Kernal Inpage Error Windows 7
Jan 28, 2013
Okay, so this all started when my hard drive failed. I had tested my (old) hard drive on other computers so I know it really failed. I bought a 120 GB SSD and a 750 GB Seagate external hard drive for my computer. ( my computer is a Asus Republic of Gamers G73SW, 8 GB of ram i7 intel quad core @ 2.0 GHz) if you would like to know. , Ever since I replaced the hard drive, my computer freezes mostly while I am gaming and gives the Kernal Inpage Error. Even when I knew my old hard drive was going out soon, it never gave me that error, it would just crash, (that is the old hard dive). I went to the place I bought the new SSD and external hard drive and they told me it was probably an issue with my motherboard or operating system (windows 7 Ultimate, which I paid for) I did though have a new power jack put on my mother board about 8 months ago.. Never had any type of problem. And just FYI I do work at a computer company, kinda like Geek Squad, I am fairly new and only work with software, not hardware like this stuff. I know for sure I have no viruses or anything like that. ( checked a lot ) ran disk check's and all of that. Just don't know if my mother board is really the problem or maybe the new SSD ( which Best Buy when I asked about it told me it was my mother board, and not the new SSD I bought from them ) The weird thing is when it does crash, my BIOS will not recognize that the SSD is even there( after a crash ) my computer will not boot and I check the BIOS and my SSD will not show up, For hours sometimes... So I dont know I have asked everyone from my work and other computer shops and they all say they don't know or give different answers, only had this computer a little over a year (I love it!) but now just thinking to build my own....
View 6 Replies
ADVERTISEMENT
Sep 7, 2012
I get this BSOD whenever I leave my computer for 5-10 minutes, It just started happening.I have done CHKDSK and it came up with no errors. I don't know what info you need, I am attaching the files necessary.
View 1 Replies
View Related
Apr 28, 2012
A week or two ago I encountered the Kernal Data Inpage Error blue screen event. I had the university brains look over it then remote Dell technical support. After the technician was done it seemed to be much better. Even a bit quicker! (This computer is nearing 1 year old. Alienware M14x laptop, Windows 7)But the blue screen came again a couple times today while I was modding Skyrim. I did chkdisk, ccleaner (both cleaned and registry checked), disk defragmenter, disk cleaner, malware scan, and everything seems to have done what it was supposed to. No blue screens yet (i could try to provoke one with that same file?) but Skyrim is so much slower. Last night I was on high graphical settings with 40+ fps, now its lagging below 30fps. I did all of the above and a restart here n there.
View 6 Replies
View Related
Jul 25, 2012
Have had a home built PC now for a bout a year, i have my OS running from dual SSDs in a RAID configuration (for fast access of databases), recently i noticed my machine began crashing a few times more than i had been used to, but recently it has really started to increase in frequency. When i turn the power off to my machine and reboot, what often happens is the system freezes again just before i reach the password login screen (freezes at the screen with the windows logo). I have checked the event viewer, heres what i found after the last crash today.
View 1 Replies
View Related
Oct 10, 2011
my laptop has been crashing frequently since months ago. sometimes i get bluescreen (kernel data inpage error), sometimes it reboots automatically, and sometimes it freezes and the screen is filled with some grey/black weird horizontal lines and i have to reboot it. i had reinstalled the windows a few times but the prob remains.when i run in safe mode everything is fine.also, everything is ok when i use battery, no reboot, bluescreen, etc...but the prob comes back once i plug in...seems like the prob only occurs when i use the power?
View 2 Replies
View Related
Jul 18, 2012
my system has been running absolutely fine for the past year without issues until about 3 weeks ago. For the first time, I got a stop error about kernel data inpage error. it however could not save the dump for some reason.
my system is configured as SSD is the main boot drive for Windows and everything else (program files etc...) is redirected to the E: drive which is my RAID0. I then had the same problem about 2 weeks ago. And now I have just seen it happen properly:
Kernel data inpage error
0x0000007A
NTFS.sys
is what are the key information I can see. what does this mean? how can I identify what is exactly the problem? this is such a critical system, i cannot emphasis enough
View 3 Replies
View Related
Apr 20, 2011
I have a samsung laptop RV411. So I closed the cover and then opened it for transfer. However, I did not shut it down. So when I opened it, it turned black and it turned BSOD. It says KERNEL_DATA_INPAGE_ERROR. So I restarted my PC. Now, I cant get out of the POST. There is 2 available options F2 for setup and F4 for recovery. I pressed both and it went Please Wait... Forever! I used the recovery disk no luck.
