I have a Windows 7 (Starter) netbook and a Windows XP (Home Premium) desktop. The desktop does not have any wifi devices, and I don't want to get any. My netbook does, however. Would there be any way to connect the 2 with an ethernet cable so my desktop would get Internet through my netbook?
View 9 RepliesI would just like to say, I am not just posting this question anyhow. I have read around and I haven't found any solution to my problem, thus I have resorted in opening a new thread.So here is the prob:I have a Windows 7 Starter Edition netbook which is connected to a WRT54GL Wireless-G Router. This router is connected via hard wire to my Windows Vista Desktop and that is how the desktop has access to the internet. The netbook is accessing the internet the very same Router via Wi-Fi. The Printer (HP DeskJet 940c) is connected and installed on the Windows Vista Desktop and is functioning. It prints when I give it commands from the desktop. I have set the printer sharing options 'on' in the Networks and Sharing Center as well as haven't kept a sharing password (its open and unprotected). This is as far as I have gotten. My next challenge is, how can I print from the Windows 7 Starter Edition netbook on my HP Deskjet 940c via the Router.I would be very grateful if someone can explain to me in a very noob-ish way as I am not a techie. If someone could send me a video link or so.
View 1 Replies View Related1) I want to move Win 7 Home Premium from my desktop to my netbook.
2) I want to put Win 7 Professional on my desktop, hopefully without having to start from scratch.
I know if I buy Win 7 Pro, I can do an in-place upgrade on my desktop, but then my CD key for Home Premium may not work when I go to put it on my netbook? What do you think?
In Vista, I was able to use my at&t sim card in an LG cell phone, bluetooth connect my laptop to the internet. I now have Windows 7 /64bit and cannot connect.The Bluetooth pairing is fine, but i cannot get to the data connect.I never did and don't want to use the DUN connect.I also have a friend that does connect with windows 7, but he has 32bit?
View 1 Replies View RelatedI am looking to connect to a wireless network that does not have an internet connection and at the same time tether to my iPhone so I can connect to the internet.My iPhone tethers through Bluetooth without any issue and I have a connection to the internet.As soon as I join a wireless network, Windows drops the internet connection to my iPhone. The iPhone and Windows are still connected to each other through Bluetooth, but under the task bar icon it says "No Internet Access" below the Network name.The task bar icon also changes from the ethernet Icon to the wifi strength icon.It seems like the wifi connection is overriding the bluetooth connection. Is there a way to maintain the IP address and Bluetooth internet connection and at the same time connect to the wifi network and access the devices I need on the wifi network?
View 5 Replies View Relatedi seem to have a prob bu:t in sure 1 of u have a answer.i have a cell zte n762. With internet.i connlect and can create hot spot.i get the net via wifi on my pc and LG cell.however my laptop ((up g4 windows 7 conecTed but can't open any web pages.but laptop works perfectly on wifi at coffee shop.
View 3 Replies View Relatedi have a netbook with win 7 starter edition. i connected via usb to my android 2.2 phone. when i switched on usb tether on the phone, the netbook connected but didnt allow internet access. i'm quite sure this is a win7 setting issue, not android coz i have tethered the same phone to another xp laptop with no problems.
View 7 Replies View RelatedDoes anybody knows if there is a device driver for the iPhone's bluetooth network so I can tether via Bluetooth?
The driver needed is for: BTHENUM{00000000-deca-fade-deca-deafdecacafe}_VID&000205ac_PID&1292 That is Wireless iAP.
I just got myself a netbook for when i am out of the office. I intend to use it for a bit of web browsing, office 2010, corel draw and a bit of gmail.
I have both windows 7 32 bit and 64 bit. which one should i install on my netbook? some people say that 64-bit will draw more power, some say 64bit its more efficient bla bla bla, i think half the time nobody has actually tried and tested it.
i was wondering if any had the experience of upgrading to win 7 on an eee PC 1005HA. I'm about to bump the RAM to 2Gig, but I was wondering if there was a performance improvement by going to win 7 also.
