can someone please clarify a few things for me.
1. the upgrade disks and the full disks are exactly the same EXCEPT the upgrade one requires proof that you own a copy of vista or xp.
2. what kind of proof does it require? does it just ask you for an XP/vista serial during the install?
I am on Vista Home Premium at present. I bought the upgrade to Windows 7. I have two questions:
1) Is it true that when you upgrade from Vista to Windows 7, all of your installed programs basically remain intact and working, or do you have to re-install everything again from scratch? I believe that the documentation in the box said that if you are on XP, you would have to reinstall MS Office and some other programs. What is the situation in upgrading from Vista?
2) Partly in order to find out the answer to the above, I decided to upgrade my laptop first because it has relatively few installed programs on it compared to my PC. I tried on three separate occasions to do the upgrade. On each occasion, it went all the way through to the very end, completing all of the listed steps. However, it then stated that Windows 7 could NOT be installed on this computer and then unwound the entire thing, leaving me with Vista again.
Why, is a mystery to me because when I ran the Windows 7 Upgrade Advisor, it did not highlight any problems that would prevent the installation. Yes, it did point out one printer driver which might not work after the upgrade and advised me to uninstall it (which I did NOT do - might that be the problem?), but apart from that it seemed to be happy with the situation.
3) Do I really need a skilled technician to do this upgrade or can I not just do it all myself? If some major backup and re-installation of complex drivers is necessary, then maybe I need one. But is this really going to happen, or is the whole thing as self-explanatory as it seemed while doing it on my laptop?
I've upgraded all of my computers to Windows 7. Including my wife and children's older computer. I build all of my desktops myself so there's no particular model number or brand name for any of the desktop computers. After loading Windows 7 on my wife's machine I noticed that Windows 7 still seemed a bit sluggish. This is due to the fact that all of the hardware in it is pretty old.
So here are my questions. Is Microsoft going to give me a hard time for upgrading this computer after only a month of 7 use? Or am I going to be able to upgrade motherboard, cpu, graphics and memory with no trouble?
I should add that Windows 7 was installed using an Upgrade DVD if that helps.
On my laptop i have a limited amount of HD space i currently have 37 gb free of a 160 gb drive. After i upgrade to Windows 7 is there any way i can delete my old vista files? and if so where would they be located and is it safe to delete them?
View 3 Replies View RelatedI just a purchased a brand new laptop. I have had it less than a week and qualify for the windows 7 upgrade. I would prefer to do a clean install, but not wish to lose certain programs that came default on the laptop (ex: powerDVD for playing blu ray, will cost $160 to replace).
Questions:
1.) With my Vista install as fresh as it is ,will upgrading to 7 be that much worse than a clean install?
2.) If I choose to clean install, is there a way to recover the programs without a repurchase (some way to back up an installed program on a flashdrive in a way that it can be moved or installed on the new OS)?
3.) If i have to upgrade instead of clean install, will running a registry cleaning program like "Clean My Registry" clean out the goop left behind by Vista? Or will it likely cause more issues?
After a ton of speculation, a bit of denial, and a ton of testing we finally have our answer. The thermal interface material change made by Intel when it went from Sandy Bridge to Ivy Bridge is indeed the cause of the excessive temperatures weve observed while overclocking. The first accusation was made in late-April by Overclockers.com, however proving it wasn't easy. The Japanese division of PC Watch somehow managed to remove the integrated heat spreader from a Core i7 3770k, along with the stock binding and grease. They then proceed to replace it with aftermarket alternatives, and the results speak for themselves.
View 9 Replies View RelatedI noticed an interesting attack on my fully patched windows 7 home premium system at the standard user level: I don't know exactly how this was done, but I do have some traces (Keep in mind that I had disabled UPnP services beforehand):
1. Auto proxy checker had executed.
2. Teredo Tunneling and about 15 ISATAP tunneling adapters were created.
3. Malware successfully bypassed my two-way firewall and transmitted to the outside.
It looks like malware is able to successfully use ipv6 Teredo Tunneling and ISATAP tunneling to confuse my two-way firewall and use tunneling loops to send traffic outside. I had UPnP blocked, but they used tunneling tricks to bypass the firewall rules.Because the use of tunneling loops bypassed my firewall rules I would like to permanently disable the actual services for VPN and tunneling on my Windows 7 machine. What services need to be disabled to make my Windows 7 machine absolutely VPN and tunnel proof?
I have tried connectint to the ethernet, and the wireless, but my laptop won't even connect. Is it a problem with my IP adress?
View 5 Replies View RelatedI've installed windows 7 and I need to install drivers for my graphics card but I don't know what kind I actually have. Where can I look for that info?
View 2 Replies View RelatedI am using 7 Ultimate.Two days ago I was tempted to try I.E.9, D/L it but decided it wasn't for me.Did the uninstall in "Add/Remove".Later I realised that my yellow folders, from "My Docs" etc down to folders I'd gathered work in would not now open with left clicks, only with R click and "Open". The message I get is "This file does not have a program associated with it for performing these actions.Please install a program or, if one is already installed, create an association in the default programs control panel".how do I define my "yellow" folders in order to assign 'em to something that will open them with? If I drag "My documents down to the taskbar and pin it to Windows Explorer then it will open from there with no problem.I gather that Windows Explorer is the programme to link 'em to but how?
View 5 Replies View Relatedpicking a capture card to record computers (i would like to record a game called Minecraft and i dont know what kind of capture card to use). Also i have a Gateway laptop?
View 1 Replies View RelatedAnyways I've used windows xp happily for years, but I want to make the switch from windows 7 being in a slow, sluggish, crappy virtual pc to being setup as a dual boot. I've never set this up before so I have a few questions.
Firstly I've been trying to use gparted, but its not working. I know how set up an iso for burning and all, thats not the problem. Yes my computer is set to boot from cd first, I know that! But I don't understand why its not working.. Anyways for those that have used it, I've heard that you keep all your files on the hard disc when partitioning? Is this a load of crap? Or do you really? And if I can't get this to work what other program should I use?
Secondly whats the best way to back everything up. I did a complete backup using the backup utility, but at the end it said something about it could make an ASR because I don't have a Floppy Disc. I read online that all that does is help me boot the computer right into the backup incase something major goes wrong. If I ignore this then I will just have to install XP again and then back everything up?
I've got a few questions regarding networking in general and then some issues that have popped up since upgrading (in place) to Windows 7.
1) Generic question: If I were to install a Wireless N router would the wireless network default to the slowest connection on the network? For example, if I had two N wireless adapters and one B adapter would the entire network run at B speeds? If so, would a dual band router allow me to circumvent the issue?
2) Generic question: Would the same issue as outlined in #1 be a problem in a wired network? Can I mix 10/100 and gigE on the same wired network and achieve gig speeds between gig-enabled devices?
3) Specific: I have an HP dv9500t that I upgraded to Windows 7. HP has not released Windows 7 drivers for this machine but I have been able to work around the few issues that I encountered. However, my wireless connection to my Linksys AP (Wireless-G broadband router WRT54G2 with up-to-date s/w) seems to be dropping and recovering on a regular basis. I have not seen the issue on any other wireless network. If I am downloading a large file (say 1G) the d/l will proceed at full speed for ~45 seconds and then drop to zero for ~45 seconds. I'll usually get the "limited connectivity" alert but then the link will restore itself and begin transferring again.
I've run some of the Linksys diags when it is down and it usually tells me that the default gateway is unavailable and resets my wireless adapter and the whole routine starts again. Quite frustrating. I've worked with Linksys tech support (they claim no known issues with Windows 7) and their supposition is that it is an interference issue and they suggest I change wireless channels.
I've tried 6 different channels and the issue does not change. I have tried upgrading the adapter drivers the the latest available from HP (Vista drivers, not Windows 7) and have also tried drivers from the adapter manufacturer (Intel Wireless WiFi link 4965AGN, Win 7 drivers) but the issue is still there. I have also rest my AP back to factory defaults to no avail. It certainly could be that I have burned through yet another wireless AP but before replacing it I wanted to see if anyone might have suggestions.
