I'm quite desperate that on my new super-desktop I get tons of restarts and BSODs on Windows 7.
I get the following information on WinDBG:
MODULE_NAME: win32k
FAULTING_MODULE: fffff8000280c000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc5e0
READ_ADDRESS: unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPoolCodeStart
unable to get nt!MmPoolCodeEnd
fffff900c08fdcf0
want to rerun the jcgriff utility after you fix the BSOD to see the state of the system, but the old Dbg files are still being picked up.How are old WinDbg files cleared after fixing the BSOD?
I am experiencing BSOD on nearly every boot or restart. Once the computer has been up and running for about 10 minutes, after perhaps two boot attempts, I seldom BSOD until I boot up or restart again. Sometimes the BSOD occurs before windows even fully loads, and sometimes it occurs a few minutes after the desktop appears.I have attached everything requested in the posting instructions (I think). Additionally, I have included the last four dumps
New PC, and I'm getting BSOD randomly when the computer is idleing followed by a restart, before 11th of Dec there used to be 5 or 6 restarts a day, but after that time I updated windows 7 and now I'm getting 1 or 2 a day. I ran memtest for a 7 pass test and showed no errors. My Windows 7 is - x64 - Ultimate installed by myself. - Full retail version. - Age of system (hardware)? 1 month old. - Age of OS installation? 1 month old.
Windows 7 - BSOD 7e while system restartWindows 7 Home Premium, 64bit (installed by recover CD ).
System is just new installed. Antivirus is Norton my system specs: CPU:I7-3610QM 2.3GHz DDR3 8G HDD 1T Display :intel + NVIDIA GeForce GT 630M optimus technologyChief river platform
I've been trying to troubleshoot my BSOD issues the last 2 months but I'm not sure what to do from here. During restart my computer will BSOD; sometimes restart 5~6 times will BSOD, sometimes 2000~3000 times not happen, always seemingly random but once happen ,next time will continuous BSOD. A few things I've already done:
It is windows 7 and runs very very smooth (since it's a gaming computer). Today i decided to watch Naruto shippuden so i searched it on google went to the link, found the video and clicked play. 5 seconds after i hit Play my computer shut off. The system automatically restarts and i Select run windows normally again it restarts and gives BSOD. I can run windows in Safe mode, and safe mode with networking. When it restarts i hit run windows normally, it runs everything is fine. The boom BSOD.
I am getting a BSOD during hibernate, restart etc. The problem is fixed by restoring the laptop to factory state but after a month or so the problem starts again.
I have run the diagnostic tool and uploaded the zipped file.
i just save my project and then after a few minutes i got BSOD i read "ntfs.sys" then i restart my computer and then my system won't boot, displaying in monitor is no cable connceted, but when i check it's ok.
today I have ran into a troublesome problem. When I turn on my computer, after 10-20 minutes it would BSOD then crash before I even have a chance to read it. After it restarts it will said that it is unable to boot and select a boot device. When I go into the BIOS the moment it restarts my hard drive would not appear there, but if I turn off the computer and turn it back on it would appear again as the selected boot device, but will soon later crash once more.
everytime i wanted to restart, it came up with this BSOD SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION ran memtest for 7 passes with no error seems like all my recent bsods are memory related. i dont have any spare rams to try.
In the past days my laptop shutdown unexpectedly only with uTorrent opened... I thought it was from high temperature but now I just don't know what is it because I don't think the laptop is too much warm and it not doing any heavy task when this happens.
I tried posting on the Windows 7 forums, but I seemed to have gone nowhere fast with them over there. Lots of page views, but not a single piece of help or advice and quickly buried under tons of other BSOD threads. So I'm hoping someone here could point me in a direction and help narrow down what's going on and what needs to be done.
This BSOD has been happening more regularly, sometimes after 30mins, other times after a couple of hours.If I try and restart it crashes shortly after Win 7 logo appears.Unless I disconnect the power for at least 15mins, it won't restart Windows - just re crashes.Have attached the dump and sysdata files - note that the two files are not always written.
I've been having this problem for about one year now and I decided it's time I sought online help. My PC is about 2 and a half years old and the current windows installation is roughly 2 years old (windows 7 professional x64 from microsoft academic alliance).Crashes/freezes happen at random times (I had gone about a month with none) and not when a particular program is running. I've attached minidump files and system health report.
My computer has been going through this phase upon restart where it will BSOD around every 30 min for a couple days, then all of a sudden will be fine untill the next restart. I am running a ASUS laptop with Windows 7 Home Premium that I have had for about 2 years. I uploaded the latest .dmp file, I can upload more if necessary.
I am totally new to this and am really confused. About maybe a week ago I started having BSOD, plus Windows wouldn't restart after going into Sleepmode, and when I tried to Shut Down it would bring up the shut down screen then just keep "shutting down" with out ever shutting down.
So I read some internet stuff and "Reinstalled Windows 7" and seem to still have the issues.
I dropped my laptop so hard few weeks ago. After that, it worked unstable. BSOD / freezed screen happened so many times. Sometimes, it could not restart, look like the computer was locked.I tried to re-installed windows, but the problems are still there.
