When I click on turn window features on or off, a new window opens. It says "Please Wait". Then nothing comes finally. I am left with a blank white window. I cannot turn any features on or off. I ran the command Sfc /scannow in cmd with administrative privilage.
View 2 RepliesHow to Turn Windows 7 Features On or Off ?
View 0 Replies View Relatedthe list is just empty after loading. I've tried running sfc /scannow, system restoring back, I've ran a chkdsk on C:, I created a new admin account to see if it worked, I even tried this command: reg delete HKLMCOMPONENTS /v StoreDirty but still no luck.
View 8 Replies View RelatedI am trying to install NET Framework 2.0 SP1 on Windows 7. This is a brand new install, the only apps I have installed are Office 2007 PRO, and Adobe Reader 9.0. I get the following error:
You must use "Turn Windows features on or off" in the Control Panel to install or configure Microsoft.NET Framework 2.0 SP1.
I am running Windows 7 Home Premium (SP1) on a fairly new machine.I ran malware and McAfee scans which were all clean. I also ran Aaron Stebner's .NET Framework setup verification tool (which was clean as well).I have been using a software program that uses "Microsoft .net 3.5".We have been having some issues with the program and were advised to turn on the following Windows features:Control Panel> Programs> Windows Features>Microsoft .Net 3.5>two checkmarks below thisI have repeatedly checked these, tow at a time, one at a time, etc and the system will give me a "wait message", state that all of the features could not be started and request a re-boot. Upon a re-boot, neither of these features are checked.I have also attempted to re-install 3.5 (and the program itself). We have been unable to re-install 3.5 (it appears to start but just disappears without any confirmation whatsoever).When I look in programs I have Microsoft.Net 4.0, which apparently is the "parent" of 3.5I have also entirely removed both McAfee & Malwarebytes thinking these may have been blocking us, all to no availby the way, system restore is also failing!
View 3 Replies View Relatedevery time I open "turn windows features on or off" the box stays blank no matter how long I wait. I have tried several things and have searched for quite a long time for solutions, but to no avail. The things i've tried include; everything in the following - FIX Blank or Empty List in Vista Turn Windows Features On or Off (OptionalFeatures.exe), sfc /scannow, reg delete HKLMCOMPONENTS /v StoreDirty, and making sure Windows Modules Installer is running and set to manual.
View 2 Replies View RelatedI have 64x and Yesterday i uninstalled my Net 3.5 sp1 because of a problem with my game and after that i can't install it again and set up is interrupted.I attached error log.And also here is the picture of my "Turn windows features on or off".
View 1 Replies View Relatedwhen going to programs and features i find that my programs do not populate. is there another way to uninstall programs besides in programs and features? also, is there a setting in the program that I need to correct?
View 1 Replies View RelatedMy "turn windows features on and off" box is blank. this is a known error with many 'solutions' that have not worked in my case. I've reinstalled Windows 7 prof. x64 twice (for a total of 3 installs). somewhere along the line of installing my standard programs 9all of which work, no issues, ect.) my "turn windows features on and off" box will go blank. I tried figuring out what program triggered this behavior by reinstalling and restarting after every program installed and checking the box. it was a different program that triggered the event from reinstall 1 to reinstall 2. so, that's telling me it's not a specific program that's triggering it. anyway, I don't have 2 hours to reinstall windows and my programs every night, so I'd like to know if there is a workaround (ie registry entries) that I can edit to enable features and programs. from my understanding of how "turn windows features on and off" works, it must only be changing a registry entry or editing a config file that tells the OS not to load those features, as in the documentation, it states that the programs and features are not uninstalled, they're just disabled.
View 8 Replies View RelatedHow to Create a Windows 7 Windows Features Shortcut ?
View 0 Replies View RelatedI installed win 7 pro on my laptop, it's not the original computer the cd key is assigned to. everthings working, it even let me update it to sp1, but what happens after 30 days, it says some features will not be available? such as? will I be able to use at all?
View 2 Replies View RelatedAnybody knows about Modern/Metro/Windows-8-style UI theme pack for Win7 but without "the new features that's only for touch" like StartScreen, Charm bar, etc, etc.
View 3 Replies View RelatedWhen I install a 7 OS to Windows Virtual PC, integration features won't install.
View 1 Replies View RelatedI'm trying to use the Parental Control feature on one Windows 7 machine in my home. This machine is used by two of my younger sons. Is there any way that I could use the Parental Control feature on each separate account in a sense that whenever the user logs in, the time restriction starts? As oppose to the time restriction being set at specific hours. And is there also a way that whenever the user logs out, if he still has time left, it will pause the time restriction and resume when he logs back in?
View 4 Replies View Relatedall my directx features are not available,
View 1 Replies View RelatedJust learning the ropes on Windows7; used Vista for coupla years: TOOL BAR: What happened to Edit function of for that matter File? RIGHT CLICK: What happened to Copy to and Move to ? The point being, how do I move selected files to another location on my computer?
View 1 Replies View RelatedFormerly with XP, I could change mouse clicks from needing two to one within the
control panel. Now under 7, I can't find that option in the control panel. Anyplace else I could look for that, or is it even available within 7?
After XPMode working flawlessly, it is all of a sudden giving me errors. When I lanuch it, it takes a very long time, the green bar goes all the way till the end where it says "Starting the virtual machine", then it errors out stating, "Could not enable integration features". Nothing was changed. I cant use my XPMode applications either.