View 10 Replies
View Related
Nov 23, 2011
I had some BSOD's, they always occured shortly after the login screen appeared. I hoped they would go away, like they did in the past, but my PC kept crashing. I didn't try to solve them, I just booted in another OS, now I booted my windows 7 again and the problem seems solved, but I am curious what was the cause of these BSOD's and I want to know how I can prevent them in the future. I attached a zip file as outlined
View 9 Replies
View Related
Nov 28, 2011
When I re�nstalled windows around 1-2 months ago I suddenly got a Kernel Data inpage error. In the attachments are all the files you will need (minidump and system health report). I had to re�nstall windows because there was an unremovable virus, before the re�stallation this problem didn't occur so that gives me a high suspicion of it being a driver problem but I can't find any drivers that need updating.
View 3 Replies
View Related
Aug 30, 2012
his past week, my little one dropped my laptop on the floor which gave me error 0xc00000e9. I reinstalled Win 7 and everything seemed to be back to normal. Once I logged on, the computer operated so slow that it lagged when typing. I went to control panel and found out that none of the Microsoft, Intel programs were listed. I then realized updates weren't turned on, so I tried turning it on, but it gave me an error. This was the same error I got with many of the services not willing to turn on. I then went to services and tried turning it on from there, but I got error performing inpage operation. After that, I tried CHKDSK L: /R, but after waiting 5 days, it wouldn't move in stage 4 of 5.
View 2 Replies
View Related
Dec 20, 2011
Yeah so I've been able to fix my dual system on both hard drives problem, but seems like my original problem still persists. Whenever I run fraps, audacity, and warcraft III (warcraft III running by itself doesn't seem to bother anything). I blue screen after 1-2 minutes of recording (sometimes it doesn't, but when it does it does for 3-4 times every time i try).
The error message I get from BSOD is kernel data inpage error, but sometimes the BSOD would just say "a process or thread crucial to the system has unexpectedly exited or been terminated". The error code is always 0x000000004.
View 8 Replies
View Related
Dec 15, 2012
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
View 2 Replies
View Related
Aug 13, 2010
How can I enable N.T. 4.0 Kernal mode on my windows 7 ?
View 11 Replies
View Related
Jul 20, 2012
Black screen then lag then goes right to normal how to fix?Im using NVIDIA sorry don't know how to give in my details about my laptop bu
View 9 Replies
View Related
Apr 1, 2012
I read a few forums about this issue but mine's different. It doesn't crash or display any error while gaming. It happens when i'm on the desktop exploring. If don't do anything it wont display the error, however, when i start to right click on desktop, it flickers and displays the error "Nvidia Windows Kernel Driver mode driver has stopped responding and recovered" something link that. This also happens when a window is active like when i'm on the Control Panel Window (don't know with other windows, haven't tried yet), It flickers every 10 - 30 secs and display the error. After a few hours of researching and troubleshooting i think finally fixed it by putting the "Peformance Settings to Best Performance". I don't know what caused this. It didnt happen to me before. My Peformance settings was always set to Best appearance until now. Anyone knows the fix to this error? I don't like the appearance set to Best Peformance, it looks like Windows 98 If you experience similar errors like mine, try setting your Performance settings to Best Peformance and post comments here if it works[CODE]
View 2 Replies
View Related
Sep 22, 2009
I'm experiencing a problem with my NVIDIA Windows Kernal Mode Driver Version 190.62.
The problem has crashed my computer a number of times, any help would be appreciated.
View 9 Replies
View Related
Oct 20, 2011
Windows 7 64 bit with a GTX 460 graphics card (desktop) an im getting an error were my screen flashes to along and digital back and forth and accationaly the computer will reboot and say DirectX 9 could not be initalized when i have DirectX 11 or when the screen flashes it will say windows kernal mode driver not responding and has recoverd
Specs:
Windows 7 64 bit
GTX 460 Graphics Card
27" Samsung Monitor
16GB of DDR3
165GB Hard Drive
ASUS Motherboard
Amd Phenom 3.01GHZ
overclocked to 5.00GHZ
View 2 Replies
View Related
Jun 4, 2011
How can I fix the run-time 75 error - path/file access error in windows 7?