My laptop is Sony Vaio VPCEB33FM Windows 7 Home Premium 64bit
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
After restart it sometimes does not find the primary hard drive. The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all. I did a checkdisk and it turned out clean.
I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
I have Win 7 Pro on a Thinkpad T510 and I updated the Avast engine. It asked for me to restart the computer. It progressed as far as the "Logging off" screen an stopped. I have manually stopped the computer with the power button but when I power it back on I go to the same "Logging off" screen. I have a restore point but can't get to it unless I can start up the computer at least in Safe Mode. Unfortunately I don't have a boot disk. After years of computing this may be the first time I have needed one.
Bit of a weird one this. My PC won't restart. When I try to get it to restart, it will stay on the black screen right at the very beginning but with nothing else happening; no disk activity or anything. The only remedy is for me to switch it off via the power button and then switch it on again - it boots fine from this. It shuts down absolutely fine, and there are no other problems with my system at all. It's actually more of annoyance than anything else as there don't appear to be any other adverse effects at all. I am guessing it's a mobo issue, but really, I'm stumped.
my pc with a GA P35 dq6 motherboard with a 2.7 CPU intel celeron dual core with a radeon 5850 graphics card works fine until you restart. when you do a reboot or restart, the system shuts down and lights up then shuts down in a loop. it does not turn on. but when you shutdown and turn it on it works fine. only when you do a restart
I installed windows 7 on a brand new HDD,i updated all the drivers of chipset etc,the computer runs fine,but the only problem is that when i try to make it restart the screen goes black, the keyboard and mouse also,but the fan and the pc keeps running, i tried to set the bios to default but nothing,so i tried to restart it from the safe mode,from the same mode it loggs off ok but when the shutting down screen comes it freezes there,so i am guessing its the same thing happening to the normal restart. I tried uninstalling all the newly added programs but still the same thing,i tried resseting the ram but still the same
I've created an application like windows 7 toolkit and i need to restart all the process including explorer.exe(and all its child processes) excluding the application i've created.is there any batch commands or batch file that would restart all the processes running on my laptop except the one I've created.
I have windows 7 ultimate 64-bit on HP DV4-1199ee. The battery is connected and it is working on power is plugged on. When I leave the laptop for long time, I found the the laptop has restarted. This tell that the computer restart instead of sleep.
I have installed windows 7 on a very old HP compaq Evo and it works perfectly but only if I switch OFF and ON, if I have to restart it just don't switch back ON it gives me a black screen.
So I've been messing around with varrious drivers to try and get "RAGE" working and to make this tumultuous process more agravating I've somehow inadvertently uninstalled my USB drivers as well.This wouldn't be an issue, except that my computer has no PS2 ports.I used "GPU caps viewer" to check my driver version as I'd not noticed a change in my gaming performance and I was unsure if the 11.10 preview 2 drivers had been installed. "GPU caps viewer" said i was still running 11.8 which is what I had before I tried changing drivers last time. So I guessed that my drivers had not changed dispite the fact i uninstalled/reinstalled using the guide on the AMD /ATI site.So on a bunch of sites I saw people were using "Driver Sweeper" to get rid of the registry files and hidden bits of the ATI/AMD drivers. I used this application, it found; stuff removed it and then asked if i wanted to reboot. Which I figured after Uninstalling the Drivers and this program tooling around it was probably required sooner than later to finish the uninstall.At this point the drivers are "uninstalled" and the generic windows driver is working because my resolution/aspect ratio is stuck at 4:3 and wont go 16:10/16:9.AND more importantly my USB devices were all still working.I restart the computer and It loads windows and I try to type my password and nothing happens, The mouse cursor is in the middle of the screen and I can not move it, and there are no lights on my keyboard. The optical sensor in the bottom of my mouse Also does not light up.I restart again, and check the BIOS, all USB ports are enabled, so I try booting in to safe mode. I can use my keyboard to work in the BIOS, and to select "Safe mode with networking" (vs safe mode with out)When safe mode loads, same issue. No power to USB devices.I tested a bunch of devices; xbox controler; USB memory stick, external HDD etc. and none work.I don't know what to do; the mouse and keyboard work in the recovery partition installed on my HDD, but I really don't want to lose all that data. Ill probably end up using a live CD of linux to get my files and then format the PC if I can't figure out how to fix this.
The last few times I have restarted my windows 7 PC everything goes according to how it should, the desktop appears in under two minutes but nothing will work. I can click on any icon and nothing happens then after about 20 minutes evey programme I clicked on earlier will open one after the other. after closing these progs the comp performs normally, I noticed that even Ctrl alt and delete does nothing during this period of disobedience, anyone had this before? It's a hi-spec machine with 4 gigs of mem
it is a week or so that I have a problem with my PC.When I shut down the PC, instead of turning off, he restart.Before restarting, for a brief moment I can see a BSOD screen, but I cannot read it.After the PC restart, I see a small window telling me that the PC was restored due to an error. [code] A week and a half ago, I installed two add-on cards ( a PCI USB card and a PCIE USB 3.0 card), and with the PCI I has troubles to make it run, so I uninstalled it and I sent it back to the store.With the USB 3.0 instead everything was fine.I dont know if this is related to the problem I have right now.
