I am using Foxpro 2.6a application files they work perfectly on all 32 bit systems XP Vista Windows 7 and the screen displays work fine in the program and display correctly. When I use Windows Virtual PC hosting Windows XP the Foxpro screen Data runs off the page now missing 3 rows of data.I have complete control over the Desktop resolution but that does not help, windowed mode or full screen does not help.
View 5 Repliesi have v-box running on win 7 in the vbox i have win xp i have it set on bridge connection i can ping the windows 7 side just fine but i can't ping 8.8.8.8 google and have no internet connection the internet on the host is fine?
the router gateway address is 192.168.178.1
the windows host has a static ip of 192.168.178.107
the xp in the v-box can not connect with dhcp so i have it set manual
to ip 192.268.178.107
subnet 255.255.255.0
default gateway 192.168.178.1
dns 1 : 192.168.178.1
dns 2 : 8.8.8.8
it is bridged with a wireless network
guest additions are installed
I have an XP virtual machine running on a 64-bit Win 7 host. I have a home wireless network that I need to access from the XP VM in order to use printers attached to the other computers on the network. All computers currently on the network have the same workgroup name. I have networking on the VM set to use the wireless adapter on the host laptop. With this configuration I can see and access the host, but I cannot see nor access any other computers on the network.
Now, it seems to me that I will need to run the XP Network Wizard to set up the network on the VM before I am able to see the network, but after reading dozens of articles and posts on networking a VM, I have never seen this step mentioned. (I am at work now, so I can't test this out on my network until later.) So, my questions are:
(1) Do I need to run the XP Network wizard to get the VM to join the wireless network, and
(2) if I don't need to run the wizard, what DO I need to do to get this to work?
I have done as you instructed. The WinXP VPC I set up can see the internet but for some reason it does not see the host Windows 7 machine. When I ping the host from the VPC I get no response. I can ping the VPC from the host machine. I intend to run the ArcInfo license of ArcGIS Desktop on the VPC. That license requires communication with a license server. The license server is running on my host machine. If I can't ping the host then I won't be able to use the license server.
I have done this on another machine with WinXP as both the host machine and the VPC and the VPC can see the host via ping.
I've turned off all the firewalls but no joy.
I have three virtual OS (windows 2003)installed on my server (window 2008), I can ping it from within the network but I cannot reach it from outside the network. However, I can reach the host and any other physical pc from outside the network.
I also installed VMware 5.0 on my laptop running window 7. Windows XP is on the VW. it can ping the host but the host cannot ping it. I have set it to bridge but it is still not the host cannot still ping the OS on the VM.
I've taken on a migration project for an SMB. They have an ancient application that they use and cannot find a replacement for.
The problem is that the application writes to the root of C: when creating mail merge documents, while this wasn't an issue on XP with the correct permissions its a problem with 7 due to UAC not letting standard users write to that location.
The software vendors have come back with the standard answer "turn UAC off" ... nope .. not prepared to do that.
I've managed to get a copy of the application so I could do some experimenting with Virtual XP mode. While this allows the application to run and create the mail merges correctly it seems to require the creation and setup of a VM every time a new users logs on.
Is there anyway to share a single VM between multiple users or could it be done by assigning published applications to all users on the host?
I'm running windows 7 ultimate and i haven't run XP mode in a while so i'm not sure if it was an update or what that caused this. but the crashes that i'm referencing happened on 4/27/2012
View 7 Replies View RelatedI desperately need to get Virtual XP on Windows Professional. Mine is MSI board, 64 bit, 8GB RAM. How to go about this?
View 7 Replies View RelatedI upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies View RelatedHow to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies View RelatedHow to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies View RelatedHow to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies View RelatedHow to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies View RelatedGot a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
I am trying to set up a VPN on my Desktop computer (HOST) so that I can connect to it from my school with my laptop (CLIENT). At one point it was working, but now every time I try to connect I get "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection."I know the issue is NOT my laptop, because I can connect to another VPN that I currently have running in place of the one at home (One obvious reason I'd like the home VPN is that my current one is in Sweden...)I also have little reason to believe that my network settings are wrong, because I have the Host computer set as DMZ on my Linksys WRT160N Router and have forwarded the PPTP Port to it as well (Just in case.)I've gone as far as reformatting my Desktop computer and doing NOTHING but installing Network Adapter drivers and an antivirus, and then setting up the VPN and it STILL doesn't work...
View 2 Replies View RelatedI need something that can host a VPN server on Windows 7. Not LogMeIn Hamachi or the one hidden in Windows' network connections, neither of those work. I'm looking for a free program.