View 1 Replies View RelatedI'm not sure this is the right forum for this question, but then again: lots of people seem to have comparable problems, so here goes:As my 3-year old netbook was getting very slow, I decided to get rid of all the junk at once by completely reinstalling the OS (Win7 starter). Now, there is a very easy way to this with the Recovery Manager (as described in the support papers on the HP site), but that didn't work for me. This may wll be due to a faulty HD; I've no way of testing it as my C: drive is now reformatted. So what next?I was not completely unprepared; earlier I made:- a USB-stick with the 'HP USB Recovery Flash Disk Utility' (HP45774). The stick does contain, I think, all or almost all of the contents of the recovery partition. (NB: you need a 16Gb stick and this is a trick you can do only once.
- a recovery CD on an external CD drive, although without a 'disk-image' as by then the system had grown much too bloated already. (should have done that straight away after I'd bought it, although I'm a bit at a loss as to what storage medium would be used).These two means should surely be enough to restore the thing to factory settings? However:- The memory stick should be bootable, but isn't.- Booting from CD works, but the Recovery Manager can't seem to access the diskimage on the usb-stick. (Although, when I call up a command prompt, one of the other options, it is readily available.)So I don't really know what to do now. I'm thinking of two options:1. In one forum thread it was said that the stick thus made 'often' or even 'usually' isn't bootable, as it should be. The advice was to make it bootable, using EasyBCD. That's easier said then done, I found; no luck so far.
The stick does contain a boot directory, bootmgr etc.; it clearly is supposed to be bootable.)2. Following the advice in other threads, I downloaded the whole 1.7Gb WAIK, just to get hold of imagex.exe, which i then put on the memory stick. As the bootable 'recovery CD' does provide a command prompt, I could, supposedly, 'apply' the image base.wim, which is also on the stick, to 'drive D:' (under these circumstances, that's the main partition). But as there's lots of other stuff on the stick (like FactoryUpdates), I'm afraid it will be a lot of hassle installing computer-specific drivers and stuff.
I'm having problems with my Toshiba Netbook with Windows 7 pre installed in it. I was surfing the net and all of a sudden, Antimalware Doctor popped up. I tried to close it and it went away for a while, but then it had restarted my computer by force and now it won't even boot up.
View 2 Replies View RelatedI have a netbook that has windows xp sp2 on it and I want to upgrade it to windows 7 through a flashdrive. I looked up tutorials online, however everything is for vista.The tutorials told me to diskpart select my usb which isnt possible through xp. IS there anyway else to do it? BTW my computer is in chinese (language I cant read) so
View 4 Replies View RelatedI just got a netbook and it came with Windows 7 Starter, and a whole lot of preloaded crap. Apparently it also doesn't come with a boot disc, that the 'factory settings' are hidden deep within the system somewhere. Well, I don't seem to like the factory settings, and I want to install Windows 7 full version, clean, with no preloaded crap, but I don't know the best way to go about it, since this netbook doesnt have a disc drive. Also, I'll be departitioning and formatting and installing blank, but if something goes amiss, I don't have a disk to reinstall the starter edition? I've heard I can turn a USB into a boot drive to install an OS off of, but can I download a backup copy of Starter Edition to put back on the computer in case anything goes wrong?
View 11 Replies View RelatedMy netbook crashed luckly I have an external cd rom drive, and the recovery discs. How do I get the netbook working again though. What are the steps I need to take.
