USB Midi Won't Work Anymore
Dec 27, 2011
I'm having problems getting my Usb MIDI to work in my music software. It used to work, but one day it just magically stopped working. I was about to make a dumb mistake and buy a new $60 Usb MIDI cable, but then I checked in device manager and I noticed that Windows WAS recognizing the Usb MIDI cable. It even said "This device is working properly." The MIDI Input light on the cable blinks when I press the keyboard's(piano) keys when I first plug it in, then stops after a while. It's supposed to be plug-n-play. When I first got it, no driver download was needed. I plugged it in, and it worked. I was thinking it may need a driver update? Or maybe a new driver? [code]
View 3 Replies
ADVERTISEMENT
Dec 16, 2009
I've been in contact with MS Support, about that in the Windows 7 Sound panel there is no longer the ability to change MIDI Port from the internal GS Wavetable synth, and got confirmed that they've removed this, both for Vista and Windows 7"The ability to choose a different hardware or software MIDI synthesizer other than the default Microsoft GS Wavetable Synth has been removed from the user interface for audio configuration in Windows Vista/Windows 7. A different output MIDI synth or output device port can be selected only by editing the registry".I really want to select the MPU-401 compatible MIDI Port, so I can make use of my old Roland MT-32 and the old Sierra games through DOS-Box
View 9 Replies
View Related
Dec 4, 2012
The other day i had a friend delete some programs from my Asus laptop on startup and running processes to make my computer boot up faster. I think we did something that makes the fn key not work anymore. how to restore this functionality?
View 1 Replies
View Related
Nov 1, 2009
My usb ports (3) wont work. Nothing is recognize anymore. When I go in Device Manager, under universal serial bus controller, I have 5 tiny triangle with exclamation points.
When I check the specs it says:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19).
View 2 Replies
View Related
Feb 17, 2012
I've only had my new computer with Windows 7 for just over a week and it won't work anymore. It goes into Startup Repair and says it can't repair this computer automatically. I press "Finish" and then it just restarts again showing the logo of the motherboard on screen and then goes back into Startup Repair again.
I called the shop where I bought it and they said it is possible I was loading too much software on too quickly. It is a computer I use for business so I wasn't loading any rubbish on and I didn't install that much - Office suite, antivirus, modem software, printer driver.
View 9 Replies
View Related
Jul 29, 2011
I went to plug in a CF card into my system as I do weekly to download pictures and windows says I need to format the card (it is formatted and there are pics on it) when I tried to format the card via windows it won't format the card. When I tried to hook the camera up to the PC using a USB cord it said the same thing. And when I plugged a flash drive into the USB, it also has the same error. Device properties show an exclamation mark by all the drives exceot my hard drive.Is this most likey a driver issue? If it is, would using my win7 disc and doing an install over the current Win 7 fix the issue? I'm not super technical to trying to fix the USB drivers themselves is not really in the cards.
View 4 Replies
View Related
Jun 19, 2012
Now, I want to make some more and I CAN NOT for the life of me do it anymore. I do have to admit that I searched for the right paths to get them right, but now, I can't get it anymore. Is anyone able to tell me how to make a favorite into an RSS feed?
View 2 Replies
View Related
Apr 10, 2011
My sis's laptop ran into this issue recently.
Whenever she presses "print" in any program, be it Word,Notepad etc, the program will just crash and not respond.
View 7 Replies
View Related
Sep 22, 2011
The way i connect to my XP network is i open explorer and click on the Network folder icon. Then i wait for the green search bar to do it's thing at the top of the screen and when it detects the XP computer, it will show XP under Network and i can access it.Well it stopped. No matter how many times I clicked on Network the green search bar only searched once after a reboot and it would not find the XP drive.After searching I found that you could open the drive by typing in the start menu's search bar, \NAME. This worked fine, so I am able to access the drive but why don't it work with the Network folder in Explorer anymore? After I open the xp drive this way, it will then magically pop up under the Network folder but not before.Also is there a way to create a shortcut to this drive? I don't see that option by right clicking on it.
View 1 Replies
View Related
Mar 11, 2011
The problem appeared in two different laptops (Lenovo and Fujitsu). The bluetooth hardware is not visible in device manager anymore, but unrecognized device appeared. Driver reinstall doesn't help. Driver installation setup says there is no bluetooth hardware. PC Suite is installed , worked fine before.
View 1 Replies
View Related
Nov 12, 2010
Yesterday night I turned off my computer by pressing the power button and now my mouse and keyboard do not work anymore(in Windows). I wanted to see if it was just the mouse/keyboard itself, but I noticed nothing detects when I connect a USB device. I tried plugging it in every port and it's the same. I thought it was a hardware issue, but now I realize that it is not.
I restarted my computer and tried to get into safe mode; it worked(I was able to go up and down to select which mode I wanted to enter). Once inside safe mode and windows is loaded, the keyboard just freezes. It does not work at all. I then decided to go into bios to see what is up and everything seems right. I even screwed around and messed up my overclock settings.
