Windows 7 File Extension - Checkbox Is Checked And Greyed Out?

Feb 2, 2013

When I try and change the program that a file uses to open, the checkbox is checked and greyed out for every single file extension on my computer.The problem is similar to this:

http:[url]....

The problem is, for both registry keys it says to change, the "NoFileAssociate" is missing for both of them. How do I get it back?

View 1 Replies


ADVERTISEMENT

Network ID Checkbox Greyed Out

Aug 19, 2011

My Windows 7 pro (32 bit) workstation suddenly cann't access domain share folder also other workstation.

I discover that Network ID in System properties is disabled. Netlogon and computer browser service is stopped.

I cann't start the service. I am domain and local admin

View 1 Replies View Related

Network ID Checkbox Greyed Out

Aug 27, 2009

I am trying to connect Windows 7 64bit to my SBS 2003 server and I cannot set the domain name in the network ID Box. It is greyed out. I am using the Beta release build 7000.

While debugging, I noticed that the netlogon service is not started, and it will not start when I click on it. Trying to start it generates the following error message in the System Log:

This computer is configured as a member of a workgroup, not as a member of a domain. The Netlogon service does not need to run in this configuration.

I didn't intentionally set it up as a member of a workgroup, how can I disable the workgroup membership so that I can get it to join my office domain?

I also tried to do the http:....Connect computer process after creating the client on the server, but I get a message that Client SBS setup does not accept computers with this Microsoft Operating System.

Is there anything that I can do to get this to connect, or is this a problem with my Beta version.

View 9 Replies View Related

Aero Peek Is Checked On But It Is Not Working And Is Greyed Out?

Feb 23, 2010

I have used all my resources to fix this and am at a loss. My aero peek is checked on but it is not working and is greyed out.

View 3 Replies View Related

Checked Hosts File: Found 120.0.0.1 Localhost?

Feb 7, 2012

Windows 7 64 bitI went to the Microsoft website and reset the hosts file. (I just copied the text on the page that said it was for the Windows 7 hosts) Prior to the hosts reset, the only text in there was 120.0.0.1 localhost. Anyone know what this means? This happened one other time before, so it has to be something.

View 3 Replies View Related

What Is A .rom File Extension And How To Open It

May 6, 2011

What is a .rom file extension and how do I open it.?

View 4 Replies View Related

File Extension Restore

Oct 23, 2011

I was trying to open a .lnk file and when I when to open it I clicked open in PDF file format. All my icons on my desktop turned into PDF files and I couldn't even open Firefox or Yahoo communicator because it was in the wrong format. I tried to follow some help and download and merge the .reg fix. I have tried different things and restarted my PC many times. All the icons look like the .reg building blocks now and I can not restore the icons like before.

View 3 Replies View Related

Cannot Delete File Without Extension?

Jul 26, 2012

For a week or so now, I've been having this issue where I can't delete this file without an extension. It was supposed to be a .RAR file but something failed and it left this. Now when I try sending it to the recycle bin it says that this is not the valid location of the file. So now I don't know where it is. I tried using FileAssassin but it couldn't be deleted.

View 6 Replies View Related

Associating A File Extension With A Program?

Sep 25, 2011

So, I've got Windows 7 Starter, and I need to associate an extension with a program. I know how to do this, but when I click on the program to add the select program box, it never shows up when I hit Ok. So I can't change open with. The Program is Pivot Stick Figure animator, and the extension is .piv. It's worked before on a previous computer.

View 10 Replies View Related

How To Hide Some New Extension File Type

Apr 26, 2011

I found some file extensions (.modd and .moff) that I didn't want to be viewed in the folder, so I need to make them hidden.So, would someone here tell me how to make those two extension to be added to type of extension that automatically hidden by windows 7?

View 7 Replies View Related

File Extension Doesn't Show Up?

Sep 11, 2010

I would like to change the default program for .pdf from TeXworks to foxit reader, but the file extension .pdf doesn't show upfoxit also doesn't show up in the set default programsi can "open with" foxit and texworks, i would just like to quickly be able to open .pdfs with a double click

View 2 Replies View Related

MSI Connected With Specific File Extension?

Mar 26, 2012

Why isn't .msi connected with a specific file extension?

View 1 Replies View Related

.lnk Extension And Shortcut Type File?

Aug 5, 2012

I have a document that has acquired a .lnk extension and shows a Shortcut type file and I cannot open.I was suggested to go to Sart > Control Panel > Programs > Default Programs > Associate a file type or protrocol with a program > Set Assocations I did that and chose Word to open the document. The result was that almost all programs including IE and Systems Tool tried to open with Word.I had to run a System Restore from the Control Panel and all is fine now. However, can someone give me an idea how the document got the .lnk extension and Shortcut type? Also, is there a solution to this being that the above didn't work?I still cannot open the document and the program associated with .lnk reverted to unknown application.

View 3 Replies View Related

What File Extension Has The Image Backup ?