4) Since, as far as I know, Homegroup cannot be used unless all of the PCs on the network are Windows 7 I am trying to utilize Workgroup settings to config my network. The problem is that my wirelessly connected laptop does not seem to have access to my wired workgroup unless I set the SSID of the AP to the same name as my workgroup. Is this normal operation or is there a good tutorial around showing me how to set this up?
My computer has been randomly shutting down for the past few days, and i have no idea what could be causing it.i'm currently running windows 7 home premium x64. it is OEM preinstalled.the laptop is a T520 from lenovo and is approximately a month old. the os is the same age as it came with the laptop, so about a month old.
View 1 Replies View RelatedI'm trying to wipe my pc, and reinstall windows 7. I have to use a downloaded version. It's legit, I've used it before. I just want to rid my pc of all the crap on it.I have a toshiba satellite p755d. It won't boot from any kind of media, nor does it seem to recognize it until windows is loaded.I went to the bios to change the boot order but I couldn't find that option anywhere. I've tried all the function keys as well as holding down the "c" button when the pc boots up.The most I get is a "Windows Error 'something'" I can't remember what it says at something.
View 9 Replies View RelatedMy sound keeps stopping and going when I play any kind of a video or anything with music
View 2 Replies View RelatedI have a Hp compaq desktop windows 7.What kind of video driver do i need to allow my vga screen splitter adaptor to allow me to use dual screens?NOT MIRRORED SCREENS,BUT DUAL SCREENS FOR MORE SPACE.
View 7 Replies View RelatedReally know nothing re Drivers, except that it is apparently a good idea, always, to use the latest.
Anyway, was thinking of possibly downloading the latest drivers for my Radeon graphics card from the ATI site.
(But my questiosn really relates to any drivers, not just those for my graphics card)
My understanding is that one is supposed to delete the present drivers from the control panel prior to downloading and installing the new ones.
BTW: I looked in "Control Panel," but it is not clear to me how one deletes, safely, the present drivers for a particular program. How is this done, please ?
So, what happens immediately after the deletion of the present drivers before any new ones are installed ?
Will my graphics card (or any other program where I have removed them) still function even without "any" drivers at this point ? How is it possible ?
If someone could explain this for me, would be appreciative.
Also, I read that one should use in addition a "driver cleaner".
Why is this (also) necessary ?
What would be your recommendation for a good free or inexpensive one that is
also safe ?
I am going to dual boot Windows 7 (Home Premium) using a separate new Hard Disk Drive, with XP already installed on the old existing Hard Drive and using the instructions in this link:-
Dual Boot Installation with Windows 7 and XP
As it is the first time I have tried something like this could someone answer a couple of questions for me?
1: The XP drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus, together with any required software/programs, are already installed on the original XP HDD.
When I have installed Windows 7 on the second/new HDD, do I then boot the Windows 7 OS and install the Windows 7 drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus together with any software I want to run on Windows 7 (even if that software was already installed previously for XP?) It seems funny having two sets of drivers (XP & Win 7) and Antivirus on the one machine.
2: XP runs all the programs that I need and I am just trying out Windows 7 at the moment so Win 7 restore points are not very important to me.
If that is the case, can I just ignore the fact that XP may delete the Win 7 restore points, in a dual boot, and not bother with the procedure (explained in the above link) to prevent this from happening?
To stop XP from deleting your Windows 7 System Restore Points everytime XP is started, then see System Restore Points - Stop XP Dual Boot Delete to hide Windows 7 from XP. I intend to drop XP and move over to Win 7 eventually so this will just be a temporary setup. Many thanks for any replies.
Homegroup or Sharing?
Which should I do. Its my home office computers. I'd like to be able to access files between both machines. Doing this, what precautions should I make that noone can get into my system? I'm a little hesitant to share ALL files on both computers between each other. But i'd like to!
I'm playing with Sharing now but i'm noticing that sometimes when I save a file on one computer it isn' accessible to the other computer until I right click and SHare it. I thought by sharing the folder it would just share every new file. Is there a way to do that?
Basically i will have:-
HDD no 1 with 1 partition;
C:/ - Win 7 Pro x64 installed
HDD no 2 with 2 partitions;
D:/ - Data (files.....pictures, documents, programs i've d/l etc) around 80Gb of data
E:/ - Recovery partition (Vista HP x64 factory recovery, as the laptop came supplied)
If you run the Windows 7 system image only backup and do all your HDD's and partitions can you restore individual files from that image?
Or do you have to do the data backup of all drives and tick the system image tickbox as well and then still you can only pick from the files you chose to be backed up from under the data backup?
If you understand that.
Basically can i back it all up and choose what i want to re-install upon recovery eg booting from the Windows 7 DVD and choosing repair?
Also i have a netbook with Windows 7 Ultimate RC installed, trying to back up to my laptop over the network it still asks for a username and password when setting it up (OK box is greyed out otherwise) but i dont have a username or pw (single user so didnt input a pw). what do you do in this case?
Is there any way to compensate for the bluetooth headphone audio delay while watching Live TV in Media Center? For movies it's simple I can do it through Media Player Classic but I don't see how to change any kind of audio shifting setting within Media Center.
View 2 Replies View RelatedIn the past few days, I have gotten many BSOD's while browsing the web, playing games, or talking to people on Teamspeak 3. Usually the BSOD/crash hits me usually an hour in while I'm doing those things in a session. Before I did get BSOD's and crashes but they were few and spread out. I never responded to them because they happened very sparsely. Now that they are very constant, I need to do some action. I have went into safe mode right now and am typing this on another computer. As for the dmp files, I didn't have the option for the BSOD crashes to save dmp files but now that that is enabled, I do have one dmp file that I can share.
Also I have noticed that sometimes that when the computer crashes, the sound becomes very distorted, the screen tears/fuzzes into a static-like image and then it just restarts. I either get this kind of crash or just a simple BSOD. It's very strange. Apparently these are considered BSODs as well according to bluescreenview, they just dont have the bluescreen. Interesting..
Specs:
OS- Windows 7 Pro 64 Bit
GPU- AMD Radeon 6870
Mobo- ASUS M4A79XTD EVO
RAM- G-Skill Ripjaw series 4 GB
CPU- AMD Phenom II X4 965 Black Edition
PSU- Corsair 650 Watt
Hard Drive- WD 1 TB SATA
Things that I have done but to no avail:
- Deleted MSI Afterburner
-Deleted Daemon Tools
-Completed a Memtest86 on my RAM. No errors even after 10 passes.
-Took out the RAM sticks, cleaned and then put back in their sockets.
-Cleaned the computer for dust
-Used Ccleaner to scan for problems and junk.
-Full scan of Malwarebytes. Caught 7 things but still nothing changes.
-Done an SFC /scannow scan
-Downloaded all the major Windows 7 updates.
-chkdsk scan.
Temperatures vary but they tend to stay normal. CPU average temperature is around 40 C idle. GPU Temperature is about 40C idle, 50C viewing videos, and and may hit to around 60-65 C while gaming. Fan speed on 55%. Temperatures when computer is idle on the desktop. Screenshots included below: The first bluescreen after I enabled the computer to allow dump files. More examples in the Mediafire list. I have some of the txt and DMP files but I cannot find an "include file" option here: I just upload them on Mediafire. Here are those links. [URLs]
When a link is launched from IE9 and needs to open in a different application, then a couple of security questions are presented before launching it for the first time. How can I reset these questions? (the selection made) Preferably, just for that type of link. Or alternatively, for all such questions.
View 2 Replies View RelatedI currently have an old P4 running 32-bit Windows 7 RC. I don’t think I can put 64-bit on that machine, but I am considering 64-bit on the retail version when it is released in October. I tested about thirty 32-bit shareware and freeware applications on 32-bit Windows 7 RC and they all work well. My questions concern 32-bit drivers and unsigned 32-bit and 64-bit drivers on Windows 7 64-bit retail.
I have seen references to a BCedit command. I ran Bcdedit /set Bcdedit nointegritychecks ON on my Vista SP2 machine and it ran successfully. I have not tested what it will let me do as I now have no Vista driver issues. Here are my questions:
Which of these is the correct command to disable the signature check on Windows 7 RC?
bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS
bcedit –SET TESTSIGN NO
Is there any reason to use the correct command rather than using F8 during the boot process?
Does the correct command work for both unsigned 32-bit and unsigned 64-bit drivers on a 64-bit Windows 7 system?
Is the correct command useful on both 32-bit and 64-bit Windows 7 for driver signing issues generally?
I assume the command works for only 1 boot cycle. Given that, is there any reason to run a command to re-enable the driver signing check if one reboots again after the driver installation?
Is there any other solution other than third party software, which I would prefer to avoid as I don’t expect to run into a driver issue frequently?
What is a decent estimate of how many of my 32-bit applications that work well on 32-bit Vista SP2 will install and work well on 64-bit Windows 7 retail, assuming I use the correct command to disable the signature check?
i was really hesitant since XP worked what i at least THOUGHT was well. But Windows 7 is so much quicker and seamless. Anyways, 1st question is on XP i would drag a shortcut to the taskbar and it would then be usable and work as the original shortcut did. With windows 7 it doesn't wok.
For example, i have a text file that i keep on another drive and i put a shortcut to it on my taskbar. In XP i'd click it and the file would pop up as you'd expect. On windows 7 if i drag that text file to the taskbar, when i click the resulting shortcut instead of the file i just get a new empty notepad.
If i right click it (i THINK it was by R/clicking) then a list of various notepad files i've viewed pops up and i can choose it from there. But i just want it to be a shortcut to the particular txt file. Is there a way? second, i see shortcuts don't have the file's pathway or "address" if you will in them. I miss that for a number of reasons such as being able to tell where the file it's pointing to is, or adding switches in the target line etc etc. Is there a way to make them show the pathway?
My 350 gig HD has 7 partitions. C: is Vista (186 GB) D: (87GB) is HP factory image. The others have most of my programs, files, photos, etc. I have avoided installing most of the larger important programs on C: and they are on other partitions. I plan a clean install of 7 upgrade on C: (also considering 64 bit as my comp qualifies). By "clean" I assume that you and I both mean that partition C: has been formatted prior to inserting the 7 DVD to begin installation.
First, am I correct with this assumption? Second, if only C: is going to be affected by the formatting and installation of 7 is there any mandatory reason to backup all of my programs and files that reside on the other partitions? (other than just being prudent, that is). Also, how much can I reduce the size of C:, as it currently has 132GB free? I also intend to empty D: when this is over.
1) I currently am running Vista on a laptop on which it is the only OS. I want to install 7 on a second partition for dual boot. However, to keep things tidy, I would like to make Windows 7 Drive C: (which currently contains Vista). Is there a way to image the hard drive then reload it onto drive D: after I install 7 on C:?
2) I guess my other option is to install 7 on the formatted HD, then create a D: partition to run the Vista recovery disks on at least that would restore my drivers, etc. But I really wanted to keep my current configuration around for those programs that are slow to catch on to the new OS. (Or do I even have to worry about this?)
3) If all this dual boot stuff is too complicated or if I really don't need to worry about the driver/software compatibility, I might just do away with that idea and clean install it on the C: drive and forget about Vista. (reluctant to do so since I rely on this computer for school). I will be keeping my C: drive image that I took yesterday so taht I can recover to Vista if need be.
Edt: 4) I just had anther thought. If I install Win 7 clean could I then take my Vista hard drive image and make it into a VHD? that would pretty much solve all my troubles I think. Unless I would need to reinstall Vista onto the VHD.
i have dell 1558 laptop.each time i press start button it does not start than again i oress start button than the laptop get start normally. during first press nothing happens, even the start light does not glow.
View 3 Replies View RelatedDoes windows 7 OEM require an OPK or do you just install it like a normal full retail version? I have looked for similar threads and all of them are from 2010 or earlier. I was wondering if any of it has changed or you can still just install it without having to worry about the OPK.
View 5 Replies View RelatedDoes Win7-64 require 64-bit drivers?
I have a 1 y/o Dell DuoCore 64-bit processor but the Dell drivers site lists only 32-bit Vista drivers for my model. Am I consigned to Win7-32?
