Shutdown Due To "Thermal Event"
Jan 21, 2013
What's happening is my system shuts down almost immediately upon power up. Yesterday I could keep hitting the power button and it would intermittently get a little further into the boot sequence, finally getting to the screen where the "Thermal Event" message displayed and gave options to either hit F1 to continue (where it would usually shut down again), or F2, where I would get into the setup, mess around a little without making any changes, then exit out and the system would boot up and run fine until I powered it down.
The issue began after I installed a new SSD and upgraded to Windows 7. I upgraded from a 32 bit version of XP to the 64 bit version of 7.
View 12 Replies
ADVERTISEMENT
Mar 6, 2012
My desktop was shutting down because of thermal event. I cleaned everything, applied new thermal paste, after that re installed windows but still it beeps when booting and shuts down all of a sudden. Occasionally it worked for an hour or so flawlessly. If it is again because of overheating it should shut down after 5 minutes or so when it heats up not when starting it in morning (after keeping it shut overnight). It shuts down even before booting.
View 6 Replies
View Related
Dec 18, 2009
I recently upgraded from Vista to 7 Home Premium 64-bit on a month-old machine. The computer has been running 7 for several weeks, and this error just showed up within the last couple of days.
When I go to shutdown or restart, I get a screen that says Waiting for background processes to close. The screen is only up for maybe a second, with no list of what process needs to close. Then Windows shuts down normally.
I went through msconfig and determined that the RAID event monitor is the program causing the hangup. What does this mean? Has anyone else encountered problems with this? Is there any way to fix it other than just disabling the program in msconfig?
View 2 Replies
View Related
Nov 12, 2012
I am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown
2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers)
3. Multiple Chkdsks
4. Checked system, power, performance, battery etc with Vaio Care
5. Tested it unplugged and plugged on battery
6. Toning down my power plan's maximum processor usage, changing system cooling policy
7. Reinstalling service pack
8. Cleaning out registry with CCleaner
9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
View 1 Replies
View Related
Jun 1, 2011
It is win 7 with updates. I built it a little over a year ago. It restarts all by itself. The event viewer shows a kernel error and improper shutdown. It may restart once or maybe twice a day or not at all but It happens too often and started a while back. I have checked temp using Sisoft sandra but its not overheated. The only thing unusual to me was the power supply fan seems to kick in twice. Its done that since it was new. It still does it at times but not always. The Power supply is a Fatality 550 w. The amd processor is low watts and so is the video card. I don't like the idea of replacing stuff just to see if it works. I don't know if ram or memory error could cause something like this?
View 10 Replies
View Related
Aug 18, 2009
I have a thermal label printer that is manufactured by Zebra. It's used for printing UPS labels etc.
Windows sees it as UPS Thermal 2844 but says it has no drivers.
I've tried getting all the various driver packages from Zebra's web page for this model and it simply won't work. Windows says it can't even find a driver for the dang thing.
This is my work computer so I'm kinda SOL til I can figure something out.
I figure someone has to have run into this by now. I tried Googling but found nothing.
View 9 Replies
View Related
Jun 12, 2012
Alright, this was my first time removing the current thermal paste and applying new one, the previous one was tough to remove because it was stone hard, although I didnt remove 100% of it i'd say I took out a good 70-80% of what was there.So when applying it, I hear some ppl say to put as much as the size of a bb just a small dot (this is for my laptop cpu and gpu) which I did, then evenly spread it around with the little spreader it came with. My cpu now gets hotter by 4-5c.
View 5 Replies
View Related
Jan 24, 2012
Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
View 2 Replies
View Related
Mar 8, 2010
Right let me start of with saying it is a zebra ups thermal lp 2844 printer which is connected to the server.it works fine with all the xp machines ( about 15 of them )we have just got in 4 new windows 7 machines, 2 running 32 bit and 2 running 64 bit.i get different error messages between the 32bit and 64bit machines.Let me walk you through, on BOTH machines i go:start > devices and printers > add printer >add network, wireless or Bluetooth device.it then searches, "connecting to ups thermal 2844 on server" windows cannot connect to the printer. cannot create a file when that file already exists. windows cant find a driver for ups thermal 2844 on th network. to locate on manually, click ok. otherwise click cancel and consult your network administrator or the printer manufactorers website.So i then click ok and point to the correct file, which results in the following message: windows cannot locate a suitable printer driver. contact your administrator for help loading and installing a suitable driver. The driver i am trying to use is a new windows 7 driver which i downloaded from zebra.com: ( Driver - Search Results)i have also tried all the drivers we have on our server for these machines and also tried the disk that it comes with.
View 8 Replies
View Related
Mar 4, 2011
Just a quick one (hopefully). The fans in my PC have been making a lot of racket and I was checking them and cleaning them today and trying to pin point which one was kicking up such a racket.During this I removed my CPU heatsink/fan and gave it a clean, but I wondered if I need to reapply thermal paste? I know when changing you're supposed to put it on, but I thought that as I have removed it, but not changed it, the paste won't be as good a contact between the CPU and the heatsink and won't disperse the heat as well (or maybe hardly at all?)Just checked the temp with only Firefox (and background tasks of course) running, and my Q6600 is running at about 45, 45, 45, 58. The final processor is always the hottest and it says the max it has been was 70.I'm loathe to do to much with the PC (gaming and I've got some videos to transfer to DVD, which always pushes one of the processors) if the lack of paste could damage the processor.
View 9 Replies
View Related
Jan 16, 2009
Can anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
View 9 Replies
View Related
Dec 10, 2009
Problem:
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
Shows as
Level: Critical
Source: Kernal-Power
Event ID: 41
Task Category: 63
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
View 2 Replies
View Related
Jan 26, 2012
This has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 1/26/2012 9:21:14 PM
[Code].....
View 7 Replies
View Related
Jan 29, 2012
So I wiped my cpu with cleaning alcohol, dried, wiped it with a very thin layer of thermal paste(silver one), then put everything back together, not the fan wont even spin, but it twitches, and when power runs through pc, I hear a very high pitch noise.
View 2 Replies
View Related
Dec 8, 2011
showing a message " processor thermal trip "
View 1 Replies
View Related
Oct 6, 2011
Just installed Windows 7 fresh on a new intel 320m 160gb. After i type in my password at the login screen windows hangs for about 15 - 20 seconds on welcome with the moving circle. Total boot time is about 40 - 50 seconds. I've checked the event log and an event 100 and event 200 show up at every boot and shut down but it does not tell me what process is causing this. I've tried a clean re install of windows 7 with a non sp1 and an sp1 disk and get the same results. I used windows boot or starup repair and it said something about an audio device? So i unplugged my Asus xonar but im still getting the same hang time on welcome. So far nothing is plugged in the computer except for mouse keyboard monitor and ethernet cable. I'm on a home network with one computer.The setup is gigabyte z68x ud3h b3 G skill 16gb ram or now 8corsair 800ax psui7 2600kgtx560I've installed plenty of windows 7 on many intel ssd's (mainly x25 m) and this is the first time ive seen this slow of a boot time and its especially odd that it gets hung up on the welcome screen. I've tried searching fora
View 1 Replies
View Related
Sep 19, 2012
I have a ASUS Laptop with Intel I3 processer and Windows 7 Home Premium. I recently had a forced shutdown during a Windows upgrade session. Ever since then the Boot and Shutdown times have increased to over 15 minutes. I have run the msconfig unticking all but the antivirus (Kaspersky) and it still takes >15 min to boot and Shutdown. Is there something I can do before I decide to reinstall Windows &. (I dont have a install disk.) The software came with the Computer and I have the OEM code (Bought at Best Buy)
View 1 Replies
View Related
Apr 16, 2012
I have two windows updates that keep failing. When i go to shutdown my computer I always have an update icon attached to the shutdown key. The download is always 1of1. Then when i reboot, the update icon is still there. I'm thinking since the two updates are failing, it has something to do with the 1of1 update not downloading properly. I went to windows update to check for new updates, and the only one is the two that keep failing. My computer just blue screened on shutdown today, winch got me thinking i really need to fix this.
View 3 Replies
View Related
Oct 11, 2010
how do i prevent shutdown process after click on Shutdown button!
View 9 Replies
View Related
Nov 23, 2011
my laptop with window 7 OS does not shutdown when i click on shut down tab.
View 1 Replies
View Related
Jan 26, 2013
i am always getting force shut down message whenever i processed shut down process.
View 2 Replies
View Related
Jun 6, 2011
Im having windows remote, and "shutdown" button has hibernation action, is it possible to somehow change it to real shutdown?
View 1 Replies
View Related
Feb 11, 2012
Im not sure if this is in the right category, but I think it could be Windows 7 related.My Powersupply died the other day so I purchased a new one and all was fine, except when I shutdown it either freezes or carries on for what seems like forever.The only thing is that on bootup my DVD Drive and SSD have changed ports so my dvd drive is now device00 and my SSD001.
View 1 Replies
View Related
Feb 2, 2012
I have a checkpoint VPN service to connect to the office but for some time now the service isn't starting...even after re installing. so I looked for the event log or the user & groups in the "Manage" option from "My Computer" but it's missing.... as if my user on the laptop (I have only one - me) is no longer the administrator.
View 9 Replies
View Related
Jun 5, 2012
I left my PC in the company of someone who might have done some meddling. It is configured to require the password upon re-opening it, but it is my understanding this can be by-passed. And, if true, knowing the time this would have occurred, can I use the Event Viewer to determine what actions might have been performed? Or is there a simpler method?
View 1 Replies
View Related
Mar 28, 2011
ever since I got my new Asus A52J notebook about 3 months ago, it occasionally freezes for everything between 30 seconds and 5 minutes, mostly around 1 or 2minutes. After this happens I find an event with the Event ID 9 in the Event Viewer(The device, DeviceIdeiaStor0, did not respond within the timeout period.). So far this mostly happened when I'm watching a movie(online as well as offline) or playing a game and then mostly in the beginning 1-3 times and after this it was fine for the rest. SO, now I installed Firefox 4 and if I'm running it, I get 10 of these freezes in 30 minutes. Anyway, I downgraded to Firefox 3.6, I found some information about this on some other pages already(The device, DeviceIdeiaStor0, did not respond within the timeout period Solutions Log , Derek Seaman's Blog: Windows 7 Intel SATA/AHCI Lockups and Intel SATA Event ID 9), but nothing helped. By the way, I'm using Windows 7 64 bit Home Premium, the version that was installed on the computer. I attached the reports you ask for in the BSOD posting instructions, even though I'm not having BSOD issues at the moment, might still be some useful information in it.
View 9 Replies
View Related
Sep 2, 2010
"Something" is creating empty files ending in ".event" in my folders - they seem to have the name of the directory.
ie if a folder is called "hello" the file would be "hello.event". Anybody know what this is and how do I get them to stop showing up?
View 5 Replies
View Related
Nov 12, 2010
Windows 7 64 bit. Done complete Norton 360 scan, Malewarebytes scan, scannow from cmd prompt. Checked access rights and all boxes checked. When I try to start Event Log from services I get an error 5?
View 2 Replies
View Related
Sep 10, 2009
Anyone have any idea on what .event files are. I just starting noticing when I create a new file of download something. There are .event files with the same name as the file.
View 9 Replies
View Related
Mar 21, 2011
I've just tried installing SP1 and it's not working with the automatic Windows Update utility. I've gone ahead and taken a look at the event logs and I see that there are at least 100 warning messages like as follows: [code] I've updated the BIOS on my Motherboard, I've ran a memory check (memtest85+) that didn't result in any errors. However I haven't had any luck installing SP1 and after 3 failed attempts.
View 3 Replies
View Related
Nov 15, 2011
I recently checked my event log and theres a huge list of warning, error, and critical events.
View 5 Replies
View Related