I have recently tried to boot Windows 7 Ultimate on my machine but while trying to boot it, it gives me an error Saying. Boot error Code : 5. I have no idea why this happens? could somebody explain to me, and what information about my system would i have to provide so that you may know the reason.
View 5 RepliesI cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedIt's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
View 9 Replies View RelatedI have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies View RelatedI upgraded to Win 7 Ultimate from Win XP Pro after my OEM disk picked up a few more scratches than it needed.During a re-installation it partially installed the windows XP setup with an error message of 'HAL.DLL' missing.I believe the residual setup loader is causing problemS.My PC insists on trying to boot from CD/DVD regardless of what I select.If I select boot from CD/DVD with my new Windows 7 disk I get the SAME message as if I didn't select boot from DC/DVD: Windows failed to start. This could be from a recent hardware or software change.
1.Please insert your windows install disk and click restart
2.Change language setting and click next.
3.Click repair... etc.
If you don't have the disk contact admin....ect.
File$LDR$
Status 0xc000000f
info: Selected entry not added/ application is missing or corrupt.
Enter Escape.
Escape = reboot to error listed above...
Enter = OS choice menu with:
1. 'windows 7'
2 'older verion of windows'
I select the ' older version' and the system gives me the same listed above error...I select 'windows 7' and, well.... here I am, posting this thread from my PC, Windows 7, updated, gageted and all running smoothly...Hibernate sometimes boots and sometimes shows the same error.....Start menu 'Shut down' and 'Restart' also don't work on the odd occasion....I researched and downloaded EasyBCD to delete the 'older version of windows' but it appears to have only 'deleted' it from Windows 7's 'eyes' because ultimately the thing is still showing on my OS choice menu and is evidently causing a few hiccups.
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
Recently got some new Dell XPS 13 laptops. They're great, minus the absence of a NIC for easy network booting. After many different attempts to get the thing booting an ISO image burned to a bootable USB drive, I went out and bought an external USB CD drive. I performed the following steps to transform one of my .wim images for 64-bit Windows 7 Enterprise into an ISO: How to Convert a WIM File to an ISO File | eHow.com, I can begin booting from the CD. However, when it gets just past the "Windows is loading files" screen (I don't get to any part of the initial Windows 7 setup), I get the good old "Windows failed to start" message: Windows failed to start. A Recent hardware or software change might be the cause.
View 2 Replies View RelatedI did the stuff that is listed below, but first, my issue and a yes or no question: If I boot windows, without the Linux CD in, it shows me the "Windows Error Recovery" if I hit start windows normally, it starts loading the windows 7 screen, half way through the Windows Logo, it freezes, then brings me back to the windows error recovery, so I tried "Launch startup repair" it then brought me to a "Windows boot manager" and says 1. Insert your windows installation disc and restart, 2 choose your language settings and then click "next" 3 click repair computer.
View 5 Replies View RelatedThis error keeps popping up and I can not get into windows.Runtime error program: C\windows\system32\nvvsvc.exe.This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.I have tried using a boot disk system recovery from a command promp, also I can not get into safe mode. I have tried system restore from the boot disk with no luck I dont know what else to do! My computer is a HP pavilion HPE AMD fx-6100 6 core processor with 10 gigs with nvidia geforce gts520.
View 2 Replies View RelatedCritical updates were installed for my Windows 7 Ultimate 32-bit desktop yesterday, today I put the computer on and just after the Windows loading screen I receive a Bluescreen for a millisecond before computer immediately restarts. I am them prompted to do a repair when computer restarts which after many minutes brings up the error message 0x80070002. The computer is a self build and has been fine for 3 years but this appears to be a major problem. I cannot afford to lose my files (most are backed up but not all since I only back up every month to an external drive). From the repair screen, I have tried to restore the computer before critical updates were installed (what I feel is causing the problem) but the restore point fails. I cannot enter the desktop and now the startup repair simply hangs.
View 1 Replies View RelatedI am trying to fix a laptop and keep running into problems. Originally the message was BOOTMGR not found and to restart. So I put in the Windows 7 disk to try a repair...and it didn't find an OS to select in the list. I ran a bunch of stuff and finally got an OS to show up but windows still would not start stating winload was missing or corrupt. This time when I went into the repair utility it found the OS and I ran the automated fix...but that didn't resolve the issue. So I tried bootrec /fixmbr and /fixboot. At first fixboot stated that it could not run. So I saw something around to make the manufacturer partition inactive and to run the command...did that and fixboot ran. However, now it does not find the OS again and I'm back to the BOOTMGR missing. Not even sure where to go now or try doing.
View 4 Replies View Relatedi had a installation of windows 7 64bit until I changed the pc name to monster-pc and installed a update, which somehow corupeted the regestery after doing 10+ start-up repairs (all failing) i decided to get a spare HDD and use xp on it, and try to fix the regestery files, which didn't work and now it has no BCD and says Noosinstalled when i use start-up repair & nothing i do works (I have all my gaming data on this windows 7 hard disk
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8175 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 114470 MB, Free - 65830 MB; D: Total - 76832 MB, Free - 44153 MB; E: Total - 400003 MB, Free - 399901 MB;
Motherboard: Gigabyte Technology Co., Ltd., P67A-D3-B3
Antivirus: Microsoft Security Essentials, Updated and Enabled
This weekend, I bought and installed a new SSD into my computer. I re-installed my Windows 7 (Home Premium x64 OEM) onto it, (fresh install, no migrate) and immediately formatted my mechanical HDD. I went into my BIOS and changed boot priority. (I set it to CD first, because I was re-installing from the disc, followed by my SSD.) I changed BIOS Drive positions, with my SSD as #1 and HDD as #2. On my Mobo, my SSD is plugged into SATA3 Port #1. My HDD is plugged into SATA2 Port #1. As soon as I got Windows installed, I started re-installing programs, setting up my admin account, and generally resetting my system, theme, Rainmeter, etc. Then I started getting messages that I wasn�t running Genuine Windows. I clicked the �Resolve Online� button, and downloaded the authenticator software, which told me I needed to buy a copy of Windows.This irritated me, because I am running a key I bought legitimately, and I have the packaging and CoA. I called Tech Support. I spoke with a very helpful gentleman. He checked out my product key. He had me activate my product, which I hadn�t done on my new install yet, and I got a �Genuine� tag to appear under the Windows Experience Rating in �My Computer>Properties�. He said I was good to go. Now, 48hrs later, I�m getting the "Not Genuine" message again. I have a screenshot of Windows claiming to be Genuine and Not Genuine at the same time. (See Attached photo.) I have installed a lot of updates since my re-install, so I do seem to be getting those. So, although I formatted the original Mechanical HDD, I have to assume there are some residual Windows files still on it, (but I'm not finding any) because apparently Windows thinks it�s running on two machines now, I assume. I�m also getting a strange message in my Boot process, which asks me if I want to Boot into Windows 7, or into Windows 7. A 30sec timer then appears and chooses the highlighted option, and continues to boot normally. This computer is custom built, and I purchased an OEM version of windows separately from the builder - legit, physical packaging - and I opened the packaging and installed it myself about a year ago. It has been fine until I installed the new drive this weekend.
I turned on my Sony vaio laptop and it got stuck on the Starting Windows splash screen. I tried to boot in safe mode but it loaded a bunch of files and then just stopped and never went to safe mode. I tried the system repair but after nearly 14 hours that didn't work either. System restore, scannow and chk dsk didn't work as well. Now I'm trying to reinstall Windows but it says disk read error and it won't load any further.
View 7 Replies View RelatedWhen it tries to load it gives me this error:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert your Windows installation disc and restart your computer.2. Choose your langiage settings, and then click "Next."3. Click "Repair your computer".If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc0000225Info: The boot selection failed because a required device is inaccessible.And I can press enter to continue or esc to exit (in both cases the computer restarts)When I insert my windows installation disc and choose "repair my computer" it says its looking for windows installation but it keeps looking forever.
View 5 Replies View RelatedStarting Windows 7 Home 64 bit by hitting the F12 key I get the Windows Boot Manager screen. And it shows the following error message:The Windows Boot Configuration Data (BCD) store file contains some invalid informationI would like to copy a clean slate of the OS to another HDD so i may as well fix the existing one first.
View 2 Replies View RelatedI have an Acer Aspire M5100 Desktop that was running Vista 32 bit. I tried to upgrade to Windows 7 and am now stuck. I think it is either a problem with BIOS or with an incompatible graphics driver. After the upgrade process (I did not do a clean install), when the computer rebooted for the last time, the screen went black and it it did not advance past a certain point. The error message read, cannot boot from CD.
