Unable To Install Windows 7?
Aug 29, 2012
I had windows xp on it, however due to a virus, it crashed. For time being I started using Ubuntu O.S. The grub shows windows xp and the Ubuntu. When I click on Windows, it tries to load and then blue screen.Now, I want to reinstall a windows xp on this machine, using my another laptop (dell) installation cd.The setup starts and after it loads some drivers and tries to start windows setup, I get a blue screen saying that I either have virus or I need to format the HDD.
View 3 Replies
ADVERTISEMENT
Jan 31, 2010
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
View 9 Replies
View Related
Aug 28, 2010
I have previously installed Windows 7 and recieved the same error and tried it again and it worked, but the installation seemed unstable and I recieved many Blue Screen Errors. In an attempt to correct this I tried to reinstall Windows 7. In doing so I have wiped my hard drive for a fresh install.I placed the Windows 7 Installation DVD in and proceeded with the install. When I got to the 'expanding files 20+%' the installation stops and I recieve an error stating:"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"In an attempt to correct this I have transferred the files to a USB external hard drive and have got to the same point in the installation and recieved the same error message. My next step is to download an ISO off the internet and using this as my DVD might contain a corrupt file.
View 9 Replies
View Related
Oct 6, 2010
I had previously been running Vista 32, however after reading up a bit (obviously not as much as I should have) I decided to upgrade my old machine with 4 gb of DDR2 (up from 2gb) and Win 7 64 bit. As can be seen in my system specs, my processor is a Pentium D 3.2 (840 i believe), and going on a thread a I read stating that a dual core can handle 64 bit I got that version. Install has been a nightmare, first it would give me an error that (according to forums) is a result of bad memory, tried everything with that (swapping out to my old memory that was fine, going from 4 to 2 gb... no dice) Next I took the drives out, and installed win 7 on them using a different machine (I have a much newer/nicer build as well, this is a second machine). Install went fine, so i moved the drives back to the other machine and I'm getting a BSOD on start up (and its a quick BSOD, cant even read it, flashes a second then reboots)... every time. I am a mouse click from ordering the 32 bit version but dont want to drop another $100 only to find out that maybe thats not my problem. Given that the machine was running fine with vista on it (even with the new memory) I am inclined to think this is not faulty hardware, just maybe incompatible software (the 64 bit version that is).
View 9 Replies
View Related
Aug 10, 2011
I'm trying to install a windows 7 home premium on a laptop but it wont let me.
when i put the CD in and boot from CD everything goes well it loads his files and i can select the language settings, than i click to install and i need to choose between upgrade and clean install, if i choose clean install the click to install window appears again, i can do this all day cause it keeps looping the same process.
i tried to install vista as well but same results than i thought lets install windows xp to do a upgrade install but installing xp wasn't successful either.
View 9 Replies
View Related
Aug 18, 2011
My laptop is a Dell inspiron 1545, not actually sure about other stuff of hardware.Sofware Windows 7 Home Basic with original dell Recover Cd.wo months ago, I was working in some homework when it freezes at all, and stays that way for about 10 minutes, so I force the shut down. When I restarted, It ask for a Start Repair, so I do, but It was unable to Repair... I mean, it was actually unable to enter to the repair options neither from the Repair CD... just freezes at the Win background image and no options shown... I wasn't sure what to do because I wasn't even able to format from the CD, I tried Live Cd's, but was the same problem, Win just didn't charge, so I download Ubuntu and decided to installed it over Windows after backing up all my files... then I run the Win Recover CD and reinstall Win 7... It was ok until yesterday, when the exact same problem began! The computer freezes, I force the shot down again (after nearly 5 hours, because I was afraid the same problem to happen and didn't want to format again and reinstall all my programs)... finally I've got the same exact problem, so I back up my new files and very unhappy try the past solution, only this time I wasn't able to Reinstall Win 7, even I format all partitions... I have being trying like 100 times and it always the same: the laptop freezes during installation (while compleating installation) and it's unable to do anything else, but reinstall Ubuntu.
