Setting Up 3 Monitors On Radeon HD5450 Without Adapters?
Jul 24, 2012
I recently bought a Radeon HD5450 graphics card with 1GB of DDR3 memory, it has three outputs: VGA, HDMI and AVI (ATI Radeon).
I have had 2 monitors plugged in for a while using the VGA and HDMI ports as I didn't have a AVI lead. Today I got a lead and hooked up a third monitor, instead of all three working only the AVI and HDMI monitors are working. I went onto the monitor layout and my VGA monitor is shaded out.
In the catalyst control centre that came with the card it says its disabled and to extend onto another monitor has to be disabled. I found this thread [URL] which talks about getting the third monitor running when using an adapter. I want to know can I get this working without a adapter.
View 7 Replies
ADVERTISEMENT
Jul 16, 2012
I have a Radeon 5700 graphics card. I currently have two screens running off DVI ports. My graphics card also has a HDMI and DisplayPort available. I know that my 3rd screen needs to be running from the DP connection to facilitate 3 screens. owever, my screen only has HDMI and VGA inputs. So I bought a cord that went from DP to HDMI so that it could go directly from my tower to my screen without any adaptors. However, It still wont work! Apparently, I need some sort of 'active DisplayPort adaptor'. But my cable output to screen is HDMI. Is there an 'active adaptor' that is DP but goes from HDMI to HDMI? That seems like a very obsure thing to exist.
View 4 Replies
View Related
Aug 17, 2010
I am trying to set up 2 external monitors to my Dell e6410 laptop.
Specs:
Quote: Operating System
MS Windows 7 64-bit
CPU
Intel Core i7 @ 2.67GHz54 �C
Arrandale 32nm Technology
RAM
4.0GB
[code]....
IDT High Definition Audio CODEC I have my laptop in a docking station that has 2 DVI-D Male/Male connections. I have a DVI-D cable running from each to an LG monitor. When I go to the display settings, I can get one of the monitors to extend out from my laptop, but I cant get it to go to the third one.
View 7 Replies
View Related
Jan 7, 2010
I've installed Windows 7 yesterday and only one of my card seems to be working as it is the only one who displays something.
The weird thing is that when I plug a monitor in the DVI port in the other card, I hear that DING song that signals that hardware has been connected but nothing shows up.
Any ideas what could possibly be the problem?
Obviously, the three monitors were working under Vista.
View 9 Replies
View Related
Nov 1, 2009
Ok, so I just added Windows 7 to my lineup. After an epic battle with permission problems between XP and 7, I finally managed to fix it and have moved on to a slightly more odd yet annoying problem- my dual monitors.
The way I used to have my monitors set up was my monitor on the right had my task bar and icons... but the monitor on my left was the main monitor. That way when a program opened it would open on my left monitor (which is right in front of me) while still allowing me complete access to everything under my taskbar and all my icons to my right.
Is there any way to do that in Windows 7? When I select "Make this my main display" it moves the task bar over to that monitor, which is annoying. Any suggestions?
Note: for those of you curious on how to do this in XP or Vista- pick the monitor you want to be your main monitor (the one programs open on) and pick the one you want to have your taskbar. Let's use my setup- main monitor on the left/Task bar and stuffs on the right).
- Go to display, right click on the right monitor and uncheck "attached". This will turn it off. Now all you have is the left monitor with taskbar and stuff all over it.
- Right click the right monitor again. Check "attached" AND "Primary". Click apply. Right monitor turns back on. Everything refreshes and task bar is on the right monitor.
- Right click left monitor and click "Primary". Task bar + icons are still on the right monitor, but now all programs open on the left one.
View 1 Replies
View Related
Feb 26, 2012
I have done this before for myself without any problems and while bragging to my friend I was roped into setting up his computer with a third monitor. As the system is not mine I am trying to keep costs low and avoid buying anything. In short. I am trying to run three monitors, 2 through a ATI4600 series and 1 through an el-cheapo ATI Radeon 9250 256MB, however when both cards a plugged into the mobo the second (el-cheapo) will not run displaying a cannot start message.
