.lnk Extension And Shortcut Type File?
Aug 5, 2012
I have a document that has acquired a .lnk extension and shows a Shortcut type file and I cannot open.I was suggested to go to Sart > Control Panel > Programs > Default Programs > Associate a file type or protrocol with a program > Set Assocations I did that and chose Word to open the document. The result was that almost all programs including IE and Systems Tool tried to open with Word.I had to run a System Restore from the Control Panel and all is fine now. However, can someone give me an idea how the document got the .lnk extension and Shortcut type? Also, is there a solution to this being that the above didn't work?I still cannot open the document and the program associated with .lnk reverted to unknown application.
View 3 Replies
ADVERTISEMENT
Apr 26, 2011
I found some file extensions (.modd and .moff) that I didn't want to be viewed in the folder, so I need to make them hidden.So, would someone here tell me how to make those two extension to be added to type of extension that automatically hidden by windows 7?
View 7 Replies
View Related
Sep 11, 2012
I am experiencing a problem with Windows 7 professional, 32 bit, where I am getting an error message (detailed below) when trying to open a file with an unregistered extension. For example, if I rename a file that ends in .txt and contains text, to something with a .test extension the "Open with..." dialog never appears, and I instead get the permission denied message. AVG premium is installed, however through a combination of disabling AVG as well as providing exceptions to the file extension, I can fairly safely rule out intervention from AVG. Windows Defender is disabled, Windows UAC is disabled as well. The Windows Firewall is on, but checking the settings for the firewall suggest no issues would be coming from there.To add to the fire, if I register the .test extension to open with notepad, the file will open fine and text is displayed as expected. Also of note, I can read the file from command prompt even when the extension is not registered to an application.
View 1 Replies
View Related
Jan 13, 2009
How to Remove or Restore the Shortcut Extension in Windows 7 ?
View 0 Replies
View Related
May 6, 2011
What is a .rom file extension and how do I open it.?
View 4 Replies
View Related
Oct 23, 2011
I was trying to open a .lnk file and when I when to open it I clicked open in PDF file format. All my icons on my desktop turned into PDF files and I couldn't even open Firefox or Yahoo communicator because it was in the wrong format. I tried to follow some help and download and merge the .reg fix. I have tried different things and restarted my PC many times. All the icons look like the .reg building blocks now and I can not restore the icons like before.
View 3 Replies
View Related
Jul 26, 2012
For a week or so now, I've been having this issue where I can't delete this file without an extension. It was supposed to be a .RAR file but something failed and it left this. Now when I try sending it to the recycle bin it says that this is not the valid location of the file. So now I don't know where it is. I tried using FileAssassin but it couldn't be deleted.
View 6 Replies
View Related
Sep 25, 2011
So, I've got Windows 7 Starter, and I need to associate an extension with a program. I know how to do this, but when I click on the program to add the select program box, it never shows up when I hit Ok. So I can't change open with. The Program is Pivot Stick Figure animator, and the extension is .piv. It's worked before on a previous computer.
View 10 Replies
View Related
Sep 11, 2010
I would like to change the default program for .pdf from TeXworks to foxit reader, but the file extension .pdf doesn't show upfoxit also doesn't show up in the set default programsi can "open with" foxit and texworks, i would just like to quickly be able to open .pdfs with a double click
View 2 Replies
View Related
Mar 26, 2012
Why isn't .msi connected with a specific file extension?
View 1 Replies
View Related
Nov 5, 2009
I make use of the Windows 7 Backup and Restore programs.
Automatically everyday a backup is scheduled.
This backup is configured to contain all user files and a system image.
Now I have tried to find the system image, but I don't know what file extension the image backup should have.
In my backup folder, below, only two .VHD files are present, and a bunch of XML Documents.
X:\WindowsImageBackup\XXXX\Backup 2009-11-04 160010
Can someone explain me in which files the backup and restore programs save the backups?
Also I like to know where I should look for, to know for sure my backup is done successfully.
