Windows 7 64 Bit GTX 460 & Windows Kernal Mode Driver

Oct 20, 2011

Windows 7 64 bit with a GTX 460 graphics card (desktop) an im getting an error were my screen flashes to along and digital back and forth and accationaly the computer will reboot and say DirectX 9 could not be initalized when i have DirectX 11 or when the screen flashes it will say windows kernal mode driver not responding and has recoverd

Specs:
Windows 7 64 bit
GTX 460 Graphics Card
27" Samsung Monitor
16GB of DDR3
165GB Hard Drive
ASUS Motherboard
Amd Phenom 3.01GHZ
overclocked to 5.00GHZ

View 2 Replies


ADVERTISEMENT

Weird Nvidia Windows 7 Kernal Mode Driver Has Stopped Working?

Apr 1, 2012

I read a few forums about this issue but mine's different. It doesn't crash or display any error while gaming. It happens when i'm on the desktop exploring. If don't do anything it wont display the error, however, when i start to right click on desktop, it flickers and displays the error "Nvidia Windows Kernel Driver mode driver has stopped responding and recovered" something link that. This also happens when a window is active like when i'm on the Control Panel Window (don't know with other windows, haven't tried yet), It flickers every 10 - 30 secs and display the error. After a few hours of researching and troubleshooting i think finally fixed it by putting the "Peformance Settings to Best Performance". I don't know what caused this. It didnt happen to me before. My Peformance settings was always set to Best appearance until now. Anyone knows the fix to this error? I don't like the appearance set to Best Peformance, it looks like Windows 98 If you experience similar errors like mine, try setting your Performance settings to Best Peformance and post comments here if it works[CODE]

View 2 Replies View Related

NVIDIA Kernal Mode Driver Version 190.62

Sep 22, 2009

I'm experiencing a problem with my NVIDIA Windows Kernal Mode Driver Version 190.62.

The problem has crashed my computer a number of times, any help would be appreciated.

View 9 Replies View Related

Enable N.T. 4.0 Kernal Mode On Windows 7?

Aug 13, 2010

How can I enable N.T. 4.0 Kernal mode on my windows 7 ?

View 11 Replies View Related

Windows 7 Kernal Driver Stopped Responding And Has Now Recovered?

Jul 20, 2012

Black screen then lag then goes right to normal how to fix?Im using NVIDIA sorry don't know how to give in my details about my laptop bu

View 9 Replies View Related

Kernal Inpage Error Windows 7

Jan 28, 2013

Okay, so this all started when my hard drive failed. I had tested my (old) hard drive on other computers so I know it really failed. I bought a 120 GB SSD and a 750 GB Seagate external hard drive for my computer. ( my computer is a Asus Republic of Gamers G73SW, 8 GB of ram i7 intel quad core @ 2.0 GHz) if you would like to know. , Ever since I replaced the hard drive, my computer freezes mostly while I am gaming and gives the Kernal Inpage Error. Even when I knew my old hard drive was going out soon, it never gave me that error, it would just crash, (that is the old hard dive). I went to the place I bought the new SSD and external hard drive and they told me it was probably an issue with my motherboard or operating system (windows 7 Ultimate, which I paid for) I did though have a new power jack put on my mother board about 8 months ago.. Never had any type of problem. And just FYI I do work at a computer company, kinda like Geek Squad, I am fairly new and only work with software, not hardware like this stuff. I know for sure I have no viruses or anything like that. ( checked a lot ) ran disk check's and all of that. Just don't know if my mother board is really the problem or maybe the new SSD ( which Best Buy when I asked about it told me it was my mother board, and not the new SSD I bought from them ) The weird thing is when it does crash, my BIOS will not recognize that the SSD is even there( after a crash ) my computer will not boot and I check the BIOS and my SSD will not show up, For hours sometimes... So I dont know I have asked everyone from my work and other computer shops and they all say they don't know or give different answers, only had this computer a little over a year (I love it!) but now just thinking to build my own....

View 6 Replies View Related

Windows 7 Constantly Freezing / Kernal Power Error 41?

Jul 25, 2012

Have had a home built PC now for a bout a year, i have my OS running from dual SSDs in a RAID configuration (for fast access of databases), recently i noticed my machine began crashing a few times more than i had been used to, but recently it has really started to increase in frequency. When i turn the power off to my machine and reboot, what often happens is the system freezes again just before i reach the password login screen (freezes at the screen with the windows logo). I have checked the event viewer, heres what i found after the last crash today.

View 1 Replies View Related

[BSOD] Kernal Data Inpage Error?

