Build 7077 Stuck At Login Screen
Apr 21, 2009
I've been using seven (32bit version) for quite a while now on my laptop ( MSI GX710PX - amd turion64 x2, ati hd2600 (512MB), 250 GB,2 gigs of ram). The first installation did the problem mentioned in the title of the topic after i installed Kerio personal firewall - i didn't know what to do, so i just reinstalled windows.
But now it happened again:
The comp was running for 3 days, i turned it off @ around 2:00 am, then turned it on at 8:00 am - for the first time i could login, and i even see the taskbar and the background, but the icons never showed, i couldn't click anything on the taskbar either, ctrl+alt+del did nothing, so i had to restart it manually.
The login screen showed up, i entered my password, but it never made it to the desktop, it just got stuck like that, the HDD wasn't spinning or anything - restart - in safe mode it boots up normally , so i uninstalled a few recently installed programs ( mkvtoolnix and alike ), but after restarting it got stuck at the login screen again.
Now normally i would just reinstall windows, but after two months it has too many programs - lot of time to install them again
So i thought i'll ask here for help! The notebook has XP as it's main OS, seven is installed on a virtual harddrive (30gigs).
View 8 Replies
ADVERTISEMENT
Apr 14, 2009
In Windows, I only have limited screensavers. Is there a way to activate them all?
P.S. Screenshot attatched of what I mean...
View 8 Replies
View Related
Apr 13, 2009
I just made a clean install of windows 7 build 7077 and it worked perfectly for 1 or 2 day but recently whenever I open opera or chrome or ie the taskbar and pretty much every thing but the navigator freeze until I close the navigator or after 5-10 min.
I have not found any error report relevant, nor process going crazy in term of cpu,memory,disk or network utilization. I have tried deactivating firewall, antieverything, windows firewall and defender, xfire, msn, aero.
Weirdly µtorrent, newsbin pro, msn, vnc doesn't freeze everything. I suspect the issue as started after running ccleaner but I don't know how to undo what it did. I have found hundred of people having about the same problem on XP but none of there solution worked for me.
View 8 Replies
View Related
May 2, 2009
When upgrading from 7048 to 7077 the installer freezes on the last step (copying files and settings) at 35% every time I've tried it. It suggested removing ATI Catalyst Install Manager and Control Panel, which I did, but it still hangs (although this time at 47%). I have tried several different configurations (with/without CCC and Install Manager, do/don't go online for updates, etc). Every time I have to force restart the computer and it will begin to restore the previous version.
View 4 Replies
View Related
Jan 16, 2012
I am running with windows 7 extreme edition x64 but now it stuck on one update file. When I shut down computer or it ask me to restart every time it take update of the same file and after restart, my windows again downloading the same file and a strange (Test Mode Windows Build) thing is appearing just right down corner of the task bar where the digital clock is been displayed. This is the only file which is taking update every time I restart my Workstation. I am giving info of file that is causing update again and again: Update for Windows 7 for x64-based Systems (KB2607576).
View 6 Replies
View Related
Jan 2, 2013
We had internet trouble and got that fixed only for the desktop to keep coming up in the "other user" login screen?
View 1 Replies
View Related
Oct 19, 2011
Ok so today o decided to uninstall alienware my colors or something like that. Downloaded it from dell website. Its for windows 7 the name of was breed. So after i uninstalled it my icons arrows were gone it was the app icon and the arrow that goes with it was like a page and two blue dots. I couldnt acess any folders.no control panel. It was all blabk. Desktop appeard fine except for the arrows were missing on tje icons. It asked me to restart so i did.it went pass the windows logo loading screen. Then came the welcome screen.it prompted please wait with the circle. Problem was after that. No login or anything. No password on my account so it should have loged in. It doesnt hang or anything. It just stays on that screen. Only options i have it restart sleep and shutdown aling with that button for speech keyboard and someother things. I tried safe mode no luck same thing doesnt log in. Tried restore to previous known state. Nothing. I cant acess repair option as i have no windows 7 64-bit cd. Only 32-bit cd. Also it doesnt show my account.
Mb-asus p5g41t-mlx3
Cpu-intel pentium d 925 3.00ghz oc @4.00ghz
graphics-xfx radeon hd 6770 1gddr5 oc
psu-corsair gs 700
Cooling-corsair h70
Memory-corsair ddr3 1333 4gb 2 sticks
Hard drive-cavair 250gb hardrive
View 4 Replies
View Related
Jan 27, 2012
Everytime I start my computer it goes into startup repair searching for problems. I tried going to F8 into safe mode but it goes bac to searching for problems in statup repair. Is there any way I can bypass it from going to startup repair page and go into windows.