View 5 Replies
View Related
Mar 8, 2011
how to delete mah posti figured it out sorry guys dunno how to delete mah posti figured it out sorry guys dunno how to delete mah posti figured it out sorry guys dunno how to delete mah posti figured it out sorry guys dunno how to delete mah post
View 1 Replies
View Related
Mar 21, 2012
Every time I try to click on this particular video file, my computer will start to freeze up.My laptop is pretty new so I don't think it's a hardware issue.The avi file is over 700mb. I've tried deleting it via command prompt but it will just hang there.
View 9 Replies
View Related
Oct 30, 2010
How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
View 4 Replies
View Related
Dec 15, 2011
Changed shell file extension to notepad. How do I change it back.
View 9 Replies
View Related
Feb 2, 2013
When I try and change the program that a file uses to open, the checkbox is checked and greyed out for every single file extension on my computer.The problem is similar to this:
http:[url]....
The problem is, for both registry keys it says to change, the "NoFileAssociate" is missing for both of them. How do I get it back?
View 1 Replies
View Related
Jun 2, 2011
Everyday I upload some files to my website and to simplify my website operations, I use the same filename and just upload a file with new information every day. The case of file extensions is of no consequence to Windows 7, but it matters to my website. I want to standardize on one case and it doesn't matter which as long it's the same all the time. I have one app, the snipping tool, which seems to generally make files using uppercase, but I have some existing files that are lower case. I have tried to get rid of the lower case extensions by deleting the file and then recreating it with the same name. When I do, Windows changes the case from upper to lower. If I simply create a brand new file with no previous instances of that file in existence (as far as I know), then the default case is upper. How does one go about converting all existing files of a particular type to a standard file extension case, be it upper or lower.
View 8 Replies
View Related
Dec 19, 2011
I'm looking to stream some of my Bluray rips from my Media Center server to my 360. I just recently got a 1080p TV (kinda late I know) and was just doing rips at 720p in .mkv and then converting them using mkv2vob to .m2ts using what I assume is an mpeg2 codec. I've noticed if I do the same with 1080p movies it stutters and the sound cuts out here and there. I havent tried yet, but I read that using x264 as the codec and .mp4 as the containter (please forgive me I'm using the wrong terminology, I really dont know a ton about this). Would that give me better performance? Or could someone suggest a way to make 1080p while still keeping good quality 5.1 audio stream perfectly?
Heres my "server's" specs and network if it helps:
AMD 9600 Quad Core
4gb RAM
10/100 LAN (no gigabit)
GeForce 8600GT graphics card
Netgear 16 port 10/100 switch, both the 360 and the server are on it. It might be important to note that the server could be recording one or two shows at once while I'm watching the movie.
View 3 Replies
View Related
Jul 4, 2011
I need to be able to upload jpeg files to our website and the software package I use for that requires that the filename be entered in lower case in the format "filename.jpg". However, I've recently upgraded from XP to Windows 7 and note that JPG is being added in uppercase after my typed fileneme so that I end up with "filename.jpg.JPG" which is rejected by the uploading software. My web designer tells me that this is attributable to automatic file type recognition in Windows 7, and not to the upload software. How can I switch that off?
View 2 Replies
View Related
Jun 4, 2012
[code] I get the following error message when trying to view a video file *.asx."Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."Plus, I also get a similar error msg with WMC.However if I select VLC to play the video, it plays just fine. Plus I get the following information. [code] Why can't WMP or WMC play this native MSFT video format?
View 2 Replies
View Related
Jul 24, 2012
My problems continue with Win 7's faulty 'file associations' subroutine. Have a friend with a new Toshiba Core i5 on which he has MS Office 2003 Professional fully installed, including PowerPoint. Three weeks ago, he complained that he could not open .pps files attached to e-mails, so he brought the computer to me. I opened the file associations subroutine, found .pps in the list of extensions, and ultimately (tha'ts another whole story) got MS PowerPoint registered as the default program to open such files.Today he claimed he got another e-mail with a .pps attachment, and could not open it, so brought the computer to me again. I don't know why he wasn't able to open it, because I called up the e-mail, clicked the .pps attachment and it opened perfectly. However, I opened the /Default Programs/Set Associations list and scrolled down to see what the .pps entry said was the current default.