View 4 Replies
View Related
Jan 6, 2012
doing a clean install of windows 7 home 32bit ,using gen copy of windows,asus pdg51 mother board,775 processor 4gb memory ,new dvd and wd 1tb hard drive install runs fine through up when trys to copyies the files etc then say unable to continue.
View 4 Replies
View Related
Jan 25, 2012
I recently decided to upgrade to windows 7 Professional 32 bit. Before I could do so however, I was interrupted by an error telling me that "Autorun could not be read because it is "Corrupted?". I run on Windows XP Professional x64. My computer is a Dell Inspiron 530;
4 Gigs of RAM
ATI Radeon HD 2600 XT
intel core 2 quad Q6600 2.4 ghz
View 9 Replies
View Related
Dec 18, 2012
I work on computers for extra income so I've installed operating systems numerous times but this one has me stuck. I received a Dell 700m netbook that need a clean install done, I was in the middle of installing Windows 7 when the power cord came loose causing the laptop to shut off without completing the install. Since then when booting from the hard drive I get a "windows failed to install" error message, when booting from the disk to try a fresh install I get to "starting services" screen at which point the laptop restarts. I've ran diagnostics on it, everything passed. Tried using repair disk, ran 3 times got nothing. Went to advanced startup and tried using cmd prompt but was given an error message.
View 5 Replies
View Related
Mar 27, 2011
Recently out of the blue my computer started telling me that the bootmgr was corrupt or missing.Since then I have tried every possibility to resolve the problem, including buying a new HHD.All seems well when I rewrite the MBR, no errors and the program loads. After that the MBR is messed up again - it's a nightmare
View 2 Replies
View Related
Sep 26, 2011
i tried installing windows on boot because of one of my partitions going to RAW so i formatted it i tried installing windows on two other hard drives same thing ut i tried installing windows on my laptop work perfectly during the installation this pops up i dont know what to do so can you please help me
"Windows cannot copy files required for installation. The files may becorrupt or missing. Make sure all files required for installation areavailable, and restart the installation. Error code: 0x80070241"
View 4 Replies
View Related
Nov 8, 2011
so I've got Win7 32-bit and Win7-64bit DVDs that are both unscratched and aren't missing any data. On my PC(information below), I can install 32-bit just fine, but I get an error when attempting to install 64-bit(in the "Expanding Windows files" section each time). I have 8GB of ram, a 1TB HDD(WD), I've had Win7-64 bit installed on it before(got accidentally erased when attempting to install Ubuntu Linux to a second partition). That's about all you should need to know.
View 3 Replies
View Related
Jun 11, 2012
Trying to install Windows 7 on a machine that currently has Ubuntu.Fort the install I'm using a USB DVD drive, but for some reason it won't install the system.Have changed the boot order in the bios, trying both USB DVD and normal CD/DVD but no joy - just loads Ubuntu from the hard disk.
View 8 Replies
View Related
Dec 23, 2012
I'm trying to install windows 7 through a bootable usb. When I get to "expanding windows files", the % stays @ 0. I've waited long with it at that point and nothing. Everything is being detected by my BIOS. no previous OS installed as it is a clean install.
Here's the build
asus m5a97 r2.0
fx-4170 4.2 ghz quad core
sapphire 7770 hd 1gb
1stick kingston 8gb ram 1.3333mhz
1tb seagate barracuda hard drive
lg optical drive
I'm really annoyed at this point. I tried to boot ubunto ( free os ) through a usb and it worked fine. I can't seem to get past the "expanding windows files 0%..." while trying to install windows 7. I've disabled all legacy usb3.0's. SATA ports set to ACHI. All that is connected is mouse keyboard and usb. Apart from all the components connected in the mobo This is my first time ever building a custom PC and this being the result really makes me angry ):.
View 15 Replies
View Related
Feb 5, 2013
i wanted to install windows seven on my system by booting from the cd rom but when it starts loading the files, it gets to a point where my system displays an error code.