View 2 Replies
View Related
Jun 24, 2011
I recently uninstalled all of my wireless network devices, these were a simple Wireless Card which was in a PCI slot and a wireless USB adapter, I uninstalled them from the device manager, and now under "Network Devices" I have about 32 'Microsoft 6to4 adapters' all with the yellow triangle on them, and then also there are 2 Microsoft ISATAP adapters, again with the yellow triangles. also, when I click on them, they say "This device cannot be started (error code:10)"And also now, my fast ethernet port has a yellow triangle on it too, but windows cannot find a driver.
View 1 Replies
View Related
Sep 8, 2012
i bought i3 2120, Foxconn H61MX motherboard, 4 GB ram, and ATI HD5450 Graphics card with 450 Watt PSU. SO please tell me can i play my dream game Bf3 with it.
View 5 Replies
View Related
Aug 22, 2011
Update driver of Ati HD5450?
View 1 Replies
View Related
Jan 5, 2010
1. Is there a way i can make a single wallpaper be stretched across both monitors (not just the image twice)
2. Is there a way to stretch the taskbar across both displays?
View 9 Replies
View Related
Dec 31, 2011
All my adapters in my Dell Inspiron 1440 (Win 7 HP x64) in the Device Manager are seemingly not connected or malfunctioning...It happened right after I restarted my computer and all of them quit out at once.
View 9 Replies
View Related
Oct 18, 2009
I have main display adapter from mainboard ( Biostar GF8100 M2 TE GeForce 8100 Socket AM2 ) and I buyed new GeForce 8500GT video card. Can I connect to computer 2 monitors using 2 different graphics card (1 main card and card I buyed ) ?
View 5 Replies
View Related
Jan 19, 2012
I've got a user that has a laptop with two external HP monitors. One monitor is connected via VGA connection to the laptop - the other is using an HP Display Link adapter over VGA and/or DVI. The screen that is connected to the Display Link adapter keeps stalling. He will move Internet Explorer over to that screen, try to maximize the window, and it freezes, but if he moves another window, like Windows Explorer over to that screen on top of it then Internet Explorer will start to respond.
Things I've tried: updating drivers on the integrated graphics, updating drivers on display link adapter, replacing display link adapter, changing usb ports, changing refresh rates on the monitors, and alternating between DVI and VGA connection on the Display Link adapter. Oh, and also disabling Windows Aero.
View 3 Replies
View Related
Nov 6, 2009
Prior to purchasing a Vista Ultimate to Windows 7 Ultimate upgrade for $220, I downloaded and ran the compatibility/upgrade adviser program and found no problems.While running the Windows 7 Install disk, the installation stopped dead with the message that I must update the driver for my Adaptec 29160N SCSI hard disk storage controller. However it could not find a newer driver than the one I am currently using under Vista, version 6.5.645.100, dated 1/31/2007.
View 4 Replies
View Related
Jul 21, 2011
At the moment I'm using Netgear AV200 powerline adapters and need to add 2 more adapters to my setup.Do I have to stick with Netgear or can I use another brand if they are both compliant with HomePlug AV1 standard and the same speed (200Mbps)Edit: Well apparently all powerline adapters are compatible as long as they are the same type (i.e. Homeplug AV or DS2), so I'll be getting more affordable pair of adapters...
View 1 Replies
View Related
Jul 26, 2009
Just be careful if you want to use X-64 version of Windows 7 and are connected via a WIRED LAN connection.
A lot of laptops use the VIA VELOCITY gigabit ethernet adapters. These are mainly 32 bit and WON'T WORK on x-64 (including x-64 VISTA)
VIA Velocity Gigabit Ethernet Controllers - VIA Technologies, Inc.
Wireless usually works and you can use a PCI express adapter or a usb==>lan adapter in these cases.
If you have a Networking card similar to those listed in the Via velocity link then don't even THINK about trying to find 64 bit drivers for these.
View 4 Replies
View Related
Aug 6, 2009
Can someone tell me if its possible to use different Power Line adapters of different makes or do they all need to be the same make??
