I recently fixed and reinstalled my OS. Well once I did, my sound decided to simply stop working. I have updated all my drivers, Set as default device, checked sound manager, and even used headphones. Nothing. I have both a PC-Monitor cable and a HDMI. Neither one works. Even though I hear no sound, Realtek HDA still shows audio going on.
View 5 Replies
as stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.I have a dell inspiron 531. The hardware ids from the device manager areHDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020EI have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.Does anybody know what might be causing this? I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!)
If anybody knows a fix for this I really would be eternally grateful
as stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.
I have a dell inspiron 531. The hardware ids from the device manager are
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E
I have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.
I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!)
I bought my VGX-XL301 in August 2007 and it cam installed with Vista home addition and upgraded to Windows 7 Professional in April 2010. I have the computer linked to my Samsung HDTV via an HDMI connection.
Everything worked fine up until recently.
I am working on the computer and then switch HD inputs to watch TV. After a time the compuiter goes into sleep mode. The next time I want to use the computer, I press a key to bring it out of sleep mode. I switch it from the TV HD input to the PC HD input but no picture comes up.
I have to force a shut down by holding in the power button and then turn on. The PC then goes through the boot up and the PC picture appears, however sometimes it takes 2 or 3 forced shutdowns to make it work.
I have upgraded the driver on the graphics card as I thought that might be the problem.
I have a Diamond ATI HD 5670 graphics card installed, and when ever I try to connect my Toshiba LCD HDTV 40E220U to the computer it comes back saying "No Video Signal", I tried what the manual said for the HDTV. But it still wont recognize my HDTV, what should I do?
View 1 Replies View RelatedI just finished a new machine, EVGA VIDIA GeForce 9800 GTX+ card. The card has two DVI outlets - 1 S Video outlet. I'm using a Sony Bravia 32" XBR for a monitor.
Using a DVI to HDMI adapter gives me a not so good picture.
Using a DVI to VGA adapter and connecting to the TV in the "PC IN" area, give me a better picture, but still nothing all that great.
Using my Dell laptop, with NVIDIA GeForce 9400M G video and an HDMI outlet gives me a great picture when I go HDMI to HDMI.
I know I am not happy with what I have, I don't know what to do next.
My 1st thought, based on the laptop experience, is to get a video card with an HDMI outlet.
My 2nd thought is to try the S Video connection, which I would if I had a cable.
My 3rd thought was to come here and ask advice from people who probably can come up with more than 3 thoughts at a time.
I've been trying to connect my laptop to a HDTV. I have the required (I think) cable, it connects well to both laptop and TV, I can see the image on the TV screen, but the image on the TV is small and centered. It's probably twice as small as the screen itself. I want to stretch it, but I don't know how. I'm really not sure that the problem is the laptop and not the TV itself, though.I don't know what specifics to include. I can add anything that might be required The TV is 1080p, maximum resolution on the laptop is 720p. I tried connecting the cable to all 4 HD slots in the TV and some give different results. Some are more stretched than others, but not full screen. I tried changing the TV option
View 2 Replies View RelatedDoes anyone use there 1080p HDTV as a monitor? If so do you think that the font's, icon's and the rest of the display make things apear to small although you have more room on screen etc?.
View 2 Replies View RelatedHey I'm running Win7 64 bit. My laptop has the nvidia 330m. I have a standard HDMI cable hooked up to my HDTV. I can get picture perfectly, but no audio. I do not see any kind of option to do so.
View 6 Replies View Relatedhow can we record vedio from Hd tv to pc tv is compatible to perform pc & tv differently?
View 1 Replies View RelatedHow can I I see my dell laptop screen on my hdtv
View 8 Replies View RelatedI don't have a software for installation so where can i get it from any website
View 1 Replies View RelatedConnecting computer to HDTV?
View 1 Replies View Relatedi want to know can i set 1080p HDTV resolution on my Monitor ? theres a option to add 1080p24 format as display but when i select it i get a message 'forcing display mode tht exceeds the reported capablities of its EDID may result in a blank screen or permanently damage the display' currently i am using 720p HDTV resolution
View 3 Replies View RelatedI am using my Sony Bravia LCD PC jack for the my pc's display(for the moment until I get a longer HDMI cable). The screen is severly shifted and I cannot adjust it by just uing the hortizal control, it is still out of range. Is there another way to adjust it via windows drivers to minize the shift(like in linux)? Any help would be great.
Oh BTW, I also am using the latest ati driver 9.10. I had the same problem with the windows driver.
I have recently bought a HDTV from Philips 32" and it is announced as 1080p.
Now, when i tried connecting it to my computer, it says that 1366x768 is the native resolution, and not 1920x1080. I have even tried creating a custom resolution as 1080p to see if it works , but no luck.
So, how do i get this TV to work on 1080p?
Or better, how do i check to see if it really is 1080p?
i need to know the best settings and best player for quality. toshiba 40g300u 40inch tv hooked up to my acer computer with hdmi port. the acer has a geforce 7100 with latest graphics drivers. its just i dont understand if i need to run 16-255 or 0-255 and how to adjust the settings in the nvidia control panel.
View 5 Replies View RelatedI would like to stream HDTV content from my pc to the media center on my xbox360.technically it's no big deal. however, i cannot reach the respective streaming performance necessary for this type of content.my setup:router: d'link 524 (100mbit) (tried wireless & cable)pc Windows 7 64bit connected to router via powerlie 85mbit adapterxbox360 connected to router either wireless or through cable to router with this setup windows media center tells me that i don not have enough bandwith for hdtv content - i barely reach sd tv standard.is there an option that the router settings throttle the performance?