Sep 7, 2012

I get this BSOD whenever I leave my computer for 5-10 minutes, It just started happening.I have done CHKDSK and it came up with no errors. I don't know what info you need, I am attaching the files necessary.

View 1 Replies View Related

Kernal Data Inpage Error Blue-screen Event

Apr 28, 2012

A week or two ago I encountered the Kernal Data Inpage Error blue screen event. I had the university brains look over it then remote Dell technical support. After the technician was done it seemed to be much better. Even a bit quicker! (This computer is nearing 1 year old. Alienware M14x laptop, Windows 7)But the blue screen came again a couple times today while I was modding Skyrim. I did chkdisk, ccleaner (both cleaned and registry checked), disk defragmenter, disk cleaner, malware scan, and everything seems to have done what it was supposed to. No blue screens yet (i could try to provoke one with that same file?) but Skyrim is so much slower. Last night I was on high graphical settings with 40+ fps, now its lagging below 30fps. I did all of the above and a restart here n there.

View 6 Replies View Related

How To Install 32 Bit Video Driver In Virtual Windows 7 Mode 32 Bit From Windows 7

Aug 26, 2012

I have a win7 64 bit pro system that I have created a win7 32 bit virtual machine in because of one program that won't operate in 64 bit. The program needs 32 bit video drivers installed but I can't figure out how to do that.

I opened the setup on the video card cd but it says "the graphics adapter installed in this system is not compatible with the current set of drivers" and it won't install the drivers. The opening screen of the setup cd says "installed graphics adapter: not found".

View 5 Replies View Related

Display Driver Keeps Reverting To Windows 7 Classic Mode?

Sep 7, 2011

How do I revert back to the standard windows 7 display mode? It's driving me crazy - is there any way to prevent this from happening?

View 2 Replies View Related

Windows Update - Kernel-Mode Driver Framework Version 1.11 Failed

Nov 15, 2012

I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week).

View 10 Replies View Related

Display Driver Windows Kernel Mode Nvlddmkm Stopped Responding

Dec 1, 2009

I have just installed win7 and I'm getting problems with it.

Whenever I play games after 2-5mins I get a black screen and a pop up saying "display driver windows kernel mode nvlddmkm version 195.62 has stopped responding and has recovered"

This is very annoying because i never had any such issue with win XP

I have the latest Nvidia drivers 195.62 but i can't fix this, i also tried to reinstall drivers in safe mode but I'm still having this issue.

I also ran memtest86+, my RAM has no issues.

Can anyone help me?

View 4 Replies View Related

Windows 7 Runs Extremely Slow In Normal Mode, But Nicely In Safe Mode?

Aug 1, 2011

the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.

View 2 Replies View Related

Windows 7 Working On Safe Mode And Hanging In Normal Mode In Dell Vestro

May 8, 2012

window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified

View 1 Replies View Related

Windows 7 Doesn't Start In Normal Mode But Starting Safe Mode

Jan 16, 2013

I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.

View 1 Replies View Related

[XP Mode] Unable To Use Xp Mode Printer In Windows 7 Host

Apr 26, 2011

I have installed the 32 bit driver for my Minolta 1300W. I can print happily in XP mode but I don't seem to be able to be able to use the printer in the Windows 7 host (64 bit Pro). Should I be able to see it as a printer if I attempt to print a document in Office? Launching the application doesn't help.

View 2 Replies View Related

Windows 7 Only Boots In Normal Mode, Not Safe Mode?

Aug 13, 2012

Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.

View 6 Replies View Related

Windows Xp Mode Not Working When Reinstalling It Says Xp Mode Already Installed?

Apr 12, 2012

windows xp mode not working properly. When reinstalling it says "windows xp mode already installed". I cant install the virtual pc associated with XP Mode.

View 1 Replies View Related

Cant Start Windows On Normal Mode, Only Safe Mode?

Oct 28, 2012

I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.

View 44 Replies View Related

Can't Start Windows On Normal Mode, Or Safe Mode

Feb 18, 2013

i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,

View 4 Replies View Related

XP Mode - Lauch Links In Xp Mode In Windows 7, Ie7,8,or 9?

Apr 29, 2011

My entire organization in currently running XP, however we are thinking about going to Windows 7 if i can get this to work.We are using Siebel 7 Production in order to manage our customers, and this only runs in IE6. This is fine since we are still using XP and actually this is the reason we are using XP.I have setup a test computer with Windows 7 and XP mode and have published the link for Siebel to Windows 7 so I can just launch it from the desktop. Great!!! The issue that i am having is that we are in the middle of developing a replacement for Siebel, and this requires us to move our data to Sharepoint 2010. Within Siebel we have always used a link that opens a webpage to customer purchase history that is hosted in Sharepoint. With moving to Sharepoint 2010 IE6 is no longer supported, we will need IE7 or above.y question is, when i click on that link located within the Siebel IE6 window, how can i get it to launch in the brower in windows 7, and not in IE6 XP mode? Is there a way we can change the link to force it to open in the actual windows 7 browser?