Nov 5, 2009

I make use of the Windows 7 Backup and Restore programs.

Automatically everyday a backup is scheduled.
This backup is configured to contain all user files and a system image.

Now I have tried to find the system image, but I don't know what file extension the image backup should have.

In my backup folder, below, only two .VHD files are present, and a bunch of XML Documents.
X:\WindowsImageBackup\XXXX\Backup 2009-11-04 160010

Can someone explain me in which files the backup and restore programs save the backups?
Also I like to know where I should look for, to know for sure my backup is done successfully.

View 5 Replies View Related

Accidentally Saved Invalid File Extension

Mar 8, 2011

how to delete mah posti figured it out sorry guys dunno how to delete mah posti figured it out sorry guys dunno how to delete mah posti figured it out sorry guys dunno how to delete mah posti figured it out sorry guys dunno how to delete mah post

View 1 Replies View Related

Computer Hangs When Clicking On File With .avi Extension?

Mar 21, 2012

Every time I try to click on this particular video file, my computer will start to freeze up.My laptop is pretty new so I don't think it's a hardware issue.The avi file is over 700mb. I've tried deleting it via command prompt but it will just hang there.

View 9 Replies View Related

Changed Shell File Extension To Notepad - How To Revert

Dec 15, 2011

Changed shell file extension to notepad. How do I change it back.

View 9 Replies View Related

Change File Extension Upper/lower Case?

Jun 2, 2011

Everyday I upload some files to my website and to simplify my website operations, I use the same filename and just upload a file with new information every day. The case of file extensions is of no consequence to Windows 7, but it matters to my website. I want to standardize on one case and it doesn't matter which as long it's the same all the time. I have one app, the snipping tool, which seems to generally make files using uppercase, but I have some existing files that are lower case. I have tried to get rid of the lower case extensions by deleting the file and then recreating it with the same name. When I do, Windows changes the case from upper to lower. If I simply create a brand new file with no previous instances of that file in existence (as far as I know), then the default case is upper. How does one go about converting all existing files of a particular type to a standard file extension case, be it upper or lower.

View 8 Replies View Related

Whats The Best File Extension/codec For 1080p/5.1 Streaming

Dec 19, 2011

I'm looking to stream some of my Bluray rips from my Media Center server to my 360. I just recently got a 1080p TV (kinda late I know) and was just doing rips at 720p in .mkv and then converting them using mkv2vob to .m2ts using what I assume is an mpeg2 codec. I've noticed if I do the same with 1080p movies it stutters and the sound cuts out here and there. I havent tried yet, but I read that using x264 as the codec and .mp4 as the containter (please forgive me I'm using the wrong terminology, I really dont know a ton about this). Would that give me better performance? Or could someone suggest a way to make 1080p while still keeping good quality 5.1 audio stream perfectly?

Heres my "server's" specs and network if it helps:
AMD 9600 Quad Core
4gb RAM
10/100 LAN (no gigabit)
GeForce 8600GT graphics card

Netgear 16 port 10/100 switch, both the 360 and the server are on it. It might be important to note that the server could be recording one or two shows at once while I'm watching the movie.

View 3 Replies View Related

Disable File Extension Recognition For Uploading Files To Website?

Jul 4, 2011

I need to be able to upload jpeg files to our website and the software package I use for that requires that the filename be entered in lower case in the format "filename.jpg". However, I've recently upgraded from XP to Windows 7 and note that JPG is being added in uppercase after my typed fileneme so that I end up with "filename.jpg.JPG" which is rejected by the uploading software. My web designer tells me that this is attributable to automatic file type recognition in Windows 7, and not to the upload software. How can I switch that off?

View 2 Replies View Related

Permissions Error When Opening A File With Unknown Extension Type?

Sep 11, 2012

I am experiencing a problem with Windows 7 professional, 32 bit, where I am getting an error message (detailed below) when trying to open a file with an unregistered extension. For example, if I rename a file that ends in .txt and contains text, to something with a .test extension the "Open with..." dialog never appears, and I instead get the permission denied message. AVG premium is installed, however through a combination of disabling AVG as well as providing exceptions to the file extension, I can fairly safely rule out intervention from AVG. Windows Defender is disabled, Windows UAC is disabled as well. The Windows Firewall is on, but checking the settings for the firewall suggest no issues would be coming from there.To add to the fire, if I register the .test extension to open with notepad, the file will open fine and text is displayed as expected. Also of note, I can read the file from command prompt even when the extension is not registered to an application.

View 1 Replies View Related

Auto-update Property Sheet Extension File Update

Oct 12, 2011

Is this file safe to have operating on my computer???

View 2 Replies View Related

File Extension Icon - Change Default Icon

Feb 5, 2010

How to Change the Default Icon of a File Extension in Windows 7 ?

View 0 Replies View Related

Faded Checkbox At 'Open With'?

Oct 31, 2012

At an 'Open with' why would the checkbox to 'Always use the selected program to open this kind of file' be faded?