View 1 Replies View RelatedI have a acer netbook. It won't load windows 7 I just get a message on the bottom of the screen press <F2> go to setup. Without pressing any buttons I get a new screen that says....Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v1.0.0.13(2008/10/15)Check cable connection..!PXE-MOF: Exiting Intel PXE ROM.No bootable device -- insert boot disk and press any keyIt's a net book it doesn't have a place for a disk?? When I push any buttons I get a loud alarm
View 14 Replies View RelatedMy friends netbook crashed and I am helping her install windows 7 64bit. The install starts off fine; but at about the 50% mark I get a BSOD
KERNEL_DATA_INPAGE_ERROR Stop
0x0000007A
ataport.sys
At my first installation of Windows 7 to my netbook there were 2 language options: Turkish & English Today I decided to reinstall Windows 7 from, umm what you call, the partition where is located Windows 7 setup files, the hidden part of the HDD. I pressed F11, it didn't worked. Googled it and I'm right, it is F11 for Casper's netbooks.
Then I tried F8, then reinstall Windows 7 (which does not exists on my desktop PC interestingly), and I installed it without problem. Even it backuped the old files. And didn't touched some folders under C. But it is not clean installation as you can see it backuped the old files, didn't touched some folders under C, and the most inportant part is that now it is Turkish! Where is my English Windows 7?
I want to ask how can I start this Windows setup which is hidden at the HDD? Is there something like Linux distro and app to start it. I have USB sockets but not CD/DVD/etc... hardware.
I have a Asus Eee PC 1215N.I wanted a "clean" PC so I decided to format and reinstall Windows.
1)I have boot the "bootable Partition Manager" from a usb DVD device;
2)I have delete the 4 default partitions, then I have create 2 partition with NTFS file system;
3)I have download a Windows 7 Home Premium x64 ISO, then I write it on usb pen drive by Microsoft tool;
4)I have boot this usb pen drive; after some time, the PC show me a window for language select; I selected it;
5)Then it show me a windows with "Install now" button: I clicked it;
6)Then it show me this message: "Load Driver - A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now. Note: If the Windows Installation media is in the Cd/DVD drive, you can safely remove it for this step".
I've bought an Acer Aspire One and it has Meego on it, so I want to install Win 7. Considering it hasn't got CD/DVD, I copied the Windows 7 installation files on a USB flash, set up BIOS to boot from USB, but when it tries to boot it from USB it says "invalid or damaged Bootable partition". I haven't got the slightest idea. Tried to Google it out but didn't manage to find the answer. I suppose all I have to do is make a good bootable USB, but how?
View 7 Replies View RelatedI was wondering if internet connection sharing was made impossible by Microsoft on netbooks even after an Anytime Upgrade to Windows 7 Home Premium. This is because whenever I create an Ad-Hoc network on my netbook I am unable to turn on Internet Connection Sharing. Though my friend with a Toshiba notebook running Home Premium is able to turn on Internet Connection Sharing
View 4 Replies View RelatedI have a toshiba nb305 netbook without a cd/dvd drive. my backup was interuped. I was trying to clone my drive. when I tried to recover it I get the "no bootldr" error. I have tried to set the boot to an external cd/dvd but it does not recognize the cd/dvd. I only get the "no bootldr" everytime. How can I recover the C drive so I can reload my win 7. Im considering removing the HD and using it as a second drive in another computer and trying to format it. I would prefer not to open the case. is there any other solution? I havent tried to install an OS on a thumb drive and try to boot that way, will that work?
View 6 Replies View RelatedHow do you reinstal Win 7 on a Gateway Netbook
View 2 Replies View RelatedI have a asus 1201n eee pc it was working with no problems fast stable nothing wrong one day 3 weeks ago windows updates came out downloaded and installed ever since then a adapter plugged in says charging but isn't. Already replaced battery and charger. Us ut windows? Or the computer?
View 5 Replies View RelatedI thought my Netbook deserved a fresh install and so I started formatting my HD's with GParted. NTFS all in one HD of course. Well I fixed my bootable ISO with the original Windows MSDN on my USB stick and it all worked perfect. UNTIL I had to restart my computer.
First I got this error: "Windows Setup could not configure Windows to run on this computer's hardware." Then, when I restart my Netbook again, it gives me this error: "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I've tried a lot, messed around in my BIOS, tried reinstalls of multiple versions of Windows: Windows 7 Ultimate x86, Windows 7 Ultimate x64, Windows 7 Starter (32bit only), Windows 7 Enterprise and much more. It simply all gives me the same ****ing error I really don't like it.
I use a HP dv7-1247 x64 and just bought a Acer Netbook 722-BZ197 x64 and both use W7 SP1 Home Premium. I would like to transfer all my files from the HP to the Acer so what is the best possible method to acccomplish this type of operation. I travel quite a bit and I would like to use the netbook instead of the larger laptop.
View 1 Replies View RelatedI've heard that diskpart / clean all is very thorough, but I don't know how to do this on my netbook since the main drive of the computer in use can't be the one selected for clean all. Is there another way to do this, or an alternative that would be just as thorough? I have Windows 7 starter (32 bit).
View 2 Replies View RelatedI am considering getting a netbook through an online company and with it would have installed 2gb memory, 500gb hdd and Win 7 32 bit Home Premium. For various reasons (accessing older hardware on the go etc...) I want to be able to dual boot from XP Pro (I have like 3 unused retail licenses) and the 7 home premium 32 bit that I might also upgrade later. Netbook doesn't come with media. Is there a way to do this? I have an upgrade disc that came with my desktop PC but, it is 64 bit.
View 1 Replies View RelatedI been working a a friends netbook for about 2 weeks now and I can't seem to find a fix to the problem. Once I got Windows 7 on it but when my friend started putting music on it it crashed. So then after that I installed Ubuntu on it and that worked for a little bit but it still crashed. Then I installed Windows 8 on it and it worked for fine for a few days then it quit working. So I decided to install Windows 7 back on it and after it dose a complete install where the screen should install the drivers I got a short blue screen then the netbook restarted. So now when you boot it up it try's to load windows but after it bets passed loading it restarts the computer. The netbook is a Asus Eee PC 1001p.
View 4 Replies View RelatedI'm trying to diagnose this problem from 3000 miles away over the phone. I am *very* versed in WinXP, but not at all in Windows 7. As such, I am not looking for a perfect solution at this time, but merely some hints to maybe point me in the right direction, or what the next logical steps in diagnosing this might be.Brand new Acer D55 with Windows 7 home, bought and configured around Christmas 2010. It was working fine until the middle of April, when suddenly (during usage, i.e., not overnight or after a reset), the Acer dropped off the wireless network while other computers remained on the same wireless network, and continue to remain even now. This is the only Windows 7 computer on that network. All others are XP. Here is where I came in.
I have been troubleshooting remote wireless woes for almost 10 years, and am quite good at it. My first instinct is to have someone plug the computer into the router directly with an Ethernet cable, thus temporarily getting the computer back online long enough for me to VNC in and find out why the computer's wireless connection died. This has ALWAYS worked. I have never seen a computer, that when plugged physically into a functioning router, didn't come online. So as you can probably guess, the computer didn't come online.The computer has McAfee security installed, and I have seen AV/firewall suites cause problems in computer usage before, but I have never seen one prevent a computer from jumping online.
The biggest concern at this point for me is why the Local Area Connection is failing. But regarding both Local and Wireless connections, here is what I have tried: Physically plugging the computer into the router.- System restoring to 4/16/11, and then again to 3/24/11- Deleting the stored Wireless connection on record, and adding it back- ipconfig /release, /renew, various netsh commandsNot knowing anything about Windows 7, and knowing that I am troubleshooting this remotely
I recently purchased an Asus Eee PC and its a great little machine...however it has a lot of bloat-ware on it and according to several system monitors i use the cpu and the ram are both nearing 95-100% at odd times. Now i dont want to restore the netbook to the Asus factory settings which will just add the unnecessary stuff again...but is there a way to reset the windows 7 started edition to just what windows includes? no asus extras that im never going to use?
View 1 Replies View Related