View 3 Replies
View Related
Jul 25, 2011
when I was playing a game and it crashed on a loading screen, I then could only boot into windows extremely slowly so I knew something was wrong. Since then I have booted into safe mode and done a virus check and it found nothing, I had then done a start up repair multiple times and for one reason or another the system would then reboot just as the login screen is loading. I have recently de fragmented the drive externally and run a slow disk check which found nothing. I've launched start up repair again which says it's unable to fix the problem and I can't boot into safe mode because it'll reboot. I should also mention I was having problems with the drive a few weeks ago where I was getting different error messages before booting but I managed to sort that out. If a solution can't be found it would be safe to say the drive is failing. Here is the bsod when I disabled automatic rebooting along with the startup repair error.
View 4 Replies
View Related
Jun 4, 2011
I just upgraded to windows 7 (rather a repaired version from windows 7) and why setting up, I was prompted to chose how to connect to my network. My computer has now been stuck in this pre-login network settings thing for over an hour now. I finally figured I'd cancel and fix it later, but there is no cancel. So i restarted my computer, only to have it start exactly where it left off. I was sure to completely turn off my computer, then it started over when I turned it back on. After unplugging my internet, it skipped the process.*
View 1 Replies
View Related
Apr 12, 2012
I'm using Windows 7 Pro. I have remove the login pw in my user account now I do not need to do the login and able to use the computer right away. But I found I am using the computer as a user not administrator. How can I skip the login screen and go straight into desktop as administrator.
View 1 Replies
View Related
Nov 26, 2011
I have an RDP Server on a windows 7 ultimate 32 bit and i would like to be able to use another system login screen to connect to this server. As in when i turn of display last local users, so that if i was to enter XXX into the username and XXX into the password and it will connect Although i wouldnt mind being able to set up roaming profiles between these systems either.
View 1 Replies
View Related
Mar 28, 2012
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
View 9 Replies
View Related
Dec 15, 2011
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies
View Related
Sep 2, 2012
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies
View Related
Nov 12, 2011
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies
View Related
Mar 27, 2012
Okay so lately I've noticed that my PC isn't displaying the BIOS splash screen anymore and skips straight to the Windows login screen.It didn't really bother me until today when I wanted to boot into Ubuntu and I couldn't select which OS I wanted to use.I'm pretty sure the problem isn't the BIOS itself since I unplugged all the peripherals except the speakers, removed all the RAM and the BIOS did beep repeatedly. And given enough time, I can boot into windows (and only windows ).Apparently people have had this problem before and all the solutions I've read such as "Press 'del' to go into your BIOS!" really doesn't help since I can't see anything in my BIOS menu.The only solution that made sense to me was that my CMOS battery could be dying. I haven't changed my rig since I built it in 2009. The only significant event that happened recently might be that Windows updated itself.
-PC doesn't display BIOS splash screen
-Can't see messages displayed by system
-When windows does bootup, everything runs just fine
-Haven't changed rig for ~3 years
View 9 Replies
View Related
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Mar 18, 2012
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
View 3 Replies
View Related
Nov 16, 2009
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies
View Related
Apr 11, 2009
I accidentally right clicked on a jpeg that was saved to my desktop and chose "print". Instant blue screen of death. And of course I tried it a few more times and same thing. Is this a known glitch or just my Presario V2000?
View 3 Replies
View Related
Mar 24, 2012
I just put together a brand new PC. I used the HDD from my old PC in this one, it has Windows 7 32bit installed on it.I start up the PC, everything sounds fine, I hear one beep, the BIOS screen pops up. Then, I get to the "Windows Error Recovery" screen. If I select start windows normally, I see the starting windows screen, then a blue screen pops up with the usual "problem has been detected...shut down to prevent damage" stuff. The technical information it gives me is: Quote :*** STOP: 0x0000007B (0x80D86A58, 0xc0000034, 0x00000000, 0x00000000)
View 3 Replies
View Related
Nov 6, 2012
I'm running Windows 7 Home Premium.As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.Nothing is on my screen except a faint glow indicating that it's active.
