We are deploying 10 Toughbook H1's for doing electronic patient care reporting and interfacing with our dispatch center. They are running Windows 7 Professional and will have mobile broadband connections. We'd like to have them setup essentially the same, with all the same settings and restrictions. What is the best and fastest way to do this? I've used the local group policy editor but haven't been able to figure out how to copy those settings from one computer to another. Each computer will have a standard user account. We'd like to prevent the installation of programs (except by admins) and changing of most settings. We're also going to attempt to restrict most internet access except for approved sites.
Three Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
I've been having this trouble on my laptop where the power setting just changes at will. I usually put it at power saving when i use it to write but it just takes 10-20 seconds before it by itself changes to High performance.
I wish to install an SSD and put windows 7 64 bit on it. I don't have a cd/dvd copy of windows just the one on the recovery partition of my Dell Inspiron 580 1TB HD 8GB RAM.Firstly is there more than one cable to connect from the SSD to the motherboard or two like normal HD's?Secondly having fitted the SSD do I then boot up normally from my old HD and then somehow reinstall windows but selecting the SSD>?
Every time I create a new window, if I happen to already have a window from that same program open, I have to move it back up and left to set it in the top corner of the monitor.Windows off-sets new program interfaces down and to the right. And I move it back up and left.In todays world of multi-tabs and stacking task bars to group like programs, with selectable pop-up previews of programs from the task bar, why on earth do we still have to deal with the extremely irritating mode of "new windows must offset else the user will have no idea where his old window is" mentality.
I'm Have a custom tower atm that i built. it has windows XP installed by an update disc. Due to my computers age im building a newer computer running a Phenom II X2. The problem is I'm not sure how the OS's work, haven't messed with them sense XP. I want to install Windows 7 on the new computer in 64-bit.
however I also want to install it on the older one in 32-bit, is there a disc that has both or do i have to buy one or the other. and is using the windows 7 disc on 2 different computers that belong to me against the terms of use?
i have 1 laptop with 7620 and the desktop with RTM, the issue is taht when i do
computerc$
i get the prompt saying taht i need to enter a user and password when i could do it before without entering it.
in XP having both accounts with the same name and password and some register magic solved the problem, but Windows 7 is different many aspects so i need help.
i can bypass this error by sharing all my drives but... i dont want to left my laptop with the legs open, or well turning on and off the sharing option.
the homegroup is working, though only shares what it want and i will not mess with it (too many files in both hardrives to having access to one zone of the partition).
My stepbrothers and I have been playing some games over our LAN lately. Two of us (including myself) are connected from laptops wirelessly, and the other is connected on a wired desktop. The game we had been playing is Call of Duty, patch version 1.5. All we had been doing before was one of us would create a server, and it would show up in the LAN list for the other two of us.
No set up needed, just installed and played. However, this evening we went to play again and no servers show up for the LAN. It doesn't matter who makes the server, no one else can see it. If I try to ping any other computer on the network, I get no response. If I go to the network devices, nothing shows up. However, if I go into my router I can see all devices, wired and wireless.
They just won't show up under the Windows network devices. I am running Windows 7, and the other laptop and desktop are running XP. We have made no changes to any of the systems. LAN servers just stopped showing up.
I have homegroup set up on my windows 7 (I think). I can see all my windows XP computers, but they can't see me. How do I configure my network in windows 7. The network wizard was so simple in windows XP, but I haven't been able to get it right in Vista or Windows 7.
I want to setup my IP Camera, and of course I need to do it via ethernet cable. So, when I put the IP address e.g. "192.168.1.102" in a browser (tried with IE9, Chrome and Firefox) , my Laptop doesn't even load or kept loading.This happens when I'm using Win 7 Home Basic, but with a Win XP laptop works great.
