Using Multiple WiFi Connections Synchronously Beneficial?

Feb 14, 2012

I currently have one default WiFi connection (the card built into my Asus G74sx), but I also have another external USB WiFi adapter, a Hawking dish. I can use both separately, but I've noticed that I am often connected to my network by both at the same time. I was wondering if this has any sort of benefit: as in, does it improve speed/connection reliability/etc? Or is it the same as just having one connected?

View 1 Replies


ADVERTISEMENT

Multiple Network Connections After A Restart?

Jul 12, 2011

I have updated several computers to Windows 7. On this particular computer (Dell Dimension 8400 desktop with Ethernet connection), each time there is a reboot or shutdown, when I log back in, the computer is disconnected from the network. I see that the router gives the computer an IP address, but Internet Explorer does not open Websites, Outlook does not receive email, etc.When I navigate to the 'Network and Sharing Center', I notice that there are 2 'Network Locations' - 1 'home' and 1 'public'. I have attempted to delete the 'public' location, and I have also attempted to merge the 2 'Network Locations' into 1. This seems to work, but I still cannot surf the Internet. Also, after a reboot, the 2 'Network Locations' are back--even after I merged or deleted them.

I have found a workaround for this. After each reboot and/or shutdown, I navigate to the 'Network and Sharing Center', I click on 'Change adaptor settings', I right-click to 'disable' the 'Local Area Connection', and finally I 'right-click' to 'enable' the 'Local Area Connection'. At that point, the 'public' location goes away (which leave only the 'home' connection) and I am able to immediately surf the Internet, receive email through Outlook, etc.This is a major issue because if the computer is rebooted, I can no longer connect to it remotely, until I am in front of the computer again to disable/re-enable the 'Local Area Connection' adaptor

View 1 Replies View Related

Multiple Internet Network Connections

Dec 3, 2009

I have just got a new laptop with Windows 7 (finally!) My question is this:

Is there a way to configure multiple internet connections with either a preferred primary connection or a way that I can manually route applications to a specific internet connection.

For example I am connect to a corporate lan for corporate email, unix access etc, can I plug in my 3g card and then use that connection when i use msn or a specific browser? I want both connections active at the same time, but the banned stuff on the corporate network to use my 3g connection.

View 2 Replies View Related

Wifi Showing No Connections Available

Feb 6, 2010

1st post...I have a dell lap top and a desk top at home I use for work. I have a linksys wireless router I always use for my laptop. All of sudden today i cannot connect to the internet. I have a red X over the wifi icon. it says "not connected - No connections available". i have done all i know to do and sat on hold with dell tech support for over an hour. I always pick up 4 -8 other networks around me too, which is weird that it says none are available. I am on my desktop now, and internet is working fine. reset the router and restarted several times. I believe the wifi connection is enabled.

View 6 Replies View Related

Setup A Computer For Multiple Remote Connections?

Jul 7, 2011

We have a small business that consists of 5 owners. One owner does most of the work and has a Desktop set up in a home office. They do most of the document related work. This person needs physical control of the computer for most of the day. The other four either live in different locations. They need all the information that the main computer has throughout the day. Documents that change, New documents, and the ability to change anything in the documents and save them. The way its setup now is a remote login. This is extremely inconvenient since the main computer is basically hijacked when someone remote log ins. Each computer is obviously on a different network, so local networking wont work.

Is there a way that the main computer can be on, being worked on by the main person, but still be accessed by the other people at the same, or different, times to get the updates and new documents? Can we do this with what we have, or is there another way to do it?

We have thought of various things, like severs, remote log in programs, etc. But nothing really works the way we need. The closest one we found was an auto sync program. But it requires everyone to have all the files on their computer. This is slightly inconvenient because theres thousands of documents and things that everyone would have to load when one person may need 1-200, and the other needs 200-400.

View 2 Replies View Related

Two Different WiFi Connections On A Single Laptop

Nov 6, 2011

When it comes to network connections on my laptop. I was wondering if it is possible to connect to two different wireless networks, on using the wireless network connection and the other using the wireless network connection 2.

View 6 Replies View Related

Software To Find WiFi Connections

Jan 11, 2012

Is there any software via which i can now how many systems(may be with ip address or system name) are accessing my WiFi at a given point of time?

View 3 Replies View Related

Accessing Xp Share Drops Both Wifi Connections?

