SP1 Fails To Install - Code 80004005?
Feb 22, 2011
I recently built the computer that I am on and installed Windows 7 Ultimate 64-bit in December.Everything's been working great and no updates have had issues installing until SP1 came out today. It fails every time with error code 80004005, unknown error. I am fairly certain that it is due to the Windows Mail hack, but any attempt to restore the files back to the original versions (I've tried copying them from another machine and sfc /scannow) have not resolved the issue.On another note, I've read that the same error came up when people did service pack installs for Vista. I have attempted many of the "best practice" fixes for these cases - disabling services, antivirus, startup entries, etc., but this has not resolved the issue, either.
View 9 Replies
ADVERTISEMENT
May 7, 2012
I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies
View Related
Jan 19, 2009
Clean installing Windows 7 x86 is no problem. But
1) upgrading Vista x86 to Windows 7 x86 fails and automatically rolls back to Vista, and
2) attempt to clean install Windows 7 x64 results in BSOD when rebooting to finalize the process.
Any suggestion would be appreciated.
View 3 Replies
View Related
Jul 10, 2009
Ok, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.
My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.
View 0 Replies
View Related
Dec 4, 2009
My Windows Updates fails Error Code :WindowsUpdate_80070652
Definition Update for Windows Defender - KB915597 (Definition 1.71.471.0)
Any thoughts ??
View 5 Replies
View Related
Mar 12, 2011
bug Microsoft about the installation problems with Windows 7 SP1? I'm trying to update my 32-bit laptop, and have been unable to ever since the SP was released because it always gives me the 80004005 error, which to my understanding is a very vague error. Searching on various forums, I have noticed that this is a relatively common problem, but I haven't seen much response from Microsoft. There are a number of suggested solutions (including turning off security software, running the Windows Update troubleshooter, running something called the System Update Readiness Tool from Microsoft--nothing works. considering that Microsoft essentially has released a fix that needs to be fixed. Sounds almost like the whole Phone 7 update debacle.
View 13 Replies
View Related
Jan 31, 2011
7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
View 3 Replies
View Related
Oct 27, 2009
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
View 9 Replies
View Related
Sep 1, 2012
I have a lop top with Windows 7 64 bit OS. Of lately, Windows update keeps failing to install some software updates. Here are the details of the s/w that would not install[CODE]
View 2 Replies
View Related
Apr 6, 2012
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies
View Related
Jul 5, 2012
I have an OLD computer with a 2.4 GHz processor and 1 GB ram, running XP 32 bit. I wanted to upgrade to Windows 7, So I tried to install 32 bit windows 7, knowing my computer couldn't handle 64 bit. However, at the end, it simply told me "Installation Failed" and reverted to XP, with all my files. I tried multiple times, then I tried installing 64 bit windows 7, and surprisingly, it worked. However, it is laggy beyond belief, so I tried installing 32 bit again. Again the installation failed. Now I'm thinking of reverting BACK to XP.
View 1 Replies
View Related
Feb 26, 2011
I recently built the computer that I am on and installed Windows 7 Ultimate 64-bit Everything's been working great and no updates have had issues installing until SP1 came out today. It fails every time with error code 80004005, unknown error. I am fairly certain that it is due to the Windows Mail hack. Unfortunately, I've already tried running the System Update Readiness Tool as well. As for trying the service pack install again, I have tried it multiple times, both through Windows Update and the full installation package downloaded from microsoft.com.
View 16 Replies
View Related
Sep 29, 2012
excess ie9 crashes prompted me to attempt a fix, i uninstalled ie9, updated the ie8 that was left after a restart, had the ie9 downloaded, after updating ie8 fully, tried to reinstall ie9, but installation aborted with Troubleshoot problems when you cannot install Internet Explorer 9 as my only recourse. i tried the fixit wizard, which just deleted adobe flash, but gave the same error message, and on rerunning it, said there were no errors to fix, so now i'm using firefox, ie8?