Does anyone know of a piece of software for use with Windows 7 that will allow one to create a new profile to return the computer to original configuration and then recover programs, files and desktop setting? My computer has slowed down a little and I believe it is time to restore it to original configuration and reinstall everything; however, I don't want to spend a week reinstalling software and setting up the desktop and all my program settings.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD A4-3420 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0 Processor Count: 2 RAM: 3570 Mb Graphics Card: AMD Radeon HD 6410D Graphics, 512 Mb Hard Drives: C: Total - 936682 MB, Free - 884422 MB; D: Total - 17083 MB, Free - 2133 MB; Motherboard: PEGATRON CORPORATION, 2ACF Antivirus: Kaspersky Internet Security, Updated and Enabled
When using Word to print return mailing labels on Avery 8167 sheets, the font cannot be reduced to fit the label.
I'm a new Windows 7 user. I have a Coby 1GB mp3 player that I've been using as a thumb drive for years since the buttons on it broke off. I've put all kinds of files on it from documents to picture files. Yesterday I brought home my new netbook running Windows 7 Starter.. I took the mp3 player and plugged it in the USB port. Windows 7 recognized it with no problem.. but to my surprise, it doesn't show the files on it. So I tried to put files on it.. and it doesn't seem to allow anything but music files (MP3's) to be put on it. It's very odd because my Windows XP desktop computer allowed me to use it as a basic thumb drive and it accepted all types of files to be put on it.. not just MP3s.Is there a setting on Windows 7 that would allow me to use the MP3 player like a regular USB flash drive as I did on my XP system?
i was havin probs with my pc DELL isnpiron 17R ,,it was about missing of some storage drivers ,, i contacted a dell agent ; after he viewed the device manger and trying to reinstall them he couldn't and he told me that i've ghost or something in my registery and i need to do a restore to factory settings..i tried to shut down pc and turn it on again then i pushed the F8 button and i choosed " Repair Your Computer " and then i got " windows loading files " ,, stuck on it ,,,i tried to restart the pc and do it again but nothing i tried to remove battery and placed it again and retry but nothing i stucked on the same page.i used registry boost program on this site ,, after scan ,, i had a high damaged registery.
I need to know how to set up the sidebar (on left side) where the folders are located.Does this version not save emails that I send or must I BCC each email? I can't find where deleted emails go? Is there no trashcan for deleted emails?
I am trying to set up 2 external monitors to my Dell e6410 laptop.
Specs:
Quote: Operating System MS Windows 7 64-bit CPU Intel Core i7 @ 2.67GHz54 �C Arrandale 32nm Technology RAM 4.0GB
[code]....
IDT High Definition Audio CODEC I have my laptop in a docking station that has 2 DVI-D Male/Male connections. I have a DVI-D cable running from each to an LG monitor. When I go to the display settings, I can get one of the monitors to extend out from my laptop, but I cant get it to go to the third one.
My brother set his max cpu rate to 30% in power options. He says it saves power on his notebook and the batteries last longer. I told him thats a bad idea. But he dont listen to me.
I've customized my power setting so that the monitor is set to turn off after 25 min of inactivity. It was working for a several days but just last week, I noticed that my monitor was not turning off as expected. When I looked in the power setting, the "Turn off the display" was set to NEVER.
I changed it back to 25 min; it worked for a few days....but somehow it keeps reverting back to the NEVER. I should add that I have all the OS updates installed and I am the only user on this computer.
I'm going to be out of town and using a remote control access program to use my computer. I'm wondering if there's a way to set my computer's power settings to turn on automatically every now and then since I won't have direct access to the physical computer to turn it back on, in case it crashes, or the power goes out. I only see settings to auto-shutdown or sleep the computer at certain times, no turn on options.
I have 10,000 pictures in a couple of hundred folders so I'm trying to Re-set all folders and files to details or large or whatever and I forgot how to do it because it has been a long time since
I am trying to use the free program FreeFileSync to do a nightly back up of some files and have had some trouble setting up the job. The syntax for the job would be "FreeFileSync myjob.batch" run from the utilities location.I set the trigger to 2am each day, with the action to start the program from its location with the batch job file which is located in the same folder being the argument. Under conditions tab I set it so that it will wake the computer up to run the task and set it so that if another instance is running it will run in parallel in the settings tab. With that, the task did not run?