View 7 Replies View Relatedim running win7 64bit and have noticed that host process for windows services is sucking up 30mbs upload and 30 mbs download per day . i have checked and my system is clean . i just wondered if there was anything i can do to stop them using so much data . in just 3 months its used over a 1 gig which is to much.
View 5 Replies View RelatedFirst some info: Windows 7 Professional x64, Intel x58 Chipset So, looking in my device manager I've noticed that a lot of the stuff are not updated.i.e.: [URL] The date is still June 2006 According to DriverEasy they need to be updated: [URL] Other devices include the devices like these: [URL]First I tried to do the automatic update through device manager, but Windows insists that these are up to date.So then I went here: Intel� Driver Update Utility Ran the auto detection and installed everything it says I needed. These are still not updated.Then I grabbed the download via DriverEasy, and placed the Windows 7 version of these in a folder, then pointed to them. Update still say the current drivers are up to date.
View 4 Replies View RelatedI have Windows 7 32 bit on my laptop and Windows 7 64 bit on the desktop, both Home Premium. Every time I go online with the desktop it starts a download according to NetLimiter. The download appears as Host process for Windows services and it expands to process 720 and then to 92.122.126.243:80. I use 3G mobile broadband for my net access and this download could use a considerable amount of my Gb allowance. Using NetLimiter I can kill the download but I would like to know what is happening and do I need the download? Some idea of the d/l size would be handy as well. None of this happens when I log on using the laptop.
View 1 Replies View RelatedI recently re-formatted my hard drive, and noticed an icon in the task bar called "windows host process (Rundll32)". I looked it up and it said it could be malicious. I'm not sure if it is or not, but I ran Malwarebytes and nothing came up.
View 14 Replies View Relatedi have a computer that was running fine for a year or so, but now its been a couple of days and after an hour or two of use, it slows down and finally freezes. I dont know what it is. The clues i have include:
-ive run memtest86, no errors.
-ive scanned the whole system with 4 different virus programs, so not a virus.
-but ive noticed that rundll32.exe has been using ALOT and i mean ALOT of resources. After a couple hours, norton tells me that it has high disk and cpu usage. i checked core temp and voila, 100% on all 4 amd phenom 955 cores. I dont get it.
Specs are:
Amd phenom 955 be
4 gb crucial 1333
ati 5450
1tb hitachi hdd
Windows 7 host process (rundll32)?
View 4 Replies View RelatedAny way to add Remote Desktop (host) to Windows 7 home?I upgraded to home premium and now found that I can not remote desktop TO this pc Obviously I could upgrade from home to PRO but didn't know if I can just "add" RDP to this home PC at all I realize there are 3rd party software vendors I can use (think I saw VNC, mesh, go2mtg, etc)
View 7 Replies View RelatedI have a desktop computer running Windows 7 and a thin client (Wyse V90L) running Win XP Embedded. I am using Remote Desktop to log into my desktop computer running Windows 7. The problem is that despite having set up Remote Desktop on the client to 'Play on this Computer', no audio plays. When I click on the volume control, there is no slider and instead the message 'no audio device is installed' is displayed. If I choose to leave sound at my desktop, then it functions as expected.
View 1 Replies View RelatedWindows host process (Rundll32) has stopped working
Problem Event Name: APPCRASHApplication Name: rundll32.exe
Application Version: 6.1.7600.16385
Application Timestamp: 4a5bc9e0
Fault Module Name: DBACSU.dll
Fault Module Version: 1.0.3.3
[code]....
I've also found the startup thing on msconfig that may have something to do with it: CTMasterOnOffMonitor
So, every time I boot up and login to my laptop it says that the "Windows host process (Rundll32) has stopped working."
Is there a way to fix this?[CODE]
To keep my computer running quick, I usually skim through my processes at boot up and see what can be trimmed off from the starting processes, or just from my computer. Host Process for Windows Services shows up twice on the list. Right now at 125,080k and 75,476k memory. I don't recognize these processes or why they are using so much processing. Any advice for tuning those down or speeding up my PC in general (it automatically runs defrag, disc cleanup, standard accessories, etc. once a week).
View 1 Replies View RelatedI get an error message 3-4 times daily saying that the windows host process has stopped working. I am using Build 6956. I am doing normal things that i always do like build web applications, searching the internet, and writing a word document. It appears out of no where. I have attached a screenshot of the error message.
View 9 Replies View Relatedafter i installed "virtual box guest additions" on my OS(win 7 ultimate),it can't start(up). The OS has not a restore point.
View 9 Replies View RelatedCan i delete the host file from C Windows System 32 Drivers etc ?
View 9 Replies View RelatedHost process for windows task stopped working and desktop does not come up due to the dialog box of the host process window.
View 2 Replies View Related