Is Creative X Fi System Compatible For Pc
May 2, 2012i lied the Creative Sond Blaster technology, i had saw it in my friends pc is it compatible for MSI G41m_P26?
View 6 Repliesi lied the Creative Sond Blaster technology, i had saw it in my friends pc is it compatible for MSI G41m_P26?
View 6 RepliesI recently bought a dell computer second-hand from my friend, who had XP installed on it. It came with a subwoofer and a set of 4 regular speakers. On it, he had installed a form of creative volume control in addition to windows volume. The way it worked was he had the windows volume set to 100% at all times, and the creative volume control around 3% for regular browsing, 10-25% for gaming and 50% or higher for rocking out with music. I recently acquired windows 7 home premium x64 and upgraded my operating system. My soundblaster card has all the necessary drivers and the audio is all hooked up properly, and the only thing missing is this form of volume control. After looking around for the old software and trying a few different freeware and shareware programs, nothing has pulled through for me;
View 1 Replies View Relatedis it possible to copy a device driver from one system to another compatible system? I just installed windows 7 pro (64bit) on my Dell Optiplex 380, but no ethernet controller so i cant use it on a network.
View 3 Replies View RelatedI have a problem with the driver "XFXA_PCDRV_LB_1_04_0000" or "SBXF_PCDRV_LB_2_18_0015" and when I try to install it, I got the error "impossible to detect a supported product from the system".
This is the hardware ID:
PCIVEN_1102&DEV_0001&SUBSYS_00201102&REV_00
PCIVEN_1102&DEV_0001&SUBSYS_00201102
PCIVEN_1102&DEV_0001&CC_040100
PCIVEN_1102&DEV_0001&CC_0401
What can I do?
I'm going to upgrade my Dell XPS 420's RAM (Computer memory upgrades for Dell XPS 420 Desktop/PC from Crucial.com) from 3 gigs (2x1GB & 2x512MB) to 8 gigs. Will two kits of Newegg.com - AllComponents 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model AC2/800X64/4096-KIT work even though it is a dual channel kit? Also, according to the Crucial website this is the fastest RAM my motherboard can use, is this correct?
View 1 Replies View RelatedA while ago, I upgraded to an SSD, and at the same time, I upgraded from my Win 7 Ultimat, 32-bit to the corresponding 64-bit. As I refuse to give up my Windows Natural Multimedia Keyboard, I did not install ITPx64_1033_8.0.225.0.exe (v. 8), because it does not accept PS1, which is the only connection on my keyboard. Note: I refuse to give up my keyboard because it is ergonomic, has multimedia keys, and is light gray?I have used ITPx86_1033_7.00.260.0.exe (v. 7) since then, and it has worked well. A while ago, it gave me problems, and I think I must have uninstalled it. When I am trying to reinstall, I get the error message "Setup cannot continue because this software is not supported on 64-bit operating systems."
View 3 Replies View Relatedmy problem lies in the installation of windows 7 ultimate 64 bit on my system. I custom built this computer and after using the installation disk that contains both 32 and 64 bit. On my brother's computer we used this disk and it automatically installed to 64 bit without making us choose. However on my machine, it automatically goes to 32 bit even though all the parts are 64 bit compatible. how can I install 64 bit windows 7 to utilize all 8 gb of memory. I have tried reinstalling i using the disk multiple times, each time giving me the 32 bit system.
View 4 Replies View RelatedI installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
View 8 Replies View Relatedthe bluetooth printer which is compatible for windows mobile operating system
View 1 Replies View Relatedi've come across Age of Empires 2 and AoC expansion and want to play them, however get a graphics system error."Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"
My specs are:
Dell Inspiron 545
Operating System: Windows 7 Home Premium 64bit,
Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @2.50GHz
Memory: 6.00GB
Graphics Card: ATI Radeon HD 4350
- I've tried to right click the shortcut and change the compatability to XP server pack 2, run as administrator, updated my graphics card drivers and downloaded the latest directX 11 from the Microsoft Website.