View 2 Replies
View Related
Oct 4, 2012
I got a bad virus on my computer about a week ago. I decided to use my windows 7 installation disc to reformat my disk drives and reinstall windows 7. The installation goes smoothly and I am able to login to windows. But after I install drivers and updates, then restart the computer, I get the "starting windows" screen with the swirling logo. I can hear the chimes that sound when I get to the login screen, but the screen is black. I can make the cursor appear by moving the mouse, but I cant do anything else. I never created a system restore disc, so I dont have that to help me.I have done some tinkering and will tell you what did not work so far.First, like I said, I used the windows 7 install disc to reformat my disk drives. Then, I reinstalled windows. I installed the updates for my graphics card and motherboard. When I restarted, I got the black screen. I restarted the computer and used F8 to do a system repair. This detects no problems. I tried to use the "startup repair" on the windows installation disc. This does not recognize a problem. I have tried it several times. Same result. Next, I tried to use the repair options on the windows install disc. I went to command prompt and typed in: bootrec.exe /fixmbr, bootrec.exe /fixboot, and bootrec.exe /RebuildBcd. (An interesing note: When I used the RebuildBcd command, it said that it detected 0 windows installations.) After the first time I did that, I tried the startup repair and got my first and only error message: "Startup repair cannot repair this computer automaticaly". I checked the details and it said "Problem event name: StartupRepairOffline". If you need the rest of the details, I can provide them. But I tried the repair again, and there was apparently no problem. Yet, still got the black screen.I then reformatted again, deleted both drives, and made new ones. I tried to install windows again, and I can get to my desktop.(One thing I noticed is that before I install updates, the computer is saying that my monitor is a "Generic PnP monitor on standard VGA graphics adapter". I dont know much about computers so this may be normal before installing the graphics card updates.)This time, I was connected to the internet and tried to install the system updates first. After all 120+ updates installed, I restarted and got the black screen again.I decided to use the install disc again to reformat, delete, and recreate the hard drives. This time I tried to install windows on the second hard drive (Disk 1) Again, the install went smoothly. I started installing the graphics card and motherboard drivers, but this time it told me that my disk drive D needed to be formatted before use. I reformatted it (this took MUCH longer than the format option on the install disc), installed the drivers, and restarted. I still cant get into the login screen. Finally, I used the install disc to reformat, delete, and recreate the disk drives. This time I installed windows on the first hard drive (drive 0) again and got to the desktop. Now I tried to install the motherboard drivers first, then restart. I did this and was able to restart and get back to the desktop. Next, I installed the graphics card dirvers, and then restarted. Black screen again.
Here are my computer specs:
Windows 7 64bit OEM
EVGA P55 FTW motherboard
EVGA GTX570 graphics card
Intel i5-760 processor
Intel patriot 8gb ram
View 14 Replies
View Related
May 19, 2009
This is a problem that sometimes crops up with various laptops for reasons I can't understand.
I have ONE laptop where typing input sometimes causes the cursor to jump randomly all over the place. This is UNPREDICTABLE so making typing input such as a Word document totally impossible without looking 100% at the screen.
This behaviour I've seen on a few laptops with various versions of Windows.
However Disabling the Touchpad (I hate those anyway) seems to fix it.
The Generic synaptics touch pad driver seems to work for most laptops I've seen which show this behaviour. Use this driver to disable the touchpad and the problem goes away. There's a 64 bit version too.
View 1 Replies
View Related
May 2, 2009
I cannot get the screen saver to start automatically after the time specified.
View 9 Replies
View Related
Apr 24, 2009
so can i mount from 7077 and just run the install? or does it need fresh install?
View 1 Replies
View Related
Mar 16, 2009
If you really dislike the pale blue logon screen with that ridiculous "Peace Dove" (ZAP it someone) please then GOOD news.
Stardocks LOGONSTUDIO works on both X-86 and x-64 versions of Windows 7 including build 7057 (which is the one with the hideous Dove on it and the pale blue insipid colour).
Whilst the supplied screens aren't very adventurous you can download others or "Roll your Own".
Maybe we should have a competition here -- It's a bit difficult to post the image as one hasn't logged in yet --so you can't capture the screen.
I might have a go by using a VM and then capturing the Virtual Machine image from the Host OS.
View 9 Replies
View Related
Dec 14, 2011
i've finally got the system up and running.lm using the same gfx card as l used to the Radeon 4650 HD after installing the cards drivers it seems to cause issues where the monitor gives me an "unsupported" resolution error when on my previous setup said card had no trouble going to 1350*768 (cant seem to go above 1024*768 without having to roll back drivers)
View 7 Replies
View Related
Apr 8, 2009
I can't believe this, after the long wait and download, I now get a damn error when trying to burn with PowerIso. Why? Can someone maybe help me?
View 9 Replies
View Related
Apr 10, 2009
i recently did a clean install of 7077 X64 replacing 7068 now for some reason i have two windows 7 listed in boot manger, the first one is the new one the second doesn't even work says boot manager is missing or something along those lines, so i formated and installed again same problem, when starting up after the first start up it takes for every to actually boot it just sits there after the win 7 little colors swirl to make the windows emblem
iv never had this problem before, all my drivers are up to date everything.
anyone have any ideas?
View 3 Replies
View Related