View 2 Replies
View Related
Nov 16, 2010
Could not install windows 7 ultimate.Had first formatted hard disk. Started window on disk and has gone through all the steps except the last. Fail at one of the reboot during installation.
View 3 Replies
View Related
Oct 1, 2011
For several months I have had problems each day when asked to install "Windows Updates", some days I get 4 or 5 updates or more, for a long time it installed all except one. This has now expanded so I have three updates that will not install for some reason. It creates a restore point then tries and fails each time. I am using Norton Antivirus and have even disabled that, but I still can get the updates to install. I have never had this problem before. I also have a laptop and another PC computer that has done these updates, so why problems with this one? It's driving me crazy.I am enclosing a copy of the error message I get together with the list of failed attempts (only recent ones).
[code]...
View 9 Replies
View Related
Jun 20, 2012
I previously had iTunes installed on my laptop (see specs below), but when the newest version came out, I kept getting error messages (shown below) when I tried to update to the latest version. Therefore, I completely removed iTunes from my laptop with the goal of doing a re-install from scratch. However, I continue to receive the same error messages as before (I say "continue" because I've tried several times with the same result each time). The installation begins without any problems, but after a few seconds, I get the first error message (see below), and then when I click OK, it runs for a few more seconds, and I get the second error message (see below). I am not having any other problems with my system, and I have run several anti-malware and -virus scans to make sure the problem in not an infection?And, by the way, the same thing happens when I right click the iTunes set-up icon and select "Run as Administrator".
FIRST ERROR MESSAGE:
iTunes Setup Error Message.jpg 35.27K
7 downloads
SECOND ERROR MESSAGE:
iTunes Setup Error Message #2.jpg 35.11K
6 downloads
AFTERWARDS, THE FOLLOWING MESSAGE APPEARED:
iTunes Setup Error Message #3.jpg 48.42K
6 downloads
Machine Specs:
Sony Vaio SE Laptop 64bit
Windows 7 Professional
Intel Core i7 - 2640M Quadcore CPU @ 2.80 GHz
RAM: 8 GB
Network Card: Intel Centrino Advanced-N 6230
Display Adapters: Intel HD Graphics Family; AMD Radeon HD 6630M
View 2 Replies
View Related
Aug 3, 2011
I have a Asus Eee PC 1215N.I wanted a "clean" PC so I decided to format and reinstall Windows.
1)I have boot the "bootable Partition Manager" from a usb DVD device;
2)I have delete the 4 default partitions, then I have create 2 partition with NTFS file system;
3)I have download a Windows 7 Home Premium x64 ISO, then I write it on usb pen drive by Microsoft tool;
4)I have boot this usb pen drive; after some time, the PC show me a window for language select; I selected it;
5)Then it show me a windows with "Install now" button: I clicked it;
6)Then it show me this message: "Load Driver - A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now. Note: If the Windows Installation media is in the Cd/DVD drive, you can safely remove it for this step".
View 7 Replies
View Related
Oct 1, 2012
I have Windows 7x64 installed on my Lenovo G580 right now. I want to install Ubuntu 12.04 on my laptop. I made a bootable USB using unetbootin and tried to install Ubuntu. It installed correctly( I formatted a partition which i made specifically for ubuntu with 10GB Swap area and 20 GB for main Ubuntu installation).
After restarting i am not getting select os menu rather windows 7 starts directly
When I browse my HDD in windows 7 (My Computer-Properties-Disk Management), I'm unable to locate my hdd in which i installed Ubuntu, it just shows my other two drives thats C and D drive, the E drive which i used is not visible.
View 1 Replies
View Related
Jun 23, 2012
I have been trying for the last week to install Windows Updates KB976932 and KB2653956. I have received error codes 80246007 and 800B0100. For error code 800B0100 it was recommended that I install the system update readiness tool. I tried to install but I was unable to. For error code 80246007 it was recommended that I change or restart the Background Intelligent Transfer Service (BITS). I am still unable to to install these two updates.
