Backup Noob Questions
Nov 6, 2009
Basically i will have:-
HDD no 1 with 1 partition;
C:/ - Win 7 Pro x64 installed
HDD no 2 with 2 partitions;
D:/ - Data (files.....pictures, documents, programs i've d/l etc) around 80Gb of data
E:/ - Recovery partition (Vista HP x64 factory recovery, as the laptop came supplied)
If you run the Windows 7 system image only backup and do all your HDD's and partitions can you restore individual files from that image?
Or do you have to do the data backup of all drives and tick the system image tickbox as well and then still you can only pick from the files you chose to be backed up from under the data backup?
If you understand that.
Basically can i back it all up and choose what i want to re-install upon recovery eg booting from the Windows 7 DVD and choosing repair?
Also i have a netbook with Windows 7 Ultimate RC installed, trying to back up to my laptop over the network it still asks for a username and password when setting it up (OK box is greyed out otherwise) but i dont have a username or pw (single user so didnt input a pw). what do you do in this case?
View 4 Replies
ADVERTISEMENT
Oct 25, 2009
My 350 gig HD has 7 partitions. C: is Vista (186 GB) D: (87GB) is HP factory image. The others have most of my programs, files, photos, etc. I have avoided installing most of the larger important programs on C: and they are on other partitions. I plan a clean install of 7 upgrade on C: (also considering 64 bit as my comp qualifies). By "clean" I assume that you and I both mean that partition C: has been formatted prior to inserting the 7 DVD to begin installation.
First, am I correct with this assumption? Second, if only C: is going to be affected by the formatting and installation of 7 is there any mandatory reason to backup all of my programs and files that reside on the other partitions? (other than just being prudent, that is). Also, how much can I reduce the size of C:, as it currently has 132GB free? I also intend to empty D: when this is over.
View 4 Replies
View Related
Apr 30, 2011
I just finished my first build about 3 months ago, and everytihng was nice and dandy until NOW I start getting the blue screen of death. It says something like error dxgmms1.sys driver_irql_not_less_than_or_equal. I did just some limited resarch on the net, and people are saying that I should try to update my drivers. I updated the video card driver, I`m pretty sure I got the latest motherboard bios, and W7 says no current updates available. Now the last time it happned to me I was watching a movie so I figured it might be the video card? But on the net people say I should run memtest. So i did and while it was running it killed again?. So is the RAM or the video card, how can I find out?
Specs:
OS: W7 64 bit
MOBO: Gigabyte G41M-ES2L
CPU: Intel Core 2 Quad Q8400 2.67 Ghz
GPU: ATI Radeon 4600
PSU: Corsair 750 W
RAM: 2x 2GB Corsair XMS
View 7 Replies
View Related
Aug 11, 2012
i'm new to this forum attached in the SF diag tool folder that one of the tread recommended me to do.
View 1 Replies
View Related
Aug 18, 2009
Anyways I've used windows xp happily for years, but I want to make the switch from windows 7 being in a slow, sluggish, crappy virtual pc to being setup as a dual boot. I've never set this up before so I have a few questions.
Firstly I've been trying to use gparted, but its not working. I know how set up an iso for burning and all, thats not the problem. Yes my computer is set to boot from cd first, I know that! But I don't understand why its not working.. Anyways for those that have used it, I've heard that you keep all your files on the hard disc when partitioning? Is this a load of crap? Or do you really? And if I can't get this to work what other program should I use?
Secondly whats the best way to back everything up. I did a complete backup using the backup utility, but at the end it said something about it could make an ASR because I don't have a Floppy Disc. I read online that all that does is help me boot the computer right into the backup incase something major goes wrong. If I ignore this then I will just have to install XP again and then back everything up?
View 3 Replies
View Related
Nov 17, 2009
I've got a few questions regarding networking in general and then some issues that have popped up since upgrading (in place) to Windows 7.
1) Generic question: If I were to install a Wireless N router would the wireless network default to the slowest connection on the network? For example, if I had two N wireless adapters and one B adapter would the entire network run at B speeds? If so, would a dual band router allow me to circumvent the issue?