Just upgraded from Vista Business 32bit to Win 7 Pro 32 bit AOE working fine before upgrade but now error shown as:"Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw"I've checked the drivers are the latest. Directx is ver 11. DirectDraw enabled. Video card is ATI Radeon HD 3650 with latest driver.Tried compatibility modes, disabling Aero, re-install AOE, XP virtual mode. Nothing works.
View 3 Replies View RelatedMy gateway p fx gives audio trough hdmi fine by using the integrated in audio card.
I'm looking forward to buy an X-FI card and was wondering if i connect the laptop trough hdmi will i run into some issues? will i hear audio even if i use the creative card?
So these just popped up in windows update today, and I'm wondering, my sound performance is fine right now, do I risk this driver update? Is it solid?
View 3 Replies View Relatedhas anybody had any luck getting the creative remote to work? i have the Audigy 2 ZS with the RM1500. no luck yet.
View 1 Replies View RelatedI am running Win 7 RC 7100 x64 and will be installing Win 7 Pro in a couple weeks. I have a Creative X-fi PCI card. It's the OEM card from Ailenware. (got it @ Micro Center for $10) Ailenware's site only has a Vista x64 driver which will not install on Win 7. The driver from MS update is installed and I do have audio, however the Creative control panel will not work. When I try to start it, it says "no compatible device found" and then closes. Everything works great when I use Vista x64 but I can't seem to get it right on 7.
I tried downloading the driver in the sticky but when I click download it sends me to another page. Anyone know how I can force the Ailenware driver to install or maybe another link to dl the driver in sticky? Or maybe a way to get the Control panel to recognize the device. I really only want the control panel for loudness equalization. Many of my MP3s have different degrees of loudness. Often, when it shuffles to a new song, the volume goes from decent to ear bleeding level and sometimes drops to barely audible.
I have problems with my soundcard, all drivers seem to install correctly, both from original vista disk, and from the latest 2.18.0010beta drivers from creative. however i get problems with playback, crackles through the speakers, faint sounds, sound cutting out etc etc. doesn't sound great through 5.1 ...
does anyone have this card with or without the above problems on windows 7?
So my creative sound drivers (newest from the website) only seem to be running at 32 bit. Is this going to affect sound quality or cause problems at all? Is there any way to get them working at 64 bit? Will this affect performance in games? I can't use the beta drivers that are posted because the X-Fi Titanium isn't listed there (unless there was an omission).
View 0 Replies View RelatedI've been a long time M-Audio Revolution user - but discovered recently that what I thought was surround all these years was matrixed surround (Stupid me ). Anyway, I looked at a billion sound cards (A lot anyway) and didn't find any that sounded perfect. But gaming is a priority and so is surround support via an external receiver, so I thought I'd give this Creative a shot despire the horrible rep because of it's local availability (easy return) and it does everything I need (DTS Connect and DDL encoding). People also hyped up EAX to some astronmical level, and after seeing some examples on the Creative site I thought it would be impressive. So I popped in BF2, a game that supports EAX 5.0 - set all in-game and external settings for EAX on and at normal levels...nothing. The guns sound identical if I shoot them in a small room or of I shoot them in a large open field.I tried new drivers (Was very nervous to do so, but it didn't break anything - everything works good on my Win 7 64-bit PC so far *fingers crossed*) and that didn't do it, adjusted settings (It was on the Game mode already), I tried turning it on and off and comparing - I can't hear anything! I am using the encoder to get DTS Digital out of my Logitech Z-5500 speakers - but does this somehow mess up EAX? Do I need to run something first like ALchemy to make EAX work? I thought it was as easy as click the box and start gaming...but silly me it isn't. I now know EAX is a largely dead technology, but it irks me highly that it isn't working properly on the games that support it - I'd really like to sample it first hand but either it makes a miniscule difference or it's not on..
View 9 Replies View RelatedSome thing crazy happened after I installed the X-Fi soundcard. I disabled the onboard sound and install the sound card. When win 7 booted the windows generic drivers were installed. I tried out my music and all I had was the windows system sounds, when I tried to play an MP3 windows media player got a error and could not play the file. VLC would play it but no sound was heard. When I load the new 64 bit creative drivers I got no sound from anything. I finally went back to the onboard sound and pulled the card out. Has anyone experienced this problem?
