USB Hub Port Power Surge?
Nov 2, 2012
Well I just got a brand new medion computer (4GB ram, 1GB nvidia graphics card, dual core i5 3.0Ghz processor, etc) about 3-4 weeks ago and have had no problems till now. The problem is when i bought the computer i got a mouse and keyboard which worked with it till about 2 days ago. I have 3 USB 2.0 and 3 USB 3.0 slots and. 2 of each type are on the back and the remaining 1 of each are on the front. Now, anytime i plug both the mouse and the keyboard into the back i get a warning message at the bottom right saying "USB hub port power surge" or something along those lines and neither device works. But if i un-plug them both and plug back in the keyboard, the keyboard works. I have tried restarting my computer. I have even tried turning the computer off, un-plugging it from the wall. Than holding the power button so it quickly flashes on and than off again (I hear this resets usb ports Link: Reset of USB port after probable power surge ) I than plug the computer back in and start it up but still neither devices work unless i unplug the mouse. I have also tried plugging in memory sticks and other devices and they work until i plug the mouse in beside them. Every now and than they un-expectedly decide to work together and than stop as randomly as it began.
View 4 Replies
ADVERTISEMENT
Mar 23, 2012
i used headphone that has a usb, whenever i put the headset in my laptop, its says power surge hub port
View 1 Replies
View Related
May 23, 2012
Power surge on hub port?
View 1 Replies
View Related
Mar 16, 2012
So I had a power surge a few days ago and it fried a lot of devices in my house including my external HDD controller/charger so I removed the HDD from it's case and mounted it in my PC. So far so good, it was recognised in BIOS, my primary Master and my former ext.HDD Slave, boots up ok but when I go in the explorer I don't see the partition. I encrypted it with BitLocker when it was used as an external USB HDD.Now when I go into Disk Manager the disk is seen as online with 465 GB of unallocated space. Is there any chance I can recover the data on it ?
View 5 Replies
View Related
Jun 19, 2011
the reason for power leaking through body/USB/Fireware port of my PC& pl also tell the procedure to correct the difficulties.Will this leakge can damage my fireware sound card? Is it the reason for which fire ware solo sound card suddenly stops working? After shut down of PC only its work.
View 6 Replies
View Related
May 16, 2011
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies
View Related
Mar 24, 2012
I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
View 3 Replies
View Related
Jul 15, 2011
im having the port error of 01.
View 3 Replies
View Related
Jul 1, 2012
my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
View 2 Replies
View Related
Jun 27, 2012
I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:
1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?
2. What are the implications of using the options available:
a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.
View 3 Replies
View Related
Jun 9, 2011
I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?
View 1 Replies
View Related
Jun 16, 2012
i've tried to set the option for pressing the power button to 'Do Nothing' so no body can shut the computer, and yet it shuts down by pressing the button, so why is that and how can i work this out?
View 1 Replies
View Related
May 2, 2012
Over the past 2 years my PC has been afflicted with random power off/power on/reboot events.It will go for months without these and then have multiples of the events in a day. (I had 8 of them 3 days ago.)I assume I have a hardware problem, but nothing has been found and I'm grasping at straws.The time between power off and power on is several seconds.I had assumed this rules out a software cause, but maybe I'm wrong. I know Windows can schedule a power off, but can it tell BIOS (or something) to power back on in a few seconds?I know blaming the power supply is a much more simple explanation, but then I'm left with explaining the intermittent nature of the failure.
View 9 Replies
View Related
Dec 23, 2010
From many days the battery icon is missing from the taskbar, the notification icon is greyed out even if the laptop is not on AC. i followed the the tutorial System Icons - Enable or Disable but nothing happened.
View 3 Replies
View Related
Mar 17, 2012
My computer wouldn't shut down, even with holding in the power button, and so I just let it run out the battery. Then it wont turn on. I tried holding down the power button to clear out any charge that might be remaining. I have managed to get it back on, but I have to make a connection at the clip where you plug the power button ribbon into the mobo. Also, this is the second time I have had to do this. The computer works fine afterwards...or seems to anyway.
View 1 Replies
View Related
Oct 23, 2012
Suddenly pc doesnt boot up we change with new psu and from that time pc power up by the time we connect the psu with power ,
i remove all cables i left connection psu with motherboard but still the pc power up by him self , i remove the cpu and then didnt power up ..
View 1 Replies
View Related
Jan 27, 2013
My daughter has a Hp laptop and it was working fine, but the screen was coming apart. so my husband put it back together, Now it will not come on. It's getting some power but not coming on at the power button. The lights flashes when you push the button then nothing.
View 1 Replies
View Related
Aug 23, 2009
How to Create a Shortcut to Change Power Plans in Windows 7 ?