View 1 Replies
View Related
Nov 2, 2009
Which wireless ''N' usb adapters are compatible with Windows 7 64-bit. The linksys WUSB600N ver. 1 will not connect any faster than 54mbs.
View 1 Replies
View Related
Dec 30, 2009
We have just purchased a new computer with Windows 7 at our office and we were told there weren't any wireless network adapters that were compatible yet for 7. All of the other computers are Windows Vista and they have Ativa Wireless Network Adapters that work fine. It will not work with this new computer. Any suggestions of how to get up and running on the Internet?
View 5 Replies
View Related
Jul 27, 2011
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box.
When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 3 Replies
View Related
Feb 12, 2013
I have a MEDION MD96850 Laptop. Ever since the battery died, I have been running the laptop on AC power. This has been fine for my work. However, since yesterday, the laptop just won't turn on. The power supply is on but the laptop won't start. I have tried 3 power adapters but it's the same result.
One of my hinges is damaged and I can see a wire inside - maybe this is the cause of the problem? I read that on some laptops there's some switch underneath the touchpad that does something but I don't have a clue.
Due to my stupidity, I delayed in backing up much of my work and now find myself desperate to access it again. I really don't want to lose all the work.
View 11 Replies
View Related
Dec 27, 2010
My problem is that i bought some 1gb belkin powerline adapters to give me a better connection in my house than my wireless previously did. However i plugged them in and boom "Unidentified Network - No internet access".Now at first i thought it was because i had them plugging in through and extension lead downstairs so i removed all than and plugged them straight into the wall. This didnt help at all.I read some forums about turning of IPV6 cos apparently.
View 9 Replies
View Related
Aug 10, 2012
I have a few extra Microsoft ISATAP adapters when i do an ipconfig/all.Can I delete some or all of them and furthermore what is their purpose(s)?
View 2 Replies
View Related
Aug 18, 2012
I have several VPNs and Virtualizing software installed, and they have this virtual network adapters in the network and sharing centre. In the "connect to a network menu", one shows working internet connection, while the other one shows no internet access, How do I get rid of those entries? I dont mind messing with the registry or the system files.
View 2 Replies
View Related
Apr 22, 2010
Whenever I boot up or disable/enable a network adapter it takes 1-3 minutes before I actually connect. After waiting, I'll see the little round circle spinning in the system tray and then i'm able to connect.While waiting for my adapter to work I noticed under tcp/ip settings that my gateway field is blank. If I put it in and go back, it's still blank. When the adapter finally connects it then shows up in the gateway field.Tried uninstalling AV, different drivers for LAN and wireless and reloading OS.
View 7 Replies
View Related
Nov 24, 2012
miniport network adaptor
View 2 Replies
View Related
Dec 19, 2012
I just got a new laptop with windows 8 is there anything out-there that will let my serria wireless adapter work?
View 4 Replies
View Related
Feb 18, 2013
where and how do I get drivers and network adapters for hpg6 without installing into my friends computer
View 1 Replies
View Related
Dec 27, 2011
I have this device "WAN Miniport (IKEv2)" under Network Adapters and it's always listed as not working. I disabled it a long time ago but it always comes up as an error when I scan my computer. It won't update the driver, Windows always says that there was an error, and as far as I can see it doesn't do anything but it won't let me remove it even though it isn't working.
View 8 Replies
View Related
Dec 20, 2010
Win7 64 bit reports a problem with the driver for Microsoft ISATAP Adapter and Toredo Tunneling Adapter. Troubleshooting does not automatically fix it and reports that the drivers are OK. I have seen several other reports of this problem but not yet found a cause or fix
View 6 Replies
View Related
Mar 30, 2012
Upgraded to windows 7 ultimate 64bit from vista ultimate 64 bit. That didnt fix it. I'm desparate. I've tried everything I can find. It has a realtek 8169 nic on board sabertooth x85. I tried USB adapter and where it normally loads it just says it's installed but shows up in device manager. Like thw tealtek nic with yellow triangle on it. If I try an update driver it returns "parameter is incorrect" message. Its not connected and the is no IP using ipconfig. I Lost all my software CDs and emails with serials etc in a house fire last year.
View 6 Replies
View Related