My system crashes when in screensaver. i'm running Boinc during that time. It a self built system with a Board: MSI 990FXA-GD65 (MS-7640) 3.0 Bus Clock: 200 megahertz, BIOS: American Megatrends Inc. V19.6 12/16/2011 3.60 gigahertz AMD Phenom II X6 1090T, No memory cache 16372 Megabytes Installed Memory 2250.43 Gigabytes Usable Hard Drive Capacity 1810.99 Gigabytes Hard Drive Free Space I attach the SF diagnostic file.
View 6 RepliesI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
i m having this weird problem where, the moment i set my screen resolution to 1440*900 (or anything close to 8:5 ratio), my system crashes, the screen goes blank except 4 a thin white line in the corner and remains this way no matter how many times i reboot. my only option then is to start in safe mode and restore the system to an earlier restore point.
View 9 Replies View RelatedI am experiencing some disturbing shut downs on my pc. This has been plaguing me for about 6 months now and I can't take it anymore. Just to be clear, these crashes do not provide a BSOD and therefore no error code for me to research and correct on my own. In the last two days, this has happened 4-5 times, and most often while watching streaming video online (but not always). Without warning, everything will lock up (sometimes this is accompanied by a terrible sound emitted from the speakers - presumably looping audio from the video i was watching). The computer then reboots itself without my involvement.
View 31 Replies View RelatedJust to be clear, these crashes do not provide a BSOD and therefore no error code for me to research and correct on my own. In the last two days, this has happened 4-5 times, and most often while watching streaming video online (but not always). Without warning, everything will lock up (sometimes this is accompanied by a terrible sound emitted from the speakers - presumably looping audio from the video i was watching). The computer then reboots itself without my involvement. Before anyone asks, my drivers are UP TO DATE, and my BIOS is up to date as well. So far, I have asked around and most people point to my graphics card overheating, or a very dirty (dusty) pc as a likely cause. Firstly, my computer is generally kept very clean, and I am monitoring my GPU temps and they are usually WELL within normal ranges (frankly it runs very cool). I have called EVGA for support, and they told me they had not heard of this problem before. They had me run a bunch of gpu stress tests, all of which provided no clue (they were clean) as to what could be wrong. Someone else told me to make sure my RAM was properly seated. I did check that and I can't see any seating issues.
OS. Windows 7 HP 64Bit
CPU. Core i5 750 2.66
Motherboard. Gigabyte GA-H57M-USB3
Memory. Mushkin Enhanced Blackline Frostbyte 6GB 3X2GB PC3-12800 DDR
Graphics Card. NVIDIA GeForce GTX 460
Monitor. Displays Acer LCD 24" 2MS H243H BMID
PSU. Corsair TX750W 750W ATX 12V 60A 24PIN ATX Power Supply
Case. Antec Three Hundred Gaming Case ATX 3/0/(6) 2xUSB Audio
Cooling. Arctic Cooling Freezer 7 Pro REV.2 CPU Heatsink Cooler LGA13
Hard Drive. Western Digital Caviar Green (WD10EARS) 1000GB (1TB) SATA 3 Gb/s 64MB (OEM)
It is a win 7 machine attemping a system image backup. It is being backed up to a HORNETTEK JBOD 3.5 Enclosure with a 1TB western Digital drive in it. I can see and access the drive as normal.When i start the back up it starts just fine and crashes at the lsat possible second before completion.
View 9 Replies View RelatedI have a HP G series notebook and as of last Thursday I started getting insane amounts of slowdown. Even in the lock screen where I type my password in has lag. After a day of this I shut off my computer for several hours and performed a full virus scan with Malware Bytes and nothing was found. Soon after that my Laptop started to crash. I Re-booted several times and the problem persists. Ill log in (slowly) and access any program but within 5-10 minutes the PC will lock up. I truly have zero idea how this happened. I haven't installed, downloaded or added any sort of software program or files recently. I haven't dropped, wet or damage my laptop recently either. The last thing I did before all this happened was I synced my Xbox 360 to my Windows Media Center and Windows Media Player so I could listen to music while I play. After all the craziness started happening I deleted all my music from the media center and turned off the syncing function but the problems escalated from there.
View 3 Replies View RelatedSystem crashes when playing games, the problem just recently started.Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64
- the original installed OS on the system? yes
- an OEM or full retail version? full retail
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer
- What is the age of system (hardware)? 1 year
- What is the age of OS installation (have you re-installed the OS?) 1 year
I have Windows 7 64bit and I am trying to set the system up to not automatically restart if it crashes and when it crashes to write a mini dump file. However after I deselect restart automatically and select mini dump and click ok and exit, I see that all settings are reverted to default settings.
View 1 Replies View RelatedI recently reinstalled Windows 7 Home Premium 32 bit on my HP Pavilion dv6233se notebook pc as a response to frequent system crashing and being unable to restart. I've updated all the drivers as far as I can determine, but I still get occasional BSOD. The blue screen is too blurry for me to read so I have no information to go on as far as codes or causes.
The most recent BSOD occurred while running IOLO System Mechanics, when I started the defrag tool, but I have since run the tool without incident.
[code]...
I'm using a 2007 Toshiba Tecra M5 Laptop. I've run the SF Diag Tool, so here are the details.My laptop has thus far crashed 5 times today in a time span of 3 hours, what can I do to make this stop? Any ideas why this happens?
View 9 Replies View RelatedI have recently purchased a Sony VAIO with Windows 7 pre-installed. Completely randomly (this happens more often now - every 30 mins or so) the computer will freeze up, then brings me to a blue screen telling me that "A problem has been detected and your computer has been shut down to prevent damage". This stays on for only a second then the screen goes black. Five seconds later I get "Operating System Not Found". The only way I can use the computer again is to hold the power button down (which gives the computer a full power off), then turn it back on again.
View 9 Replies View RelatedMy computer has been crashing a lot lately. Usually, the computer freezes and weird lines appear on the display when it happens. Other times it just shows a BSOD and restarts. It started happening around 2-3 weeks after my motherboard, processor and RAM were changed because a part of the previous motherboard had burnt. The previous motherboard was ASUS M3A78-EM, the onboard graphics was ATI Radeon HD 3200 and RAM was 2 GB DDR2.I took the PC to a my computer vendor after everything I tried had failed. Firstly, he diagnosed it as an issue because of improper earthing/grounding in the switchboard where I plugged the computer and the UPS. I got the earthing issue sorted but to no avail, it still hanged/freezed. The second time I took it to him he said that he might have to update the BIOS and when I brought it back the problem had apparently been fixed but that was only for a few days. After like 4-5 days it started happening again. Same weird lines - green, magenta, purple and all the rest of it - started appearing. The HDD LED stops when this happens. I only observed the LED today, though. Today the computer freezed without those weird lines on two out of the 5 or 6 times it happenrd, it looked like it had just hanged but the HDD LED had gone off.Sometimes the PC doesn't start up at all immediately after it has crashed. That's what led me to guess it's a hardware issue. Also, it happens in safe mode and Windows XP too (I dual boot Windows XP and Windows 7) and I remember it once happening even before the computer had completely booted.Computer details:Windows 7 32-bitASUS M4A78LT-M-LEAMD Athlon II X2 250ATI Radeon 3000 onboard graphics1 x 2 GB DDR3 RAM250 GB SATAMinidumps and NirSoft BlueScreenView HTML report: url..
View 13 Replies View RelatedI recently ran a program called RegOwnit.exe on my windows registry to take ownership of the registry. But before I did that I made a backup copy of the registry by selecting Export and All from RegEdit.exe and saving a file called backup.reg. Since then I've been having issues such as no sound, I can't open "My Computer", "Control Panel", "My Documents", "Recycle Bin" When I try to I get an error message stating "there is not enough free memory to run this program."So I tried restoring the backup I made of the registry by going to Import and selecting backup.reg from there. But nothing changes in the registry at all. I just get various error messages each time I do that such as. "Cannot import C:UsersOwnerDesktopackup.reg: Not all data was successfully written to the registry. Some keys are open by the system or other processes." I've even tried doing it in Safe Mode.So my next guess I thought was to run System Restore but that hangs and never completes. The first time it ran I let it sit for 12 hours before I realized it was never going to finish. I've tried running it several more times since then, even selecting older restore points but it always hangs and I end up sitting here waiting for it to complete but it never does.I have Windows 7 Home Premium 64bit My computer is a HP Pavilion dv4 Notebook PC with 4 GB RAM and 76GB free space on Drive C. Intel Core processor. I don't have any usual configuration. It's practically new.I found someone else with the same problem on here, and one thing I was able to fix was by following the directions at the thread at
[url]...
Someone said to make sure All Users has permission to access the registry: Quote: Make sure that System and Users (and just to make sure maybe Administrators and your account name too) have more or less unrestricted access to the registry hive"HKEY_CLASSES_ROOT" So I added Users to HKEY_CLASSES_ROOT and now I can open My Computer and Control Panel etc, but I still have no sound. In fact when I try to put on an MP3 I get an error that says "Your soundcard driver does not support this type of sample format."What I'd really like to do is run system restore or be allowed to import my full backup of the registry to the point before all of this happened. What's the point of having a tool for backing up the registry and making restore points if you can't roll back to them?
I built a brand new computer for the holidays and it has been working fine. brief run down of hardware would be:[CODE]The computer has been running flawlessly using a 55" tv as a monitor with graphics on ulta for 2 weeks or so, there is barely anything installed on the computer besides necessary programs and 1 or 2 games at the moment. For the 2nd time now the computer has shut down instantly giving no warning, displaying no errors or coming back with any errors after running Windows 7 trouble shooters, the first time the computer had been on all day so I thought maybe over heating. But this second time the computer was only on about 5 minutes and did the same thing, I put a lot of time and is the first computer ive built so I would like to fix it before anything gets damaged but im not sure where to start
View 9 Replies View RelatedI very recently graduated and as a congratulations, my brother-in-law gave me a brand new Nvidia 9800GTX for my computer. I was running Windows 7 Professional 64-bit when I installed it and I immediately saw a drastic increase in performance. However, when I turned my computer off for the night, I noticed that it would hang at the shut down screen and never actually turn off.Refusing to believe that the new card was at fault, and having next to nothing on my C partition after my most recent formatting, I decided to go ahead and reinstall Windows to hopefully fix the issue. This is where my other problems started in. Suddenly Windows Explorer was crashing whenever I tried to use my disk drive and my system would randomly lock up. After assuming my install went wrong, I tried reinstalling twice more and neither worked.Finally, I got fed up and reinstalled my 32-bit copy of Windows 7 Professional and it still didn't work. As of now I've removed the new card and put my old 9500GT back in to find that I'm not having a single problem with the 9500.
View 6 Replies View RelatedEver since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedI have a Sony VAIO with Windows 7 pre-installed for more than a year. Completely random (actually - every 10 mins or so) the computer will freeze, brings up a blue screen stating that "A problem has been detected and your computer has been shut down to prevent damage". This stays on for only a second then the screen goes black. Five seconds later I get "Operating System Not Found". The only way I can use the computer again is to hold the power button down, then turn it back on again.
View 8 Replies View RelatedI (my wife) is running Windows 7 Home Premium (64). Windows explorer crashes when:
-Searching with more than 4 characters in the start menu
-Opening the Network and Sharing Center
-Various other times that seem unrelated
I have attempted:
-Startup repair X3 : it catches problems but doesn't repair them
-sfc /scannow command : also catches problems, and the CDA log shows all of the corrupted files.
-Copying the system32 files from a fresh windows install to fix the broken dll files while in another os : this didn't seem to have any affect
-System Restore doesn't have any images before the issue began
-Full system antivirus and malware scan and rootkit detection with no results showing (doesn't rule it out, but I used Norton commercial, Mbits, Lavasoft, and Kapersky online all in safemode, and some rootkit detectors)
-Repair Install : hangs when initiated
-Updating windows to SP1 : it seems the system attempted to update some time ago and failed or was interrupted. Now SP1 won't install, the updater hangs
-in an attempt to fix the windows update hanging issue, I tried:
-Installing the system update readiness tool (Download System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [September 2012] from Official Microsoft Download Center) : the update hangs too
-Installing the fix it program here (Fix the problem with Microsoft Windows Update that is not working) : didn't make a difference
-renaming the software center file as in this thread (Script or command to delete contents of Software Distribution folder?) and re-attempting to install sp1.
I (my wife) has some very expensive programs on her computer that we no longer have install discs for. She had them before we were married, but they seem to have been "lost in the move." We can probably work with each of the individual programs, but I'd sure like to look at other options that allow her to keep her file and program structure intact.