View 0 Replies
View Related
Sep 4, 2009
ok well i spent about 3 hrs and i know its not my router and its the os and i did a fresh install too im on 7600 rtm, now i got windows firewall and defender disabled, i got nod32 antivirus not with a firewall just the anti, now i got utorrent, so i use utorrents port checker, the port works for it but if i add a port to my portforwarding on my router it dont work, according to this port scanner, now if i enter it and use it as my port in utorrent it works! but anything else doesnt i dont get it i got windows firewall disabled and all that i literally think theres a hidden firewall or a virus but i know there isnt a virus i also did a scan incase so any ideas?
View 1 Replies
View Related
Nov 30, 2009
I literally cant press the "change settings" button in windows 7, (im using windows 7 RC), its dull and theres nothing i can do, trying to connect to spore if your wondering.
View 3 Replies
View Related
Oct 4, 2011
My computer crashed about a month and I want to format it. When I plug in the keyboard to go into bios it does not work. if i plug in anything at all it doesnt work, every usb port that is.
View 5 Replies
View Related
Feb 17, 2011
Last night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v. Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought
im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen! Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)
I could figure this out on XP but windows 7 seems beyond me atm!
View 1 Replies
View Related
Sep 2, 2009
I have some crazy problem with port 80 . Everything was fine since last 5-6 days. When i try to connect to some pages i get this note on picture.
i tried every posible browser and same thing ! also tried disabling firewall and nothing ...problem is still here! this is only one of many pages that i cant load.
View 6 Replies
View Related
Aug 1, 2011
To all the computer geniuses out there, I guess this isn't a windows 7 problem but it's about drivers.I have an Asus K53E-B1 with Windows 7 64bit. It comes with 3 USB 2.0 ports and that's it. I went on the Asus website today and found USB 3.0 drivers update.I can't just download those drivers and use them and expect USB 3.0 performance when I have USB 2.0 ports right?
View 4 Replies
View Related
Jan 28, 2009
I just installed Windows 7 and updated all my drivers. I am missing two drivers, and I don't know what they are:
PCI Serial Port
PCI Simple Communication Controller
What exactly are these? I own a Lenovo X200 Tablet. Any ideas where I can find the drivers for these two things?
View 6 Replies
View Related
Apr 5, 2011
I have a quick question about the USB ports on my computer. I have a screenshot hosted here on Flikr: USB | Flickr - Photo Sharing! Of the 5 USB's that are listed, one is a USB2. Is the USB2 Enhanced Host Controller a USB2.0 port? I am looking because I am going to buy an audio interface and if I have a 2.0 in there then I will get something a little better 'cos I want as little latency as possible when recording vocals.
There is one other thing also, if it turns out that there is a 2.0 port, is there a way to physically differentiate which port is the 2.0? I have 3 USB's on the back and 2 on the front of my tower. At the moment I don't know which is which and do not know what to physically look for when I look in or out of the case.
View 3 Replies
View Related
Oct 3, 2011
I have an application to control external devices via IRDA.The application only accepts IRDA connected via a serial port.I only have a USB-IRDA device.
Is there any freeware driver/software to create a virtual serial port and link it with the USB device?
View 1 Replies
View Related
Oct 30, 2009
is it impossible to open a port in mobile broadband with HUAWEI E156G ?
View 7 Replies
View Related
Nov 28, 2009
New PC has a 1394 Port.
Familiar with the USB Ports of course, but have never used a 1394 Port.
What and where is it used ?
For what ?
What devices should utilize it ?
And whatever else I'm not sharp enough to know to ask about these Ports, please ?
View 2 Replies
View Related
Dec 2, 2009
I use my computer aboard a 47' Sailboat primarily for navigation and communications. As such, I run multiple external devices. To name a few:
WiFi Cards (2)
GPS
Pactor Modem
Iridium Satellite Phone
Verizon Aircard
Telcel Aircard
You get the picture. I was unable to accomplish a very simple task using VISTA, to wit, being online with my Verizon Aircard and using one of the WiFi cards to access my wireless printer.
I finally downgraded to Windows XP and this is never a problem anymore. A Verizon tech once gave me an explanation of why this couldn't be done in VISTA, but unfortunately the explanation went over my head.
Does anyone know if this problem has been fixed in Windows 7, or does that OS have similar problems as VISTA handling multiple communications devices operating simultaneously on different USB ports?
View 1 Replies
View Related
Dec 16, 2009
I have spent the last two hours trying to open a port for a remote control application.
I have tomato 1.27 running on an asus wl500gP router.
I am running windows 7 ultimate
i have an Arris voip modem through comcast
The problem is this, i forwarded the port correctly in tomato yet the port is still closed. I have tried the following:
Enabling DMZ
Disabling windows firewall by either the control panel or through services.msc
Enabled UPNP in the application, it opens the port according to tomato yet external port testers still say its closed
reset the router and pc numerous times
hard reset the router
Hooking PC directly into cable modem
I believe that this is strictly a windows 7 issue now as the router is out of the equation. The only security software I have is Avira free edition, windows defender, and (disabled) windows firewall.
Can anyone give me help as to why I cannot open a port? It would be greatly appreciated as I am leaving for a trip in 36 hours and would like to be able to remotely control this application.
View 0 Replies
View Related