View 1 Replies
View Related
Mar 29, 2011
I'm trying to install Windows 7 Ultimate, 64-bit on my desktop. I reformatted the harddisk and booted to the DVD. I've already checked the compatibility and was previously running Windows 7 Ultimate, 32-bit. In the computer properties, it did say that the processor (AMD Athlon 64x2) is capable of running 64-bit. When I boot to the DVD, it goes through the process and seems like it is working, but after a few automatic reboots, it just black-screens. At that point, if I reboot, it just black-screens again it.I am able to put 32-bit back on it, and it installs without problems, but am trying to get it setup to run SharePoint dev tools. Is there something additional I need to do to install 64-bit that was running 32-bit?
View 1 Replies
View Related
Jun 7, 2011
i have a 1315 hp printer. i downloaded the hp printing software from hp website for windows7 64 bit. during installation after the i agree page, the installation box suddenly vanishes. i tried disabling anti-virus but no go.
View 3 Replies
View Related
Jun 14, 2011
i have a problem in my desktop computer. here are my system requirements
processor: intel P IV Dual Core 3GHz
motherboard: Mercury Intel chipset 945
ram: transcend 2gb ddr2
graphics card: Palit GeForce 9400GT (1024 MB DDR2)
Hard disk: Seagate 500GB SATA (brand new)
power supply: Mercury 450W (brand new)
since i had a problem with the hard disc and power supply earlier, i had them replaced..now as i tried a clean install by booting from my dvd, it completed installation of windows but after the first restart it came to a blue screen where a process of "dumping physical memory to disc " reached 100% and the computer crashed.i left it on its own but it crashes again and again at the same blue screen...this is what the blue screen looks like
A problem has been detected and windows has been shut down to prevent damage to ur computer.If this is the first time you've seen this stop error screen,restart your computer.(which i did 3 times).If this screen appears,follow these steps:
Check to be sure you have adequate disk space(which i have 50GB).If a driver is identified in the stop message,disable the driver or
check with the manufacturer for driver updates(which i did not get).Try changing video adapters.
Check with your hardware vendor for any BIOS update(which i installed).Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced stratup options,and then select safe mode.
Techincal Information:
*** STOP: 0x0000008E (0xC0000005,0x8DD57062,0x8A6037A0,0x00000000)
*** igdkmd32.sys - Address 8DD57062 base at 8DC3E000, Datestamp 4a01d354
Collecting data for crash dump...
Intializing disk for crash dump...
Begining dump of Physical memeory.
Dumping physical memory to disk:100
Physical memory dump complete.
Contact your system admin or technical support for further assistance.
p.s. the disc i am using had earlier worked in my laptop without any problems & i have checked all connections, and there are no loose contacts..
View 7 Replies
View Related
Aug 20, 2012
Yesterday I attempted to install a few new components in my computer and have been having issues installing windows
New components
Asus M5A97 Mobo
AMD Phenom X4 965 3.4 Ghtz
Samsung 830 128gig SSD
In the system I have my previous working
Samsung DVD drive
500v power supply
Radeon HD 6850 graphics card
I do not currently have my 1tb Samsung drive connected I have the SSD hooked up in the first 6b/s SATA port and the DvD drive in port 2.BIOS finds the hard drive and the setting in BIOS are ACHI When I get to the windows setup screen where it asks me to pick the drive to install windows on I choose the SSD which shows 120g unallocated space,At this point I get a Windows cannot create partition error. I have gone into Diskpart and created the partition and set it to active and again tried to reinstall and get the same message?The first is Disk Read Error press cntrl alt del to reset and the second (which I only had happen once) the windows login screen came up, then flashed blue and reset the pc.I built a PC for my brother in law 3 weeks aho using an Asus mobo with the same BIOS screen, that install I had a fresh HDD and a SSD and it allowed me to install windows without a problem to his SSD (again from a burned ISO disk). I did not have to do anything out of the ordinary.
