I'm having problems with my Toshiba Netbook with Windows 7 pre installed in it. I was surfing the net and all of a sudden, Antimalware Doctor popped up. I tried to close it and it went away for a while, but then it had restarted my computer by force and now it won't even boot up.
I am considering getting a netbook through an online company and with it would have installed 2gb memory, 500gb hdd and Win 7 32 bit Home Premium. For various reasons (accessing older hardware on the go etc...) I want to be able to dual boot from XP Pro (I have like 3 unused retail licenses) and the 7 home premium 32 bit that I might also upgrade later. Netbook doesn't come with media. Is there a way to do this? I have an upgrade disc that came with my desktop PC but, it is 64 bit.
I've an hp mini 110 with windows seven starter and I want to make a dual boot 7/XP...I downloaded the 32bit version of the sp3 XP and following this guide: Dual Boot Installation with Windows 7 and XP I installed on a new partition...(I didn't put the sata drivers cause when I started the usb on the boot xp started to install without problem)..after xp finished I booted but I get this error "windows could not start because of a computer disk hardware configuration problem.."...when I only can see XP and It can't be opened...I tryed with the 7-system-recovery on the usb to make recovery and put these strings on prompt
but nothing,same error!!!I thought it was a sata driver issue so I downloaded the drivers and opened on the system recovery through usb but it says they can't be installed....so should I slipstream in the xp iso before install xp??
a day ago, while using my netbook (asus eee 1001p) to look at videos on Internet, the shockwave flash plugin became unresponsive. shortly after this, my pc froze.
I go to start my netbook and it doesn't boot into windows but it goes straight into startup repair. I can't press F8 or anything, it is really annoying.
My little netbook has started to stall for several minutes on boot. It seems to be related to the network setting or adaptor. I am not really sure how to log this, or diagnose. Nothing shows up in the basic troubleshooting etc. Do not know what info is needed. It works fine in safe mode btw.
Not sure if this is where I should post this or not. A friend brought me their Acer Aspire one, I have tried to get it to boot, but it takes forever, then it gives a hi-low-hi-low beep that sounds like the European sirens. I put Windows 7 on a usb drive and set it to boot from the usb, but it still won't boot. It once came up with a option to repair the Windows 7, but it sat there for 10 minutes doing nothing, then started with the beeps again.
My netbook froze on friday night. Try to restart, but was stuck at grey screen. It has asus logo and eee pc written. The options f2 to run setup and tab to display bios post yields nothing. In other words, pressing either button doesn't work. I have removed the battery, pressed the power button without the power cord, put everything back in, tapping f2. So far, no progress. Few times, i try pressing f2 similtaneously as i hit the power button, i got american megatrends screens. Still, none go further. I have this netbook for a little over a year. The warranty just expired a month ago. It is running window 7 starter already installed when i got it at bestbuy. I had contacted asus support, and tried some i mentioned above. I prefer to do this by myself.
I just got myself a netbook for when i am out of the office. I intend to use it for a bit of web browsing, office 2010, corel draw and a bit of gmail.
I have both windows 7 32 bit and 64 bit. which one should i install on my netbook? some people say that 64-bit will draw more power, some say 64bit its more efficient bla bla bla, i think half the time nobody has actually tried and tested it.
i was wondering if any had the experience of upgrading to win 7 on an eee PC 1005HA. I'm about to bump the RAM to 2Gig, but I was wondering if there was a performance improvement by going to win 7 also.
I'm not sure this is the right forum for this question, but then again: lots of people seem to have comparable problems, so here goes:As my 3-year old netbook was getting very slow, I decided to get rid of all the junk at once by completely reinstalling the OS (Win7 starter). Now, there is a very easy way to this with the Recovery Manager (as described in the support papers on the HP site), but that didn't work for me. This may wll be due to a faulty HD; I've no way of testing it as my C: drive is now reformatted. So what next?I was not completely unprepared; earlier I made:- a USB-stick with the 'HP USB Recovery Flash Disk Utility' (HP45774). The stick does contain, I think, all or almost all of the contents of the recovery partition. (NB: you need a 16Gb stick and this is a trick you can do only once.
- a recovery CD on an external CD drive, although without a 'disk-image' as by then the system had grown much too bloated already. (should have done that straight away after I'd bought it, although I'm a bit at a loss as to what storage medium would be used).These two means should surely be enough to restore the thing to factory settings? However:- The memory stick should be bootable, but isn't.- Booting from CD works, but the Recovery Manager can't seem to access the diskimage on the usb-stick. (Although, when I call up a command prompt, one of the other options, it is readily available.)So I don't really know what to do now. I'm thinking of two options:1. In one forum thread it was said that the stick thus made 'often' or even 'usually' isn't bootable, as it should be. The advice was to make it bootable, using EasyBCD. That's easier said then done, I found; no luck so far.
The stick does contain a boot directory, bootmgr etc.; it clearly is supposed to be bootable.)2. Following the advice in other threads, I downloaded the whole 1.7Gb WAIK, just to get hold of imagex.exe, which i then put on the memory stick. As the bootable 'recovery CD' does provide a command prompt, I could, supposedly, 'apply' the image base.wim, which is also on the stick, to 'drive D:' (under these circumstances, that's the main partition). But as there's lots of other stuff on the stick (like FactoryUpdates), I'm afraid it will be a lot of hassle installing computer-specific drivers and stuff.
I have a netbook that has windows xp sp2 on it and I want to upgrade it to windows 7 through a flashdrive. I looked up tutorials online, however everything is for vista.The tutorials told me to diskpart select my usb which isnt possible through xp. IS there anyway else to do it? BTW my computer is in chinese (language I cant read) so
I just got a netbook and it came with Windows 7 Starter, and a whole lot of preloaded crap. Apparently it also doesn't come with a boot disc, that the 'factory settings' are hidden deep within the system somewhere. Well, I don't seem to like the factory settings, and I want to install Windows 7 full version, clean, with no preloaded crap, but I don't know the best way to go about it, since this netbook doesnt have a disc drive. Also, I'll be departitioning and formatting and installing blank, but if something goes amiss, I don't have a disk to reinstall the starter edition? I've heard I can turn a USB into a boot drive to install an OS off of, but can I download a backup copy of Starter Edition to put back on the computer in case anything goes wrong?
My netbook crashed luckly I have an external cd rom drive, and the recovery discs. How do I get the netbook working again though. What are the steps I need to take.
I have a acer netbook. It won't load windows 7 I just get a message on the bottom of the screen press <F2> go to setup. Without pressing any buttons I get a new screen that says....Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v1.0.0.13(2008/10/15)Check cable connection..!PXE-MOF: Exiting Intel PXE ROM.No bootable device -- insert boot disk and press any keyIt's a net book it doesn't have a place for a disk?? When I push any buttons I get a loud alarm
At my first installation of Windows 7 to my netbook there were 2 language options: Turkish & English Today I decided to reinstall Windows 7 from, umm what you call, the partition where is located Windows 7 setup files, the hidden part of the HDD. I pressed F11, it didn't worked. Googled it and I'm right, it is F11 for Casper's netbooks.
Then I tried F8, then reinstall Windows 7 (which does not exists on my desktop PC interestingly), and I installed it without problem. Even it backuped the old files. And didn't touched some folders under C. But it is not clean installation as you can see it backuped the old files, didn't touched some folders under C, and the most inportant part is that now it is Turkish! Where is my English Windows 7?
I want to ask how can I start this Windows setup which is hidden at the HDD? Is there something like Linux distro and app to start it. I have USB sockets but not CD/DVD/etc... hardware.
I have a Asus Eee PC 1215N.I wanted a "clean" PC so I decided to format and reinstall Windows.
1)I have boot the "bootable Partition Manager" from a usb DVD device;
2)I have delete the 4 default partitions, then I have create 2 partition with NTFS file system;
3)I have download a Windows 7 Home Premium x64 ISO, then I write it on usb pen drive by Microsoft tool;
4)I have boot this usb pen drive; after some time, the PC show me a window for language select; I selected it;
5)Then it show me a windows with "Install now" button: I clicked it;
6)Then it show me this message: "Load Driver - A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now. Note: If the Windows Installation media is in the Cd/DVD drive, you can safely remove it for this step".
I've bought an Acer Aspire One and it has Meego on it, so I want to install Win 7. Considering it hasn't got CD/DVD, I copied the Windows 7 installation files on a USB flash, set up BIOS to boot from USB, but when it tries to boot it from USB it says "invalid or damaged Bootable partition". I haven't got the slightest idea. Tried to Google it out but didn't manage to find the answer. I suppose all I have to do is make a good bootable USB, but how?
I have a Windows 7 (Starter) netbook and a Windows XP (Home Premium) desktop. The desktop does not have any wifi devices, and I don't want to get any. My netbook does, however. Would there be any way to connect the 2 with an ethernet cable so my desktop would get Internet through my netbook?
I was wondering if internet connection sharing was made impossible by Microsoft on netbooks even after an Anytime Upgrade to Windows 7 Home Premium. This is because whenever I create an Ad-Hoc network on my netbook I am unable to turn on Internet Connection Sharing. Though my friend with a Toshiba notebook running Home Premium is able to turn on Internet Connection Sharing
I have a toshiba nb305 netbook without a cd/dvd drive. my backup was interuped. I was trying to clone my drive. when I tried to recover it I get the "no bootldr" error. I have tried to set the boot to an external cd/dvd but it does not recognize the cd/dvd. I only get the "no bootldr" everytime. How can I recover the C drive so I can reload my win 7. Im considering removing the HD and using it as a second drive in another computer and trying to format it. I would prefer not to open the case. is there any other solution? I havent tried to install an OS on a thumb drive and try to boot that way, will that work?
I have a asus 1201n eee pc it was working with no problems fast stable nothing wrong one day 3 weeks ago windows updates came out downloaded and installed ever since then a adapter plugged in says charging but isn't. Already replaced battery and charger. Us ut windows? Or the computer?
I thought my Netbook deserved a fresh install and so I started formatting my HD's with GParted. NTFS all in one HD of course. Well I fixed my bootable ISO with the original Windows MSDN on my USB stick and it all worked perfect. UNTIL I had to restart my computer.
First I got this error: "Windows Setup could not configure Windows to run on this computer's hardware." Then, when I restart my Netbook again, it gives me this error: "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I've tried a lot, messed around in my BIOS, tried reinstalls of multiple versions of Windows: Windows 7 Ultimate x86, Windows 7 Ultimate x64, Windows 7 Starter (32bit only), Windows 7 Enterprise and much more. It simply all gives me the same ****ing error I really don't like it.
I use a HP dv7-1247 x64 and just bought a Acer Netbook 722-BZ197 x64 and both use W7 SP1 Home Premium. I would like to transfer all my files from the HP to the Acer so what is the best possible method to acccomplish this type of operation. I travel quite a bit and I would like to use the netbook instead of the larger laptop.
I've heard that diskpart / clean all is very thorough, but I don't know how to do this on my netbook since the main drive of the computer in use can't be the one selected for clean all. Is there another way to do this, or an alternative that would be just as thorough? I have Windows 7 starter (32 bit).
I been working a a friends netbook for about 2 weeks now and I can't seem to find a fix to the problem. Once I got Windows 7 on it but when my friend started putting music on it it crashed. So then after that I installed Ubuntu on it and that worked for a little bit but it still crashed. Then I installed Windows 8 on it and it worked for fine for a few days then it quit working. So I decided to install Windows 7 back on it and after it dose a complete install where the screen should install the drivers I got a short blue screen then the netbook restarted. So now when you boot it up it try's to load windows but after it bets passed loading it restarts the computer. The netbook is a Asus Eee PC 1001p.
I'm trying to diagnose this problem from 3000 miles away over the phone. I am *very* versed in WinXP, but not at all in Windows 7. As such, I am not looking for a perfect solution at this time, but merely some hints to maybe point me in the right direction, or what the next logical steps in diagnosing this might be.Brand new Acer D55 with Windows 7 home, bought and configured around Christmas 2010. It was working fine until the middle of April, when suddenly (during usage, i.e., not overnight or after a reset), the Acer dropped off the wireless network while other computers remained on the same wireless network, and continue to remain even now. This is the only Windows 7 computer on that network. All others are XP. Here is where I came in.
I have been troubleshooting remote wireless woes for almost 10 years, and am quite good at it. My first instinct is to have someone plug the computer into the router directly with an Ethernet cable, thus temporarily getting the computer back online long enough for me to VNC in and find out why the computer's wireless connection died. This has ALWAYS worked. I have never seen a computer, that when plugged physically into a functioning router, didn't come online. So as you can probably guess, the computer didn't come online.The computer has McAfee security installed, and I have seen AV/firewall suites cause problems in computer usage before, but I have never seen one prevent a computer from jumping online.
The biggest concern at this point for me is why the Local Area Connection is failing. But regarding both Local and Wireless connections, here is what I have tried: Physically plugging the computer into the router.- System restoring to 4/16/11, and then again to 3/24/11- Deleting the stored Wireless connection on record, and adding it back- ipconfig /release, /renew, various netsh commandsNot knowing anything about Windows 7, and knowing that I am troubleshooting this remotely
I recently purchased an Asus Eee PC and its a great little machine...however it has a lot of bloat-ware on it and according to several system monitors i use the cpu and the ram are both nearing 95-100% at odd times. Now i dont want to restore the netbook to the Asus factory settings which will just add the unnecessary stuff again...but is there a way to reset the windows 7 started edition to just what windows includes? no asus extras that im never going to use?