cross country with an issue she's having with her laptop. Every time she starts it up normally it will boot normally, display the windows logo splash, and initiate windows. Her desktop will load up and will begin to propogate. About 20-30 secs in, she'll get the BSOD.Unfortunately, since the laptop is not in my possession, I can't get the crash report; however, before the BSOD, the comp displays:[CODE]
View 2 Repliesi used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedI have SLI GTX 580s. Yesterday I was playing a lot of The Secret World and the computer was working fine. I shut down and today when I try to start it up I get a BSOD and the computer reboots. I can start it in safe mode and I get this message:[CODE]I tried both cards by themselves, one of them works fine but the other one gets these errors. I don't know what to do. They were both absolutely fine yesterday, no artifacts show up on screen for the card that isnt working, just when I install Nvidia drivers it all goes to hell.
View 3 Replies View Relatedi restarted my compure about an hour ago for it to complete a windows update, on the logout screen and showed: installing updates, it jumped from 10% to 20 and thirty and the skipped to shutting down.when starting back up again i got a BSOD saying:STOP: c000021a {fatal system error} The Verification of a knownDLL failed. system process terminated unexpectedly the system has been shut down.in the startup repair i get:startup repair cannot repair this computer automaitcally.
Problem Signature:
Problem event name : StartupRepairOffline
Problem signature01 : 6.1.7600.16385
Problem signature02 : 6.1.7600.16385
Problem signature03 : unkowen
[code]....
for some reason i cant find how to enter safe mode on this mobo (its a new computer)ive hit F8 and it just takes me to a boot priority. F10 11 12 arnt for safe mode either.
I am not computer savvy when it comes to these sorts of things. The heading states it all and am wanting a bit more of an insight at any problems that may be occurring etc.. Also, as of late I have noticed that my DVD player refuses at times to read a DVD movie or game title, and only after a few open / closes it seems to work. - x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit - the original installed OS on the system? As Above - an OEM or full retail version? Retail Version
View 3 Replies View RelatedI have BSOD on a cold startup everyday. On most time after the first BSOD of the day the PC will run fine for that whole day. There will be two consecutive BSOD on certain occasions. The problem stops for a week after I updated the NEC USB 3.0 Host controller so it seems there is other problem causing the BSOD but now I am not so sure.
View 6 Replies View RelatedHad this error yesterday after starting the computer. Did a startup repair but it didnt fix it. Can't boot into safe mode. Right now doing startup repair again.
View 1 Replies View RelatedI am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"RunDLLError in C:Users(my name)AppDataRoamingactxprxy1.dllMissing entry:IgwqI just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions.
View 9 Replies View RelatedSo I get this BSOD when my machine starts up, right after the BIOS/memory/harddrive screen. Can someone please tell me what this means?
(Sorry I cant get a dumpfile because I cant get past this and get the OS up.)
I hope I have done everything correctly as far as following the instructions to report my bsod problems. I've noctice it usually resets and bsod after I logged into windows? if it doesn't crash in the first few minutes upon entering windows then it seems my system would be stable for hours on end.
View 3 Replies View RelatedRecently I built a new pc and I've been getting random BSOD's while on startup or soon after my desktop loads and also during shutdown sometimes.Here's my recent crash info from WhoCrashed:
[code]...
Had to install in safe-mode. After install, my graphic card was recognized and the drivers started working! 64-bit is WAY faster than 32-bit...Or is it just 7600 being faster than 7100...
View 0 Replies View RelatedI attempted install of RC1 on a new hard drive and got as far
as "Completing Installation". System reboots and after logo goes
to black screen. No error codes.
Reboot and selected Safe Mode. Win 7 says "Can't complete installation
in Safe Mode".
Reboot, press F8, select Low Resolution. Same results. Black screen.
System configure:
Asus P5Q3 Deluxe Wifi
4 gb DDR3 memory
E8500 Intel Processor
EVGA Nvidia GeForce 9800GT with 512 mb ram
On board Marvel Lan
On board Ralink Wifi
On board sound
1 - 500 gb SATA II hard drive
1 - Sata DVD
This machine runs Windows Vista Business with absolutely no problems.
This machine runs Mac OS X 10.5.6 with Absolutely no problems.
This machine runs Windows 7 Build 7000 with absolutely no problems.
I use a different hard drive for each operating system and I have
a brand new drive that I'm using to install Win 7. The drive I'm
using to install Win 7 can run Win 7 Build 7000 perfectly.
I do a clean install attempt to install RC1 and I get above results.
I reinstalled Win 7 Build 7000 on the same drive and just before boot
it says "Checking Vidoe card performance", then reboots and Win 7,
Build 700 is installed.
On clean install of Win 7, Rc 1 it appears to get to the exact same pont
(although I don't see the message about testing performance), reboots,
and gives black screen.
I have been on a couple of board and the predominant them is BSOD's
at boot for machines running Nvidia graphics. It would appear that RC1 has fouled up the Nvidia drivers.
I can't get into Low Res mode to load the approved 9800gt drivers from
EVGA so I can't complete the installation.
I'm hoping someone from Microsoft sees this and comments.
Any other thoughts or suggestions would be welcomed.
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
View 2 Replies View RelatedThis also happened to me (the BSODs) but not after installing RAM - I'm not sure what the error code was though, I upgraded my OS from Windows 2000 Professional to Windows 7 (I actually installed Windows 7 on a different partition) and didn't actually do an "upgrade" - but I wasn't sure if I should "uninstall" or delete the old Windows OS from the other partition. Not sure how to go about doing that - just by deleting, or having to clean registry keys, etc. I also had to install a new video card - since my previous one would not work right under Windows 7.
View 1 Replies View RelatedGetting this BSOD when starting it up in the morning. Afterwards the computer runs normally.I've tried to enable creating minidumps, but 3 days in (and 3 bsod's) it hasn't created one yet.I've copied info from the BSOD and Event Viewer below. Please let me know if any more info is needed.-Technical Information from the BSOD below: Code: *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA00E399B30, 0xFFFFFA800E399E10, 0xFFFFF80002F935F0)
View 9 Replies View Relatedi just recently started getting BSOD at windows startup, ive attached a Windows_NT6_BSOD_jcgriff2 file.
View 2 Replies View RelatedI had a thread before with some blue-screen errors, mostly memory errors, so upgraded my RAM (8Gb DDR3), installed a new operating system (32bit to 64bit) and on the first boot-up: CRASH.
View 3 Replies View RelatedRecently I've been getting this BSOD over and over. It happens about 20 seconds after my computer reaches my desktop when I start up. I happens about 95% of the time I start up my computer. The other 5% it starts up normally w/o any problems. ( Which I think is weird)I had recently bought a graphic card (check my specs), but I had it for about 2 months before I started getting the BSOD.
View 1 Replies View RelatedWindows 7 told me it had downloaded SP1. I set it to install and it said it would take 30 minutes so i walked away from the laptop.
I came back, and now I get BSOD very time i switch it on.for some reason i can't download the system file collection app, but i have zipped minidump.attached minidumpB is without any system config, normal windows startup with graphics adapter disabled,attached minidumpRestrict is with 'selected startup' with windows services disabled and no startups. with graphics adapter disabled.Both of them enter BSOD shortly after startup, after the windows icon has come, and when you would usually expect the wallpaper to appear.safemode works fine.windows 7 professional 32bit. laptop 2 years old. 6 months ago I had mother board fried and when i got laptop back repairer had partitioned hd into C:
System D: 1.11gb free of 1.46gb
HDDRECOVERY 544mb free of 5.63gb
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
[code]....
I am experiencing BSOD on nearly every boot or restart. Once the computer has been up and running for about 10 minutes, after perhaps two boot attempts, I seldom BSOD until I boot up or restart again. Sometimes the BSOD occurs before windows even fully loads, and sometimes it occurs a few minutes after the desktop appears.I have attached everything requested in the posting instructions (I think). Additionally, I have included the last four dumps
View 9 Replies View RelatedSo I am getting BSOD on startup of my newly built computer. This started occuring yesterday, 6 weeks after the computer was built. I am suspecting a hard drive failure (booting from a SSD)
View 6 Replies View Relatedwent from 7850, to 7970, to gtx680 that is now RMA back to the old 7850, and getting a new 7970 on sunday. Now, I uninstalled everything I can find that has to do with either nVidia or AMD, and it still BSOD right on startup: Used Driver Sweeper to clean all drivers, and even went manually and deleted every single one that has AMD, Gigabyte or Radeon written on it.
