I remember back when we were using XP, 2000, ME, 98 and even 95 versions of windows, we had the option to change the login screen so that you HAD to type in both username and password. I know public PC's are often setup this way too, but I can't figure out how to do this on my windows 7 PC, and would very much like to use this option.
View 1 RepliesI have a vista 64bit - after i renamed the user home folder i then logged onto the user account of the folder i had renamed. Turns out the account has been restored to default settings with none of the old files, etc. When i go into the Users folder however, there is an additional folder entitled ''TEMP'' and the renamed folder is still there and is intact. How do i restore the account/user to its previous state?
View 3 Replies View RelatedIt seems to me that I have a lot less updates now that I am using windows 7 premium 64 bit... I never had windows vista... I used xp pretty much right up until Jan 2011... it seems to me like the version of windows I am using now (7 premium 64 bit has way less updates than xp professional had... does anyone know if this is true that this version of windows has needed less updates?
View 5 Replies View RelatedTrying to restore some folders to previous versions, but I get met only by the sight of this on all the folders:s you can see, there are previous versions, but I can not select one of them to restore with. I can go in and look in them but as I cannot restore with them, "Reset" button is not clickable.
View 1 Replies View RelatedFor the third time in a week, Windows 7 has replaced some of my personal data files with earlier versions, without my consent, following a restart. I'm talking about my outlook Data file (outlook.pst), my Quicken data files and a few others. Files are located in different places, but mostly in my Documents folder.
There are no errors, no crashes and no warning whatsoever. I just restart the PC and suddenly my data files are overwritten with sometimes days old versions. The first time it happened I assumed that maybe I hadn't properly saved my document(s), but then I noticed it actually WAS replacing current files with earlier versions. I would enter a few days worth of transactions into Quicken, save and even backup the files, only to have it revert back to a file that was saved two days ago after restarting the PC, causing me to have to re-enter all those transactions. Same thing with Outlook - I could add/change/remove appointments in my calendar, only to discover that it went back to an earlier time after the next restart, all changes made would be lost. Just a simple reboot is all it takes - the last time I had to reboot to update a driver. This is completely unexpected & unacceptable behavior. What would cause Windows 7 to do this?
In hopes of solving some issues I was experiencing with IE-9, I upgraded to Pre-Release 10. Anyway, now that I'm on IE-10, I've noticed that some webpages I've written no longer appear the way I'd like them to. Specifically, this relates to tables; more specifically, to their borders. From what I can tell so far, this is due to the fact that IE-10 has deprecated the following HTML tag: bordercolor="value". I've considered the idea of reverting back to IE-9, but rejected that as a misguided attempt to hold onto the past: i.e., I think other browsers have already deprecated this tag; IE-9 being the last hold-out.
So onward we go. And from what I can gather, the way forward will involve some kind of CSS implementation, about which I know almost nothing; something I'm not bragging about, to be sure. I've begun to review some online documentation, specifically, HTML Dog. While this seems like a great resource, I'm having a hard time using it to quickly learn how to make the necessary changes to some production webpages so I can restore them to their previous appearance. Perhaps, I should mention that I really don't use any special webpage generation tools. I just write the straight HTML code using MS Wordpad. Also, my knowledge of HTML is both rudimentary and backlevel: what I've learned to do over the years is probably based on the HTML 3.0 standard.
Is there a way to make the arrows on desktop shortcuts smaller as you could do in previous versions?
View 6 Replies View RelatedAfter doing a basic install of Windows 7, patch etc, I would like to be able to automate many post-install setup options/preferences and I'm wondering what the best approach to this would be. For example, adding specific toolbars, resizing toolbar and buttons, folder options, etc... all the little things we tweak after we get our system setup. The only thing that comes to mind now is to watch the registry with some software and see where the changes I make get recorded, my fear is that not all of them may be stored there...
View 4 Replies View RelatedRestore system settings and previous versions of file is greyed out on my system, I may have disabled a required service for this. As I'm about to try the X-Fi MB2 mod again as the last time I tried it my system was messed up that it wont even recognize my actual X-Fi card properly. So I'm thinking a system restore can work with this experiment.
View 1 Replies View Relatedi start my pc up (from being off) and get logged into a temp user profile. It tells me that i cannot acess my user profile and all information will be deleted on logging out. I've looked online for a soloution but none work for me ,I really dont know how to resolve this problem,I have limited knowledge and computer skills. i really dont want to scrap this drive and start over.
View 15 Replies View RelatedI am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
I'm hoping to teach Mum how to use my PC in the near future and she will only be using it for typing etc and maybe the internet. Also she only use it sometimes. shall I create a Limited User Account for her or turn on the Guest Account?
View 3 Replies View RelatedI would appreciate any help identifying the cause of extremely slow log on times for a user account on our family laptop. The machine is running Windows 7 - 64-bit version, and currently has 3 users accounts 2 admin and 1 regular. The regular account has begun to experience log on times that last for minutes (The Welcome splash screen prior to log on screen), while the admin accounts have no problems. I have seen other posts regarding slow log on times, but I haven't seen those which address the issue for a specific user account.
View 5 Replies View RelatedWhen I took over a PC used by my predecessor, he had Win 7 (MS keyboard) set up so that the Windows key to the right of the space bar and Alt key will dump "http://www." into any open text field. This saves me a lot of time on a repetitive task with our software. However, when I asked one of our best developers how I could assign "mailto:" to another key, he had no idea how the existing functionality was set up. Googling "Windows 7 hotkeys" didn't find me any tips. What to do?
View 5 Replies View RelatedI have always been running admin and even until now I run as admin. But, I have been doing a little bit of research and realize that using a standard account is a safer practice. I have never even used a standard account.Is using a standard account a better practice? Also, how does doing average task such as installing programs and updating work through the standard user account?
View 4 Replies View RelatedHow to Unlock a Locked Out User Account in Windows 7 ?
View 0 Replies View RelatedHow to change a power user account to administrator account
View 2 Replies View RelatedHow do I map existing User Folders to a newly created User Account?I had existing User Folders on drive D. I added a new drive C and installed the OS on C but changed default location of User Folders to D. Now my existing User Folders are in the Users folder on D but there is no User Account associated with them. If I create a user account with the same name will it map to the existing folder within Users?I did a test of this. I created a folder called Test within Users then created a User account called Test and logged in. It created another folder within Users called Test.Computername.
View 2 Replies View RelatedMy question is are these neccessary and why are there multiples? Wouldn't that in itself cause software conflicts?They came from various games off steam and other programs such as drivers and editing software.I don't understand why it stacked so many, I mean wouldn't it be better to uninstall all the versions and reinstall the most up to date versions? I went this route last time and afterwards I got side by side errors. I just don't want software conflicts so I ask the experts here, is it safe to remove these?
View 6 Replies View RelatedI have laptop gifted to me, with a user name which I want to change.I have the following steps in mind:
1. Create a new administrator account
2. Copy the profile from old username to new user.
3. Backup the entire registry.
4. Edit the exported .reg file to find and replace old user with new user.
5. Login as the new user.
6. Delete old user
7. Restore the new (edited) .reg
I set up four Dell Computers with Windows 7 Home Premium. Used my administrative account to install software (Microsoft Office Suite), Microsoft Security Essentials, Ccleaner, and Malawarebytes. All programs installed properly. As these computers are going to be used in a public place by junior and senior high school students, I thought it would be best to set up a standard user account for each of the four computers. I have it set up but when I log in as a standard use (non administrative) all the programs that were installed are not available. Tell me if I'm wrong. I think the programs would still be listed in program files when the standard user is open. Can I go to each of the programs and right click to open and then be prompted to key in my administrative password. I would think this should allow the program to be run in the standard user desktop.