View 1 Replies View Related

Individual Update's Checkbox Is Blank?

Jan 8, 2012

This happens pretty often to me... out of several "Important" updates available for download/install, one or two will have their checkboxes blank, so they are not selected for installation automatically.I can't detect a pattern of which ones are left blank. It always worries me a little, wondering if that particular update was left blank for a reason. I'm running a customized version of Windows 7 64-bit, so maybe the customization has something to do with it, but I can't see how a tweak that was performed before I even installed the OS can have impact on which updates are defined as "automatic".What does it mean for an update to have a blank checkbox in Wondows Update?

View 9 Replies View Related

Syncing My Documents Folder - Special Permissions Checkbox Grayed Out

Sep 10, 2012

So I was working with moving my My Documents folder from syncing with Dropbox to Box and I messed up a bit. Well, at least I've found it and have access to it. Now I'm working on restoring a previous version.

Problem A: It's hidden and I can't figure out how to undo that because:
Problem B: It's a shortcut and I don't know how to switch that back to something that works
Problem C: It won't let me access the previous versions. It says:
"Windows cannot access \localhostC$GMT-2012.09.07-20.26.55Users My Documents.

You do not have permission to access "Contact your network administrator to request access". I am the administrator and I have full access to the folder except for the "special permissions" check box which is grayed out empty.

View 3 Replies View Related

One Of Your Disks Need To Be Checked For Consistency

Nov 2, 2009

I installed Windows 7 a few weeks ago, and every time I boot up, it says that one of my disks needs to be checked for consistency. The first two times, I let it check for errors, none were found. But it keeps wanting to check every time I boot up. Sometimes I skip, sometimes I let it check, with no errors found. Is there any way to make it go away? A setting or something?

View 9 Replies View Related

Disks Need To Be Checked For Consistency (ever Since Last Update)

Apr 24, 2012

a few months ago (early January) I bought a new laptop from Best Buy because my previous one was ancient and finally crapped out on me. I mainly use the computer for online gaming and surfing the internet. The computer has worked fine, until this past weekend. When I went to turn off the computer, the computer installed updates. The next morning I turned the laptop on, but instead of finishing installing the updates, the computer started to run a disk check, saying:

Checking the file system on C:
The type of the file system is NTFS
Volume label is OS
One of your disks needs to be checked for consistency...

I allowed the disk check to run and then the computer restarted and booted normally. The computer worked fine for a little bit, but then internet pages started not responding, the mouse pointer lags around the screen, and occasionally I cant get programs to open.Now, everytime I boot up the computer, it runs the disk check, and when the check completes, it runs it again and again and again, restarting each time. Each time it runs the disk check it finds the same files that cannot be read.As it stands, the computer works fine sometimes, and goes into not responding/laggy mode at others.

View 3 Replies View Related

BSOD Randomly / Checked Dmp Files / 3 Different Reasons Given

Apr 1, 2012

I am running Windows 7 x64 on an HP p6653.

-5GB Ram
-Athlon II X@ 250 processor 3 GHz
-The machine is around a year old

It randomly gives BSOD. I have checked the dump files and it seems to show at least 3 possible reasons depending on the file. I have updated drivers from the manufacturers sites directly to try and fix the problem. Other solutions I found for the various error codes did not seem to apply.BTW- Please don't pay attnetion to the dump files created on 4-1-12. I know why those happened. It was my error.

View 3 Replies View Related

Computer Needs To Be Checked For Consistency, Is The Drive Failing

Jul 9, 2012

Here is the log:Checking file system on C:The type of the file system is NTFS.One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 3)...
Attribute record of type 0x80 and instance tag 0x1 is cross linked
starting at 0x440d16 for possibly 0x4 clusters.
Some clusters occupied by attribute of type 0x80 and instance tag 0x1
in file 0x188b2 is already in use.
Deleting corrupt attribute record (128, "")
from file record segment 100530.

[code]....

View 3 Replies View Related

Processes And Applications Freezing - Disk Needs To Be Checked For Consistency

May 3, 2011

I run a windows 7 7600 build, which is not genuine. About two weeks ago, nearly every time I booted my computer, iId get "one of your disks needs to be checked for consistency" message, while windows would carry on with the said process, isolating, replacing and deleting all files necessary. I run a full scan, with my avg, found no virus, did some more scans, and the said process has stopped occuring. However, since this has stopped, my computer has been consistently and very much frequently been freezing processes and applications for a period of 2-20 seconds.

Games would freeze on their tracks (especially frustrating on the online short) photoshop brushes would stop rendering, movies would stop their videos (oddly sometimes the sound carries on), internet explorers would stop loading etc. etc. I've defragmented my 0% fragmented drives, just in case, yet the problem persists. I saw somewhere that windows might be pulling this trick, so i'd get the genuine ones. but i can't imagine that's the case, because windows have detected my version as not genuine for a couple of months now, (run as genuine for about half a year before).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved