i recently did a clean install of 7077 X64 replacing 7068 now for some reason i have two windows 7 listed in boot manger, the first one is the new one the second doesn't even work says boot manager is missing or something along those lines, so i formated and installed again same problem, when starting up after the first start up it takes for every to actually boot it just sits there after the win 7 little colors swirl to make the windows emblem
iv never had this problem before, all my drivers are up to date everything.
when i did an upgrade from 7077 to 7100, my grub menu's completely gone no more is it there. I know that partition's there it's just for some reason 7 decided to say oh no no more will you have the option to boot to linux probably a plan by M$ to screw over people who jsut want to do an "upgrade" into doing more work but oh well. So what's the plan now? Do i have to do a complete reinstall of ubuntu to get my grub back or is there a simpler fix?
Not sure if anyone's reported this yet, but I did a clean install of 7077 on my backup computer and anytime I start an application download and select "run" from the download menu, it downloads the program but will not start it, I have to go back and save the file, and run the .exe from there.
I just made a clean install of windows 7 build 7077 and it worked perfectly for 1 or 2 day but recently whenever I open opera or chrome or ie the taskbar and pretty much every thing but the navigator freeze until I close the navigator or after 5-10 min.
I have not found any error report relevant, nor process going crazy in term of cpu,memory,disk or network utilization. I have tried deactivating firewall, antieverything, windows firewall and defender, xfire, msn, aero.
Weirdly µtorrent, newsbin pro, msn, vnc doesn't freeze everything. I suspect the issue as started after running ccleaner but I don't know how to undo what it did. I have found hundred of people having about the same problem on XP but none of there solution worked for me.
Installed the update (not a clean install). After about 1.5 hours, everything was back up and went into 7MC. Asked if I wanted to use previous settings, I said yes. Get a Playtime install screen, then get error (although playtime was already installed). Went to the next screen and get my PID key request, type it in and says error (I know which keys to use, installed it about 5 times now).
Try several different options as far as uninstalling playtime, try going through 7MC setup, continue to get the error.
My question is, will the PID registration automatically fail if Playtime is not installed. I'm worried that I now have a useless PID as some others have reported. Installing Windows Vista Home Premium from the reinstall disks hoping I can get the PID to work.
When upgrading from 7048 to 7077 the installer freezes on the last step (copying files and settings) at 35% every time I've tried it. It suggested removing ATI Catalyst Install Manager and Control Panel, which I did, but it still hangs (although this time at 47%). I have tried several different configurations (with/without CCC and Install Manager, do/don't go online for updates, etc). Every time I have to force restart the computer and it will begin to restore the previous version.
I've been using seven (32bit version) for quite a while now on my laptop ( MSI GX710PX - amd turion64 x2, ati hd2600 (512MB), 250 GB,2 gigs of ram). The first installation did the problem mentioned in the title of the topic after i installed Kerio personal firewall - i didn't know what to do, so i just reinstalled windows.
But now it happened again:
The comp was running for 3 days, i turned it off @ around 2:00 am, then turned it on at 8:00 am - for the first time i could login, and i even see the taskbar and the background, but the icons never showed, i couldn't click anything on the taskbar either, ctrl+alt+del did nothing, so i had to restart it manually.
The login screen showed up, i entered my password, but it never made it to the desktop, it just got stuck like that, the HDD wasn't spinning or anything - restart - in safe mode it boots up normally , so i uninstalled a few recently installed programs ( mkvtoolnix and alike ), but after restarting it got stuck at the login screen again.
Now normally i would just reinstall windows, but after two months it has too many programs - lot of time to install them again
So i thought i'll ask here for help! The notebook has XP as it's main OS, seven is installed on a virtual harddrive (30gigs).
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered) Path: Windows Windows Device: Partition=C: (476938MB) Name: Windows Recovery Environment (recovered) Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found: No OS files found on disk. Repair action: Partition table repair Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
I upgraded to Win 7 Ultimate from Win XP Pro after my OEM disk picked up a few more scratches than it needed.During a re-installation it partially installed the windows XP setup with an error message of 'HAL.DLL' missing.I believe the residual setup loader is causing problemS.My PC insists on trying to boot from CD/DVD regardless of what I select.If I select boot from CD/DVD with my new Windows 7 disk I get the SAME message as if I didn't select boot from DC/DVD: Windows failed to start. This could be from a recent hardware or software change.
1.Please insert your windows install disk and click restart 2.Change language setting and click next. 3.Click repair... etc.
If you don't have the disk contact admin....ect.
File$LDR$ Status 0xc000000f info: Selected entry not added/ application is missing or corrupt. Enter Escape. Escape = reboot to error listed above... Enter = OS choice menu with:
1. 'windows 7' 2 'older verion of windows'
I select the ' older version' and the system gives me the same listed above error...I select 'windows 7' and, well.... here I am, posting this thread from my PC, Windows 7, updated, gageted and all running smoothly...Hibernate sometimes boots and sometimes shows the same error.....Start menu 'Shut down' and 'Restart' also don't work on the odd occasion....I researched and downloaded EasyBCD to delete the 'older version of windows' but it appears to have only 'deleted' it from Windows 7's 'eyes' because ultimately the thing is still showing on my OS choice menu and is evidently causing a few hiccups.