So now I know my keyboard still works and it's probably a Windows issue. I wanted to see if my mouse would work. I went into Windows Repair(I might have gotten the name wrong) and voila, my mouse worked!
View 6 Replies
View Related
Jun 26, 2009
I have a Roland PC-200 mkII midi controller connected to the PC via a MIDI to USB converter. The system claims to recognise it, and sets up a USB2.0-MIDI device with two hardware items: USB Composite Device and USB2.0-MIDI (sound, video and game controllers).
The keyboard is recognised - and sends MIDI signals. However, it will only send one at a time now, meaning it will only play single notes rather than chords. This is independent of whatever programme runs with it, indicating that it's a problem between the keyboard and Windows 7. The keyboard worked properly on Vista32 and previously on XP.
My mobo will not accept a direct MIDI (game port) connection, so I have no choice but to use the converter.
Am I missing any settings in Windows 7?
View 0 Replies
View Related
May 29, 2011
I have a Yamaha YPT-300 model keyboard that I am attempting to hook up to my Windows 7 Home Premium 32 bit machine via a MIDI-to-USB cable. (The cable came with this eMedia USB MIDI Keyboard Interface Kit.) The drivers for the USB/MIDI cable installed without issue, but my system does not appear to recognize the Yamaha keyboard. I attempted to install the Yamaha USB-MIDI driver, but it raises an error. ("Error 25001. No device is connected. Connect a device, and try again.") The MIDI/USB cable has two lights that blink when everything's working properly; one of the lights is blinking, the other is not. The light that isn't blinking appears to be related to the plug for the MIDI IN jack on the keyboard, if that helps. Some of the simpler stuff ... I've got the MIDI IN and MIDI OUT cables plugged into the right jacks on the keyboard. (i.e., the MIDI IN plug goes to MIDI OUT jack, and vice versa -- it makes sense when you think about it.) The cables are not loose. I've googled all around for an answer, but I've found nothing but dozens of topics with no solutions or topics addressing something else altogether. And yes, I have tried turning it off and on again.
View 2 Replies
View Related
Jul 6, 2011
I've been having a major problem with for over several months. I've recently started to make music and I'm interested in using some of the MIDI capabilities on several of the instruments I have, mainly drum machines and synthesizers. The problem is Windows 7 is not detecting these MIDI to USB interface devices and instruments I have.I've tried using three interface devices so far with no luck what-so-ever. I've tried different two types of MIDI to USB cables, these are generally small, and they both work because I tested them on my friends Macbook and they were 100% functional.So, I decided maybe I should get a better piece of recording equipment, thinking there would be better platform support, so I purchased a Focusrite Saffire 6 USB, low and behold, I had the same problem!The MIDI to USB cables and the Focusrite interface detect the MIDI IN coming from the MIDI OUT port of the instrument, however Windows is not reading the converted MIDI information running through the USB cable into the computer.Here's a list of the solutions I've tried.Updating my chipset drivers. Uninstalling and re-installing chipset drivers. Un-installing and re-installing my sound drivers. Using the latest USB drivers (and even beta drivers) and utilities provided by the interface products. Trying different USB ports assuming it was a power issue. Uninstalling and re-installing the product drivers, rolling back to older drivers as well. Updating Windows. Tested under two different DAWS; CuBase and Sony ACID. I also tried different stand-alone soft-synths, they didn't detect the MIDI devices either. I've tried a few obscure MIDI drivers I dug up from a few places, but to no avail, I un-installed them. I've tried sacrificing 3 goats to Microsoft, that didn't work either. I'm convinced that this is a Windows / Hardware compatibility issue. I'm tempted to get a Mac product so I don't have to worry about this time pilfering fiasco. If anyone would like to take a stab at this I would be very grateful.Here's my system specs:
[code]...
View 2 Replies
View Related
Apr 1, 2012
I tried to attach a M-audio 88es USB MIDI keyboard to my Dell Studio 1747 laptop (Windows 7 Home Premium x64). The keyboard is correctly identified on the USB, M-audio's drivers installed and this shows up in any MIDI software I start, but nothing can be transmitted from the keyboard to the computer.The usb keyboard works with other computers, and the Dell Studio sound system can play MIDI files. To make sure I alternated to an external Creative XFi soundblaster audio unit, which should have all MIDI capabilities, but again no sound from the keyboard (actually, a field in the recording software would show up if MIDI instructions were received).
View 5 Replies
View Related
Oct 13, 2009
I am considering getting rid of my CME-UF5 Midi keyboard since there is no possibility of running it under Windows 7 and purchasing something new. Although I did like the quality and weight of the keys with CME vs M-Audio, I suspect M-Audio would have much better driver support and customer support for future updates, CME was certainly lacking in this department considering they didn't even provide a Vista driver for this damn thing. I browsed through forums and it seems that someone had created their own Vista driver for it by modyfing the XP one while others claimed that due to the hardware inside this keyboard, there would be no way to run it outside of an 32bit XP environment.
View 9 Replies
View Related
Oct 4, 2012
I got a axiom 49 keyboard im trying to hook up to my pc.