View 1 Replies
View Related
Sep 3, 2011
Running Vista Home Premium X64 and trying to install Windows 7 Home Premium X64. The install fails the installer's compatibility test with the message "The following issues are preventing Windows from upgrading.Cancel the upgrade, complete each task, and then restart the upgrade to continue. For these items, make the following changes:Uninstall these programs. Open Control Panel and search for "uninstall a program". Trend Micro Internet Security 2008 ".However, Trend Micro Internet Security was uninstalled from this computer at least a year ago and I can find no evidence of any shreds of it being present - not in the programs list, not in the file system and not in the registry.
View 8 Replies
View Related
Mar 14, 2011
Tried pretty much everything apart from a format, which is looking like a good option.The readiness tool produces the following error and no fix ont he net has resolved this issue so far. Renaming Software Distribution folder - NopeMicrosoft Fix it - NopeRe registering windows dll files - NopeNothing works same old thing and this is a the ISO off the website / WSUS update or a exe file. Windows 7 32bit Prof[CODE]
View 9 Replies
View Related
Jun 13, 2011
I did a full back up using Acronus and ever since I have had problems. I tried reinstalling win 7, but this is what I get:"The computer restarted inexpectedly or encountered an expected error. Windows installtion cannot proceed. Click "OK" to restart the computer, and then restart the installation"I have done this repeatedly. I must add that I had a local TigerDirect store run full diagnostics and they say all my hardware is fine?
View 2 Replies
View Related
Apr 16, 2012
i have a hp pc with vista 64 ultimate. It crashed I believe from malware. The recovery disk suggested this was not the same pc and I'm a crook. I did change hd and a long time ago the MB due to video failure, but I've used recovery since then a couple times. This time I did disconnect the MB battery. HP support was glad to sell me a new one since my $2000 duo core 2 was obsolete. Funny you still can get duo core 2's. With much regret I bought a win 7 os and Wow the pc does work with no real issues. On the outside chance it fails after I activate and I can someway prove this, can win 7 be installed in new pc?
View 4 Replies
View Related
Feb 1, 2013
I've searched forum threads & online info extensively and tried everything I could think of before posting, but haven't been able to solve this issue. I recently did a new build, including:
MB: ASRock N68-VS3 UCC
CPU: AMD Phenom II 965e black edition
graphics: Radeon HD 4850
RAM: 2x4Gb Crucial (Micron) DDR3 1333Mhz
Power supply: Seasonic SS500-HT (500 watts)
Case: Antec P180B
Drives: Samsung SP1614
Seagate ST3160023AS, both 160Gb
I installed Win7 ultimate x64. Installation was smooth, and everything worked, but was much more sluggish than I expected. Running a diagnostic, I found the CPU was running at 800 Mhz rather than 3400 Mhz.This was the first time I'd done a build, so I'd missed that the ASRock board supports the Phenom II line, but didn't have enough power for this CPU.So I swapped out the motherboard and installed an MSI 760GM-P34(FX).When I did the Win7 install, it proceeded through all steps to part way through the final "completing installation." It does a successful restart, and completes "Setup is updating registry settings" and "Starting services." It then does another restart.The windows splash screen comes up, but instead of starting up it goes to a black screen for a minute or so, then restarts, shows the splash screen, goes to black screen, etc. After trying a number of fixes, I posted on the MSI forum. A moderator there told me that even though the MSI web site says the board supports 125 watt CPUs, he has found that under load it would cause instability issues for a 125 watt CPU.So once again I swapped out the board and now have an Asus M5a97 R2.0, which supplies 140 watts, which should be enough for my 125 watt CPU.When I did the install, exactly the same sequence followed, the black screen at the same point in the install.Here's the kicker: in order to get more information, I tried an install with an old XP disk I had around. It installed with no issues, and has been running a variety of tasks including gaming for a week now.Everything looks good in the bios: 4 cores running, 3400Mhz, temps low, voltages from power supply look ok, memory & drives are present.
Here's what I've done:
--run Windows disk repair utility from install disk. It says Windows has booted properly.
--boot into Safe mode. It says installation is not complete, and I have to restart normally.