I have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
I'm currently running Windows 7 Home Premium 64 Bit. I have two hard drives in this PC. One is an Intel SSD (on which my Windows 7 is installed and is the active partition), and a 1TB hard drive. This computer has been up and running for 1 1/2 years now without any issue.
Yesterday I updated Norton and ran its Registry Cleaner and might have started this problem.
So the problem is when I boot my computer, every thing is normal until before the Windows 7 logo screen. Prior to today, it just goes there without any issue. But today, I received an error: "CD ROM Boot Priority Error - No medium". I have an Asus motherboard, and it has the F8 option to select boot device. So I reboot my computer, hit F8 and select my SSD, and Windows 7 is able to boot correctly and without any issue. Then I check my BIOS to make sure the boot order is correct and it's set to
1-SSD 2-HD 3-CD Rom
But everytime it would display me that error. Yes, I have a workaround by pressing F8 during POST and I'm able to boot to Windows 7. But I'd like to get rid of this error. I ran the Intel diagnostic software on my SSD and the drive is okay and healthy according to it.
I have been trying this for some time now, but I cannot get my computer to boot from my USB drive. I have used "Bootable USB Drive Creator Tool" to make it FAT32 with the specific files I need on there. My main goal as of right now is to get my PC to boot from USB and have no other HDD in there besides the one I want to use to format for my Xbox 360 and use an the add-on instead of purchasing a new 250 GB HDD. It is a WD2500BEVS... I have tried using different ports and was open to a suggestion of different software to try or something else. When I restart my PC, I press F2 which is my boot option and click USB and in my BIOS it is set to start from USB>CD>HDD.
Is there anyone here who can help me figure out a boot script gone awry?
It's for an XP pro machine but for some reason it has Win 7 (recovery) on the menu. I also have Ubuntu on it and have that sorted out. The Xp will not boot and I get a phantom OS on my Windows Boot menu.
I would like to know what a normal Xp Boot config (not sure what you call it) looks like. I also would like to know how I could go about changing mine so the Win 7 isn't coming up. I DO have Windows 7 but that is on another lappy of mine.
What is strange is I don't remember even trying to install Win 7 on this laptop. I don't sleepwalk or drink so rule those out guys!
Windows 7 has been working great for me for the past couple of weeks. This morning however, something tragic has happened. Last Night I shut down my computer like I always do, nothing seemed to be wrong. But when I started it up this morning I got a very pecuiliar error.
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER - or something to that effect.
I found my Windows 7 disk, inserted it, and began the repair process. However, there was still something wrong. Windows 7 could not find my main Drive at all. The drive where I installed Windows 7 where all my data is and where I stupidly did not make a backup.
I tried doing a system restore, but it could not find my hard drive. I tried doing a system repair with the installation disk, but it could not find my hard drive. I tried to do a complete reinstallation, hoping it would find the disk formattable, but it wasn't even listed...
I've opened up my computer to make sure everything is still connected (though I don't see what could have posisbly knocked out a wire, I mean - I don't live in an earthquake zone and I'm pretty sure I killed all those trolls in my basement...) and I'm about to try booting it again.
As odd as this is, I'm making this post from my ps3 so I'll be keeping this open as I attempt to solve this problem. If anyone has had a similar problem or just would like to leave me some advice, since obviously I'm not as computer savvy as I would like to think I am.
I have recently tried to boot Windows 7 Ultimate on my machine but while trying to boot it, it gives me an error Saying. Boot error Code : 5. I have no idea why this happens? could somebody explain to me, and what information about my system would i have to provide so that you may know the reason.
I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: BootBCD"
I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive �800 paperweight
To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the hard drive is screwed but there is clearly a problem with the boot sector and I have no idea on repairing it now.
month old Toshiba laptop.On boot got file BootBCD, an error occurred while attempting to read boot configuration data.computer came with no restore disk.son has been in hospital so it wasn't used recently.odd thing,wasn't able to access safe mode.downloaded Windows 7 disc hoping to repair but wasn't able to do anything with disc.wondering if it's hard drive related
I have a problem thaI am hoping someone has a solution to. I had previously installed Windows 7 RC on my computer. I then installed a SATA RAID PCI card and also installed a second HD. I attempted to install Vista on the second HD, but had problems and uninstalled it. When I try to boot up the boot up screen gives me the option of Windows 7 or setup. If I choose Windows 7, there is no problem. If I do not choose and the boot up continues in the setup mode I get an error message on the blue screen of death.
The computer shuts the start up in order to preserve the computer. It instructs me to remove the PCI card and HD and reinstall them. I have done that. I undertand that the boot up files fromVista are still on the the HD in a hidden folder. How do I correct this situation? Can I re-install Vista on the second HD and achieve the desired result? I formatted the second HD after the blue screen, but should I use a drive scrubber and remove all traces? If you know or believe you have an answer, I hope to hear from you.
Recently got some new Dell XPS 13 laptops. They're great, minus the absence of a NIC for easy network booting. After many different attempts to get the thing booting an ISO image burned to a bootable USB drive, I went out and bought an external USB CD drive. I performed the following steps to transform one of my .wim images for 64-bit Windows 7 Enterprise into an ISO: How to Convert a WIM File to an ISO File | eHow.com, I can begin booting from the CD. However, when it gets just past the "Windows is loading files" screen (I don't get to any part of the initial Windows 7 setup), I get the good old "Windows failed to start" message: Windows failed to start. A Recent hardware or software change might be the cause.