View 1 Replies
View Related
Apr 16, 2010
I am looking for a program that converts mp3 to midi for win 7. not midi to mp3 it has to be mp3 to midi
View 7 Replies
View Related
Dec 24, 2011
I want to hook up a MIDI keyboard to my computer so I can take computer-based playing lessons.
I'm running Windows 7 Home Premium, 64-bit. I have a generic MIDI-USB cable. I plug it in, Windows recognizes it, and installs a driver. I plug the MIDI In cable into the Out socket of a Yamaha PSR260 keyboard, and Out into In, and power on the keyboard. On the MIDI-USB cable, the red power light is on, and the In LED is flashing. So far, so good, but now I'm having troubles.
I think that I need to install a Yamaha MIDI driver in order for Windows to recognize my device. I downloaded the UM312x64 package, but when I run setup.exe, it gives me "Error 25001. No device is connected."
View 2 Replies
View Related
Dec 19, 2011
I'm hoping some one can help make the driver work for Windows 7 for my Casio CTK 810.
View 3 Replies
View Related
Oct 2, 2011
I run my Dell XPS 17 in live performance using multiple midi devices. I had a problem of the midi ports available being filled do to doubled up instances and had to go into the registry to clean out the copied instances.I have done that before; but, this time I accidentally deleted the primary midi driver (midi REG_SZ wdmaud.drv)Where can I find this driver to replace the one deleted?
View 2 Replies
View Related
Dec 13, 2011
I created some Christmas cards with music thru embedded midi files and could view and hear everything until today. Now when I try to viiew one of them, or go to any site that uses WMP for midis, I get an error message that IE has stopped working and will notify me of a solution. If I remove the midi file from the page, then the page functions properly. I went to my "Manage Add-Ons" and WMP is enabled. What else can I do?
View 2 Replies
View Related
Apr 6, 2012
Need 64bit Windows 7 MIDI Gameport driver for C Media8738
View 1 Replies
View Related
Nov 24, 2011
I can't get use of my OS anymore, it boots up in repair mode then says it cant automaticly fix these errors. So I can't get into the system to get my files, and when I attach the Hard drive as a Slave, it looks as if all my files have dissappeared! This is the error details, there was (2) errors: [code]
View 3 Replies
View Related
Nov 7, 2012
i can't seem to run any of my browsers anymore, i do care about chrome the most and this is what it says when i try running it:"Google Chrome has stopped working". [code]
View 9 Replies
View Related
Dec 27, 2011
I have a serious problem with a recovery which did not solve the problem. I now have no internet the screen is wrong the icons and programs have disappeared and I just cannot use the computer anymore. can someone let me know if I can recover the system by running the program in safe mode or how can I recover the system to to yesterday's setting.
View 9 Replies
View Related
Dec 10, 2011
Seems my windows will not backup anymore, it did not finish last backup. I tried to start a new one and just keeps giving the same error, last backup did not finish. I am backing up on a spare external usb drive.find the drive no problem. Give me something called error on the windows bit logger??
View 2 Replies
View Related
Sep 14, 2012
[code] My media player won't play movies anymore, I can download off the net and i get the message that my media player has stop working. Why is this?
View 1 Replies
View Related
Mar 19, 2011
I have an ASUS N61Jv, running Windows 7 Professional 64bit (legal, pre-installed). The built in webcam is suddenly not functioning anymore. I can't recall changing anything, so I'm not sure why this is happening. When opening the cam in skype, windows live messenger, or lifeframe3, it keeps saying that the cam is in use by another application. I've reinstalled the driver, but to no avail. I have also reinstalled the software programs.
Here's some information:
USB2.0 UVC 2M WebCam
USBVID_13D3&PID_5122&REV_0202&MI_00
View 14 Replies
View Related
Dec 3, 2011
Some minutes ago I was moving an image file into a folder on my desktop using my mouse but after that I suddenly haven't been able to open none of my folders anymore!When I click twice on a folder it goes in "Windows Explorer Taskbar". I can see it there but if I try to open it , it "flies away" towards rightside on my desktop and disappear ( I guess that's the same movement I did moving the image into the folder ).
View 4 Replies
View Related
Feb 2, 2013
I cannot make a back-up anymore. The only way to sent my files to an external hard drive is via Windows Easy Transfer.It says that it is missing important parts on the system.All browers will stop working after about 10 seconds. I can kill the process whenever I want and restart the brower, but the issue persists. Counts for all browers.If I startp my computer it will load the BIOS as it should be. Then it goes to load Windows. Also no problems, but right after loading Windows, it is going somethimes in Startup Repair. So I go to Safety Modus with network capabilities and I re-install the drivers for NVIDIA (GTX650). After restarting the system, it will load without any problems for a several of days.When I am on my Desktop, the antivirus will be disabled automatically. I did not touch anything(Norton 360, 2013 By Symantec).I had plans to do a re-install of Windows, but is someone else has a better idea, I would be glad to hear that.
View 8 Replies
View Related