--remove second hard drive.
--remove second stick of ram, try booting on each individually.
--run Memtest 86 v.3.5b: 2 passes on each stick of ram individually, then with both installed. It found no errors.
--run Windows memory diagnostic, which also found no errors.
--change sata mode from AHCI to IDE
--installed XP on each hard drive without issues.
--download a fresh copy of Windows 7 x64 from Digital River, burn & install. Exact same problem.
--turn off everything in bios, including all usb, power management, lan controller, etc.
--flash bios with most recent update
--clear cmos
View 10 Replies
View Related
Jun 22, 2012
Version 14 uninstalled, Version 15 started installing at approx a 88% an RP desktop icon (a box with a bow..a free RP gift !!) appeared, then at 92% everything just stopped, the Icon disappeared....nothing !!Attempted reinstall from real.com numerous times with exactly the same affect !Carried out RP Instuctions to set User Accounts to ONCarried out RPinstructions C/Progs/Real file delete, still no uccessDid a Windows "Fix It" to rectify fault....no successTemp files removed.....still no go.Upon every download a new Real File appears in C/Progs......I removed the previous prior to each fresh download
View 9 Replies
View Related
Jun 10, 2011
I have put together a new computer and went to install windows. Boot off the cd, everything is fine. New drive (64gb SSD for the OS) so the partitions are the 100mb windows boot partition and the remaining space for the OS, everything is fine. It starts copying and expanding files, everything is fine. Then i get to "Windows needs to restart to complete the install", ok, no problem, computer shuts down and restarts."Windows did not shut down successfully.... I select Start normally.tarting windows, pretty logo,Setup recovered from an unexpected shutdown select on option"... Safe mode, command prompt, "Setup is starting servuices"Then "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click OK to restart the computer and then restart the installation."
View 10 Replies
View Related
Aug 30, 2012
I am having difficulties with updating Windows 7 on my laptop MSI FX603. Windows 7 came loaded with the laptop, though I do not know if I have windows 7 basic, premium, pro or else.I went on vacations in July, came back in August and I had a bunch of updates. I updated everything at once but I have 8 update files that fail to install from which only 1 error fail to update occur in the update history; therefore I assume this particular error prevents other updates to install correctly.
Update for Windows 7 for x64 based systems (KB2732500)
installation date: 8/29/2012
You may need to restart your computer for this update to take effect.
Installation status: Failed
Error details: code 80071A90
Update type: Recommended
The knowledge base has several links, I tried all of them. 1 of these knowledge base is about downloading a windows 7 little program called "fixit" but after several attempts, I concluded Fixit cannot solve my issue or is not the proper way to solve my issue.The whole updating package files is roughly around 39 megs and I wonder if Windows 7 actually download the packages every time I click on Update or if Windows stores the updates ready to be installed somewhere on my HDD in which case I would need to re-download the update but I do not know how?
View 5 Replies
View Related
Oct 27, 2012
I am installing Windows on my new SSD. I made the disk GPT (instead of MBR), and installed Windows (tried 5 times now) with similar results. Either error 0xc0000225 or boot loop of "Windows is loading files" ... or it throws me back to my BIOS Boot selection screen where I came from ... what might be the problem? Windows 7 still cant handle GPT partitions? Or it doesnt like the new SSD? I managed to install and reboot successfully once by removing all other drives (except the SSD which I am installing into), works, I can enter Windows. Then once I installed back the other HDDs, it fails again ...
View 4 Replies
View Related
Jan 13, 2013
I was just installing windows 7 from bootable USB when I noticed the "copying windows files" only lasts for about 2 seconds (jumping from 0 to 100% in the process) before continuing to the next step. The whole setup process actually finishes without a problem. But the result is only about 5GB of usage of the hard drive and no creation of the 100MB system partition. I thought it might be the new SSD I'm installing it to so I tried installing on another hard drive, didn't work either.
