this did not help either.
View 1 Replies View RelatedI have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies View Relatedi want to download software and driver for hp laser jet p1007 . I am unable to use my printer.
View 1 Replies View RelatedWindows 7 recognizes the printer but has a yellow triangle exclamation point. it will not print, but I cannot find any printer driver for Windows 7. any ideas?
Answer:-
Are yere any more details on what is the matter with the printer in device manager?
You should be able to download the Windows Vista drivers for that printer from here, which should be compatible with Windows 7:
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:549:0:0
I downloaded Printers' drivers, one for HP and the other for Epson by accessing their web-sites.Both are USB-connection and working fine, however icons of both printers on, ... Start > Device and Printers,.... there are no printers' icons, even though other devices, such as thumb-drive, monitor, keyboard and others.Just wonder why icons of both printers are missing on 'Device and Printer?'
View 1 Replies View RelatedI have an MX850 and an MX870 printer both connected to my LAN.I also use an application called CD Label Print. When I started that program I noticed that there were 3 MX850 printers listed, the original and a (Copy 1) and (Copy 2).So I went to devices and printers and saw there was a MX850 and a MX850 (Copy 2). No (Copy 1). So I removed the (Copy 2) printer and fax.I went back to CD Label print and saw that it still said MX850 and MX850 (Copy 1). Went back to devices and printers and sure enough, MX850 was gone and MX850 (Copy 1) was present. So I pressed F5. It changed to MX850. Press F5 again, it changed back to MX850 (Copy 1).It changes non-stop. It alternates betweem the two settings every time I press F5.I've tried uninstall re-install. I've also contacted Canon support who are dumbfounded. I also had to manually remove the registry entries and start menu entries because the canon uninstaller doesn't so it.I cannot use CD Label print. Each time I try to print a label it insists on asking where to save the file, rather than printing it.
View 1 Replies View Related