Win 7 Prof 64 bit
8 gigs kingston 6400 DDR2
Gigabyte P55-UD4P
Intel quad I 7
Geforce GT22o
500 gig WD sata Drive
Greetings to all, is there any one out there who has developed any drivers for the Creative DVB usb TV under Windows 7
View 2 Replies View RelatedI just installed Windows 7, and I'm loving it so far. However, I am having a slight issue with my Creative X-Fi Titanium (Newegg.com - Creative 70SB088000004 7.1 Channels 24-bit 96KHz PCI Express 1x Interface PCI Express Sound Blaster X-Fi Titanium - Sound Cards
My Headset: Newegg.com - Creative FATAL1TY 3.5mm gold-plated Circumaural Gaming Headset
My Problem:
First, my Line-in connection doesn't seem to work. When I open up the 'Recording Devices' tab under the Sound dialog, and breath into my mic or make noise, none of the volume bars go up. I've already checked and my headset is in fact plugged into the correct port. Playback is working fine. The current drivers installed via a Windows Update are '6.0.1.1323' published on '7/15/2009'.
Under the 'FlexiJack' option under my Audio Control Panel from Creative, I've been able to select the 'Microphone' Radio Button and get my mic to work. Unfortunately, doing this seems to get rid of the 'What U Hear' feature.
Even though I can get my mic to work, I'd like to find a way to keep the 'What U Hear' feature. Are my drivers the problem? Could my headset be damaged? The latter seems unlikely since I can get my mic working through the 'Audio Control Panel' from Creative.
my Windows 7 x64 (7100) found after a clean install new optional updates which included drivers for my soundblaster X-Fi Xtreme Audio. I also used the drivers I got with the cd and installed them on my system. Everything is working now except a few options. I get sound in 5.1, but when I select options like X-Fi Crystallizer, X-Fi CMSS-3D or just change the volume bars (FL, FR, RL, etc) nothing happens!
Before I installed Windows7 x64 I was using Windows XP Pro x86 without any problems. When using the above mentioned options they did changed the sound.
Is it possible that I've to download drivers by my self instead of the Windows updates one?
Does somebody know what I'm doing wrong?
Seen this enough here and elsewhere with people not knowing or understanding the differences between the different cards. For example have seen too many instances of someone recommending regular X-Fi drivers with the Xtreme Audio. With that said here we go,
1. Audigy SE/LS/Value, X-Fi Xtreme Audio and the Sound Blaster 24 bit
All of these cards are virtually identical hardware-wise, and for the most part the drivers are interchangeable. The only thing the Xtreme Audio has over the others is that it gets to use some of the X-Fi software (and supports Entertainment mode only). Drivers for all of these cards can be found on Creatives support pages,
-------------------------
Creative Worldwide Support > Sound Blaster
http://support.creative.com/Products/Products.aspx?catid=1
-------------------------
the Audigy and Live 24 bit can be found by using the "If your product is not listed above, please click here." link at the bottom of the page. Alternatively you can also try/use the Daniel_k package,
------------------------
SB P17X Series Support Pack 2.0 (07/31/2009) - Aud... - Creative Labs
http://forums.creative.com/t5/Sound-Blaster/SB-P17X-Series-Support-Pack-2-0-07-31-2009-AudigySE-Value-LS/td-p/533291
------------------------
Filefront mirror - Download P17X_SupportPack_2_0.exe
http://www.filefront.com/14952823/P17X-SupportPack-2-0.exe/
------------------------
that has been modified to work with all the above cards (single installer and driver) as well as return the use of some of the applications that used to work in XP (and Vista if the card was bought recently enough and came with Vista drivers on the CD).
2. The Audigy 1, 2 (all, including the 2 Value) and 4 series. These cards again all use the same driver and can be found through the saem link as above. And again there is also the Daniel_K driver set,
----------------------------------
SB Audigy Series Support Pack 3.6 (11/09/2009) - Creative Labs
http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6-11-09-2009/td-p/540934
----------------------------------
Filefront mirror - Download Audigy_SupportPack_3_6.exe
http://www.filefront.com/14930847/Audigy-SupportPack-3-6.exe/
----------------------------------
and will not work with any of the cards from #1.