View 1 Replies View Related

"Nivida Windows Kernel Mode..driver 275.89"?

Mar 15, 2012

I have a HP Z400 PC with an error meesage: Driver stopped v 275.89. I thought it was my monitor. I replaced the monitor. Same error. What could be my problem? The error message continues: Nivida windows kernel mode..driver 275.89.

View 1 Replies View Related

Which Driver Is Associated With Sleep Mode

Jun 23, 2011

sleep mode is inactive on windows 7

View 1 Replies View Related

XP Only Driver / Device In Virtual XP Mode

Jul 15, 2009

I got a Canon Printer which have no Vista support from official site which I wish to use it in Windows 7. I know it's an old AIO printer but sometimes the scanner comes in handy, but problem is I only get hold of XP driver for it. I tried installed the Virtual XP mode beta and I try to setup my printer, but my driver setup won't go through, it said it can't detect my printer.

So just want to ask is it actually possible to install XP-only device in Virtual XP mode so I can use the device in Windows 7 environment ? I didn't use much of Virtual PC so I am not quite sure.

View 3 Replies View Related

ATI Driver Fix For HL1 Games In OpenGL Mode

Jul 5, 2009

If you are running a ATI Graphics card and you play HL1 games (CS, Day of Defeat, ect...) here is a fix for not being able to play in OpenGL mode.

This is for 64 bit driver.

OpenGL in Windows 7 with legacy ATI Geforce x1900 GT :: Vertical Visions

I have tested this with my Radeon X1650XT and it is working perfectly in DOD and CS

It is pretty basic but if anyone needs help with this let me know.

View 0 Replies View Related

How To Install Av Mode Into Sony Driver

Oct 27, 2012

I recently purchase a used Sony VGN-CS204J the original owner upgraded the OS from Windows Vista to Window's Home Premium but she was not able to get into sony's esupport to install the AV Mode. I've entered the esupport but found my self a bit confused when i went into the "Software & Drivers tab" it wanted to know if the windows 7 was a 64bit? Another problem i find my self on I'm not sure what steps to take to properly install the AV Mode so i can get the Capture button along with the remainder AV Mode functions to work since they are currently not working.I did not see were on the esupport site it would give me download/install AV Mode?

View 2 Replies View Related

NVIDIA Kernel Mode Driver Version 186.75

Dec 30, 2009

I just bought a new desktop and within the first hour I had an error message that said, "Display driver has stopped responding and has recovered. Display driver NVIDIA kernel mode driver version 186.75 stopped responding and has successfully restored". What the heck is this? Could this be related to Windows 7 and would anyone happen to have any suggestions?

What happens is the screen goes black for about two seconds then appears with the above error message on the task bar. This happens very randomly, and maybe three to six times a day (had my computer for about two weeks). Also, two times now it has gone black and not come back! Just a little frustrated to say the least.

View 5 Replies View Related

New Realtek HD Audio Driver - No CUSTOM Mode

Sep 26, 2009

It's a pity but the new realtek HD sound driver (2.33) whilst has "preset" equalisations for a lot of options but there's NO custom setting where you can set your own equalisation. (You used to be able to set this in XP)

I'm not a big fan of "Canned" effects -- I prefer to set my own.

This was available in the XP driver --removing this in the latest Windows 7 version seems to be a BIG mistake. I suppose this is all in the modern nature of "dumbing down" everything.

I hope the "custom" feature will be re-instated in a later version.

View 2 Replies View Related

Canon LBP5100 32-bit Printer Driver In XP Mode

Oct 18, 2009

Printer is a Canon LBP5100 with 32-bit driver only.

Can I install a 32-bit printer driver in XP mode and gain the full driver usage (auto duplex) then use the Windows 7 64-bit inbuilt driver whilst in Windows 7, or is the driver shared between Windows 7 and XP mode?

In other words can I use the same printer in (Windows 7 + XP mode) but use two different drivers 64-bit in Windows 7 and the 32-bit in XP mode?

View 1 Replies View Related

Driver For Webcam Dual Mode Dsc 2770

Nov 27, 2009

I installed windows 7 and i connected my webcam (dual mode dsc 2770) at first it didn't install it because it didn't find a driver so i installed the old driver (for XP) it installed it but every time that i start the cam the windows crushed...i tried to find a driver for vista or windows 7 and i couldn't find..

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved