I am using my Sony Bravia LCD PC jack for the my pc's display(for the moment until I get a longer HDMI cable). The screen is severly shifted and I cannot adjust it by just uing the hortizal control, it is still out of range. Is there another way to adjust it via windows drivers to minize the shift(like in linux)? Any help would be great.
Oh BTW, I also am using the latest ati driver 9.10. I had the same problem with the windows driver.
I have a Philips 220VW 22" 16x10 monitor and till a year ago I had a similar 22" 16x10 Philips monitor(had to replace it since I had some problems with it). After using Windows XP for quite some time I decided to give Windows Vista a try (that was back in 2007). However, every time I boot up or restart Windows, when reaching Windows Vista boot screen (the one with the green blocks, not the log in screen), I had to wait about 10 seconds while the monitor was trying to center the Windows logo without luck since the logo ended up somewhere in the low right corner of the screen.
Unfortunately, this happens on Windows 7. I contacted Philips and they claimed that this is not a hardware issue but a software issue since everything else was fine. I was told that Windows 7 does not have a proper scaled loading screen for this monitor???. This also happens when, by any chance, I end up with the Windows fail options screen (the one with last goon known configuration, normal boot etc - don't know how it is called ). I know I don't spend too much time staring at the loading screen but is there any way to fix this?
I have a Dell 1525 with the intel 965 chipset graphics. I had XP and Vista 32bit installed previously and the graphics drivers would have an extra option to change the horizontal and vertical position of the screen. But now with Seven x64 and the drivers downloaded from Update, I can't seem to fix the problem.
Whenever I have a program maximized on my hdtv a few pixels width wise will be off screen. Just enough to have the menu bars and scroll bars off screen. Are there any third party programs to fix this? I tried installing x64 Vista drivers and they would invert and wash out the colors on my screen, totally unusable.
My screen show box display rather than full screen size after downloading Microsoft Windows 7, how can I get Full screen size
View 1 Replies View Relatedmy display screen does not fit my monitor and i dont know how to make it fit it is a 1920x1080 ASUS VS239H
View 6 Replies View Relatedafter i installed windows 7 now the display is not taken up the whole screen on my laptop any ideas.
View 9 Replies View RelatedBasically I have an acer aspire z5761 all in one pc and I installed the hdmi pci card. After it was installed I plugged in my hdmi cable from my xbox to my pc, my only problem is, how do I display the xbox on my screen? When I turn on my computer it runs normally as if it would, is there a button or something for me to switch mode?
View 1 Replies View RelatedI just recently noticed that my screen will black out for a few seconds and come back, and when it does it changes my monitor set up so that 2 is main monitor and 1 is the off monitor, I tried changing it so it only showed monitor 1 but it still seems to be blinking.
View 1 Replies View RelatedI bought my VGX-XL301 in August 2007 and it cam installed with Vista home addition and upgraded to Windows 7 Professional in April 2010. I have the computer linked to my Samsung HDTV via an HDMI connection.
Everything worked fine up until recently.
I am working on the computer and then switch HD inputs to watch TV. After a time the compuiter goes into sleep mode. The next time I want to use the computer, I press a key to bring it out of sleep mode. I switch it from the TV HD input to the PC HD input but no picture comes up.
I have to force a shut down by holding in the power button and then turn on. The PC then goes through the boot up and the PC picture appears, however sometimes it takes 2 or 3 forced shutdowns to make it work.
I have upgraded the driver on the graphics card as I thought that might be the problem.
Recently I got rid of my Windows XP and installed Windows 7. In the beginning I didn't notice any discrepancies and I started filling my computer with useful programs. I was interrupted by a crash that basically makes the screen become dark blue with lines going diagonal. Also what was strange was that when I used button combos such as alt+F4 and ctrl+alt+del it changed color and I could hear background noise the same as when it is running normally. Therefore, to sum it up, my monitor display crashes randomly even upon startup or when I use some programs. As a result I tried the Windows 7 compatibility checker and everything seemed alright.
OS: Windows 7 32-bit
CPU:Intel(R) Core(TM) Duo 6300 1.86 GHz
RAM: 2 GB RAM
VIDEO: NVIDIA GeForce 7900 GS
I have a Toshiba Satellite C655-S5142 & Toshiba tells me the video card supports TV out. One article tells me all I need is a VGA to s-video adapter, but that doesn't work. (E-How) Another article tells me the jack on my computer must match the jack on my TV. (Windows.microsoft.com).
Too new to computers to know if this is needed to answer my question, but Windows 7 & Google Chrome.
Is what I'm attempting possible, or is it time to break down and get with the program with a HDTV ?
so since I updated my laptop to Windows 7 I've been having some trouble playing in full screen mode. Everytime I launch a game 2 black bars pop up on the right and left side of the screen not allowing to display the entire screen section. Below I send a picture of what really happens:
Also: (Toshiba Satellite L500-12G)
Windows 7 Home Premium 32 bit
Intel (R) Core (TM)2 Duo T6500 2.10GHz
4,00GB RAM (2.96GB usable)
The monitor screen used to be displaying POST progress before Windows begins. But the screen now stays in black until the Windows begins. What could be the remedy?
View 3 Replies View RelatedThis is on my old PC and im trying to fix it but im not sure if the mobo is no good or the psu or what. The PC can power on as well as the fans but maybe 5-10 seconds later the fans turn off and there is no display on the screen but the PSU fan is still going.
AMD Pheonom X4 9550 Quad Core
Nvidia 9100
6 gb ram
64 bit
i'm running a vaio vgn nr21s/s (nvidia 8400MGT) with a samsung syncmaster 226bw ( 22') connected by a vga connector and i cant have my max resolution (1680/1050@60htz) in Windows 7 x64
i tried a dozens of drivers, the new and the old ones (laptopvideo2go, dox moddified...) for Windows 7 x64 and for vista x64... and still the same problem, still stuck at 1600/1024
i thought it could be the vga connector but im running xp pro 32bits too and theres no problem with that i can get the right resolution.
I have a shuttle Windows 7 pc setup as a media center, running a ati radeon 4550 over hdmi to a sony lcd tv.After the system has booted (on a ssd for os, harddisk for data,1gig network nas for films and music) i get intermittent problems with the display blanking outWhen it starts it goes every 3 mins, with the tv loosing signal for a second then the display returning.Ive tried...Swapping the hdmi cableReinstalling the osSwap graphics card for nvidia Adding extra cooling to the ati4550 card to keep it down below 50c.Even got a new barebones case and motherboardReinstalling the os seemed to resolve it for a while, then it reappeard after a few weeks.
View 1 Replies View RelatedWhen I open my Windsor program I can see it is open but it won't show anywhere. I have an extended screen and I can see when the program opens that the screen flashes and it looks like the program is hidden. I have tried all the options I know of including re-installing software.
Some more details. The program I run had four charts open and when I last closed the program I had one of the charts expanded.
How to Change the Screen Resolution in Windows 7 ?
View 0 Replies View RelatedFull screen display? DOS Command
View 2 Replies View RelatedWhen I right click my window screen there no display properties appear....
View 1 Replies View RelatedFor some reason the screen shifted to the right and down so that I cannot scroll or see the bottom of the screen. I would like to readjust.
View 7 Replies View RelatedI just installed Windows 7 on my VAIO laptop. Now the volume bar on the screen doesn't display when I hit the volume control button on the keybpard.
View 4 Replies View RelatedI have a Diamond ATI HD 5670 graphics card installed, and when ever I try to connect my Toshiba LCD HDTV 40E220U to the computer it comes back saying "No Video Signal", I tried what the manual said for the HDTV. But it still wont recognize my HDTV, what should I do?
View 1 Replies View RelatedI just finished a new machine, EVGA VIDIA GeForce 9800 GTX+ card. The card has two DVI outlets - 1 S Video outlet. I'm using a Sony Bravia 32" XBR for a monitor.
Using a DVI to HDMI adapter gives me a not so good picture.
Using a DVI to VGA adapter and connecting to the TV in the "PC IN" area, give me a better picture, but still nothing all that great.
Using my Dell laptop, with NVIDIA GeForce 9400M G video and an HDMI outlet gives me a great picture when I go HDMI to HDMI.
I know I am not happy with what I have, I don't know what to do next.
My 1st thought, based on the laptop experience, is to get a video card with an HDMI outlet.
My 2nd thought is to try the S Video connection, which I would if I had a cable.
My 3rd thought was to come here and ask advice from people who probably can come up with more than 3 thoughts at a time.
I've been trying to connect my laptop to a HDTV. I have the required (I think) cable, it connects well to both laptop and TV, I can see the image on the TV screen, but the image on the TV is small and centered. It's probably twice as small as the screen itself. I want to stretch it, but I don't know how. I'm really not sure that the problem is the laptop and not the TV itself, though.I don't know what specifics to include. I can add anything that might be required The TV is 1080p, maximum resolution on the laptop is 720p. I tried connecting the cable to all 4 HD slots in the TV and some give different results. Some are more stretched than others, but not full screen. I tried changing the TV option
View 2 Replies View RelatedDoes anyone use there 1080p HDTV as a monitor? If so do you think that the font's, icon's and the rest of the display make things apear to small although you have more room on screen etc?.
View 2 Replies View RelatedHey I'm running Win7 64 bit. My laptop has the nvidia 330m. I have a standard HDMI cable hooked up to my HDTV. I can get picture perfectly, but no audio. I do not see any kind of option to do so.
View 6 Replies View Relatedhow can we record vedio from Hd tv to pc tv is compatible to perform pc & tv differently?
View 1 Replies View RelatedHow can I I see my dell laptop screen on my hdtv
View 8 Replies View RelatedI don't have a software for installation so where can i get it from any website
View 1 Replies View RelatedConnecting computer to HDTV?
View 1 Replies View Related