I am planning to buy a 5.1 speakers but this is my situation.I have my pc setupped to my 107cm LG TV via hdmi cable ..sound is comming from the tv (ofc) i was thinking now about those 5.1 speakers..but also will they work on my configuration?
It was working great and I noticed that it would not recognize an external drive I was going to install some progs from, even though I can go in to Admin Tools and see it there, and then I tried taking it online and it says Windows Explorer not responding all the time, so I think the best bet at this point is to restore it back to out of the box condition.I just started tweaking on it, so it's not like I'll be losing much work.
I got my new drive. I'm about to set it up. Run some HDTune to check it. then load of Win 7 on my new speedy HD.
I had a question. I'm going to be dual booting with Vista on my current seagate 500.. and I'll be loading 7 to my new WD Black 640GB. So I understand I get it all installed. Restart the PC. then from here what do I do to make sure it writes to the NEW drive, and doesn't reformat the old.. I'd hate for that to happen.
I don't need to unplug my old 500GB or anything drastic right. I can simply just enter the BIOS. Change the boot order for it to load from CD.. and then I get to choose what drive to install 2.. and that will be the one I choose. right?? the 640GB. or would I need to set the 640GB for Master. and then reboot with CD in..
Also my new drive didn't come with a master/slave pin. so should I unplug my old HD when getting ready to install so I don't copy over it. or no?
I've basically never installed 2 OS's on the same computer before so just asking some of these basic questions.
I have 2 computers. One I was using as windows media center. I have it set with a Ceton Infinity tuner card. This one has Windows 7 pro 64 bit. The other one was just setting doing mostly nothing. It has windows Vista ultimate 64 bit. I thought that could make this one as a extender but I am having trouble setting it up. I believe that I have both computer setup to share all files. I can go to no 2 and add libraries that on no 1 but nothing shows up on no 2. I am about ready to throw a computer and the other equipment I bought for in the trash. Just about any thing I do screws up. Every can that I guess Can not spell or write in good English.
I've tried to set up a Wi-Fi connection to use for Nintendo DS/3DS, but nothing seems to work. I don't have a wireless internet connection, so I bought the Nintendo Wi-Fi USB Connector, but that does not work with Windows 7... I've also tried another Wi-Fi USB device, but that doesn't seem to work either. I guess I should get a wireless router that allows Wi-Fi connection, but which would actually work for Nintendo DS/3DS?
If you can't change the settings in homegroup e.g to stop document sharing, or you can't enable printer sharing then make sure your Windows Firewall is on.
I've been using a default setup of an Internet Security product with it's own filewall, but Windows woul not allow me to share a printer or change what I wanted to share.
Error message: "Printer settings could nor be saved. Opperation could not be completed (error 0x0000006d9)"
I have a laptop with a company that uses a domain server.There are no local accounts on the company laptops, but you can still log in using previous credentiails.My problem:When I log in without the domain present (Example: Network cable unplugged) to get on the company wireless or VPN from home, the %USERNAME% variable is set to upper case.This wouldn't be a huge issue, except that some programs/scripts rely on the username variable being lowercase.My question: Is there a way to force the username lowercase, when logging in to a system without the domain present?
i have setup my home pc (windows xp sp3) that is on all the time to allow incoming connections and the ports through firewalls.now this is where im confused. im using a windows 7 laptopand i want to use the xp internet recourses hence the vpn.i login and it accepts my credentials but then gets stuck right after saying lost the connection.i have a domain from comcastbut like i said im in new territory here and not sure what to put in for the vpn
So this is my home pc that I run a private network on with my brothers computer and mine. No idea now after a ran a tweak program I have public and private setup.
How do I just keep the private setting on rather then the public trash to? Also My jump drives no longer work on my computer but work on his.