Since then, when I turn on my computer, the screen goes to black. That's it. If I push delete, I can access BIOS. Even when the boot priority is the CD Rom, nothing happens. I cannot access a GUI to make changes to drivers, etc. With all of the known incompatibilities this computer has with Windows 7, it probably would be best to return to Vista. Ideally, without a clean install because of all the software and files on the computer. But I understand a clean install might be necessary.
How do I use my Vista recovery CD when there is no GUI accessible? Can I do this through the BIOS menu? I am not good with command prompt coding, so if that is mandatory. Unfortunately, I do not know the exact computer specs, again because there is no GUI. The best I can do is this Acer website: Acer Support: Aspire M5100 Specifications.
I tried starting my computer today, but it kept coming up with a screen that said: Error 0xc0000225 Boot selection failed because the required device was inaccessable"I tried googling it, but the problem seems to come frop people messing with partitions.I haven't so much as looked at a partitioner siince I got the computer (Just the two standard partitions: the system one and the C: drive)
View 8 Replies View RelatedI just bought a new Windows 7 DVD; I insert the disc and waited until "Press any key to boot from CD". It took really long time and then it gave an error "Memory overflow error". My windows vista disc is working normally but windows 7 gives error.
View 9 Replies View RelatedI am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
I installed my sandisk pulse ssd 256gb sata iii on my sata ii moo via pcie sata iii card. every now and then I get the boot disk error messages - CTRL-AL-DEL to restart . I set it as my primary disk boot and disabled the wd blue from appearing on bios hasrd disk selection (which also has os installed)
I know I don't get sata iii speed on my mobo but am more worried about boot disk error messages.
any fix for this? should I reinstall my win 7 ultimate 64 bit upgrade on the ssd and start afresh? at the same time save all data to external hdd and wipe the OS clean off the wd 500gb - then copy all music and sundry back to the wd blue?
I plan to get windows 8 asap while the upgrade version is on offer till end of January 2013.
after my hardware plan works will a clean install of windows 8 pro upgrade wipe my ssd clean fixing the problem?
When I go to create the new partition in Windows 7 that I want to install XP on it creates it as a logical drive. How do I create a primary partition instead?
View 8 Replies View Relatedi have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i shut down before i waiting the opening screen of windows. and when this error comes it says1) continue bla bla2) do system restorewhen i select system restore it gave an another error like "cannot access required driver".
View 1 Replies View Related[URL]i have bought a new rig 2 days ago...
i5 2500k
forsa geforce 430 2gb
2x2 gb kingston ddr3
intel dh67cl
i have had the exact same problem as OwlMan.. For the 1st day everything ran just fine... But on the 2nd day....
I was playing fifa 11 and had minimised it to check the time when this happened..
I don't know if this happened to owlman but the system does not seem to have the graphics drivers installed after the incident , and every time i try to install the drivers , at first everything goes fine but during reboot , at the time when you can see the cursor but the rest of the screen is black , the computer reboots again...
Also , during the countless reboots, i once mistakenly left the nvidia driver cd in the optical drive....when the boot screen passed the windows logo, the red lines reappeared and the system rebooted again .
How do you get msconfig from dos with a boot.ini missing error. Normal Windows 7 / safe mode seems not to be the answer.
View 3 Replies View RelatedOrdered recovery cds from acer. Had to delete 100 mb partition to make it work. Said recovery successful except when computer re-booted. Error msg came up: "An error occured while attempting to read the boot configuration data."File BootBCD Status: Oxc0000225.It also said to fix problem insert my windows install disk.Choose your language settings and click next.Click "Repair your computer".I dont have windows install disks. There are none on internet to download. I thought system recovery installed all this. Can someone help to get this booted up and running.
View 1 Replies View RelatedI don't know much about computers. I don't understand anything about BIOS and OS, without going into the comlicated things?
View 3 Replies View RelatedI've been trying to install Windows 7 Pro upgrade as dual boot with XP Home, and keep getting the message (something like) "Disk read error - press ctr-alt-del to restart" at the first boot during the installation processHave checked the hard drive for errors, and there are none. Have replaced the hard drive with a brand new one, and get the same result.[I also tried installing Windows 7 Home Premium upgrade, and get the same result.] [code]
View 4 Replies View Related