View 25 Replies
View Related
Nov 22, 2012
I am installing Windows 7 from a cd as an ISO file after using ImgBurn I have used many windows ISO files and installed from a CD. I am using a Windows XP ISO instillation right now.I have gotten through 75% of the installation. Past the part where you select which drive you are installing, I am putting the OS on my SSD and currently have XP on my hard drive just so I could use the Internet to do research.I get to the Updating Registry settings part, Windows restarts and continues to go to a black screen which asks me if i want to run in safe mode, safe mode with command prompt, last know good configuration everything I select it continues to do the same thing over and over.
I have disconnected the HD so its only booting from the SSD I have changed the settings in BIOS to boot from the SSD I have tried to BOOT from a USB flash drive nothing I do will work and I have spent about 8 hours in the last 2 days trying to figure this out....I know the computer is fine because I had a burned ISO of windows XP and that installed and is running fine.I believe the problem is Windows 7 is not fully installing... Not that it is installed and wont run properly
Phenom 965 BE 3.4
212 hyper evo
gigabyte 990fx ud3
gskill 1886mhz 8gb DDR3
( I have not adjusted the settings in BIOS and as of now it only reads it as 1600mhz, I want to get the operating system installed before I mess with overclocking but this could be an issue?)
1tb HD
120GB SSD
620w M2 Silent pro
Old 7950gx2 graphics card waiting on my 7970 on the mail
View 5 Replies
View Related
Oct 28, 2011
For testing i have used a one month trial version of windows 2008 R2 server.Now i need format that windows 2008 R2 version and install XP sp2 over it. when i am trying to install it , with out any boot from Cd option it is directly jumping to 2008 server OS.
View 8 Replies
View Related
May 7, 2011
All i get is vertical lines on the screen which are multicoloured. It tries to boot the cd but then seems to freeze.Could this be a hardware failure?
View 5 Replies
View Related
Sep 1, 2010
I have computer with Phoenix award bios utility v1.3 (945 platinum w7176ims v1.3). Im trying to install windows 7 but I keep getting "a required cd/dvd drive device driver is missing." this is after I press install now. Im stuck in select the driver to be installed window. I have 2 hdd 1 is 500gb and the other is 130gb. I try to browse and select the c drive or the d drive.
View 9 Replies
View Related
Apr 22, 2012
Using Tyan K8W Thunder s2885 in rack mount case. The board is over 10 years old. Dual AMD Opteron 250 processors, 64 bit. RAM 8 Gb. ATI Radion HD 3650, AGP. There is only the video card, driving a single LCD monitor, PSP mouse & USB keyboard, and the HDD attached to the board, no peripherals.I am installing Win 7 home Premium 64 bit. I have had Windows 7 running on this board for over a year, from an IDE 80 gig drive.I installed a new SATA 500 gb and have only that drive in the case.
I have to manually load 114R5_x64_15150_logo drivers for Sil Image SATA controller, from a USB drive. I have just spent a day learning about and using DISKPART to finally be able to start the install. The install starts OK, expands and loads files. About 2 minutes into 'expanding files' I get BSOD, STOP: 0x00000124,(0xFFFFFA800643F038,0X00000000B604A001,0X000000000000813)I have repeated the steps and reproduced the problem at about the same time into the install. I have no idea if there is a way to read/post a log. Since windows is not installed, there is not the usual dump available.
View 1 Replies
View Related
Feb 14, 2012
i had Windows 7 in my system but i wanted to format the drive and install a new fresh copy, so i went ahead and i started Windows 7 dvd and i have to mention that the hdd that i had my old win installed in was a partition of a 1tb hdd and it's divided into(195GB &750GB), so my system was installed in the 195GB partition. then i went into installation and i formated the 195GB hdd and when i hit next it gives me this meassage "Windows is unable to install to the selected location (Disk1 Partition1). Error 0x80300024".
View 9 Replies
View Related
