I don't even know how it happened.
Picture: ImageShack - Online Photo and Video Hosting
Suddenly of icons on taskbar and start (I really mean all) are now looking like an Windows Media Player file. How do I remove it?
I keep losing the icons in Explorer, even with a fresh install of Windows 7. It takes some time, but sooner or later they disappear. It's always Internet Explorer first (associated with .mht files) and now I've lost Chrome (associated with .htm).
Rebuilding the Windows 7 icon cache has not worked in the past.
How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
View 4 Replies View RelatedAll my icons change to ms word icon, and I can use any of my desktop.
View 1 Replies View Related[code] I get the following error message when trying to view a video file *.asx."Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."Plus, I also get a similar error msg with WMC.However if I select VLC to play the video, it plays just fine. Plus I get the following information. [code] Why can't WMP or WMC play this native MSFT video format?
View 2 Replies View RelatedI can't camera audio to work with Windows 7 64bit video works great but no audio
View 1 Replies View RelatedI am not looking to select a file here or there and hide them myself. The byproduct of editing certain files in video editing software is they create extra files to the files already. Is there a way I can tell windows 7, "Can you hide any files with the.sfk extension from here on out?
View 2 Replies View RelatedI'm having trouble getting Bass out of my subwoofer and need some help figuring out this problem. I have played with the WOW effects and equalizer in Windows Media Player and the subwoofer does work there, but it's very weak and doesn't kick in at all with other programs or online.
I don't know too much about audio, but I do know I'm having troubles since updating to Windows 7. I recently upgraded from Vista Home Premium to 7 Home Premium. My Audio setup is a set of Altec Lansing speakers and a Subwoofer. The system as a whole is connected to my machine at the Green audio jack. All wires are plugged in firmly and tightly.
This leads me to believe that I need to look into a Driver Update. Unfortunately, I don't know where do begin finding my Audio card type or driver. If anyone knows how to find this or figure out which Driver update might be useful for me I'd greatly appreciate it.
My problems continue with Win 7's faulty 'file associations' subroutine. Have a friend with a new Toshiba Core i5 on which he has MS Office 2003 Professional fully installed, including PowerPoint. Three weeks ago, he complained that he could not open .pps files attached to e-mails, so he brought the computer to me. I opened the file associations subroutine, found .pps in the list of extensions, and ultimately (tha'ts another whole story) got MS PowerPoint registered as the default program to open such files.Today he claimed he got another e-mail with a .pps attachment, and could not open it, so brought the computer to me again. I don't know why he wasn't able to open it, because I called up the e-mail, clicked the .pps attachment and it opened perfectly. However, I opened the /Default Programs/Set Associations list and scrolled down to see what the .pps entry said was the current default.
View 2 Replies View RelatedI accidentally associated the .lnk (shortcut) extension with a program. Now all my desktop icons open that program (Picassa). I tried to change it back to Unknown Program using "set associations - change programs" but it does not give the option to change it to "Unknown Association"
View 3 Replies View RelatedI found some file extensions (.modd and .moff) that I didn't want to be viewed in the folder, so I need to make them hidden.So, would someone here tell me how to make those two extension to be added to type of extension that automatically hidden by windows 7?
View 7 Replies View RelatedSo I'm trying to change the icon of a particular file type. i.e., pdf icon is gone for some reason so I want to put one there. All i can find on the net is 'open up file types manager' but how it will be done? I am using Windows 7 x64 home premium.
View 9 Replies View RelatedI used to be able to open replays of a certain game (Warcraft 3) just by simply double clicking on them. I reinstalled Windows 7 2weeks ago, along with the game. Now when I double click them, it doesnt know what program to use --> I go through the standard "open with" and find my war3.exe. Now when I go to double click the replay file, it openes warcraft3 not the replay itself (like it used to, and like how I want it).
Ive done alot of digging around and trying to find how to fix it, but Im still unable to fix this. What I've found out that I basically need the replay files (.w3g) to open in E:Program filesWarcraft IIIwar3.exe -loadfile "%1"
The problem is, that with windows7 I am unable to find the place where I can insert this, all I was able to find was ways for XP/Vista but they are different from Windows 7.
On XP there is a facility to add programs to a file type - you can add more than one program, and each one has a name (which appears in the pulldown list), and a program location, which can have options added to it, e.g. an html file could have a browse function, and an edit function (I want to use SeaMonkey with a -compose option, assuming I can do this). I don't want to have to pick one program as the default unless the other one is easily accessible. I'm sure Windows 7 wouldn't kill a very useful XP facility... would they?!
View 8 Replies View RelatedI've created a slideshow file, using FastStone Image Viewer 4.3, and pictures I took myself in our back yard. The file is *.exe and self-executes correctly on my computer. I've scanned it with MSE and it's clean and virus-free.I want to send it to our daughter, using my Hotmail account, as a normal attachment to a normal email msg. But Hotmail blocks it completely since it's an executable file type.So I tried to just rename a copy of it on my hard drive, first, to *.txt. But when I select the *.exe filename and then click Rename, I can't seem to get access to the extension part of the current file name; the exe after the dot. So is there a way I can change the file type in windows from "application" to a type Hotmail so windows won't block as an email attachment? Then tell the recipient to change it back to *.exe on her end?