View 1 Replies View RelatedI've tried to search this but have had no luck. My wife's computer has XP Pro 64-bit installed and she wants to try (again) to upgrade to Windows 7. I have 2 hard drives for her computer, the one with the XP OS is installed and the other with Windows 7 is waiting to be installed. I only planned on installing one HD at a time, but if I can install both and copy her user files and emails from one HD to the other, that would be an option too. Eventually I want to have just the Windows 7 HD installed and archive the XP HD in the safe.Several months ago she wanted to try Windows 7 but I anticipated that she may want to switch back to XP if she didn't like the new system. I bought a new HD and installed it in her computer, then installed Windows 7 Pro on it. The new system works fine and was updated to a current state as of several months ago. I realize there will be lots of Windows 7 updates to install, and I'm willing to spend the time necessary to do that. However, I'm looking for a short cut for installing all of her personal settings and Outlook email files from XP to Windows 7. I'm thinking that I could copy her entire User file from the XP system and after Win 7 is finally updated and current, paste that User account into Windows 7. MS Office 2003 is already installed on the new HD. I realize it won't be a 100% "one for one" swap and that I may have to tweak several settings from her XP User account, but is using the XP User account even feasible? If I can't paste her XP User account, can I copy her XP Outlook PST file onto a flash drive and then paste that PST file into Windows 7? I don't see why that wouldn't work, but there are a lot of issues that I'm not aware of. Does anyone have any better suggestions on how to import her personal settings and emails into Windows 7 on the new HD? P.S. I didn't realize this was my first post. I've been lurking and reading for quite a while. I live in the Largo, Florida area and have been very active in computers for several years, but just recently upgraded to Windows 7 on my personal computers. I'm getting more comfortable with Windows 7 each day, but now that I've broken the ice with this first post, I hope to become fairly active. I hope that I can eventually contribute to the forum. I'm glad to be here!
View 5 Replies View Relatedhow I can run a program, Core Temp.exe, on Windows 7 without having to manually enter the admin password and manually run it after logged in.I tried 3 ways:
1) Run as Admin Went to both the shortcut and the program location -> properties -> "Run as Admin" ---> didn't work Also checked "Run in Compatibility mode for windows 7" ---> didn't work
2) Task Scheduler Use Task Scheduler to run the program at startup---> didn't work run whenever any user logs in---> didn't work run whenever I log in ---> didn't work All of the above triggers at once ---> didn't work
3) Registry Editor Local Machine -> Software -> Microsoft -> Windows -> Current Version -> Run Made a string to run the program ---> didn't work All I want is this program to run whether I'm logged into any account. Specifically, my Limited Account so that I can monitor my CPU temperature and usage. It works after I run the program manually, this pops up "do you want the following program from an unknown publisher....", and enter in my admin password, but this is tiring.
what is power user account in windows 7 ?
View 2 Replies View RelatedIn this tutorial, it's time to take a look at the often unfairly criticized User Account Control security mechanism. User Account Controls (UAC) were introduced in Windows Vista and were immediately unpopular with users migrating from Windows XP. However, they drastically improved security and when used in conjunction with limited user accounts, can actually save a great deal of time, as we'll demonstrate in the video.
View 0 Replies View RelatedRecently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that.It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users.I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account.
View 1 Replies View RelatedI just bought this about two hours ago. If even that long. & it seems that when my built in webcam is turned on if I don't take pictures routinely it logs me off. It only happens when the cam is on. Is there a way to stop this? I'm trying to play around with the options and what not but its quite difficult to do when the computer keeps logging my account off. Its Windows 7 Home Premium 64 Bit. Its made by HP. The box says "Pavilion dv5. dv5-2074dx."
View 3 Replies View Relatedwhen I turn on my computer, or bring it back from sleep mode, there are two of the same account. Basically it shows the user boxes with the same name twice, (both with the same password, picture, etc.) It's not really a problem, just kind of annoying to me for some reason.
View 2 Replies View RelatedRecently I bought Toshiba Sattelite C670-1DJ and today I accidentally unplugged my AC cable. So I started it and it started computer with "Starting your computer for first use" or something like that. It logged in temporary Administrator account and when I tried to switch to my account, it wasn't there, however there is my folder in C:/users. I tried to reboot computer and edit registrs(I am a begginer in Windows, so i didn't try to do something extraordinary) but nothing help, i cannot log in my account. I need to get in my account, there are few specific programms that won't run.
View 1 Replies View RelatedI have Windows 7 account named Joe and it is an Administrator. Whenever I try to open a program or shortcut I get the "Open with..." dialog box and my option is Internet Explorer. Another odd thing that I discovered is that if I right click and select on "Run as Administrator" a program or shortcut will open as it should.I also created a seperate Administrator account named Jim and everything opened normally.
View 3 Replies View RelatedMy brothers laptop has apparently deleted his user account and so he cannot start it up? Im not sure about the details tbh, hes running Windows 7 on a Dell laptop and he still has the installation disc and stuff. All hes told me is that his account has been deleted and so he cant start it in normal or safe mode.
View 9 Replies View Related