View 2 Replies View RelatedI have an Acer 3400 desktop. Tonight, its started BSOD.
When I start it - the Windows 7 splash screen appears, after a few seconds, every time, the BSOD appears. The error comes up very quickly (far, far too quick for to read).
I've tried booting from a different HDD (I'd did a Windows clone a while back to a (hybrid) SSD, so tried booting from the original HDD) - but still get the same problem - so I'm assuming not a Windows corruption or HDD problem?
I've been having a problem recently with windows 7. Mainly on start-up.
After the bios and during the windows start up screen or even during the log in screen, I'll get a bsod either just a memory dump or Reference_by_pointer. I use the windows recovery on start up next boot and it does its thing. After the system restart windows logs in but then explorer.exe crashes and the desktop windows manager crashes.
Which leads to a BSOD (Reference_by_pointer). I would try to access the dump file or the file that windows dumps the error into but I cant access my system and safe mode boots up with no taskbar or icons and eventually blue screens.
I have ran Diagnostic tests on my HDD and RAM both check out. Also this doesn't just happen when im using my pc. Like when I re install windows its fine I can restart 100 times and it will still boot, but when I turn the system off for the night... well thats when it all goes south.
System specs if this helps)
AMD Phenom II 925
MSI NF750-G55
DDR3 1600mhz 2gb stick
also using two WD 320GB caviar drives in a Raid 0 but b4 I got the raid set up this issue was happening.
Programs I ran this install hope its just a program issue)
Comodo Firewall and AV
Steam
google chrome
I hope someone has had this issue too or knows how to fix this. cause I've google'd the blue screen and it seems people get this with network issues.
yesterday I started expericing BSOD on startup with the following error message, I can boot system from safe mode; and i have ran memory diagnostic test and hard drive test can no problem has been found. Btw windows boots normally when I removes atikmpag.sys, I have attached a error dump file.
View 5 Replies View RelatedRecently my computer has been randomly just giving me the BSOD. Normally this problem was resolved by a simple restart but tonight about an hour before I posted this, the blue screen sent me back to startup but instead of giving me the usual "Security mode" and Regular Startup. It gave me Startup Repair and normal startup. After clicking normal startup just to see if it would correct itself like normal,my pc instantly BSOD'd, bringing me back to my two options. I've been sitting here staring at the startup repair screen for about an hour now.
View 2 Replies View Relatedmy computer was running fine then yesterday i suddenly got shut down and anytime i turned it back on i would get a BSOD after a few seconds unless i went to safe mode its a page_fault_in_nonpaged_area 0x00000050.the only thing different is i downloaded borderlands from steam, played for about 8 hours, then got the packs running, then 10 mins later it shut itself down on its own currently system restore only had 2 options for 8am when i downloaded borderlands, 1 said critical system update adn the other was direct x 9 im not good with computer hardware so if u need any more info tell me, but heres some system stuff System Info Processor: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
[code]...
I decided to upgrade my computer and installed a new mb and processor. However with the new build the computer refuses to start up properly with more than 2Gb of memory installed. The machine runs fine with 1*2Gb of memory but as soon as I install a second stick I get a BSOD during windows startup.
Same thing happens if I install my graphics card. Memory sticks has been tested with memcheck86+ and individually they all work fine, in all slots. I can also run memcheck with 4Gb of memory installed without problems. BIOS is current as well as all drivers I can think of.
ASUS M5A88-V EVO
Corsair 2*2 Gb XMS3 1333
Intel SSD 120Gb
AMD FX-6100
BSOD on startup. Its 32bit. I Replaced a video card about a week ago due to page fault in non page area. Now I'm getting an error with ntkrnlpa.exe with a registry_error. Can someone please take a look at the dump files. I will attach the dump files from the diagnostic tool.
View 5 Replies View RelatedI Have Vostro 3300 i3 , Corsair 8GB (2*4GB) 1333MHZ, 120GB Agility 3 SSD. Installed a fresh copy of windows 7 Enterprise x64. I get a blue sceen every second time I turn my comp on, something strange. What can it be?
After I boot again I see that window: Quote: Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.4
Locale ID:1037
Additional information about the problem:
BCCode:50
BCP1:FFFFF80000CB9C40
BCP2:0000000000000000
BCP3:FFFFF80002E03418
[code]....