I recently upgraded from Vista to 7 Home Premium 64-bit on a month-old machine. The computer has been running 7 for several weeks, and this error just showed up within the last couple of days.
When I go to shutdown or restart, I get a screen that says Waiting for background processes to close. The screen is only up for maybe a second, with no list of what process needs to close. Then Windows shuts down normally.
I went through msconfig and determined that the RAID event monitor is the program causing the hangup. What does this mean? Has anyone else encountered problems with this? Is there any way to fix it other than just disabling the program in msconfig?
I'm having a peculiar problem that just started yesterday out of the blue. Suddenly when I boot up in Windows 7 (64-bit), there's always an open dat file titled "win403700" that greets me on my desktop. It's of no use to me, since it's filled with lines and lines of code that are completely encrypted in notepad.After running CCleaner to clean out my registry and hard drive, followed by over two hours of sytematically uninstalling programs, disabling startup items, and then finally moving on to msconfig items under the services tab, I was able to determine that "Windows Event Log" is what causes this to pop open with each new startup. (I assume everyone has it enabled under msconfig > services.)Would anyone know why it is doing this? If I can just disable it and forget about it I will, but based on what I'm reading here, it appears to be an essential process for updating Windows: Windows Event Log - Process and Service wiki?
OS: Windows 7 Home Premium x64 i7-2600K CPU @ 3.40 Ghz OEM 8Gb RAM Asus P8P67Pro Harware & software build around 6 months old BIOS, Windows updates and Driver updates applied regularly.
A couple of weeks ago i had a BSOD. Since, when trying to boot, most of the time my monitor turns ON, OFF, ON, OFF, etc...for some time, very rarely leading to a successful boot. No problem accessing Recovery options or BIOS.sometimes (very rarely), it does boot up normally.I have tried everything i can think of (with my limited knowledge).
I am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown 2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers) 3. Multiple Chkdsks 4. Checked system, power, performance, battery etc with Vaio Care 5. Tested it unplugged and plugged on battery 6. Toning down my power plan's maximum processor usage, changing system cooling policy 7. Reinstalling service pack 8. Cleaning out registry with CCleaner 9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
It is win 7 with updates. I built it a little over a year ago. It restarts all by itself. The event viewer shows a kernel error and improper shutdown. It may restart once or maybe twice a day or not at all but It happens too often and started a while back. I have checked temp using Sisoft sandra but its not overheated. The only thing unusual to me was the power supply fan seems to kick in twice. Its done that since it was new. It still does it at times but not always. The Power supply is a Fatality 550 w. The amd processor is low watts and so is the video card. I don't like the idea of replacing stuff just to see if it works. I don't know if ram or memory error could cause something like this?
I had to force shut down my new build(2 weeks old ). I hooked up a new monitor,plugged in an Oxygen Keyboard(piano) for the first time and tried to plug the keyboard(typing keybaoard ) into a usb port,which for some reason didn't work and then Windows 7 started searching for drivers and couldn't find whatever driver it was looking for. No, problem until I went to run aida64 and it froze on the opening page,I force quit it in task manager then tried to restart and it froze on"windows is shutting down".After I forced the shutdown by holding down the power button I restarted and everything seems to be cool,aida64 opened up ,programs seem to be responding. here's what the win 7 report said: roblem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional information about the problem: BCCode: 1000009f BCP1: 0000000000000004 BCP2: 0000000000000258 BCP3:FFFFFA8018B84660 BCP4: FFFFF80000B9C3D0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:WindowsMinidump�71412-18610-01.dmp C:UsersGrantAppDataLocalTempWER-28236-0.sysdata.xml Read our privacy statement online: here is the zip of my dump file and system health report Attachment 221419?
What's happening is my system shuts down almost immediately upon power up. Yesterday I could keep hitting the power button and it would intermittently get a little further into the boot sequence, finally getting to the screen where the "Thermal Event" message displayed and gave options to either hit F1 to continue (where it would usually shut down again), or F2, where I would get into the setup, mess around a little without making any changes, then exit out and the system would boot up and run fine until I powered it down.
The issue began after I installed a new SSD and upgraded to Windows 7. I upgraded from a 32 bit version of XP to the 64 bit version of 7.
Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
Can anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed ) Asus P6T SE Motherboard Windows 7 Pro 64 Bit Power Supply Antec 750W Modular PSU CPU Cooler: Zalman CNPS 10X Extreme Samsung DVD burner Seagate 1TB Drive 7200 RPM's RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
This has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...
Log Name: System Source: Microsoft-Windows-DNS-Client Date: 1/26/2012 9:21:14 PM
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
Just installed Windows 7 fresh on a new intel 320m 160gb. After i type in my password at the login screen windows hangs for about 15 - 20 seconds on welcome with the moving circle. Total boot time is about 40 - 50 seconds. I've checked the event log and an event 100 and event 200 show up at every boot and shut down but it does not tell me what process is causing this. I've tried a clean re install of windows 7 with a non sp1 and an sp1 disk and get the same results. I used windows boot or starup repair and it said something about an audio device? So i unplugged my Asus xonar but im still getting the same hang time on welcome. So far nothing is plugged in the computer except for mouse keyboard monitor and ethernet cable. I'm on a home network with one computer.The setup is gigabyte z68x ud3h b3 G skill 16gb ram or now 8corsair 800ax psui7 2600kgtx560I've installed plenty of windows 7 on many intel ssd's (mainly x25 m) and this is the first time ive seen this slow of a boot time and its especially odd that it gets hung up on the welcome screen. I've tried searching fora
I have a ASUS Laptop with Intel I3 processer and Windows 7 Home Premium. I recently had a forced shutdown during a Windows upgrade session. Ever since then the Boot and Shutdown times have increased to over 15 minutes. I have run the msconfig unticking all but the antivirus (Kaspersky) and it still takes >15 min to boot and Shutdown. Is there something I can do before I decide to reinstall Windows &. (I dont have a install disk.) The software came with the Computer and I have the OEM code (Bought at Best Buy)
I have two windows updates that keep failing. When i go to shutdown my computer I always have an update icon attached to the shutdown key. The download is always 1of1. Then when i reboot, the update icon is still there. I'm thinking since the two updates are failing, it has something to do with the 1of1 update not downloading properly. I went to windows update to check for new updates, and the only one is the two that keep failing. My computer just blue screened on shutdown today, winch got me thinking i really need to fix this.
Im not sure if this is in the right category, but I think it could be Windows 7 related.My Powersupply died the other day so I purchased a new one and all was fine, except when I shutdown it either freezes or carries on for what seems like forever.The only thing is that on bootup my DVD Drive and SSD have changed ports so my dvd drive is now device00 and my SSD001.
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