Jul 22, 2011

I have an XP pro x32 machine on wireless with shared folders, a 7 Ultimate x64 machine (fresh install) on wireless, and Linksys Wireless/wired router (I'll get the model number later, can't remember). I've had the shares on xp set up for a long time and never had an issue with them on XP or Vista machines. The two machines are on the same router, same subnet, same workgroup (home), individually assigned IPs, and can access the outside fine. 7 does not have a "share group" set up. Whenever I access a shared folder from the 7 machine it connects fine until I start to transfer files. It will make it anywhere from a few seconds to a couple of minutes before the wireless connections on both machines are dropped. The connection problems only happen when copying shared files; I can browse shared folders or internet all I want.Side note that may or may not have any bearing: I had been having an issue where the wireless adapter didn't exist (device manager or anywhere else) after coming back from sleep. That required me to reboot to see it again. I fixed it by disabling the save power feature on the driver and disabling sleep mode.

View 2 Replies View Related

Connect To Multiple WIFI APs With Single NIC?

Nov 16, 2012

I would like to know the procedure to connect to multiple Access points with my laptop.For example, my laptop is connected to office WIFI for file sharing. Now, I would also like to connect to another AP for internet connectivity. If i currently do that, it disconnects from the previous network. how can i Simultaneous connect to multiple APs?

1 Wifi virtual miniport adapter by microsoft

2 this link, Microsoft Research Virtual WiFi - Microsoft Research However, I am not able to figure out how to use or configure these things.

View 5 Replies View Related

Windows 7 Did Not Show Any Network Connections In The Network Connections Window

Apr 19, 2011

Windows did not show any network connections in the network connections window. I tried everything that I could find online but nothing worked. As a last resort I decided to reinstall the driver for my Intel 82566DC-2 Gigabit network connection. I uninstalled the old driver and then installed the latest drivers but now I get code 31 (cannot find the driver software) in device manager and the connection doesn't work.

View 5 Replies View Related

Multiple BSOD At Random Times With Multiple Drivers Identified?

Nov 13, 2011

I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]

View 2 Replies View Related

Multiple Users On Multiple Windows 7-64bit Systems?

Feb 13, 2013

We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..

View 2 Replies View Related

Multiple Blue Screens With Multiple Reasons

Dec 13, 2012

I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled

View 5 Replies View Related

Working With Multiple Monitors Does Not Allow Multiple Desktops

Sep 7, 2012

I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.

It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.

Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.

View 2 Replies View Related

Gigabyte UD3H Wifi Doesn't Detect WiFi Or Second Screen

Sep 21, 2012

I installed all the drivers available from the Gigabyte website for some reason the wifi function simply does not work. Also, the screen plugged into the 7950 works fine but the other screen connected into the motherboard gets the message "no signal detected".

View 1 Replies View Related

[WiFi] Configuring WiFi With Internet On Windows 7 Ultimate?

Feb 27, 2012

I have - A Laptop with Windows 7 UltimateA Linksys Wireless Router with ports which are all Ethernet ports (i.e. no USB ports).A Tata Photon Plus (which is basically a Wireless USB Modem)I have been trying to setup a wireless network to have my handheld devices connect to the internet.I have - Connected the Ethernet port of my laptop to one of the Ethernet Ports of my Wireless Router.I have connected my Wireless USB Modem to my laptop (as my Router does not have a USM port).My Questions While I have been able to setup the Wireless Network, the Network shows "No Internet Access". Can someone help me with how to bring in Internet to the Wireless Network? I am sorry but I don't have enough networking acumen which would enable me to do this without assistance.

View 9 Replies View Related

Connect Samsung Galaxy Through Wifi Of A Shared Wifi

Jan 24, 2013

i have a samsung galaxy ace. my laptop is accessing internet through wifi from my friend's building. So can i access internet in my samsung galaxy through wifi from my laptop? if yes..how?

View 2 Replies View Related

Multiple BSOD With Multiple Errors?

Mar 19, 2012

I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.

Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme

View 3 Replies View Related

Multiple Resolutions On Multiple Displays

Oct 31, 2009

I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.

View 4 Replies View Related

No Connections Are Available?

Jan 3, 2013

I was shutting down my laptop. At the same time ,i pressed power button and forcedit to shut down. Now my network connections icon in task bar says"No connections are available". Even though i have LAN connected. Wireless is not working too

View 1 Replies View Related

No Connections Are Available?