View 2 Replies
View Related
Mar 19, 2011
I accidentally associated the .lnk (shortcut) extension with a program. Now all my desktop icons open that program (Picassa). I tried to change it back to Unknown Program using "set associations - change programs" but it does not give the option to change it to "Unknown Association"
View 3 Replies
View Related
Jul 6, 2011
So I'm trying to change the icon of a particular file type. i.e., pdf icon is gone for some reason so I want to put one there. All i can find on the net is 'open up file types manager' but how it will be done? I am using Windows 7 x64 home premium.
View 9 Replies
View Related
Mar 6, 2012
I used to be able to open replays of a certain game (Warcraft 3) just by simply double clicking on them. I reinstalled Windows 7 2weeks ago, along with the game. Now when I double click them, it doesnt know what program to use --> I go through the standard "open with" and find my war3.exe. Now when I go to double click the replay file, it openes warcraft3 not the replay itself (like it used to, and like how I want it).
Ive done alot of digging around and trying to find how to fix it, but Im still unable to fix this. What I've found out that I basically need the replay files (.w3g) to open in E:Program filesWarcraft IIIwar3.exe -loadfile "%1"
The problem is, that with windows7 I am unable to find the place where I can insert this, all I was able to find was ways for XP/Vista but they are different from Windows 7.
View 3 Replies
View Related
Aug 30, 2010
On XP there is a facility to add programs to a file type - you can add more than one program, and each one has a name (which appears in the pulldown list), and a program location, which can have options added to it, e.g. an html file could have a browse function, and an edit function (I want to use SeaMonkey with a -compose option, assuming I can do this). I don't want to have to pick one program as the default unless the other one is easily accessible. I'm sure Windows 7 wouldn't kill a very useful XP facility... would they?!
View 8 Replies
View Related
Jun 18, 2011
I've created a slideshow file, using FastStone Image Viewer 4.3, and pictures I took myself in our back yard. The file is *.exe and self-executes correctly on my computer. I've scanned it with MSE and it's clean and virus-free.I want to send it to our daughter, using my Hotmail account, as a normal attachment to a normal email msg. But Hotmail blocks it completely since it's an executable file type.So I tried to just rename a copy of it on my hard drive, first, to *.txt. But when I select the *.exe filename and then click Rename, I can't seem to get access to the extension part of the current file name; the exe after the dot. So is there a way I can change the file type in windows from "application" to a type Hotmail so windows won't block as an email attachment? Then tell the recipient to change it back to *.exe on her end?
View 2 Replies
View Related
Nov 17, 2010
I have seen this pop up a few times and have no idea why and/or how to make it stick. Occasionally, the file type is in the lower-right corner of the album art. This has been added on the fly by WMP12. How to configure this?
View 2 Replies
View Related
Jan 6, 2012
could someone please recommend me a few good file identification tools that can be used under windows ?
View 2 Replies
View Related
May 19, 2012
In Default Programs, When I select 'Associate a file type or protocol with a program'. When I select an extension and click the Change Program button, the program I want is not on the list, So I select [Browse] and select the program I want then nothing happens. How do I add a program to the list ?
View 2 Replies
View Related
Apr 30, 2010
I have a media library with, surprisingly enough, media in it! Videos to be exact. Each of the sub-folders have in them videos as well as .nfo files for displaying data awesomeness in the likes of XBMC. However, I do not like the way it makes my folders look when I browse to them in explorer.
Is there a way to hide all my *.nfo files only in the Video folder and subfolders?
View 9 Replies
View Related
Jul 29, 2010
I've accidently set another .cnf filetype to be known, as well. It's just so aggravating to see them have an icon as if they're good to open..how can I make them to open with nothing once again..?
View 9 Replies
View Related