3. Original X-Fi series and the new Titanium series. Again latest drivers as well as some of the applications can be found on Creative's site, as well as the daniel_K set,
-----------------------------------------------------
SB X-Fi Series Support Pack 2.0 (05/15/2009) - Creative Labs
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-15-2009/td-p/527485
------------------------------------------------------
Filefront mirror - Download XFI_SupportPack_2_0.exe
http://www.filefront.com/14952787/XFI-SupportPack-2-0.exe/
------------------------------------------------------
Again like the regular Audigy drivers, these will not work with the Xtreme Audio.
4. That leaves the original SB Live series of cards. There is not now and never will be any support for these cards from Creative, and I really wouldn't expect them too considering most of these cards are from the Windows 95/98 era. For anyone with one of these cards the only option you really have (applies to Vista as well) is yet another Daniel_K modified driver set,
-------------------------
SB Live! series Support Pack 1.5 (08/09/2009) - Creative Labs
http://forums.creative.com/t5/Sound-Blaster/SB-Live-series-Support-Pack-1-5-08-09-2009/td-p/533861
-------------------------
Filefront mirror - Download SBLive_SupportPack_1_5.rar
http://www.filefront.com/14932269/SBLive-SupportPack-1-5.rar/
-------------------------
See post #10 for how to install these drivers manually.
Updated link for #2.
my problem is i keep deleting / uninstalling my Soundcard and its programs but when i reinstall i seem to be having this same problem saying The audio device is not supported by this application will now exit.
Sound card - Creative SB-XFI Titanium Champion series
Creative SoundBlaster 5.1, got a problem installing with driver, any solution? i check the creative site, they don't seem to have an installer for my sound card?
View 2 Replies View RelatedI had noticed that a lot of people first had sound issues with their Creative X-fi soundcards. Most of them sorted it out by running the Creative drivers in Vista compatibility mode, or by installing the support pack released by a member on the Creative support forums.
The problem for me is that when I do a fresh install the drivers (either the official or the support pack) I can hear sound properly from the speakers before the computer restarts. However once I restart to complete the driver installation, the sound is gone once Windows loads again.
If I do an uninstall of the drivers from device manager the sound comes back once again, but once I restart it is gone again.
I can't explain this weird behavior but think somehow Windows is overwriting the drivers after a restart. I'm just wondering if anyone hear knows why this is happening the way it is?
I currently have a Creative X-fi Xtremegamer fatality pro, and 4GB ram. I also have a leadtek winfast pvr 2000 which installed properly and works fine (aside from no audio) so i'm wondering if that might be conflicting some how.
I have that sound card. I install the latest driver from Creative which is version 2.18.0013. Installs fine, reboots, then the AutoUpdate program comes up to install all the other applications for my device.
However, if I try to run like Creative Audio Control Panel, which got installed during driver installation, it says "The audio device supported by this application is not detected. The application will exit." Even if I install the other application, it will say almost the same message, when I try opening most of them.
I have researched this and contacted creative, but they are never no help, and from what I understand, lot of people are having basically the same issue with the drivers compatibility in WIN 7? Is that correct?
Does anyone know of a solution or do I just have to wait?
I have checked all hardware installations, and they are all good. This worked on Windows Vista x64 with my current system.
I got a hold of the Windows 7 RC (x64) Build 7100 yesterday and since then have tried many different drivers with no result. At first when i reboot my computer i get a pretty bad sound at startup when i play a mp3 song or open a video but the sound totally disappears after 3-5 seconds to never come back again until a new reboot. Anyone mind helping me that have got things to work out with the same card? Got a nforce 430 motherboard if that does any good.
View 5 Replies View RelatedI have a Creative XFi Exterior Sound card installed on my Windows 7 (64) bit system.Device manager is telliong me the SB XFi is there, I have down loaded every driver, I've checked everwhere I can but i still get this message: - Setup is unable to detect a supported product on your system.Please ensure your product is properly installed before running this Setup Program.
View 7 Replies View Relatedonly one speaker is working other 3 speaker is not working.
View 1 Replies View RelatedCreative cam live software, Have a web cam and am looking to download some software don't know which to choose?
View 1 Replies View Related