View 3 Replies View RelatedI have an hdmi to dvi 6 ft cable; how do i use this cable to connect my gateway pc nv54 to my sony bravia tv??
View 1 Replies View Relatedfrom where i can download HDTV USB DVB-T WINDOWS 7 DRIVER?
View 1 Replies View RelatedI'm trying to connect my IBM SL510 laptop to my SONY Bravia TV. I've seen online that an S cable is required. I thought I could use an HDMI cable. Also, I don't see an S cable port on my laptop.
View 1 Replies View RelatedI just built a new gaming rig with 8gigs of RAM. I made the mistake of installing WinXP Pro x32 on it. I find out that 32 bit OS's can't access 8 gigs of RAM, so I went and bought an OEM Win7 64 bit disk. Come to find out now, Win7 x64 doesn't play well with many HDTV's. Something about they changed the instruction in Win7 to not allow for overriding something called the EDID signal from the HDTV. So now I'm screwed again. Now I got 8gigs of RAM but no video. Great. What now?
I need to go and buy a third OS that will work this time? WinXP Pro x64? Yeah, it's not the video card, the video card drivers, or the TV. It all worked just fine with WinXP Pro x32 installed. And all the cables are plugged in tightly. Win7 x64 will output video signal to a generic VGA monitor. If I set the resolution to like 1024 x 768 or something then swap the VGA cable from the VGA monitor to the HDTV I get video signal. As soon as I reboot, no video signal. I get video for the post screen and the Win7 startup screen.
As soon as it trys to boot into the desktop, no video signal. My AKAI TV only says "Not Support". Win7 will not get past the HDTV EDID handshake. Win7 sucks. Now I find myself looking at the Windows web site HDTV "compatibility list" for Win7. Like trying to work my life around bill gates and his crappy software. Serving Windows instead of it serving me. When will those people ever get it right again after WinXP? Any workaround that will make Win7 override the HDTV EDID handshake?
After connecting VGA to VGA connection for lap top with windows 7 to HDTV and scrolling to PC designation on HDTV set, a message comes up "no device connected/no signal".
Can you tell me what setting on Windows control panel I should use? . . . or what other issues must be checked.
For the past week or so my sound is not working at all. I've tried restoring to an earlier point and that didn't work. I went into realtek audio manager and my speakers are set on default. I don't know what else to do.
View 2 Replies View RelatedI just bought a Lenovo v570 laptop with vga and hdmi output and I cannot get the hdmi to output to my tv. The tv is a vizio 47" 3d LCD and the laptop is running windows 7 home 64bit. I have tried windows graphics drivers, lenovo drivers and intel drivers. To me there is not much difference between them but who knows. The laptop will output to tv using vga and it will connect to an LG 42 inch LCD at my work using hdmi, just not to the one I have at home. I have tried everything that I can think of as far as settings go and on my tv as well. Nothing changes whatever I do. Does anyone know of any hardware compatibility between some vizio tvs and windows 7? I have seen one on the compatibility website for windows but it was not my tv. Mine is not listed. The model number for my tv is E3D470VX. Not sure what else to try. Next I guess I will call Vizio to see if they can work out the problem. Lenovo support doesn't know.
View 9 Replies View RelatedI have done some searching but to no avail. I have tried everything I can find/think of with absolutely no luck.
I have a brand new Samsung LN46B750 which I have connected to my desktop for use as an HTPC. VGA works fine, but I would much prefer to use a digital connection. SO, I have an HDMI <> DVI adapter and a monoprice HDMI cable connecting my GeForce 6800 to the HDMI/DVI port on the HDTV.
I have tried 182.5 and the latest Nvidia drivers as well as the generic Windows 7 drivers. It's all the same.
Everything works fine in the OS so long as I make it past the Windows splash screen. And unfortunately, that never happens. I believe that the problem lies in the auto adjustment of the screen when 7 starts loading. (If I boot without the TV connected, and then connect after the splash screen has loaded, everything is perfect.)
Is there any way to disable the auto detection/adjustment of the TV and just have the OS always boot into 1920x1080 @ 60 Hz. I am really tired of the blank or black screen every time I reboot. This is a terrible bug with Windows 7 or EDID and it needs to be fixed now Microsoft!
how can i have 1366x768 resolution via the ordinary pc vga cable i have an hdmi port in the tv and the graphics card but the problem is i have an xbox 360 which is connected to the only HDMI port in the TV so the xbox is connected via hdmi and the pc is connected via VGA i have a samsung La22B350F2 TV?
View 3 Replies View RelatedWhat commands do i use to connect laptop to samsung dvd player to run picture through my HDTV
View 1 Replies View RelatedMy sons set me up with my old pc an new pc sharing my hdtv as a monitor. Wires came loose wile I was trying to re-arrange and now only one pc is seen when I choose inputs. is there a good link that shows the wiring diagram for modem, router, pc, tv, dvr...?
View 1 Replies View RelatedI installed 7 on a Dell Dimension 4600 1 GB Memory, ATI Video card, onboard sound. Everything seems to run fine but my audio. I had to install the latest AC97 drivers that just came out to get rid of the exclamation point in Device manager. When I click on the speaker icon or go to properties it shows sound is going through but nothing comes out the speakers. I have a second HD with XP and the sound works fine so I know my hardware is OK. Any suggestions to get my sound working?
View 3 Replies View RelatedThis HP upgrade from Vista to Windows 7. I have video but no sound at all. I went to intel's website and downloaded the intel graphic drivers. But the sound drivers say un-recognized. In my device manager I see IDT High Definition Audio CODEC and Inter(R) High Definition Audio HDMI. My HP model is dv4-1465dx
View 49 Replies View Related