View 2 Replies View RelatedI have a document that has acquired a .lnk extension and shows a Shortcut type file and I cannot open.I was suggested to go to Sart > Control Panel > Programs > Default Programs > Associate a file type or protrocol with a program > Set Assocations I did that and chose Word to open the document. The result was that almost all programs including IE and Systems Tool tried to open with Word.I had to run a System Restore from the Control Panel and all is fine now. However, can someone give me an idea how the document got the .lnk extension and Shortcut type? Also, is there a solution to this being that the above didn't work?I still cannot open the document and the program associated with .lnk reverted to unknown application.
View 3 Replies View RelatedI have seen this pop up a few times and have no idea why and/or how to make it stick. Occasionally, the file type is in the lower-right corner of the album art. This has been added on the fly by WMP12. How to configure this?
View 2 Replies View Relatedcould someone please recommend me a few good file identification tools that can be used under windows ?
View 2 Replies View RelatedIn Default Programs, When I select 'Associate a file type or protocol with a program'. When I select an extension and click the Change Program button, the program I want is not on the list, So I select [Browse] and select the program I want then nothing happens. How do I add a program to the list ?
View 2 Replies View RelatedI have a media library with, surprisingly enough, media in it! Videos to be exact. Each of the sub-folders have in them videos as well as .nfo files for displaying data awesomeness in the likes of XBMC. However, I do not like the way it makes my folders look when I browse to them in explorer.
Is there a way to hide all my *.nfo files only in the Video folder and subfolders?
I've accidently set another .cnf filetype to be known, as well. It's just so aggravating to see them have an icon as if they're good to open..how can I make them to open with nothing once again..?
View 9 Replies View RelatedIn Windows XP, Explorer I was able to select multiple files of different file types, right click and select print. In Win 7 64 bit print is not a choice when I select multiple files of different types. Is there a way to make this work or is it just an option that was left out of Win 7 for some reason?
View 3 Replies View Relatedwhen i try to open an password protecttion excel sheet. It prompt me this message "Excel cannot open this file. The encryption type used is not available, contact the author of the files. More encryption types are available using the High Encryption Pack". When saving the excel file with password. It prompt me another message again, ""Excel is unable to encrypt your file. Please contact your system administrator to resolve this problem. Do you wish to remove encryption and try again?
View 4 Replies View RelatedRestore Default Windows 7 File Extension Type Associations.
View 0 Replies View RelatedI ask because I have just noticed that when I open WORD files that the newly generated WBK-files are visible despite me using the "attrib +h *.nfo /s" command previously. I foolishly hoped that also all future '*.wbk's would automatically be hidden too. Is there anything that I can do about it without repeating the manual command prompt all the time as suggested in Hide all of a certain file type in a folder tree?
View 1 Replies View RelatedIn XP when I chose Folder options and then the File types tab, Folder was listed as a file type (Extension=None). I could select it, click the Advanced button and add a program to that file type. I would add the phrase CommandPrompt connected to the program cmd.exe. This then would allow me to right click on a folder and open the DOS window at that location. A big time saver for the work I do. I cannot find how to do this in Windows 7.
View 2 Replies View RelatedSo, I was having problems with my .dat file type icon, and in frustration trying to get rid of the icon and start all over again, I deleted the file type in the registry. Will this cause problems in the future, even though I re-added it in the registry? I don't see any problems with them right now, but I didn't know if I might have troubles in the future due to this.
View 1 Replies View RelatedHow to Associate a File Type or Protocol Default Program in Window 7 ?
View 0 Replies View RelatedI've asked this question before but haven't read a solution. Seems it a common problem. And yes, the auto arrange on the desktop is unchecked.
View 3 Replies View RelatedI am trying to modify the attributes of a file (in this case the album title for a group of MP3 files in 1 folder).All I want to do is change one character.W7 (home premium 32bit) blanks out the whole box, and I have to type the all of the text again.
View 1 Replies View RelatedI am experiencing a problem with Windows 7 professional, 32 bit, where I am getting an error message (detailed below) when trying to open a file with an unregistered extension. For example, if I rename a file that ends in .txt and contains text, to something with a .test extension the "Open with..." dialog never appears, and I instead get the permission denied message. AVG premium is installed, however through a combination of disabling AVG as well as providing exceptions to the file extension, I can fairly safely rule out intervention from AVG. Windows Defender is disabled, Windows UAC is disabled as well. The Windows Firewall is on, but checking the settings for the firewall suggest no issues would be coming from there.To add to the fire, if I register the .test extension to open with notepad, the file will open fine and text is displayed as expected. Also of note, I can read the file from command prompt even when the extension is not registered to an application.
View 1 Replies View Related