View 1 Replies
View Related
Apr 18, 2011
Just installed windows 7 about a month or so ago, running great, only every now and then if my system is idle and I wiggle the mouse to make it come back on , it just reboots automatically[CODE]
View 2 Replies
View Related
Feb 19, 2010
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
View 9 Replies
View Related
Oct 25, 2012
I help network and run some office locations that run two or more computers. One computer is setup as a server with specific software on it, and another or more computers are setup as workstations.When attempting to connect to a workstation computer in the network I receive the error message:Network Error Windows cannot access \ComputerName Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Error Code: 0x80070035 The Network path was not found Here are some details:I'm trying to connect to a computer running Windows XP SP3 from a different computer running Windows 7 Pro Sp1 (both machines are 32-bit). Share folders are setup correctly giving everyone and administrators full access. I'm trying to connect from an administrative account created with the same name and password on both computers. Both computers have the same subnet and similar IPs (IE, one IP is 192.168.1.1 and the other is 192.168.1.2). Both computers are on the same workgroup name. Enable TCP/IP is setup on the network adapter (versus being "Default"). TCP/IPv6 is disabled Windows Firewall is disabled on the WinXP computer, and turned off on the Windows 7 computer. Computer Browser, Server, SSDP Discovery, and TCP/IP NetBIOS Helper services are all set to Automatic startup and started. Both computers have other software anti-virus/firewall that have been disabled (for testing purposes). I can browse the shared folder on the Windows 7 computer from the WinXP computer without problem, and don't get the above error on WinXP. Other interesting facts are that I can see the WinXP computer when opening the Network browser on the Windows 7 computer, but I can't see the Windows 7 computer in the Network Places browser on the WinXP computer. Also, I can edit the HOSTS with the computer names/IPs to stop the above error message, but it's really only a bandaid to this problem.I have other services that broadcast from the Windows 7 computer via the network adapters based on the LANA number (which I have correctly setup). These broadcast information and let software on the WinXP computer work correctly. These broadcasts are not getting through as if the LANA number was setup incorrectly, even with the HOSTS file edited.
I would like to find a solution without having to edit the HOSTS file. I've been reading forum post after forum post (google search). What's frustrating is this is not the only environment I have something like this setup (Windows 7/WinXP mix), but this network is the only one I'm having issues with. I've Looked over every concievable network setting between two identical mixed OS locations and found nothing different. Yet the problem persists. The Windows 7 computer was just upgraded to Windows 7 from WinXP Also. The image used to do the upgrade is the same used at another location I compared this computer to.
View 9 Replies
View Related
Dec 15, 2012
seeing as it had infected my services.exe, part of the fix was to get a new copy of it, or something around those lines; this will come in to play later, I think. Anyway, its been a LONG time, my last update whenever I try running windows update, it runs for a bit and tries to receive the updates, but then stops and displays a message saying it failed to update, and gives me the error code of 80246008. I've looked this up, and I see that it possibly has something to do with the background intelligent transfer service.
View 8 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Nov 15, 2011
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
View 2 Replies
View Related
Mar 12, 2011
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies
View Related
Mar 7, 2012
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
View 1 Replies
View Related
Dec 1, 2011
Recently whenever I've used an .exe installer I'll get an error as soon as I click start after choosing the directory, in the picture example I include below, it's of SA-MP, but it happens with any installer I try and use. Installers have worked previously, it's only recently it's stopped working.The error is;Error opening files for writing?
What I've tried;
-Full system scan with Comodo AV.
-Revealed hidden files and folders.
-Run the installer in both compatability (Even though it does work on Windows 7, and as an Administrator).
-Also done the scan on CMD (can't remember exact command).
Brief Info:
OS: Windows 7 Home Premium 64bit.
View 9 Replies
View Related
Jun 19, 2011
I am trying to run a certain program and it worked previously for a few days, and then today all of the sudden its giving me this error.Is this a windows thing I can try and fix? Or is it program specific (this program doesnt have much support unfortunately)
View 3 Replies
View Related
Dec 17, 2011
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies
View Related
Dec 21, 2011
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
View 14 Replies
View Related
Apr 5, 2011
I have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
View 11 Replies
View Related