2) Generic question: Would the same issue as outlined in #1 be a problem in a wired network? Can I mix 10/100 and gigE on the same wired network and achieve gig speeds between gig-enabled devices?
3) Specific: I have an HP dv9500t that I upgraded to Windows 7. HP has not released Windows 7 drivers for this machine but I have been able to work around the few issues that I encountered. However, my wireless connection to my Linksys AP (Wireless-G broadband router WRT54G2 with up-to-date s/w) seems to be dropping and recovering on a regular basis. I have not seen the issue on any other wireless network. If I am downloading a large file (say 1G) the d/l will proceed at full speed for ~45 seconds and then drop to zero for ~45 seconds. I'll usually get the "limited connectivity" alert but then the link will restore itself and begin transferring again.
I've run some of the Linksys diags when it is down and it usually tells me that the default gateway is unavailable and resets my wireless adapter and the whole routine starts again. Quite frustrating. I've worked with Linksys tech support (they claim no known issues with Windows 7) and their supposition is that it is an interference issue and they suggest I change wireless channels.
I've tried 6 different channels and the issue does not change. I have tried upgrading the adapter drivers the the latest available from HP (Vista drivers, not Windows 7) and have also tried drivers from the adapter manufacturer (Intel Wireless WiFi link 4965AGN, Win 7 drivers) but the issue is still there. I have also rest my AP back to factory defaults to no avail. It certainly could be that I have burned through yet another wireless AP but before replacing it I wanted to see if anyone might have suggestions.
4) Since, as far as I know, Homegroup cannot be used unless all of the PCs on the network are Windows 7 I am trying to utilize Workgroup settings to config my network. The problem is that my wirelessly connected laptop does not seem to have access to my wired workgroup unless I set the SSID of the AP to the same name as my workgroup. Is this normal operation or is there a good tutorial around showing me how to set this up?
View 6 Replies
View Related
Dec 27, 2009
Really know nothing re Drivers, except that it is apparently a good idea, always, to use the latest.
Anyway, was thinking of possibly downloading the latest drivers for my Radeon graphics card from the ATI site.
(But my questiosn really relates to any drivers, not just those for my graphics card)
My understanding is that one is supposed to delete the present drivers from the control panel prior to downloading and installing the new ones.
BTW: I looked in "Control Panel," but it is not clear to me how one deletes, safely, the present drivers for a particular program. How is this done, please ?
So, what happens immediately after the deletion of the present drivers before any new ones are installed ?
Will my graphics card (or any other program where I have removed them) still function even without "any" drivers at this point ? How is it possible ?
If someone could explain this for me, would be appreciative.
Also, I read that one should use in addition a "driver cleaner".
Why is this (also) necessary ?
What would be your recommendation for a good free or inexpensive one that is
also safe ?
View 4 Replies
View Related
Nov 17, 2009
I am on Vista Home Premium at present. I bought the upgrade to Windows 7. I have two questions:
1) Is it true that when you upgrade from Vista to Windows 7, all of your installed programs basically remain intact and working, or do you have to re-install everything again from scratch? I believe that the documentation in the box said that if you are on XP, you would have to reinstall MS Office and some other programs. What is the situation in upgrading from Vista?
2) Partly in order to find out the answer to the above, I decided to upgrade my laptop first because it has relatively few installed programs on it compared to my PC. I tried on three separate occasions to do the upgrade. On each occasion, it went all the way through to the very end, completing all of the listed steps. However, it then stated that Windows 7 could NOT be installed on this computer and then unwound the entire thing, leaving me with Vista again.
Why, is a mystery to me because when I ran the Windows 7 Upgrade Advisor, it did not highlight any problems that would prevent the installation. Yes, it did point out one printer driver which might not work after the upgrade and advised me to uninstall it (which I did NOT do - might that be the problem?), but apart from that it seemed to be happy with the situation.
3) Do I really need a skilled technician to do this upgrade or can I not just do it all myself? If some major backup and re-installation of complex drivers is necessary, then maybe I need one. But is this really going to happen, or is the whole thing as self-explanatory as it seemed while doing it on my laptop?
View 4 Replies
View Related
Dec 10, 2009
I've upgraded all of my computers to Windows 7. Including my wife and children's older computer. I build all of my desktops myself so there's no particular model number or brand name for any of the desktop computers. After loading Windows 7 on my wife's machine I noticed that Windows 7 still seemed a bit sluggish. This is due to the fact that all of the hardware in it is pretty old.
So here are my questions. Is Microsoft going to give me a hard time for upgrading this computer after only a month of 7 use? Or am I going to be able to upgrade motherboard, cpu, graphics and memory with no trouble?
I should add that Windows 7 was installed using an Upgrade DVD if that helps.
View 4 Replies
View Related
Oct 24, 2009
On my laptop i have a limited amount of HD space i currently have 37 gb free of a 160 gb drive. After i upgrade to Windows 7 is there any way i can delete my old vista files? and if so where would they be located and is it safe to delete them?
View 3 Replies
View Related
Nov 16, 2009
I am going to dual boot Windows 7 (Home Premium) using a separate new Hard Disk Drive, with XP already installed on the old existing Hard Drive and using the instructions in this link:-
Dual Boot Installation with Windows 7 and XP
As it is the first time I have tried something like this could someone answer a couple of questions for me?
1: The XP drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus, together with any required software/programs, are already installed on the original XP HDD.
When I have installed Windows 7 on the second/new HDD, do I then boot the Windows 7 OS and install the Windows 7 drivers (Chipset, Graphics, LAN, Audio etc.) and an Antivirus together with any software I want to run on Windows 7 (even if that software was already installed previously for XP?) It seems funny having two sets of drivers (XP & Win 7) and Antivirus on the one machine.
2: XP runs all the programs that I need and I am just trying out Windows 7 at the moment so Win 7 restore points are not very important to me.
If that is the case, can I just ignore the fact that XP may delete the Win 7 restore points, in a dual boot, and not bother with the procedure (explained in the above link) to prevent this from happening?
To stop XP from deleting your Windows 7 System Restore Points everytime XP is started, then see System Restore Points - Stop XP Dual Boot Delete to hide Windows 7 from XP. I intend to drop XP and move over to Win 7 eventually so this will just be a temporary setup. Many thanks for any replies.
View 2 Replies
View Related
Nov 20, 2009
Homegroup or Sharing?
Which should I do. Its my home office computers. I'd like to be able to access files between both machines. Doing this, what precautions should I make that noone can get into my system? I'm a little hesitant to share ALL files on both computers between each other. But i'd like to!
I'm playing with Sharing now but i'm noticing that sometimes when I save a file on one computer it isn' accessible to the other computer until I right click and SHare it. I thought by sharing the folder it would just share every new file. Is there a way to do that?
View 4 Replies
View Related
Oct 27, 2009
I just a purchased a brand new laptop. I have had it less than a week and qualify for the windows 7 upgrade. I would prefer to do a clean install, but not wish to lose certain programs that came default on the laptop (ex: powerDVD for playing blu ray, will cost $160 to replace).
Questions:
1.) With my Vista install as fresh as it is ,will upgrading to 7 be that much worse than a clean install?
2.) If I choose to clean install, is there a way to recover the programs without a repurchase (some way to back up an installed program on a flashdrive in a way that it can be moved or installed on the new OS)?
3.) If i have to upgrade instead of clean install, will running a registry cleaning program like "Clean My Registry" clean out the goop left behind by Vista? Or will it likely cause more issues?
View 3 Replies
View Related
Apr 26, 2012
When a link is launched from IE9 and needs to open in a different application, then a couple of security questions are presented before launching it for the first time. How can I reset these questions? (the selection made) Preferably, just for that type of link. Or alternatively, for all such questions.
View 2 Replies
View Related
Aug 11, 2009
I currently have an old P4 running 32-bit Windows 7 RC. I don’t think I can put 64-bit on that machine, but I am considering 64-bit on the retail version when it is released in October. I tested about thirty 32-bit shareware and freeware applications on 32-bit Windows 7 RC and they all work well. My questions concern 32-bit drivers and unsigned 32-bit and 64-bit drivers on Windows 7 64-bit retail.
I have seen references to a BCedit command. I ran Bcdedit /set Bcdedit nointegritychecks ON on my Vista SP2 machine and it ran successfully. I have not tested what it will let me do as I now have no Vista driver issues. Here are my questions:
Which of these is the correct command to disable the signature check on Windows 7 RC?
bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS
bcedit –SET TESTSIGN NO
Is there any reason to use the correct command rather than using F8 during the boot process?
Does the correct command work for both unsigned 32-bit and unsigned 64-bit drivers on a 64-bit Windows 7 system?
Is the correct command useful on both 32-bit and 64-bit Windows 7 for driver signing issues generally?
I assume the command works for only 1 boot cycle. Given that, is there any reason to run a command to re-enable the driver signing check if one reboots again after the driver installation?
Is there any other solution other than third party software, which I would prefer to avoid as I don’t expect to run into a driver issue frequently?
What is a decent estimate of how many of my 32-bit applications that work well on 32-bit Vista SP2 will install and work well on 64-bit Windows 7 retail, assuming I use the correct command to disable the signature check?
View 3 Replies
View Related
Dec 20, 2010
i was really hesitant since XP worked what i at least THOUGHT was well. But Windows 7 is so much quicker and seamless. Anyways, 1st question is on XP i would drag a shortcut to the taskbar and it would then be usable and work as the original shortcut did. With windows 7 it doesn't wok.
For example, i have a text file that i keep on another drive and i put a shortcut to it on my taskbar. In XP i'd click it and the file would pop up as you'd expect. On windows 7 if i drag that text file to the taskbar, when i click the resulting shortcut instead of the file i just get a new empty notepad.
If i right click it (i THINK it was by R/clicking) then a list of various notepad files i've viewed pops up and i can choose it from there. But i just want it to be a shortcut to the particular txt file. Is there a way? second, i see shortcuts don't have the file's pathway or "address" if you will in them. I miss that for a number of reasons such as being able to tell where the file it's pointing to is, or adding switches in the target line etc etc. Is there a way to make them show the pathway?
View 9 Replies
View Related
Oct 23, 2009
1) I currently am running Vista on a laptop on which it is the only OS. I want to install 7 on a second partition for dual boot. However, to keep things tidy, I would like to make Windows 7 Drive C: (which currently contains Vista). Is there a way to image the hard drive then reload it onto drive D: after I install 7 on C:?
2) I guess my other option is to install 7 on the formatted HD, then create a D: partition to run the Vista recovery disks on at least that would restore my drivers, etc. But I really wanted to keep my current configuration around for those programs that are slow to catch on to the new OS. (Or do I even have to worry about this?)
3) If all this dual boot stuff is too complicated or if I really don't need to worry about the driver/software compatibility, I might just do away with that idea and clean install it on the C: drive and forget about Vista. (reluctant to do so since I rely on this computer for school). I will be keeping my C: drive image that I took yesterday so taht I can recover to Vista if need be.
Edt: 4) I just had anther thought. If I install Win 7 clean could I then take my Vista hard drive image and make it into a VHD? that would pretty much solve all my troubles I think. Unless I would need to reinstall Vista onto the VHD.
View 2 Replies
View Related
Oct 25, 2009
can someone please clarify a few things for me.
1. the upgrade disks and the full disks are exactly the same EXCEPT the upgrade one requires proof that you own a copy of vista or xp.
2. what kind of proof does it require? does it just ask you for an XP/vista serial during the install?
View 7 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
Dec 3, 2012
Any simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
View 5 Replies
View Related
Apr 10, 2012
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
View 13 Replies
View Related
May 25, 2012
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies
View Related
Nov 22, 2008
How to Create a System Image Backup in Windows 7 ?
View 0 Replies
View Related
Feb 20, 2012
Is there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.
View 2 Replies
View Related
Aug 23, 2012
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
View Related
Nov 1, 2010
Is there a way to use Windows Backup to backup to a network drive?
View 6 Replies
View Related
May 8, 2011
I backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies
View Related
Aug 8, 2009
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies
View Related
Dec 7, 2010
I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies
View Related
Oct 21, 2011
I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies
View Related
Apr 13, 2012
Currently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies
View Related