View 4 Replies
View Related
Mar 17, 2010
I'm having problems installing Windows 7 on my new PC. I just build the computer using these parts... Not sure if that matters, but there it is. I have set up the two 500GB HDDs in a RAID-0 (the install can see the drive, so I do not think that is the problem). I purchased an upgrade version on Windows 7 Professional 64 bit through a cheaper-than-dirt college program (only $30. And yes, it is legitimate.) This gave me an ISO image which I burned to a DVD.
I am trying to do a clean install of Windows 7 as the first and only OS on my new system. For whatever reason, when I try to do the install, I get a 80070570 error and the install fails (at around 5% into the "Expanding WindowsFiles" stage). I assumed, with the aid of some other forum topics, that this was likely due to a bad DVD burn... so I made a bootable Flash drive and tried that... same thing.
View 3 Replies
View Related
Jul 20, 2011
Last week both my hard drives failed and after buying a new one I reinstalled Windows 7 Home Premium. When I tried to reinstall/set up Windows Media Center the set up got to the point where it was scanning my TV signals for channels and was about 1/3 to 1/2 through when the computer killed itself and rebooted. This happened 3 times at about the same place. Why is this happening and how do I get the set up to complete? I had it working just fine before on my old hard drive but I can't now.. I am now using Total Media 3.5 which works but not as well as Media Center so I would really like to get the set up to complete...
View 2 Replies
View Related
Nov 27, 2009
I have just bought 7 Profession 64-bit and upgrade from my Vista Home Prem install. Everytime i install graphics drivers it fails on re-boot.
As far as i can see the drivers install fine (newest ones on nvidia site 195.55 and 186.whatever) then i restart, it loads the "starting windows" page, goes through that fine, but when it tries to go on it just crashes forcing me to use system restore to remove the nvidia drivers so i can run it again.
View 9 Replies
View Related
Jun 19, 2012
Any attempt to download and install this tool results in " This file does not have a program associated with it for performing this action. Please install a program or, if one is installed, create an association in the Default Programs control panel."
I do not get this error with any other program I attempt to run, or download and install. I need to create a bootable usb drive or dvd to do a upgrade repair of my 7 installation. My original windows 7 DVD does not contain SP1. I have downloaded the SP1 iso and just need this too to work.
View 6 Replies
View Related
Nov 22, 2009
I have downloaded windows 7 home premium upgrade ISO from the microsoft store. The burned the iso to disk using the image burner in windows.
My problem is that the disk will boot, and a "windows is loading" screen appears which only takes a minute. Then a windows background appears on screen with a cursor. That is all. No setup at all. What might be wrong here. I would like to make a bootable disk that works.
I can run setup from an OS, but that is not what I want to be able to do.
View 9 Replies
View Related
Jul 16, 2009
I can't install Windows Live. The installer keeps rolling everything back after 99% of the process. For the first time it failed it only installed MSN and Mail and the rest was rolled back. Since then it doesn't download the installation files any more as the old ones are stored somewhere on the disk and it uses them for the installation. Guess the problem occurs because the installation files are corrupted but how do I force the installer to download the again? Looked everywhere and can't find the place where the old installation files are stored...
Just in case, the error i'm getting after the roll back is:
'try installing win live programs again. progs were not installed because the installation was cancelled. aborted: 0x80004004'
View 8 Replies
View Related
Dec 24, 2011
I want to hook up a MIDI keyboard to my computer so I can take computer-based playing lessons.
I'm running Windows 7 Home Premium, 64-bit. I have a generic MIDI-USB cable. I plug it in, Windows recognizes it, and installs a driver. I plug the MIDI In cable into the Out socket of a Yamaha PSR260 keyboard, and Out into In, and power on the keyboard. On the MIDI-USB cable, the red power light is on, and the In LED is flashing. So far, so good, but now I'm having troubles.
I think that I need to install a Yamaha MIDI driver in order for Windows to recognize my device. I downloaded the UM312x64 package, but when I run setup.exe, it gives me "Error 25001. No device is connected."
View 2 Replies
View Related
Sep 2, 2011
1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
View 1 Replies
View Related