May 5, 2012

I turned on my Netbook (Packard Bell NAV50, Windows 7) the other day and it would not connect to the internet. Not only won't it connect, but I can't even find any wireless networks, the icon in the bottom right just has a red cross. I'm currently using another laptop which can detect the network and next doors too so it is not a problem with the router. My PS3, phone, iPod etc also all connect fine. I've checked the fn f2 thing and that is definately on and working. Also when i click on "change adapter settings" in "network and sharing centre", it is there and is enabled and has the full green symbol icon but also has a red cross.

View 1 Replies View Related

No Connections Are Available?

Nov 10, 2012

I just freshly upgraded from windows XP 32 bit to windows 7 32 bit. The installation was easy, and here my computer is sitting at the desktop ready to run.he problem is that i cannot connect to the internet? I was able to connect to the internet using XP just minutes ago, but now that I upgraded to 7, "no connections are available".what do I do?troubleshoot said a ethernet cable is not properly plugged in or is broken..that cannot be true as i was just connected to the internet on XP minutes ago

View 9 Replies View Related

Not Connected Connections Are Available?

Jul 17, 2011

I am getting this message after having added two new entries to a registry earlier today. Since then, I have deleted the two entries and the problem persisted. I've also done a system restore from before the incident and that hasn't helped. Lastly I also uninstalled and reinstalled the network driver.I know my Internet isn't the problem as my phone works with he Internet just fine.

View 1 Replies View Related

No Connections In Windows 7 64 Bit?

Apr 18, 2011

So I'm running Windows Seven 64 bit on an Asus N61V, no connections available. Nothing appears anywhere. Internet and router are working fine.

View 9 Replies View Related

Two Network Connections

Oct 22, 2009

i have a ADSL connection with a router connected to my local area connection

and i recently brought a HSDPA mobile broad band connection with HUAWEI E156G USB stick

is there any way to use both connections same time? like for download local area connection and for browse HSDPA connection.

View 3 Replies View Related

Suddenly No Connections Available

Jul 8, 2010

I've been running Windows 7 and connecting to my wireless router for a few months with absolutely no problems at all. Suddenly a couple of days ago the wireless stopped working and it can't see any connections. There used to be a few it could see, but now not even one! I know the router is ok because I can access it wirelessly with my iPhone. I also know the hardware is ok on the laptop because I swapped the hard drive with an old XP one and the wireless worked perfectly.

View 5 Replies View Related

Laptop Says There Are No Connections Available

Sep 2, 2012

I recently did a system recovery and reset it to factory defaults I have a Samsung 305V with Windows 7 I have hardwired it straight to my router and tried wireless and have reset both the modem and router several times also disabled the firewall?

View 2 Replies View Related

Laptop Says There Are No Connections Available

Oct 14, 2012

i cant connect to the internet

View 3 Replies View Related

2 Network Connections

Dec 1, 2009

Ok i have a problem and i cant seem to fix it. i haev 1 Nic card installed yet in my Network Share Center it shows HOME Private Undefined Public the 2nd i want to go away. every time its there i cant connect to the internet. the only way i can temp remove it is to disable the network card then go to the control panel and re-inable it this will only bring back the HOME one again but as soon as o reboot the other one it back. i have been at this for a few days and i REALLY dont want to redo my computer to fix this.

View 3 Replies View Related

Windows 7 Pro X64 & Inbound Connections

Aug 27, 2011

What is the maximum number of inbound connection for Win 7 Pro x64?

I am helping someone setup an office where the host OS running Win 7 Pro x64, and have about 15 client machines connect to it.

The client PCs would be used to save/access data stored on the host machine. Would getting a full blown server be a better solution?

View 3 Replies View Related

Internet Not Connected - No Connections Available

May 26, 2012

I've had a problem for the past few months trying to get my Internet to work. The wireless works fine with my phone, other computers, installed Ubuntu on my comp, etc. The only place it seems to not be working is in my windows. I'be checked out a few videos and can't seem to find the exact solution. I'm thinking it may be a virus, but the avast antivirus "quick check" didn't find anything of that sort. In the device manager under Network Adapters, there are two links that each have a yellow 'i' symbol. When I troubleshoot with windows it says there are no issues. When I go to 'Change adapter settings' there are no adapters available such as the LAN, etc.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved