Unable To Install Windows 7 64 Bit On Compatible System
Dec 25, 2012
my problem lies in the installation of windows 7 ultimate 64 bit on my system. I custom built this computer and after using the installation disk that contains both 32 and 64 bit. On my brother's computer we used this disk and it automatically installed to 64 bit without making us choose. However on my machine, it automatically goes to 32 bit even though all the parts are 64 bit compatible. how can I install 64 bit windows 7 to utilize all 8 gb of memory. I have tried reinstalling i using the disk multiple times, each time giving me the 32 bit system.
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
is it possible to copy a device driver from one system to another compatible system? I just installed windows 7 pro (64bit) on my Dell Optiplex 380, but no ethernet controller so i cant use it on a network.
A while ago, I upgraded to an SSD, and at the same time, I upgraded from my Win 7 Ultimat, 32-bit to the corresponding 64-bit. As I refuse to give up my Windows Natural Multimedia Keyboard, I did not install ITPx64_1033_8.0.225.0.exe (v. 8), because it does not accept PS1, which is the only connection on my keyboard. Note: I refuse to give up my keyboard because it is ergonomic, has multimedia keys, and is light gray?I have used ITPx86_1033_7.00.260.0.exe (v. 7) since then, and it has worked well. A while ago, it gave me problems, and I think I must have uninstalled it. When I am trying to reinstall, I get the error message "Setup cannot continue because this software is not supported on 64-bit operating systems."
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
I was going through uninstalling programs that were useless and a space waster, however accidentally clicked HD Conexant, and now the souns is terrible and SRS Labs "unable to find compatible SRS Audio Device. I Have a ASUS K52J series, and the website does not offer any clues to what was actually installed. How to restore my audio driver back to normal.
I'm going to upgrade my Dell XPS 420's RAM (Computer memory upgrades for Dell XPS 420 Desktop/PC from Crucial.com) from 3 gigs (2x1GB & 2x512MB) to 8 gigs. Will two kits of Newegg.com - AllComponents 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model AC2/800X64/4096-KIT work even though it is a dual channel kit? Also, according to the Crucial website this is the fastest RAM my motherboard can use, is this correct?
I'm trying to install Windows 7 on a Compaq Presario 2100 laptop with 1GB of RAM and known good HDD. I ran memtest 86 for 12 hours with no errors.The BIOS sucks and has no options for ACPI, power management, or even serial/parallel port addressing, only boot order, system info, and password. The only device option in the BIOS besides video memory (tried every setting there) is legacy usb support (tried that too). I've been googling for 2 hours about this and found the whole F5 and F7 thing for XP, but I'm not sure if there's a similar option in 7 to only use Standard HAL. There's no Press F6 prompt in 7 install to press F7 at.
I have an Asus k60ij laptop and all of a sudden this message appears when I boot up my CPU. I have recently wiped out my CPU. I have gone onto the Asus site and cant seem to find it. My CPU says that the mic is working properly but it doesn't pick up sound...my speakers and other sound seems to work though. The volume and everything is up on the mic, but can't get it to work...
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz nVidia GeForce 9800 GTX 512 MB PCI-e 320 GB Western Digital HD SATA 1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0 Processor Count: 2 RAM: 3575 Mb Graphics Card: AMD Radeon HD 6410D, 512 Mb Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB; Motherboard: Foxconn, A75M Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
I'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
NT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
I have made a reformat on my hdd to install Win 7. But during install this message comes" Setup was unable to create a new system partiton or locate an exsisting system partiton" And if I start my computer without a DVD this message comes in the end "BOOTMGR IS MISSING"
i've come across Age of Empires 2 and AoC expansion and want to play them, however get a graphics system error."Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"
My specs are:
Dell Inspiron 545 Operating System: Windows 7 Home Premium 64bit, Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @2.50GHz Memory: 6.00GB Graphics Card: ATI Radeon HD 4350
- I've tried to right click the shortcut and change the compatability to XP server pack 2, run as administrator, updated my graphics card drivers and downloaded the latest directX 11 from the Microsoft Website.
Just upgraded from Vista Business 32bit to Win 7 Pro 32 bit AOE working fine before upgrade but now error shown as:"Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"I've checked the drivers are the latest. Directx is ver 11. DirectDraw enabled. Video card is ATI Radeon HD 3650 with latest driver.Tried compatibility modes, disabling Aero, re-install AOE, XP virtual mode. Nothing works.
I recently reorganized my computer and this included a fresh install of Windows 7 on a new disk. I backed up all my data on the old disk so that I could make sure I wasn't losing any important documents or whatever.I'm now sure I've got everything off the disk that I needed and am using the disk as a storage disk for media. However, there are still folders that I can't seem to erase in the Program Files, Program Files (x86), and Windows directories. Most of the files are gone but about 12GB of junk remains that I no longer need. Whenever I try to delete what is left, it says I need permission from TrustedInstaller and it won't let me delete these files.Is there any way to blow these directories away without having to format the disk? I really can't format because the disk is almost full with data that I need to keep and I don't really have any other disks to temporarily back these files up to.
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive -Formatting using Hiren's bootcd -Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install) -diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I had windows xp on it, however due to a virus, it crashed. For time being I started using Ubuntu O.S. The grub shows windows xp and the Ubuntu. When I click on Windows, it tries to load and then blue screen.Now, I want to reinstall a windows xp on this machine, using my another laptop (dell) installation cd.The setup starts and after it loads some drivers and tries to start windows setup, I get a blue screen saying that I either have virus or I need to format the HDD.
I have previously installed Windows 7 and recieved the same error and tried it again and it worked, but the installation seemed unstable and I recieved many Blue Screen Errors. In an attempt to correct this I tried to reinstall Windows 7. In doing so I have wiped my hard drive for a fresh install.I placed the Windows 7 Installation DVD in and proceeded with the install. When I got to the 'expanding files 20+%' the installation stops and I recieve an error stating:"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"In an attempt to correct this I have transferred the files to a USB external hard drive and have got to the same point in the installation and recieved the same error message. My next step is to download an ISO off the internet and using this as my DVD might contain a corrupt file.