I am trying to run a Screensaver to install using Windows 7 I was given this to do Go to the attached .zip file and click it to run ,it will return a file called Install.exe right click on this file and select "run as administrator" the Batman screensaver will install. Next find a blank spot on your desktop and right click select personalize open screen savers and select install set you time interval and all should be well. Batman.zip When I click it to run , file called Install.exe right click on this file and select "run as administrator" the Batman screensaver The "run asadministrator"i it always ends up in Windows system c drive runs from their when I
View 1 Replies View RelatedJust setting up a new laptop with Windows 7 Pro. I would like to add a .scr file I created and used in my Windows XP Pro. Can I just move a copy of it into the Windows>System32 directory and then select it in the Personalization window (selecting the theme I'm using and then Screensaver)? In XP of course this was all done by right clicking on the desktop and selecting Properties. This brought up the Display Properties window where everything could be changed.
Anything to be careful of when adding to the System32 directory? Just don't want to screw anything up!
I set my screensaver for two minutes to check that it works properly. I have Windows Media Player running, and after 5 minutes, it still hasn't kicked in. Does it not work if WMP is running? I haven't touched the mouse or keyboard.
View 9 Replies View RelatedIf I set my screensaver, It still shows "none" (see pic) I have had this problem on 7077 and 7100 (i think before that too) on this machine the screensaver still works but is everyone else having this issue? I also have power issues on another machine. It keeps turning the monitor on. That could be a mouse issue although I've tried two mice and it still happens. I am having all sorts of issues with themes in general but have any of you seen this?
View 4 Replies View RelatedI just bought a new Gateway SX2802 desktop with Windows 7. I cannot get the screensaver to come on.
View 12 Replies View RelatedI am trying to run a Screensaver to install I was given this to do Go to the attached .zip file and click it to run ,it will return a file called Install.exe right click on this file and select "run as administrator" the Batman screensaver will install. Next find a blank spot on your desktop and right click select personalize open screen savers and select install set you time interval and all should be well. Batman.zip When I click it to run , file called Install.exe right click on this file and select "run as administrator" the Batman screensaver The "run as administrator"i it always ends up in system 32 runs from their when I go to the screensaver list install which is the Batman Screeensaver name is frozen can I post a screenshot please can someone run the Batman.zip
View 1 Replies View RelatedWin 7 Home Prem SP1, 64 bit, 8 gb ram. Only using the screensavers that come with Windows, no matter which one I select at varying times it will fail. I can normally reboot and it works again for a time or switch to a new selection where it will work for 2-3 weeks again. I can't find any information on others experiencing the same issue and have been using numerous virus/spyware apps to find anything. MS Security Essentials, Avast, Stinger, Housecall, SuperAntiSpyware and only find tracking cookies.I know it would help if I could get the exact error message and will update when I do get a chance to write it down.
View 5 Replies View Relatedcant get screensaver to activate
View 2 Replies View RelatedWhile looking around i find an app that was make for windows 95 it worked on windows 7 also
What it does it that it runs your screensaver as wallpapers
link to app here
http://www.kuhj.com/down/scrpaper.htm
i have worked out if you go
task manager > processes > then close scrPaper.exe
that will close the box but leave the background running
(stop background to go processes then find (name of screensaver).scr
There is only one problem with this, it hides all your desktop icons anyone have an idea how to fix this?
can anyone help is there a way to get photo screensaver to show photos in wide screen?
View 6 Replies View RelatedI've asked the screensaver to become active after 10 minutes of inactivity on the computer.For some reason this does not happen. I've tried to disconnect USB services such as wireless mouse, keyboard and joystick without any luck. The preview of the screensaver will start perfectly and moving the mouse a bit stops it, however in normal use of the computer the screensaver will not start.
View 7 Replies View Relatedmy screensaver has worked in the past. at some point i noticed it was no longer working, so i messed around a bit. i think all i did was change the time to something different, and it came back to life for another day or so. it has stopped again, and all of my old tricks are no longer working. i'm pretty sure i have all the power settings correct, and i've been using the screensaver window for years, so those are correct too. I've read about wireless keyboards and mice being a problem, but both of mine are wired.
View 8 Replies View Related