View 9 Replies View RelatedFirst I know this has been asked a many times but no solutions seems to work for me. I have a bunch of stuff going wrong and all seems to related to each other. I am running Windows 7 Home Premium 64 bit.That is how the problem progressed:1. I was trying to enable Telnet service and found out that 'Turn Windows Features on/off' in Control panel > Programs and Features is a blank list.I checked on internet and i found out that it means my windows update wont be working as well so i check it:2. Windows update gives the error 80070002 and it does not check for updates.. Again check net and it said to run sfc/scannow in command prompt (as administrator). I did it. and it gives error 'Windows Resource Protection can't execute the command'.
I have tried everything. I have tried: msconfig.exe to enable/disable services and restarting and rechecking. Uninstalling my Avast Antivirus. Running MS Fixit toolI have checked disk check in advanced startup options. Deleted C:WindowsSoftwareDistributionDownload' contents and recheck the Windows update facility. Nothing works. I dont have Windows CD coz my laptop came installed with windows.
One of the features I like about FF is that it gives you the option to remember user names and passwords. Not sure if the latest Chrome and IE do the same??
View 1 Replies View RelatedDoes the installation provide flexibility on what Pro / Ultimate features are installed (or should I say enabled) above and beyond what comes standard with Home Premium? Before posting, I did some searching, and found the following link which includes screen shots. Looks like the answer is "No", at least not that I could find. I just built a PC and mainly want my Windows 7 experience to be that of Home Premium, except for just a couple of extra features I wanted. That probably doessn't sound so smart, since I paid for ultimate, but I can explain (sort of). So how different are the menu selections etc between Ultimate and Home Premium.
View 9 Replies View RelatedI have to uninstall a program but i cannot open the control panel Program and features
When I open these will appear (Please see attached file).
I have a netbook running Windows 7 Starter, and then all of a sudden some features/devices were disabled, or I don't know...uninstalled?There's a distinct look for the Windows 7 taskbar, right? Well, when I turned the computer on, this was what the taskbar looked like:
taskbar.jpg 9.59K
2 downloads
It began looking like Windows XP or something. I tried checking the Color Management Settings but all it did was change the color, not the theme (you know, that circle start button)But the Start Menu was the same Windows 7 Menu, only that it had a different theme:
startMenu.jpg 35.95K
2 downloads
The windows looked like this instead of the smooth and semi-transparent window look in Win 7:
myComputer.jpg 72.78K
2 downloads
What surprised me was that the Audio was somehow disabled...or uninstalled...When I tried right clicking that audio icon in the taskbar, it asked me to install an audio device, since it was detecting some sort of problem in the audio:
detectingAudio.jpg 18.72K
1 downloads
detectedAudio.jpg 31.47K
1 downloads
I thought those were the only things that changed, so I went on with my work. But when I opened a spreadsheet in Windows Excel and tried to Print Preview, it gave me this:
printer1.jpg 17.56K
2 downloads
printer2.jpg 37.77K
3 downloads
I wish I could tell you more details about it, but I just can't describe what happened. I don't even know what happened...maybe I tweaked the computer settings by accident and then made the changes after it rebooted. And by the way, the network settings were also somewhat configured, says I'm not connected to anything (well in fact I have a fully functional broadband radio connected).
I was on the permissions for drive C, because I didn't want standard user changing setting on there and when I clicked OK windows came up with an error and then when I tried to go back on to the permission change window it said " access denied" and I Now can't Change it back, I Can't do anything with admin features and I can't system restore.
Computer info:
Acer Aspire 5536
Windows 7 Home Premium
fter completing a Toshibe laptop checkup, the Toshiba laptop program suggested I follow certain steps to help my laptop run faster. Among many other steps, they said to delete un-neccesary files in Programs and Feautures. I did, and I thought I didn't delete anything important, but now I can't connect to my wifi. I think it might be something I deleted. How do I re-install something from Programs and Features after it's been deleted?
View 2 Replies View RelatedI have a custom PC for the past year and my main Windows 7 boot drive was giving my some aggravating problems. Board is an EVGA P67 SLI with a Crucial C300 128GB SSD as the main boot drive in the SATA3 location. I've seen MANY cases where people were having some slowing speeds with the drive and I finally came along with that problem as well, and since I only use the drive to boot up I figured a reformat would be a nice way to simply start over.
Regardless, I have 2 other mechanical hard drives one in which stores everything from Steam Games to Ventrilo and other software. The other is simply used for personal things like Pictures, Music, and Videos. My "Programs Drive" is simply like the "Program Files" of your typical C: drive really. Everything I can put on that one goes on that one and basically I use the SSD for the start up times since P67 doesn't support caching like the Z68s do.
My issue is, now that I've reformatted my main SSD drive when it comes to playing my games I'm only able to play whatever is through Steam. If it isn't through Steam then it simply doesn't run. Even when I actually try re-installing it again just for registry purposes it doesn't go through. Obviously my "Programs & Features" selection is a bit empty right now because nothing is registered on my main drive. Should probably look into doing that at some point as well with Steam and all of the installed games.
Can I redirect the Link in Control Panel that uninstalls a program to iobitunistaller?
View 1 Replies View RelatedI want to remove my program from Programs and Features list in windows 7 but not from hard disk.... only entry I want to remove
View 1 Replies View RelatedWhen I try to use the "Turn Windows features on or off" function to add or remove anything I get "An error has occurred. Not all of the features were successfully changed." I need to remove Microsoft .net framework 3.5.1
View 9 Replies View RelatedHow to uninstall program not in programs and features list
View 1 Replies View RelatedI have previously installed Window security essential.I realized today that my scheduled scan was not running.I tried opening the program but an alert with error code 0x8007064e appeared.I tried deleting the program but 'Microsoft window essential' was not on the list of 'programs and features'.I tried installing but error appeared telling me that my computer already has the program.I am using 64bit operating system?
View 1 Replies View Related